diff mbox

mmci: force negative edge on clock bypass for ux500

Message ID 1301577129-28514-1-git-send-email-linus.walleij@stericsson.com
State Accepted
Commit 399bc4863e2a3b4b255ca22189820c81ca34f4e0
Headers show

Commit Message

Linus Walleij March 31, 2011, 1:12 p.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>

This fixes a regression on high clock speeds with the MMCI on
ux500. We need to make sure we derive the passthru clock on the
falling edge of the incoming clock if it shall work at high
frequencies, and on the ux500's there is a special bit for this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/host/mmci.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index bda958b..5da5bea 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -116,6 +116,8 @@  static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	if (desired) {
 		if (desired >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
+			if (variant->st_clkdiv)
+				clk |= MCI_ST_UX500_NEG_EDGE;
 			host->cclk = host->mclk;
 		} else if (variant->st_clkdiv) {
 			/*