diff mbox series

[v5,08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

Message ID 20250421-sm8750_usb_master-v5-8-25c79ed01d02@oss.qualcomm.com
State New
Headers show
Series phy: qcom: Introduce USB support for SM8750 | expand

Commit Message

Melody Olvera April 21, 2025, 10 p.m. UTC 
From: Wesley Cheng <quic_wcheng@quicinc.com>

Enable USB support on SM8750 MTP variants.  The current definition will
start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 72f081a890dfe49bfbee5e91b9e51da53b9d8baf..d28e45111b8d01c2753493a7a4ee248bbb334aa8 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -814,3 +814,27 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};