diff mbox series

[3/3] arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6

Message ID 20240814-lpass-v1-3-a5bb8f9dfa8b@freebox.fr
State New
Headers show
Series Add LPASS SMMU to msm8998 DTSI | expand

Commit Message

Marc Gonzalez Aug. 14, 2024, 4:20 p.m. UTC 
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Add support for the LPASS (Q6) SMMU and keep it disabled as this is
used only when the audio DSP is present and used, which is not
mandatory to have.

It is expected for board-specific device-trees to enable this node
if supported.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 111930c73ab8f..1537e42fa03ca 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1615,6 +1615,33 @@  gpucc: clock-controller@5065000 {
 				      "gpll0";
 		};
 
+		lpass_q6_smmu: iommu@5100000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			clocks = <&gcc HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+			clock-names = "iface";
+
+			#global-interrupts = <0>;
+			#iommu-cells = <1>;
+			interrupts =
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc LPASS_ADSP_GDSC>;
+			status = "disabled";
+		};
+
 		remoteproc_slpi: remoteproc@5800000 {
 			compatible = "qcom,msm8998-slpi-pas";
 			reg = <0x05800000 0x4040>;