diff mbox series

[v4,1/2] soc: qcom: smp2p: Use devname for interrupt descriptions

Message ID 20240716173835.997259-2-quic_sudeepgo@quicinc.com
State New
Headers show
Series [v4,1/2] soc: qcom: smp2p: Use devname for interrupt descriptions | expand

Commit Message

Sudeepgoud Patil July 16, 2024, 5:38 p.m. UTC 
From: Chris Lew <quic_clew@quicinc.com>

When using /proc/interrupts to collect statistics on smp2p interrupt
counts, it is hard to distinguish the different instances of smp2p from
each other. For example to debug a processor boot issue, the ready and
handover interrupts are checked for sanity to ensure the firmware
reached a specific initialization stage.

Remove "smp2p" string from the irq request so that the irq will default
to the device name. Add an .irq_print_chip() callback to print the irq
chip name as the device name. These two changes allow for a unique name
to be used in /proc/interrupts as shown below.

/ # cat /proc/interrupts | grep smp2p
 18:  ...      ipcc 196610 Edge      smp2p-adsp
 20:  ...      ipcc 131074 Edge      smp2p-modem
170:  ...  smp2p-modem   1 Edge      q6v5 ready
178:  ...  smp2p-adsp   1 Edge      q6v5 ready

Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Sudeepgoud Patil <quic_sudeepgo@quicinc.com>
---
 drivers/soc/qcom/smp2p.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--
diff mbox series

Patch

diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
index a21241cbeec7..696c2a8387d0 100644
--- a/drivers/soc/qcom/smp2p.c
+++ b/drivers/soc/qcom/smp2p.c
@@ -16,6 +16,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/soc/qcom/smem.h>
 #include <linux/soc/qcom/smem_state.h>
 #include <linux/spinlock.h>
@@ -353,11 +354,19 @@  static int smp2p_set_irq_type(struct irq_data *irqd, unsigned int type)
 	return 0;
 }
 
+static void smp2p_irq_print_chip(struct irq_data *irqd, struct seq_file *p)
+{
+	struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd);
+
+	seq_printf(p, " %8s", dev_name(entry->smp2p->dev));
+}
+
 static struct irq_chip smp2p_irq_chip = {
 	.name           = "smp2p",
 	.irq_mask       = smp2p_mask_irq,
 	.irq_unmask     = smp2p_unmask_irq,
 	.irq_set_type	= smp2p_set_irq_type,
+	.irq_print_chip = smp2p_irq_print_chip,
 };
 
 static int smp2p_irq_map(struct irq_domain *d,
@@ -617,7 +626,7 @@  static int qcom_smp2p_probe(struct platform_device *pdev)
 	ret = devm_request_threaded_irq(&pdev->dev, irq,
 					NULL, qcom_smp2p_intr,
 					IRQF_ONESHOT,
-					"smp2p", (void *)smp2p);
+					NULL, (void *)smp2p);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request interrupt\n");
 		goto unwind_interfaces;