diff mbox

serial: 8250: use initializer instead of memset to clear local struct

Message ID 1482463308-28968-1-git-send-email-yamada.masahiro@socionext.com
State New
Headers show

Commit Message

Masahiro Yamada Dec. 23, 2016, 3:21 a.m. UTC 
Leave the way of zero-out to the compiler's decision; the compiler
may know a more optimized way than calling memset().

It may end up with memset() for big structures like this after all,
but the code will be cleaner at least.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 drivers/tty/serial/8250/8250_acorn.c    |  3 +--
 drivers/tty/serial/8250/8250_core.c     |  4 +---
 drivers/tty/serial/8250/8250_em.c       |  3 +--
 drivers/tty/serial/8250/8250_gsc.c      |  3 +--
 drivers/tty/serial/8250/8250_hp300.c    | 11 +++--------
 drivers/tty/serial/8250/8250_lpc18xx.c  |  4 +---
 drivers/tty/serial/8250/8250_lpss.c     |  4 +---
 drivers/tty/serial/8250/8250_mid.c      |  4 +---
 drivers/tty/serial/8250/8250_moxa.c     |  4 +---
 drivers/tty/serial/8250/8250_of.c       |  4 ++--
 drivers/tty/serial/8250/8250_omap.c     |  3 +--
 drivers/tty/serial/8250/8250_pci.c      |  3 +--
 drivers/tty/serial/8250/8250_pnp.c      |  3 +--
 drivers/tty/serial/8250/8250_uniphier.c |  4 +---
 drivers/tty/serial/8250/serial_cs.c     |  3 +--
 15 files changed, 18 insertions(+), 42 deletions(-)

-- 
2.7.4

Comments

Greg Kroah-Hartman Dec. 23, 2016, 7:20 a.m. UTC | #1 
On Fri, Dec 23, 2016 at 12:21:48PM +0900, Masahiro Yamada wrote:
> Leave the way of zero-out to the compiler's decision; the compiler

> may know a more optimized way than calling memset().


But no, it doesn't, it will leave "blank" areas in the structure with
bad data in it, which is why we do memset.  See the tree-wide fixups we
made about a year ago for this very issue.  Are you sure none of these
structures get copied to userspace?

> It may end up with memset() for big structures like this after all,

> but the code will be cleaner at least.


Please leave it as-is, unless you see a measured speedup.

thanks,

greg k-h
diff mbox

Patch

diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 402dfdd..f49acafc 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -43,7 +43,7 @@  serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	struct serial_card_info *info;
 	struct serial_card_type *type = id->data;
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	unsigned long bus_addr;
 	unsigned int i;
 
@@ -62,7 +62,6 @@  serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	ecard_set_drvdata(ec, info);
 
-	memset(&uart, 0, sizeof(struct uart_8250_port));
 	uart.port.irq	= ec->irq;
 	uart.port.flags	= UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
 	uart.port.uartclk	= type->uartclk;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61569a7..27c18c9 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -804,11 +804,9 @@  EXPORT_SYMBOL(serial8250_resume_port);
 static int serial8250_probe(struct platform_device *dev)
 {
 	struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	int ret, i, irqflag = 0;
 
-	memset(&uart, 0, sizeof(uart));
-
 	if (share_irqs)
 		irqflag = IRQF_SHARED;
 
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 0b63812..5deabaf 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -92,7 +92,7 @@  static int serial8250_em_probe(struct platform_device *pdev)
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	struct serial8250_em_priv *priv;
-	struct uart_8250_port up;
+	struct uart_8250_port up = {};
 	int ret;
 
 	if (!regs || !irq) {
@@ -110,7 +110,6 @@  static int serial8250_em_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->sclk);
 	}
 
-	memset(&up, 0, sizeof(up));
 	up.port.mapbase = regs->start;
 	up.port.irq = irq->start;
 	up.port.type = PORT_UNKNOWN;
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index b1e6ae9..5366e97 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@ 
 
 static int __init serial_init_chip(struct parisc_device *dev)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	unsigned long address;
 	int err;
 
@@ -53,7 +53,6 @@  static int __init serial_init_chip(struct parisc_device *dev)
 	if (dev->id.sversion != 0x8d)
 		address += 0x800;
 
-	memset(&uart, 0, sizeof(uart));
 	uart.port.iotype	= UPIO_MEM;
 	/* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
 	uart.port.uartclk	= (dev->id.sversion != 0xad) ?
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 38166db..6fd6414 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -90,9 +90,7 @@  extern int hp300_uart_scode;
 int __init hp300_setup_serial_console(void)
 {
 	int scode;
-	struct uart_port port;
-
-	memset(&port, 0, sizeof(port));
+	struct uart_port port = {};
 
 	if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
 		return 0;
@@ -156,7 +154,7 @@  int __init hp300_setup_serial_console(void)
 static int hpdca_init_one(struct dio_dev *d,
 				const struct dio_device_id *ent)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	int line;
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -165,7 +163,6 @@  static int hpdca_init_one(struct dio_dev *d,
 		return 0;
 	}
 #endif
-	memset(&uart, 0, sizeof(uart));
 
 	/* Memory mapped I/O */
 	uart.port.iotype = UPIO_MEM;
@@ -205,7 +202,7 @@  static int __init hp300_8250_init(void)
 #ifdef CONFIG_HPAPCI
 	int line;
 	unsigned long base;
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct hp300_port *port;
 	int i;
 #endif
@@ -243,8 +240,6 @@  static int __init hp300_8250_init(void)
 		if (!port)
 			return -ENOMEM;
 
