diff mbox series

[v3,2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424

Message ID 20250415-revert_hs_phy_settings-v3-2-3a8f86211b59@oss.qualcomm.com
State New
Headers show
Series Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424 | expand

Commit Message

Kathiravan Thirumoorthy April 15, 2025, 4:22 a.m. UTC 
With the settings used in the commit 9c56a1de296e ("phy: qcom-qusb2: add
QUSB2 support for IPQ5424"), compliance test cases especially
eye-diagram (Host High-speed Signal Quality) tests are failing.

Reuse the IPQ6018 settings for IPQ5424 as mentioned in the Hardware
Design Document which helps to meet all the complaince requirement test
cases.

Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 81b9e9349c3ebb4d303cb040b5c913336bb6b6d6..49c37c53b38e70db2a1591081a1a12db7092555d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -929,6 +929,9 @@  static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
+		.compatible	= "qcom,ipq5424-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,ipq6018-qusb2-phy",
 		.data		= &ipq6018_phy_cfg,
 	}, {