diff mbox

[edk2,v8,1/4] MmcDxe: add interface in mmc host protocol

Message ID 1479908184-9406-2-git-send-email-haojian.zhuang@linaro.org
State New
Headers show

Commit Message

Haojian Zhuang Nov. 23, 2016, 1:36 p.m. UTC
Add the interface to change the bus width, speed and check multi blocks.

By default, MMC is initialized with 1-bit mode and less than 400KHz bus
clock. It causes MMC working inefficiently.

Set io bus width on both MMC controller and EXTCSD. Otherwise, it may
cause unmatched failure case. And support more timing mode, high speed,
HS200 & HS400 mode.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Tested-by: Ryan Harkin <ryan.harkin@linaro.org>

---
 EmbeddedPkg/Include/Protocol/MmcHost.h           |  31 +++-
 EmbeddedPkg/Universal/MmcDxe/Mmc.h               |   5 +
 EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 185 ++++++++++++++++++++++-
 3 files changed, 217 insertions(+), 4 deletions(-)

-- 
2.7.4

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
diff mbox

Patch

diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index 89f2e80..4f0a7b4 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -49,6 +49,7 @@  typedef UINT32 MMC_CMD;
 #define MMC_CMD2              (MMC_INDX(2) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
 #define MMC_CMD3              (MMC_INDX(3) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD5              (MMC_INDX(5) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_CMD6              (MMC_INDX(6) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD7              (MMC_INDX(7) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD8              (MMC_INDX(8) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD9              (MMC_INDX(9) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
@@ -82,6 +83,16 @@  typedef enum _MMC_STATE {
     MmcDisconnectState,
 } MMC_STATE;
 
+#define EMMCBACKWARD         (0)
+#define EMMCHS26             (1 << 0)      // High-Speed @26MHz at rated device voltages
+#define EMMCHS52             (1 << 1)      // High-Speed @52MHz at rated device voltages
+#define EMMCHS52DDR1V8       (1 << 2)      // High-Speed Dual Data Rate @52MHz 1.8V or 3V I/O
+#define EMMCHS52DDR1V2       (1 << 3)      // High-Speed Dual Data Rate @52MHz 1.2V I/O
+#define EMMCHS200SDR1V8      (1 << 4)      // HS200 Single Data Rate @200MHz 1.8V I/O
+#define EMMCHS200SDR1V2      (1 << 5)      // HS200 Single Data Rate @200MHz 1.2V I/O
+#define EMMCHS400DDR1V8      (1 << 6)      // HS400 Dual Data Rate @400MHz 1.8V I/O
+#define EMMCHS400DDR1V2      (1 << 7)      // HS400 Dual Data Rate @400MHz 1.2V I/O
+
 ///
 /// Forward declaration for EFI_MMC_HOST_PROTOCOL
 ///
@@ -131,6 +142,16 @@  typedef EFI_STATUS (EFIAPI *MMC_WRITEBLOCKDATA) (
   IN  UINT32                    *Buffer
   );
 
+typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
+  IN  EFI_MMC_HOST_PROTOCOL     *This,
+  IN  UINT32                    BusClockFreq,
+  IN  UINT32                    BusWidth,
+  IN  UINT32                    TimingMode
+  );
+
+typedef BOOLEAN (EFIAPI *MMC_ISMULTIBLOCK) (
+  IN  EFI_MMC_HOST_PROTOCOL     *This
+  );
 
 struct _EFI_MMC_HOST_PROTOCOL {
 
@@ -147,9 +168,17 @@  struct _EFI_MMC_HOST_PROTOCOL {
   MMC_READBLOCKDATA       ReadBlockData;
   MMC_WRITEBLOCKDATA      WriteBlockData;
 
+  MMC_SETIOS              SetIos;
+  MMC_ISMULTIBLOCK        IsMultiBlock;
+
 };
 
-#define MMC_HOST_PROTOCOL_REVISION    0x00010001    // 1.1
+#define MMC_HOST_PROTOCOL_REVISION    0x00010002    // 1.2
+
+#define MMC_HOST_HAS_SETIOS(Host)     (Host->Revision >= MMC_HOST_PROTOCOL_REVISION && \
+                                       Host->SetIos != NULL)
+#define MMC_HOST_HAS_ISMULTIBLOCK(Host) (Host->Revision >= MMC_HOST_PROTOCOL_REVISION && \
+                                         Host->IsMultiBlock != NULL)
 
 extern EFI_GUID gEfiMmcHostProtocolGuid;
 
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index 112bc47..fb3f6c9 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -55,6 +55,11 @@ 
 #define MMC_R0_STATE_TRAN       4
 #define MMC_R0_STATE_DATA       5
 
+#define EMMC_CMD6_ARG_ACCESS(x)             (((x) & 0x3) << 24)
+#define EMMC_CMD6_ARG_INDEX(x)              (((x) & 0xFF) << 16)
+#define EMMC_CMD6_ARG_VALUE(x)              (((x) & 0xFF) << 8)
+#define EMMC_CMD6_ARG_CMD_SET(x)            (((x) & 0x7) << 0)
+
 typedef enum {
   UNKNOWN_CARD,
   MMC_CARD,              //MMC card
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 9aefb26..7441459 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -25,11 +25,111 @@  typedef union {
 #define EMMC_CARD_SIZE          512
 #define EMMC_ECSD_SIZE_OFFSET   53
 
+#define EXTCSD_BUS_WIDTH        183
+#define EXTCSD_HS_TIMING        185
+
+#define EMMC_TIMING_BACKWARD    0
+#define EMMC_TIMING_HS          1
+#define EMMC_TIMING_HS200       2
+#define EMMC_TIMING_HS400       3
+
+#define EMMC_BUS_WIDTH_1BIT     0
+#define EMMC_BUS_WIDTH_4BIT     1
+#define EMMC_BUS_WIDTH_8BIT     2
+#define EMMC_BUS_WIDTH_DDR_4BIT 5
+#define EMMC_BUS_WIDTH_DDR_8BIT 6
+
+#define EMMC_SWITCH_ERROR       (1 << 7)
+
+#define DEVICE_STATE(x)         (((x) >> 9) & 0xf)
+typedef enum _EMMC_DEVICE_STATE {
+  EMMC_IDLE_STATE = 0,
+  EMMC_READY_STATE,
+  EMMC_IDENT_STATE,
+  EMMC_STBY_STATE,
+  EMMC_TRAN_STATE,
+  EMMC_DATA_STATE,
+  EMMC_RCV_STATE,
+  EMMC_PRG_STATE,
+  EMMC_DIS_STATE,
+  EMMC_BTST_STATE,
+  EMMC_SLP_STATE
+} EMMC_DEVICE_STATE;
+
 UINT32 mEmmcRcaCount = 0;
 
 STATIC
 EFI_STATUS
 EFIAPI
+EmmcGetDeviceState (
+  IN  MMC_HOST_INSTANCE    *MmcHostInstance,
+  OUT EMMC_DEVICE_STATE    *State
+  )
+{
+  EFI_MMC_HOST_PROTOCOL *Host;
+  EFI_STATUS Status;
+  UINT32     Data, RCA;
+
+  if (State == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Host = MmcHostInstance->MmcHost;
+  RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
+  Status = Host->SendCommand (Host, MMC_CMD13, RCA);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
+    return Status;
+  }
+  Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, &Data);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
+    return Status;
+  }
+  if (Data & EMMC_SWITCH_ERROR) {
+    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
+    return EFI_DEVICE_ERROR;
+  }
+  *State = DEVICE_STATE(Data);
+  return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+EmmcSetEXTCSD (
+  IN MMC_HOST_INSTANCE     *MmcHostInstance,
+  UINT32                   ExtCmdIndex,
+  UINT32                   Value
+  )
+{
+  EFI_MMC_HOST_PROTOCOL *Host;
+  EMMC_DEVICE_STATE     State;
+  EFI_STATUS Status;
+  UINT32     Argument;
+
+  Host  = MmcHostInstance->MmcHost;
+  Argument = EMMC_CMD6_ARG_ACCESS(3) | EMMC_CMD6_ARG_INDEX(ExtCmdIndex) |
+             EMMC_CMD6_ARG_VALUE(Value) | EMMC_CMD6_ARG_CMD_SET(1);
+  Status = Host->SendCommand (Host, MMC_CMD6, Argument);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "EmmcSetEXTCSD(): Failed to send CMD6, Status=%r.\n", Status));
+    return Status;
+  }
+  // Make sure device exiting prog mode
+  do {
+    Status = EmmcGetDeviceState (MmcHostInstance, &State);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "EmmcSetEXTCSD(): Failed to get device state, Status=%r.\n", Status));
+      return Status;
+    }
+  } while (State == EMMC_PRG_STATE);
+  return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
 EmmcIdentificationMode (
   IN MMC_HOST_INSTANCE     *MmcHostInstance,
   IN OCR_RESPONSE           Response
@@ -38,6 +138,7 @@  EmmcIdentificationMode (
   EFI_MMC_HOST_PROTOCOL *Host;
   EFI_BLOCK_IO_MEDIA    *Media;
   EFI_STATUS Status;
+  EMMC_DEVICE_STATE     State;
   UINT32     RCA;
 
   Host  = MmcHostInstance->MmcHost;
@@ -84,6 +185,22 @@  EmmcIdentificationMode (
     DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Card selection error, Status=%r.\n", Status));
   }
 
+  if (MMC_HOST_HAS_SETIOS(Host)) {
+    // Set 1-bit bus width
+    Status = Host->SetIos (Host, 0, 1, EMMCBACKWARD);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set 1-bit bus width error, Status=%r.\n", Status));
+      return Status;
+    }
+
+    // Set 1-bit bus width for EXTCSD
+    Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_1BIT);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set extcsd bus width error, Status=%r.\n", Status));
+      return Status;
+    }
+  }
+
   // Fetch ECSD
   Status = Host->SendCommand (Host, MMC_CMD8, RCA);
   if (EFI_ERROR (Status)) {
@@ -96,6 +213,15 @@  EmmcIdentificationMode (
     return Status;
   }
 
+  // Make sure device exiting data mode
+  do {
+    Status = EmmcGetDeviceState (MmcHostInstance, &State);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Failed to get device state, Status=%r.\n", Status));
+      return Status;
+    }
+  } while (State == EMMC_DATA_STATE);
+
   // Set up media
   Media->BlockSize = EMMC_CARD_SIZE; // 512-byte support is mandatory for eMMC cards
   Media->MediaId = MmcHostInstance->CardInfo.CIDData.PSN;
@@ -113,6 +239,57 @@  EmmcIdentificationMode (
 
 STATIC
 EFI_STATUS
+InitializeEmmcDevice (
+  IN  MMC_HOST_INSTANCE   *MmcHostInstance
+  )
+{
+  EFI_MMC_HOST_PROTOCOL *Host;
+  EFI_STATUS Status = EFI_SUCCESS;
+  ECSD       *ECSDData;
+  UINT32     BusClockFreq, Idx;
+  UINT32     TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
+
+  Host  = MmcHostInstance->MmcHost;
+  ECSDData = &MmcHostInstance->CardInfo.ECSDData;
+  if (ECSDData->DEVICE_TYPE == EMMCBACKWARD)
+    return EFI_SUCCESS;
+
+  if (!MMC_HOST_HAS_SETIOS(Host)) {
+    return EFI_SUCCESS;
+  }
+  Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_HS_TIMING, EMMC_TIMING_HS);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to switch high speed mode, Status:%r.\n", Status));
+    return Status;
+  }
+
+  for (Idx = 0; Idx < 4; Idx++) {
+    switch (TimingMode[Idx]) {
+    case EMMCHS52DDR1V2:
+    case EMMCHS52DDR1V8:
+    case EMMCHS52:
+      BusClockFreq = 52000000;
+      break;
+    case EMMCHS26:
+      BusClockFreq = 26000000;
+      break;
+    default:
+      return EFI_UNSUPPORTED;
+    }
+    Status = Host->SetIos (Host, BusClockFreq, 8, TimingMode[Idx]);
+    if (!EFI_ERROR (Status)) {
+      Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_DDR_8BIT);
+      if (EFI_ERROR (Status)) {
+        DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to set EXTCSD bus width, Status:%r\n", Status));
+      }
+      return Status;
+    }
+  }
+  return Status;
+}
+
+STATIC
+EFI_STATUS
 InitializeSdMmcDevice (
   IN  MMC_HOST_INSTANCE   *MmcHostInstance
   )
@@ -431,9 +608,11 @@  InitializeMmcDevice (
 
   if (MmcHostInstance->CardInfo.CardType != EMMC_CARD) {
     Status = InitializeSdMmcDevice (MmcHostInstance);
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
+  } else {
+    Status = InitializeEmmcDevice (MmcHostInstance);
+  }
+  if (EFI_ERROR (Status)) {
+    return Status;
   }
 
   // Set Block Length