@@ -12,7 +12,9 @@ SOC specific and Board specific properties are channel specific.
Required SoC Specific Properties:
- compatible: should be
- - samsung,exynos-dwmmc: for exynos platforms
+ - samsung,exynos4412-dw-mshc: for Exynos4 platforms
+ - samsung,exynos-dwmmc: for Exynos5 platforms
+ - samsung,exynos7-dw-mshc-smu: for Exynos7 platforms (with SMU block)
- reg: physical base address of the controller and length of memory mapped
region.
@@ -23,32 +25,38 @@ Required Board Specific Properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
-- samsung,bus-width: The width of the bus used to interface the devices
+- bus-width: The width of the bus used to interface the devices
supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
. Typically the bus width is 4 or 8.
-- samsung,timing: The timing values to be written into the
- Drv/sample clock selection register of corresponding channel.
- . It is comprised of 3 values corresponding to the 3 fileds
- 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
- . SelClk_sample: Select sample clock among 8 shifted clocks.
- . SelClk_drv: Select drv clock among 8 shifted clocks.
- . DIVRATIO: Clock Divide ratio select.
- . The above 3 values are used by the clock phase shifter.
+- samsung,dw-mshc-ciu-div: The divider value for the card interface unit (ciu)
+ clock (0..7).
+- samsung,dw-mshc-sdr-timing: The timing values for single data rate (SDR) mode
+ operation.
+ . First value is CIU clock phase shift value for TX mode (0..7).
+ . Second value is CIU clock phase shift value for RX mode (0..7).
+- samsung,dw-mshc-ddr-timing: The timing values for double data rate (DDR) mode
+ operation. If missing, values from samsung,dw-mshc-sdr-timing are used.
+ . First value is CIU clock phase shift value for TX mode (0..7).
+ . Second value is CIU clock phase shift value for RX mode (0..7).
Example:
mmc@12200000 {
- samsung,bus-width = <8>;
- samsung,timing = <1 3 3>;
- samsung,removable = <1>;
-}
+ bus-width = <8>;
+ non-removable;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <1 3>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+};
+
In the above example,
. The bus width is 8
- . Timing is comprised of 3 values as explained below
+ . Divider value for CLKSEL register is 3. The CIU clock rate will be
+ calculated as SDCLKIN / (3 + 1).
+ . SDR and DDR timings are comprised of 2 values as explained below
1 - SelClk_sample
3 - SelClk_drv
- 3 - DIVRATIO
- . The 'removable' flag indicates whether the the particilar device
+ . The 'non-removable' flag indicates whether the particular device
cannot be removed (always present) or it is a removable device.
- 1 - Indicates that the device is removable.
- 0 - Indicates that the device cannot be removed.
+ Flag is present - Indicates that the device cannot be removed.
+ Flag is not present - Indicates that the device is removable.
Update the bindings doc for Exynos DW MMC block to follow the upstream example and reflect the latest changes made in corresponding Linux kernel bindings. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- Changes in v3: - (none) Changes in v2: - (none) doc/device-tree-bindings/exynos/dwmmc.txt | 46 +++++++++++++---------- 1 file changed, 27 insertions(+), 19 deletions(-)