diff mbox series

[v3,1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"

Message ID 20250415-revert_hs_phy_settings-v3-1-3a8f86211b59@oss.qualcomm.com
State New
Headers show
Series [v3,1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424" | expand

Commit Message

Kathiravan Thirumoorthy April 15, 2025, 4:22 a.m. UTC 
With the current settings, compliance tests especially eye diagram
(Host High-speed Signal Quality) tests are failing. Reuse the IPQ6018
settings to overcome this issue, as mentioned in the Hardware Design
Document.

So revert the change which introduced the new settings and reuse the
IPQ6018 settings in the subsequent patch.

Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 ----------------------------
 1 file changed, 28 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 1f5f7df14d5a2ff041fe15aaeb6ec5ce52ab2a81..81b9e9349c3ebb4d303cb040b5c913336bb6b6d6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -151,21 +151,6 @@  static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
 };
 
-static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
-};
-
 static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xc8),
 	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
@@ -359,16 +344,6 @@  static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
 	.autoresume_en   = BIT(0),
 };
 
-static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
-	.tbl            = ipq5424_init_tbl,
-	.tbl_num        = ARRAY_SIZE(ipq5424_init_tbl),
-	.regs           = ipq6018_regs_layout,
-
-	.disable_ctrl   = POWER_DOWN,
-	.mask_core_ready = PLL_LOCKED,
-	.autoresume_en   = BIT(0),
-};
-
 static const struct qusb2_phy_cfg qcs615_phy_cfg = {
 	.tbl            = qcs615_init_tbl,
 	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
@@ -954,9 +929,6 @@  static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
-		.compatible	= "qcom,ipq5424-qusb2-phy",
-		.data		= &ipq5424_phy_cfg,
-	}, {
 		.compatible	= "qcom,ipq6018-qusb2-phy",
 		.data		= &ipq6018_phy_cfg,
 	}, {