diff mbox series

EDAC/qcom: Make irq configuration optional

Message ID 20240903060138.3191160-1-quic_rjendra@quicinc.com
State Accepted
Commit 0a97195d2181caced187acd7454464b8e37021d7
Headers show
Series EDAC/qcom: Make irq configuration optional | expand

Commit Message

Rajendra Nayak Sept. 3, 2024, 6:01 a.m. UTC 
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM realted irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')

On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.

Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.

Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
---
 drivers/edac/qcom_edac.c           | 8 +++++---
 drivers/soc/qcom/llcc-qcom.c       | 3 +++
 include/linux/soc/qcom/llcc-qcom.h | 2 ++
 3 files changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
index d3cd4cc54ace..96611ca09ac5 100644
--- a/drivers/edac/qcom_edac.c
+++ b/drivers/edac/qcom_edac.c
@@ -342,9 +342,11 @@  static int qcom_llcc_edac_probe(struct platform_device *pdev)
 	int ecc_irq;
 	int rc;
 
-	rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
-	if (rc)
-		return rc;
+	if (!llcc_driv_data->ecc_irq_configured) {
+		rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
+		if (rc)
+			return rc;
+	}
 
 	/* Allocate edac control info */
 	edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 8fa4ffd3a9b5..b1c0ae9991d6 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -139,6 +139,7 @@  struct qcom_llcc_config {
 	int size;
 	bool need_llcc_cfg;
 	bool no_edac;
+	bool irq_configured;
 };
 
 struct qcom_sct_config {
@@ -718,6 +719,7 @@  static const struct qcom_llcc_config x1e80100_cfg[] = {
 		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+		.irq_configured = true,
 	},
 };
 
@@ -1345,6 +1347,7 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 	drv_data->cfg = llcc_cfg;
 	drv_data->cfg_size = sz;
 	drv_data->edac_reg_offset = cfg->edac_reg_offset;
+	drv_data->ecc_irq_configured = cfg->irq_configured;
 	mutex_init(&drv_data->lock);
 	platform_set_drvdata(pdev, drv_data);
 
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 9e9f528b1370..acad1f4cf854 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -125,6 +125,7 @@  struct llcc_edac_reg_offset {
  * @num_banks: Number of llcc banks
  * @bitmap: Bit map to track the active slice ids
  * @ecc_irq: interrupt for llcc cache error detection and reporting
+ * @ecc_irq_configured: 'True' if firmware has already configured the irq propagation
  * @version: Indicates the LLCC version
  */
 struct llcc_drv_data {
@@ -139,6 +140,7 @@  struct llcc_drv_data {
 	u32 num_banks;
 	unsigned long *bitmap;
 	int ecc_irq;
+	bool ecc_irq_configured;
 	u32 version;
 };