diff mbox series

PCI/PM: Put devices to low power state on shutdown

Message ID 20240712062411.35732-1-kai.heng.feng@canonical.com
State New
Headers show
Series PCI/PM: Put devices to low power state on shutdown | expand

Commit Message

Kai-Heng Feng July 12, 2024, 6:24 a.m. UTC
Some laptops wake up after poweroff when HP Thunderbolt Dock G4 is
connected.

The following error message can be found during shutdown:
pcieport 0000:00:1d.0: AER: Correctable error message received from 0000:09:04.0
pcieport 0000:09:04.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID)
pcieport 0000:09:04.0:   device [8086:0b26] error status/mask=00000080/00002000
pcieport 0000:09:04.0:    [ 7] BadDLLP

Calling aer_remove() during shutdown can quiesce the error message,
however the spurious wakeup still happens.

The issue won't happen if the device is in D3 before system shutdown, so
putting device to low power state before shutdown to solve the issue.

I don't have a sniffer so this is purely guesswork, however I believe
putting device to low power state it's the right thing to do.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219036
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 drivers/pci/pci-driver.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Mario Limonciello Aug. 22, 2024, 7:28 p.m. UTC | #1
On 7/12/2024 01:24, Kai-Heng Feng wrote:
> Some laptops wake up after poweroff when HP Thunderbolt Dock G4 is
> connected.
> 
> The following error message can be found during shutdown:
> pcieport 0000:00:1d.0: AER: Correctable error message received from 0000:09:04.0
> pcieport 0000:09:04.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID)
> pcieport 0000:09:04.0:   device [8086:0b26] error status/mask=00000080/00002000
> pcieport 0000:09:04.0:    [ 7] BadDLLP
> 
> Calling aer_remove() during shutdown can quiesce the error message,
> however the spurious wakeup still happens.
> 
> The issue won't happen if the device is in D3 before system shutdown, so
> putting device to low power state before shutdown to solve the issue.
> 
> I don't have a sniffer so this is purely guesswork, however I believe
> putting device to low power state it's the right thing to do.

KH,

I did testing with your patch along with a few others, and found that it 
does the best job to put a majority of devices into a low power state 
properly.

I have the details of what happens at S5 outlined on this Gist:
https://gist.github.com/superm1/f8f81e52f5b1d55b64493fdaec38e31c

* KH column is this patch.
* ML column is 
https://lore.kernel.org/linux-usb/43594a1c-c0dd-4ae1-b2c4-f5198e3fe951@amd.com/T/#m03d0b36f86fb4722009b24a8ee547011128db80b
* FS column is 0fab972eef49 being applied again

I also have power testing data from an OEM's system that shows that it 
improves things well enough that a previously failing energy star 
certification is now passing.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>

> 
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219036
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
>   drivers/pci/pci-driver.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index af2996d0d17f..4c6f66f3eb54 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -510,6 +510,14 @@ static void pci_device_shutdown(struct device *dev)
>   	if (drv && drv->shutdown)
>   		drv->shutdown(pci_dev);
>   
> +	/*
> +	 * If driver already changed device's power state, it can mean the
> +	 * wakeup setting is in place, or a workaround is used. Hence keep it
> +	 * as is.
> +	 */
> +	if (!kexec_in_progress && pci_dev->current_state == PCI_D0)
> +		pci_prepare_to_sleep(pci_dev);
> +
>   	/*
>   	 * If this is a kexec reboot, turn off Bus Master bit on the
>   	 * device to tell it to not continue to do DMA. Don't touch
Kai-Heng Feng Aug. 26, 2024, 12:03 p.m. UTC | #2
On Fri, Aug 23, 2024 at 3:28 AM Mario Limonciello
<mario.limonciello@amd.com> wrote:
>
> On 7/12/2024 01:24, Kai-Heng Feng wrote:
> > Some laptops wake up after poweroff when HP Thunderbolt Dock G4 is
> > connected.
> >
> > The following error message can be found during shutdown:
> > pcieport 0000:00:1d.0: AER: Correctable error message received from 0000:09:04.0
> > pcieport 0000:09:04.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID)
> > pcieport 0000:09:04.0:   device [8086:0b26] error status/mask=00000080/00002000
> > pcieport 0000:09:04.0:    [ 7] BadDLLP
> >
> > Calling aer_remove() during shutdown can quiesce the error message,
> > however the spurious wakeup still happens.
> >
> > The issue won't happen if the device is in D3 before system shutdown, so
> > putting device to low power state before shutdown to solve the issue.
> >
> > I don't have a sniffer so this is purely guesswork, however I believe
> > putting device to low power state it's the right thing to do.
>
> KH,
>
> I did testing with your patch along with a few others, and found that it
> does the best job to put a majority of devices into a low power state
> properly.
>
> I have the details of what happens at S5 outlined on this Gist:
> https://gist.github.com/superm1/f8f81e52f5b1d55b64493fdaec38e31c
>
> * KH column is this patch.
> * ML column is
> https://lore.kernel.org/linux-usb/43594a1c-c0dd-4ae1-b2c4-f5198e3fe951@amd.com/T/#m03d0b36f86fb4722009b24a8ee547011128db80b
> * FS column is 0fab972eef49 being applied again
>
> I also have power testing data from an OEM's system that shows that it
> improves things well enough that a previously failing energy star
> certification is now passing.

Thanks a lot for the testing.

Bjorn, do you think this patch is in good form to get included in next -rc1?

Kai-Heng

>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> Tested-by: Mario Limonciello <mario.limonciello@amd.com>
>
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=219036
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
> >   drivers/pci/pci-driver.c | 8 ++++++++
> >   1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> > index af2996d0d17f..4c6f66f3eb54 100644
> > --- a/drivers/pci/pci-driver.c
> > +++ b/drivers/pci/pci-driver.c
> > @@ -510,6 +510,14 @@ static void pci_device_shutdown(struct device *dev)
> >       if (drv && drv->shutdown)
> >               drv->shutdown(pci_dev);
> >
> > +     /*
> > +      * If driver already changed device's power state, it can mean the
> > +      * wakeup setting is in place, or a workaround is used. Hence keep it
> > +      * as is.
> > +      */
> > +     if (!kexec_in_progress && pci_dev->current_state == PCI_D0)
> > +             pci_prepare_to_sleep(pci_dev);
> > +
> >       /*
> >        * If this is a kexec reboot, turn off Bus Master bit on the
> >        * device to tell it to not continue to do DMA. Don't touch
>
diff mbox series

Patch

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index af2996d0d17f..4c6f66f3eb54 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -510,6 +510,14 @@  static void pci_device_shutdown(struct device *dev)
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
 
+	/*
+	 * If driver already changed device's power state, it can mean the
+	 * wakeup setting is in place, or a workaround is used. Hence keep it
+	 * as is.
+	 */
+	if (!kexec_in_progress && pci_dev->current_state == PCI_D0)
+		pci_prepare_to_sleep(pci_dev);
+
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the
 	 * device to tell it to not continue to do DMA. Don't touch