-		memset(&uart, 0, sizeof(uart));
-
 		base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
 
 		/* Memory mapped I/O */
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 99cd478..e00115b 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -105,7 +105,7 @@  static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
 static int lpc18xx_serial_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_uart_data *data;
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct resource *res;
 	int irq, ret;
 
@@ -121,8 +121,6 @@  static int lpc18xx_serial_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	memset(&uart, 0, sizeof(uart));
-
 	uart.port.membase = devm_ioremap(&pdev->dev, res->start,
 					 resource_size(res));
 	if (!uart.port.membase)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 58cbb30..cba46dd 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -275,7 +275,7 @@  static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 
 static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct lpss8250 *lpss;
 	int ret;
 
@@ -289,8 +289,6 @@  static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	lpss->board = (struct lpss8250_board *)id->driver_data;
 
-	memset(&uart, 0, sizeof(struct uart_8250_port));
-
 	uart.port.dev = &pdev->dev;
 	uart.port.irq = pdev->irq;
 	uart.port.private_data = lpss;
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index ac013edf..8dd68c9 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -241,7 +241,7 @@  static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port)
 
 static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct mid8250 *mid;
 	unsigned int bar;
 	int ret;
@@ -259,8 +259,6 @@  static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	mid->board = (struct mid8250_board *)id->driver_data;
 	bar = FL_GET_BASE(mid->board->flags);
 
-	memset(&uart, 0, sizeof(struct uart_8250_port));
-
 	uart.port.dev = &pdev->dev;
 	uart.port.irq = pdev->irq;
 	uart.port.private_data = mid;
diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
index 26eb539..fe5179b 100644
--- a/drivers/tty/serial/8250/8250_moxa.c
+++ b/drivers/tty/serial/8250/8250_moxa.c
@@ -49,7 +49,7 @@  static struct moxa8250_board moxa8250_boards[] = {
 
 static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct moxa8250_board *brd;
 	void __iomem *ioaddr;
 	resource_size_t baseaddr;
@@ -69,8 +69,6 @@  static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!brd)
 		return -ENOMEM;
 
-	memset(&uart, 0, sizeof(struct uart_8250_port));
-
 	uart.port.dev = &pdev->dev;
 	uart.port.irq = pdev->irq;
 	uart.port.uartclk = MOXA_BASE_BAUD * 16;
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index d25ab1c..1fae126 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -196,8 +196,8 @@  static int of_platform_serial_probe(struct platform_device *ofdev)
 	case PORT_8250 ... PORT_MAX_8250:
 	{
 		u32 tx_threshold;
-		struct uart_8250_port port8250;
-		memset(&port8250, 0, sizeof(port8250));
+		struct uart_8250_port port8250 = {};
+
 		port8250.port = port;
 
 		if (port.fifosize)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 61ad6c3..ac88bf9 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1093,7 +1093,7 @@  static int omap8250_probe(struct platform_device *pdev)
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	struct omap8250_priv *priv;
-	struct uart_8250_port up;
+	struct uart_8250_port up = {};
 	int ret;
 	void __iomem *membase;
 
@@ -1111,7 +1111,6 @@  static int omap8250_probe(struct platform_device *pdev)
 	if (!membase)
 		return -ENODEV;
 
-	memset(&up, 0, sizeof(up));
 	up.port.dev = &pdev->dev;
 	up.port.mapbase = regs->start;
 	up.port.membase = membase;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa0166b..5e45704 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3834,7 +3834,7 @@  serial_pci_matches(const struct pciserial_board *board,
 struct serial_private *
 pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	struct serial_private *priv;
 	struct pci_serial_quirk *quirk;
 	int rc, nr_ports, i;
@@ -3874,7 +3874,6 @@  pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 	priv->dev = dev;
 	priv->quirk = quirk;
 
-	memset(&uart, 0, sizeof(uart));
 	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
 	uart.port.uartclk = board->base_baud * 16;
 	uart.port.irq = get_pci_irq(dev, board);
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 34f05ed..0891a6f 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -439,7 +439,7 @@  static int serial_pnp_guess_board(struct pnp_dev *dev)
 static int
 serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
-	struct uart_8250_port uart, *port;
+	struct uart_8250_port uart = {}, *port;
 	int ret, line, flags = dev_id->driver_data;
 
 	if (flags & UNKNOWN_DEV) {
@@ -448,7 +448,6 @@  serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 			return ret;
 	}
 
-	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
 	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 746680e..d7cfdfd 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -196,7 +196,7 @@  static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
 static int uniphier_uart_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct uart_8250_port up;
+	struct uart_8250_port up = {};
 	struct uniphier8250_priv *priv;
 	struct resource *regs;
 	void __iomem *membase;
@@ -223,8 +223,6 @@  static int uniphier_uart_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	memset(&up, 0, sizeof(up));
-
 	ret = uniphier_of_serial_setup(dev, &up.port, priv);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 933c268..348f897 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -342,10 +342,9 @@  static void serial_detach(struct pcmcia_device *link)
 static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
 			unsigned int iobase, int irq)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart = {};
 	int line;
 
-	memset(&uart, 0, sizeof(uart));
 	uart.port.iobase = iobase;
 	uart.port.irq = irq;
 	uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;