diff mbox series

[09/22] mtd: add DT bindings for the Cortina Systems Gemini Flash

Message ID 20170122122119.10510-1-linus.walleij@linaro.org
State Accepted
Commit 22f090a4b15bf08aab30d8bcdc93d6dc9d07c9a7
Headers show
Series None | expand

Commit Message

Linus Walleij Jan. 22, 2017, 12:21 p.m. UTC 
This adds device tree bindings for the Cortina systems Gemini
flash controller, a simple physmap which however need a few
syscon bits to be poked to operate properly.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
MTD maintainers: please just apply this to the MTD tree when
you are happy with it. It is functionally orthogonal to the rest
of the series and is just in the series for context.
---
 .../bindings/mtd/cortina,gemini-flash.txt          | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt

-- 
2.9.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
new file mode 100644
index 000000000000..3fa1b34d69ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
@@ -0,0 +1,24 @@ 
+Flash device on Cortina Systems Gemini SoC
+
+This flash is regular CFI compatible (Intel or AMD extended) flash chips with
+some special bits that can be controlled by the machine's system controller.
+
+Required properties:
+- compatible : must be "cortina,gemini-flash", "cfi-flash";
+- reg : memory address for the flash chip
+- syscon : must be a phandle to the system controller
+- bank-width : width in bytes of flash interface, should be <2>
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+flash@30000000 {
+	compatible = "cortina,gemini-flash", "cfi-flash";
+	reg = <0x30000000 0x01000000>;
+	syscon = <&syscon>;
+	bank-width = <2>;
+};