diff mbox

[v2,4/5] ARM: dts: keystone-k2l: Add PSC reset controller node

Message ID 20170112014843.19569-5-s-anna@ti.com
State Accepted
Commit 2ae4dad3523be2779a5844348c8bf84d1c9c1584
Headers show

Commit Message

Suman Anna Jan. 12, 2017, 1:48 a.m. UTC 
The Power Sleep Controller (PSC) module contains specific
memory-mapped registers that can be used to perform reset
management using specific bits for the DSPs available on the
SoC. The PSC is defined using a syscon node, and the reset
functionality is defined using a child syscon reset controller
node.

Add this syscon reset controller node as well as the reset
control data for the resets it supports for the 66AK2L SoCs.

Signed-off-by: Andrew F. Davis <afd@ti.com>

Signed-off-by: Suman Anna <s-anna@ti.com>

---
v2: change reset node name from psc-reset-controller to reset-controller

 arch/arm/boot/dts/keystone-k2l.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

-- 
2.10.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index b58015737a35..15392d32c572 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -8,6 +8,8 @@ 
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/reset/ti-syscon.h>
+
 / {
 	compatible = "ti,k2l", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Lamarr SoC";
@@ -216,6 +218,20 @@ 
 			};
 		};
 
+		psc: power-sleep-controller@02350000 {
+			pscrst: reset-controller {
+				compatible = "ti,k2l-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+				>;
+			};
+		};
+
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
 			gpio-controller;