diff mbox series

[v2] bus: mhi: host: pci: Disable runtime PM for QDU100

Message ID 20250418-vdev_next-20250411_pm_disable-v2-1-27dd8d433f3b@quicinc.com
State New
Headers show
Series [v2] bus: mhi: host: pci: Disable runtime PM for QDU100 | expand

Commit Message

Vivek Pernamitta April 18, 2025, 11:50 a.m. UTC 
The QDU100 device does not support the MHI M3 state, necessitating the
disabling of runtime PM for this device. It is essential to disable
runtime PM if the device does not support Low Power Mode (LPM).

Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
---
Changes in v2:
- Updated device from getting runtime suspended by avoid skipping autosuspend.
- Updated commit message.
- Link to v1: https://lore.kernel.org/r/20250414-vdev_next-20250411_pm_disable-v1-1-e963677636ca@quicinc.com
---
 drivers/bus/mhi/host/pci_generic.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)


---
base-commit: 01c6df60d5d4ae00cd5c1648818744838bba7763
change-id: 20250414-vdev_next-20250411_pm_disable-53d5e1acd45e

Best regards,
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 03aa887952098661a488650053a357f883d1559b..bec1ca17ad69ac89e2ea9142024fef8bded258b6 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -43,6 +43,7 @@ 
  * @mru_default: default MRU size for MBIM network packets
  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
  *		   of inband wake support (such as sdx24)
+ * @pm_disable: disables runtime PM (optional)
  */
 struct mhi_pci_dev_info {
 	const struct mhi_controller_config *config;
@@ -54,6 +55,7 @@  struct mhi_pci_dev_info {
 	unsigned int dma_data_width;
 	unsigned int mru_default;
 	bool sideband_wake;
+	bool pm_disable;
 };
 
 #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
@@ -295,6 +297,7 @@  static const struct mhi_pci_dev_info mhi_qcom_qdu100_info = {
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
 	.sideband_wake = false,
+	.pm_disable = true,
 };
 
 static const struct mhi_channel_config mhi_qcom_sa8775p_channels[] = {
@@ -1270,8 +1273,11 @@  static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* start health check */
 	mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
 
-	/* Only allow runtime-suspend if PME capable (for wakeup) */
-	if (pci_pme_capable(pdev, PCI_D3hot)) {
+	/**
+	 * Disable Runtime PM if device doesn't support MHI M3 state
+	 * and Allow runtime-suspend if PME capable (for wakeup)
+	 */
+	if (pci_pme_capable(pdev, PCI_D3hot) && !(info->pm_disable)) {
 		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 		pm_runtime_use_autosuspend(&pdev->dev);
 		pm_runtime_mark_last_busy(&pdev->dev);