| Message ID | 20240913123103.21226-6-kabel@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Turris Omnia LED driver changes | expand |
On Fri, Sep 13, 2024 at 02:30:57PM +0200, Marek Behún wrote: > Extend the cznic,turris-omnia-leds binding with interrupts property, > specifying the global LED brightness changed by button press interrupt. > > Signed-off-by: Marek Behún <kabel@kernel.org> > --- > .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml > index 34ef5215c150..f52f6304c79e 100644 > --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml > +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml > @@ -23,6 +23,12 @@ properties: > description: I2C slave address of the microcontroller. > maxItems: 1 > > + interrupts: > + description: > + Specifier for the global LED brightness changed by front button press > + interrupt. This "front button press" concerns me that you just hooked here gpio-key. Are you sure that this is the physical interrupt line going to this device? Best regards, Krzysztof
On 13/09/2024 14:30, Marek Behún wrote: > Extend the cznic,turris-omnia-leds binding with interrupts property, > specifying the global LED brightness changed by button press interrupt. > > Signed-off-by: Marek Behún <kabel@kernel.org> > --- Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 17/09/2024 09:08, Marek Behún wrote: > On Mon, Sep 16, 2024 at 04:33:13PM +0200, Krzysztof Kozlowski wrote: >> On Fri, Sep 13, 2024 at 02:30:57PM +0200, Marek Behún wrote: >>> Extend the cznic,turris-omnia-leds binding with interrupts property, >>> specifying the global LED brightness changed by button press interrupt. >>> >>> Signed-off-by: Marek Behún <kabel@kernel.org> >>> --- >>> .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++ >>> 1 file changed, 8 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml >>> index 34ef5215c150..f52f6304c79e 100644 >>> --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml >>> +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml >>> @@ -23,6 +23,12 @@ properties: >>> description: I2C slave address of the microcontroller. >>> maxItems: 1 >>> >>> + interrupts: >>> + description: >>> + Specifier for the global LED brightness changed by front button press >>> + interrupt. >> >> This "front button press" concerns me that you just hooked here >> gpio-key. Are you sure that this is the physical interrupt line going to >> this device? > > No no no, that is a different interrupt from the gpio-key. > > The button can be configure in two modes: > > - it can act like a GPIO to the CPU, forwarding press and release events > via the GPIO chip (so button press it is handled by CPU) > - can be set with > echo cpu >/sys/bus/i2c/devices/1-002a/front_button_mode > - pressing it will generate the INT_BUTTON_PRESSED interrupt from the > MCU > > - it can change LED panel brightness (so button press is handled by MCU) > - this is the default mode, configured after boot > - can be set with > echo mcu >/sys/bus/i2c/devices/1-002a/front_button_mode > - pressing it will generate the INT_BRIGHTNESS_CHANGED interrupt > > The INT_BUTTON_PRESSED and INT_BRIGHTNESS_CHANGED interrupt semantically > different (and also literally, they are at different bits). See > https://gitlab.nic.cz/turris/hw/omnia_hw_ctrl/-/blob/master/src/drivers/i2c_iface.h?ref_type=heads#L289-L321 That's fine, thanks for the explanation. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index 34ef5215c150..f52f6304c79e 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -23,6 +23,12 @@ properties: description: I2C slave address of the microcontroller. maxItems: 1 + interrupts: + description: + Specifier for the global LED brightness changed by front button press + interrupt. + maxItems: 1 + "#address-cells": const: 1 @@ -56,6 +62,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> i2c { @@ -65,6 +72,7 @@ examples: led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>;
Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt. Signed-off-by: Marek Behún <kabel@kernel.org> --- .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)