diff mbox

[Linaro-uefi,linaro-uefi,v5,26/44] D03/ACPI: Add support of RoCE Reset in DSDT

Message ID 1480652017-31676-27-git-send-email-heyi.guo@linaro.org
State Superseded
Headers show

Commit Message

gary guo Dec. 2, 2016, 4:13 a.m. UTC
In the Hip06 SoC, the RoCE Engine is part of the HiSilicon
Network Subsystem and is dependent upon DSAF module. Therefore,
certain functions like RESET are exposed through the common
registers of HNS module which are memory-mapped by the HNS
driver and currently can only be accessed through DT/syscon
interface.

This patch adds the support of the RoCE Reset functionality
through ACPI interface. This functionality would be exposed to
the HiSilicon HNS Driver using the _DSM() ACPI Method. This
method shall be called by the wrapper API in HNS driver.
Further, HiSilicon RoCE driver shall call the HNS Driver
exported RoCE Reset API.

In this patch, DSDT ACPI Table have been amended to facilitate
such support.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
 .../Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl        | 79 +++++++++++++++++++++-
 1 file changed, 77 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
index 5997910..57d28cf 100644
--- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
+++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
@@ -115,6 +115,33 @@  Scope(_SB)
           , 31,  //RESERVED
         }
 
+    // DSAF Channel RESET
+    OperationRegion(DCRR, SystemMemory, 0xC0000AA8, 8)
+    Field(DCRR, DWordAcc, NoLock, Preserve) {
+          DCRE, 1,
+          , 31,  //RESERVED
+          DCRD, 1,
+          , 31,  //RESERVED
+        }
+
+    // RoCE RESET
+    OperationRegion(RKRR, SystemMemory, 0xC0000A50, 8)
+    Field(RKRR, DWordAcc, NoLock, Preserve) {
+          RKRE, 1,
+          , 31,  //RESERVED
+          RKRD, 1,
+          , 31,  //RESERVED
+        }
+
+    // RoCE Clock enable/disable
+    OperationRegion(RKCR, SystemMemory, 0xC0000328, 8)
+    Field(RKCR, DWordAcc, NoLock, Preserve) {
+          RCLE, 1,
+          , 31,  //RESERVED
+          RCLD, 1,
+          , 31,  //RESERVED
+        }
+
     // Hilink access sel cfg reg
     OperationRegion(HSER, SystemMemory, 0xC2240008, 0x4)
     Field(HSER, DWordAcc, NoLock, Preserve) {
@@ -254,6 +281,30 @@  Scope(_SB)
       }
     }
 
+    //reset DSAF channels
+    //Arg0 : mask
+    //Arg1 : 0 reset, 1 de-reset
+    Method(DCRT, 2, Serialized) {
+      If (LEqual (Arg1, 0)) {
+        Store(Arg0, DCRE)
+      } Else  {
+        Store(Arg0, DCRD)
+      }
+    }
+
+    //reset RoCE
+    //Arg0 : 0 reset, 1 de-reset
+    Method(RRST, 1, Serialized) {
+      If (LEqual (Arg0, 0)) {
+        Store(0x1, RKRE)
+      } Else  {
+        Store(0x1, RCLD)
+        Store(0x1, RKRD)
+        sleep(20)
+        Store(0x1, RCLE)
+      }
+    }
+
     // Set Serdes Loopback
     //Arg0 : port
     //Arg1 : 0 disable, 1 enable
@@ -307,7 +358,7 @@  Scope(_SB)
     }
 
     //Reset
-    //Arg0 : reset type (1: dsaf; 2: ppe; 3:XGE core; 4:XGE; 5:G3)
+    //Arg0 : reset type (1: dsaf; 2: ppe; 3:xge core; 4:xge; 5:ge; 6:dchan; 7:roce)
     //Arg1 : port
     //Arg2 : 0 disable, 1 enable
     Method(DRST, 3, Serialized)
@@ -363,6 +414,22 @@  Scope(_SB)
           Store (Arg2, Local1)
           GRST (Local0, Local1)
         }
+
+        //Reset DSAF Channels
+        case (0x6)
+        {
+          Store (Arg1, Local0)
+          Store (Arg2, Local1)
+          DCRT (Local0, Local1)
+        }
+
+        //Reset RoCE
+        case (0x7)
+        {
+          // Discarding Arg1 as it is always 0
+          Store (Arg2, Local0)
+          RRST (Local0)
+        }
       }
     }
 
@@ -373,7 +440,7 @@  Scope(_SB)
     // Arg2: Integer Function Index
     //   0 : Return Supported Functions bit mask
     //   1 : Reset Sequence
-    //    Arg3[0] : reset type (1:dsaf; 2:ppe; 3:xge core; 4:xge; 5: ge)
+    //    Arg3[0] : reset type (1:dsaf; 2:ppe; 3:xge core; 4:xge; 5:ge; 6:dchan; 7:roce)
     //    Arg3[1] : port index in dsaf
     //    Arg3[2] : 0 reset, 1 cancle reset
     //   2 : Set Serdes Loopback
@@ -611,5 +678,13 @@  Scope(_SB)
           746, 747, 748, 749, 750, 751, 752, 753, 785, 754,
         }
    })
+    Name (_PRS, ResourceTemplate (){
+      Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive,,,)
+        {
+          722, 723, 724, 725, 726, 727, 728, 729, 730, 731, 732, 733,
+          734, 735, 736, 737, 738, 739, 740, 741, 742, 743, 744, 745,
+          746, 747, 748, 749, 750, 751, 752, 753, 785, 754,
+        }
+   })
  }
 }