diff mbox series

[PULL,12/27] kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()

Message ID 20240913151411.2167922-13-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/27] hw/s390/ccw-device: Convert to three-phase reset | expand

Commit Message

Peter Maydell Sept. 13, 2024, 3:13 p.m. UTC
From: Johannes Stoelp <johannes.stoelp@googlemail.com>

Change the data type of the ioctl _request_ argument from 'int' to
'unsigned long' for the various accel/kvm functions which are
essentially wrappers around the ioctl() syscall.

The correct type for ioctl()'s 'request' argument is confused:
 * POSIX defines the request argument as 'int'
 * glibc uses 'unsigned long' in the prototype in sys/ioctl.h
 * the glibc info documentation uses 'int'
 * the Linux manpage uses 'unsigned long'
 * the Linux implementation of the syscall uses 'unsigned int'

If we wrap ioctl() with another function which uses 'int' as the
type for the request argument, then requests with the 0x8000_0000
bit set will be sign-extended when the 'int' is cast to
'unsigned long' for the call to ioctl().

On x86_64 one such example is the KVM_IRQ_LINE_STATUS request.
Bit requests with the _IOC_READ direction bit set, will have the high
bit set.

Fortunately the Linux Kernel truncates the upper 32bit of the request
on 64bit machines (because it uses 'unsigned int', and see also Linus
Torvalds' comments in
  https://sourceware.org/bugzilla/show_bug.cgi?id=14362 )
so this doesn't cause active problems for us.  However it is more
consistent to follow the glibc ioctl() prototype when we define
functions that are essentially wrappers around ioctl().

This resolves a Coverity issue where it points out that in
kvm_get_xsave() we assign a value (KVM_GET_XSAVE or KVM_GET_XSAVE2)
to an 'int' variable which can't hold it without overflow.

Resolves: Coverity CID 1547759
Signed-off-by: Johannes Stoelp <johannes.stoelp@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20240815122747.3053871-1-peter.maydell@linaro.org
[PMM: Rebased patch, adjusted commit message, included note about
 Coverity fix, updated the type of the local var in kvm_get_xsave,
 updated the comment in the KVMState struct definition]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/sysemu/kvm.h     |  8 ++++----
 include/sysemu/kvm_int.h | 17 +++++++++++++----
 accel/kvm/kvm-all.c      |  8 ++++----
 target/i386/kvm/kvm.c    |  3 ++-
 accel/kvm/trace-events   |  8 ++++----
 5 files changed, 27 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 9cf14ca3d5b..613d3f7581f 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -235,11 +235,11 @@  static inline int kvm_update_guest_debug(CPUState *cpu, unsigned long reinject_t
 
 /* internal API */
 
-int kvm_ioctl(KVMState *s, int type, ...);
+int kvm_ioctl(KVMState *s, unsigned long type, ...);
 
-int kvm_vm_ioctl(KVMState *s, int type, ...);
+int kvm_vm_ioctl(KVMState *s, unsigned long type, ...);
 
-int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
+int kvm_vcpu_ioctl(CPUState *cpu, unsigned long type, ...);
 
 /**
  * kvm_device_ioctl - call an ioctl on a kvm device
@@ -248,7 +248,7 @@  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
  *
  * Returns: -errno on error, nonnegative on success
  */
-int kvm_device_ioctl(int fd, int type, ...);
+int kvm_device_ioctl(int fd, unsigned long type, ...);
 
