diff mbox series

[PULL,11/24] hw/misc/bcm2835_thermal: Fix access size handling in bcm2835_thermal_ops

Message ID 20240711131822.3909903-12-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/24] target/arm: Correct comments about M-profile FPSCR | expand

Commit Message

Peter Maydell July 11, 2024, 1:18 p.m. UTC 
From: Zheyu Ma <zheyuma97@gmail.com>

The current implementation of bcm2835_thermal_ops sets
impl.max_access_size and valid.min_access_size to 4, but leaves
impl.min_access_size and valid.max_access_size unset, defaulting to 1.
This causes issues when the memory system is presented with an access
of size 2 at an offset of 3, leading to an attempt to synthesize it as
a pair of byte accesses at offsets 3 and 4, which trips an assert.

Additionally, the lack of valid.max_access_size setting causes another
issue: the memory system tries to synthesize a read using a 4-byte
access at offset 3 even though the device doesn't allow unaligned
accesses.

This patch addresses these issues by explicitly setting both
impl.min_access_size and valid.max_access_size to 4, ensuring proper
handling of access sizes.

Error log:
ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Bail out! ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Aborted

Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine raspi3b -m 1G -qtest stdio
readw 0x3f212003
EOF

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240702154042.3018932-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/bcm2835_thermal.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/hw/misc/bcm2835_thermal.c b/hw/misc/bcm2835_thermal.c
index ee7816b8a5d..0c49c088a79 100644
--- a/hw/misc/bcm2835_thermal.c
+++ b/hw/misc/bcm2835_thermal.c
@@ -80,8 +80,10 @@  static void bcm2835_thermal_write(void *opaque, hwaddr addr,
 static const MemoryRegionOps bcm2835_thermal_ops = {
     .read = bcm2835_thermal_read,
     .write = bcm2835_thermal_write,
+    .impl.min_access_size = 4,
     .impl.max_access_size = 4,
     .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };