diff mbox series

[v2] Bluetooth: btusb: Add 3 HWIDs for MT7925

Message ID 20241104145931.5019-1-jiande.lu@mediatek.com
State New
Headers show
Series [v2] Bluetooth: btusb: Add 3 HWIDs for MT7925 | expand

Commit Message

Jiande Lu Nov. 4, 2024, 2:59 p.m. UTC 
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip.
VID 0x0489, PID 0xe14f
VID 0x0489, PID 0xe150
VID 0x0489, PID 0xe151

Patch has been tested successfully and controller is recognized
device pair successfully.

MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

v2: update commit message.

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
---
 drivers/bluetooth/btusb.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6dc5a7e76558..77b8500f8e9b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -658,6 +658,12 @@  static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |