@@ -683,6 +683,15 @@ config MMC_DW_ROCKCHIP
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on RK3066, RK3188 and RK3288 SoC's.
+config MMC_DW_ZX
+ tristate "ZTE specific extensions for Synopsys DW Memory Card Interface"
+ depends on MMC_DW && ARCH_ZX
+ select MMC_DW_PLTFM
+ help
+ This selects support for ZTE SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on ZX296718 SoC's.
+
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
depends on HAS_DMA
@@ -48,6 +48,7 @@ obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o
+obj-$(CONFIG_MMC_DW_ZX) += dw_mmc-zx.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
obj-$(CONFIG_MMC_VUB300) += vub300.o
new file mode 100644
@@ -0,0 +1,242 @@
+/*
+ * ZX Specific Extensions for Synopsys DW Multimedia Card Interface driver
+ *
+ * Copyright (C) 2016, Linaro Ltd.
+ * Copyright (C) 2016, ZTE Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+#include "dw_mmc-zx.h"
+
+struct dw_mci_zx_priv_data {
+ struct regmap *sysc_base;
+};
+
+enum delay_type {
+ DELAY_TYPE_READ, /* read dqs delay */
+ DELAY_TYPE_CLK, /* clk sample delay */
+};
+
+static int dw_mci_zx_emmc_set_delay(struct dw_mci *host, unsigned int delay,
+ enum delay_type dflag)
+{
+ struct dw_mci_zx_priv_data *priv = host->priv;
+ struct regmap *sysc_base = priv->sysc_base;
+ unsigned int clksel;
+ unsigned int loop = 1000;
+ int ret;
+
+ if (!sysc_base)
+ return -EINVAL;
+
+ ret = regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0,
+ PARA_HALF_CLK_MODE | PARA_DLL_BYPASS_MODE |
+ PARA_PHASE_DET_SEL_MASK |
+ PARA_DLL_LOCK_NUM_MASK |
+ DLL_REG_SET | PARA_DLL_START_MASK,
+ PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4));
+ if (ret)
+ return ret;
+
+ ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG1, &clksel);
+ if (ret)
+ return ret;
+
+ if (dflag == DELAY_TYPE_CLK) {
+ clksel &= ~CLK_SAMP_DELAY_MASK;
+ clksel |= CLK_SAMP_DELAY(delay);
+ } else {
+ clksel &= ~READ_DQS_DELAY_MASK;
+ clksel |= READ_DQS_DELAY(delay);
+ }
+
+ regmap_write(sysc_base, LB_AON_EMMC_CFG_REG1, clksel);
+ regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0,
+ PARA_DLL_START_MASK | PARA_DLL_LOCK_NUM_MASK |
+ DLL_REG_SET,
+ PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4) |
+ DLL_REG_SET);
+
+ do {
+ ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG2, &clksel);
+ if (ret)
+ return ret;
+
+ } while (--loop && !(clksel & ZX_DLL_LOCKED));
+
+ if (!loop) {
+ dev_err(host->dev, "Error: %s dll lock fail\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int dw_mci_zx_emmc_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+ struct dw_mci *host = slot->host;
+ struct mmc_host *mmc = slot->mmc;
+ int ret, len, start = 0, end = 0, delay, best = 0;
+
+ for (delay = 1 ; delay < 128; delay++) {
+ ret = dw_mci_zx_emmc_set_delay(host, delay, DELAY_TYPE_CLK);
+ if (!ret && mmc_send_tuning(mmc, opcode, NULL)) {
+ if (start >= 0) {
+ end = delay - 1;
+ /* check and update longest good range */
+ if ((end - start) > len) {
+ best = (start + end) >> 1;
+ len = end - start;
+ }
+ }
+ start = -1;
+ end = 0;
+ continue;
+ }
+ if (start < 0)
+ start = delay;
+ }
+
+ if (start >= 0) {
+ end = delay - 1;
+ if ((end - start) > len) {
+ best = (start + end) >> 1;
+ len = end - start;
+ }
+ }
+ if (best < 0)
+ return -EIO;
+
+ dev_info(host->dev, "%s best range: start %d end %d\n", __func__,
+ start, end);
+ return dw_mci_zx_emmc_set_delay(host, best, DELAY_TYPE_CLK);
+}
+
+static int dw_mci_zx_prepare_hs400_tuning(struct dw_mci *host,
+ struct mmc_ios *ios)
+{
+ int ret;
+
+ /* config phase shift as 90 degree */
+ ret = dw_mci_zx_emmc_set_delay(host, 32, DELAY_TYPE_READ);
+ if (ret < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int dw_mci_zx_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+ struct dw_mci *host = slot->host;
+
+ if (host->verid == 0x290a) /* only for emmc */
+ return dw_mci_zx_emmc_execute_tuning(slot, opcode);
+ /* TODO: Add 0x210a dedicated tuning for sd/sdio */
+
+ return 0;
+}
+
+static int dw_mci_zx_parse_dt(struct dw_mci *host)
+{
+ struct device_node *np = host->dev->of_node;
+ struct device_node *node;
+ struct dw_mci_zx_priv_data *priv;
+ struct regmap *sysc_base;
+ int ret;
+
+ /* syscon is needed only by emmc */
+ node = of_parse_phandle(np, "zte,aon-syscon", 0);
+ if (node) {
+ sysc_base = syscon_node_to_regmap(node);
+ of_node_put(node);
+
+ if (IS_ERR(sysc_base)) {
+ ret = PTR_ERR(sysc_base);
+ if (ret != -EPROBE_DEFER)
+ dev_err(host->dev, "Can't get syscon: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ return 0;
+ }
+
+ priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->sysc_base = sysc_base;
+ host->priv = priv;
+
+ return 0;
+}
+
+static unsigned long zx_dwmmc_caps[3] = {
+ MMC_CAP_CMD23,
+ MMC_CAP_CMD23,
+ MMC_CAP_CMD23,
+};
+
+static const struct dw_mci_drv_data zx_drv_data = {
+ .caps = zx_dwmmc_caps,
+ .execute_tuning = dw_mci_zx_execute_tuning,
+ .prepare_hs400_tuning = dw_mci_zx_prepare_hs400_tuning,
+ .parse_dt = dw_mci_zx_parse_dt,
+};
+
+static const struct of_device_id dw_mci_zx_match[] = {
+ { .compatible = "zte,zx296718-dw-mshc", .data = &zx_drv_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_zx_match);
+
+static int dw_mci_zx_probe(struct platform_device *pdev)
+{
+ const struct dw_mci_drv_data *drv_data;
+ const struct of_device_id *match;
+
+ match = of_match_node(dw_mci_zx_match, pdev->dev.of_node);
+ drv_data = match->data;
+
+ return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+static const struct dev_pm_ops dw_mci_zx_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
+ dw_mci_runtime_resume,
+ NULL)
+};
+
+static struct platform_driver dw_mci_zx_pltfm_driver = {
+ .probe = dw_mci_zx_probe,
+ .remove = dw_mci_pltfm_remove,
+ .driver = {
+ .name = "dwmmc_zx",
+ .of_match_table = dw_mci_zx_match,
+ .pm = &dw_mci_zx_dev_pm_ops,
+ },
+};
+
+module_platform_driver(dw_mci_zx_pltfm_driver);
+
+MODULE_DESCRIPTION("ZTE emmc/sd driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,31 @@
+#ifndef _DW_MMC_ZX_H_
+#define _DW_MMC_ZX_H_
+
+/* ZX296718 SoC specific DLL register offset. */
+#define LB_AON_EMMC_CFG_REG0 0x1B0
+#define LB_AON_EMMC_CFG_REG1 0x1B4
+#define LB_AON_EMMC_CFG_REG2 0x1B8
+
+/* LB_AON_EMMC_CFG_REG0 register defines */
+#define PARA_DLL_START(x) ((x) & 0xFF)
+#define PARA_DLL_START_MASK 0xFF
+#define DLL_REG_SET BIT(8)
+#define PARA_DLL_LOCK_NUM(x) (((x) & 7) << 16)
+#define PARA_DLL_LOCK_NUM_MASK (7 << 16)
+#define PARA_PHASE_DET_SEL(x) (((x) & 7) << 20)
+#define PARA_PHASE_DET_SEL_MASK (7 << 20)
+#define PARA_DLL_BYPASS_MODE BIT(23)
+#define PARA_HALF_CLK_MODE BIT(24)
+
+/* LB_AON_EMMC_CFG_REG1 register defines */
+#define READ_DQS_DELAY(x) ((x) & 0x7F)
+#define READ_DQS_DELAY_MASK (0x7F)
+#define READ_DQS_BYPASS_MODE BIT(7)
+#define CLK_SAMP_DELAY(x) (((x) & 0x7F) << 8)
+#define CLK_SAMP_DELAY_MASK (0x7F << 8)
+#define CLK_SAMP_BYPASS_MODE BIT(15)
+
+/* LB_AON_EMMC_CFG_REG2 register defines */
+#define ZX_DLL_LOCKED BIT(2)
+
+#endif /* _DW_MMC_ZX_H_ */
This platform driver adds initial support for the DW host controller found on ZTE SoCs. It has been tested on ZX296718 EVB board currently. More support on timing tuning will be added when hardware is available. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/mmc/host/Kconfig | 9 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc-zx.c | 242 +++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc-zx.h | 31 ++++++ 4 files changed, 283 insertions(+) create mode 100644 drivers/mmc/host/dw_mmc-zx.c create mode 100644 drivers/mmc/host/dw_mmc-zx.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html