 /**
  * kvm_vm_check_attr - check for existence of a specific vm attribute
diff --git a/include/sysemu/kvm_int.h b/include/sysemu/kvm_int.h
index 1d8fb1473bd..17483ff53bd 100644
--- a/include/sysemu/kvm_int.h
+++ b/include/sysemu/kvm_int.h
@@ -122,10 +122,19 @@  struct KVMState
     bool sync_mmu;
     bool guest_state_protected;
     uint64_t manual_dirty_log_protect;
-    /* The man page (and posix) say ioctl numbers are signed int, but
-     * they're not.  Linux, glibc and *BSD all treat ioctl numbers as
-     * unsigned, and treating them as signed here can break things */
-    unsigned irq_set_ioctl;
+    /*
+     * Older POSIX says that ioctl numbers are signed int, but in
+     * practice they are not. (Newer POSIX doesn't specify ioctl
+     * at all.) Linux, glibc and *BSD all treat ioctl numbers as
+     * unsigned, and real-world ioctl values like KVM_GET_XSAVE have
+     * bit 31 set, which means that passing them via an 'int' will
+     * result in sign-extension when they get converted back to the
+     * 'unsigned long' which the ioctl() prototype uses. Luckily Linux
+     * always treats the argument as an unsigned 32-bit int, so any
+     * possible sign-extension is deliberately ignored, but for
+     * consistency we keep to the same type that glibc is using.
+     */
+    unsigned long irq_set_ioctl;
     unsigned int sigmask_len;
     GHashTable *gsimap;
 #ifdef KVM_CAP_IRQ_ROUTING
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index 75d11a07b2b..beb1988d12c 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -3170,7 +3170,7 @@  int kvm_cpu_exec(CPUState *cpu)
     return ret;
 }
 
-int kvm_ioctl(KVMState *s, int type, ...)
+int kvm_ioctl(KVMState *s, unsigned long type, ...)
 {
     int ret;
     void *arg;
@@ -3188,7 +3188,7 @@  int kvm_ioctl(KVMState *s, int type, ...)
     return ret;
 }
 
-int kvm_vm_ioctl(KVMState *s, int type, ...)
+int kvm_vm_ioctl(KVMState *s, unsigned long type, ...)
 {
     int ret;
     void *arg;
@@ -3208,7 +3208,7 @@  int kvm_vm_ioctl(KVMState *s, int type, ...)
     return ret;
 }
 
-int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
+int kvm_vcpu_ioctl(CPUState *cpu, unsigned long type, ...)
 {
     int ret;
     void *arg;
@@ -3228,7 +3228,7 @@  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
     return ret;
 }
 
-int kvm_device_ioctl(int fd, int type, ...)
+int kvm_device_ioctl(int fd, unsigned long type, ...)
 {
     int ret;
     void *arg;
diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
index 2fa88ef1e37..ada581c5d6e 100644
--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -4102,7 +4102,8 @@  static int kvm_get_xsave(X86CPU *cpu)
 {
     CPUX86State *env = &cpu->env;
     void *xsave = env->xsave_buf;
-    int type, ret;
+    unsigned long type;
+    int ret;
 
     type = has_xsave2 ? KVM_GET_XSAVE2 : KVM_GET_XSAVE;
     ret = kvm_vcpu_ioctl(CPU(cpu), type, xsave);
diff --git a/accel/kvm/trace-events b/accel/kvm/trace-events
index 37626c1ac5d..82c65fd2ab8 100644
--- a/accel/kvm/trace-events
+++ b/accel/kvm/trace-events
@@ -1,11 +1,11 @@ 
 # See docs/devel/tracing.rst for syntax documentation.
 
 # kvm-all.c
-kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
-kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
-kvm_vcpu_ioctl(int cpu_index, int type, void *arg) "cpu_index %d, type 0x%x, arg %p"
+kvm_ioctl(unsigned long type, void *arg) "type 0x%lx, arg %p"
+kvm_vm_ioctl(unsigned long type, void *arg) "type 0x%lx, arg %p"
+kvm_vcpu_ioctl(int cpu_index, unsigned long type, void *arg) "cpu_index %d, type 0x%lx, arg %p"
 kvm_run_exit(int cpu_index, uint32_t reason) "cpu_index %d, reason %d"
-kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
+kvm_device_ioctl(int fd, unsigned long type, void *arg) "dev fd %d, type 0x%lx, arg %p"
 kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
 kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
 kvm_init_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"