diff mbox series

[1/6] usb: musb: dma: Add a DMA completion platform callback

Message ID 1486443236-7355-2-git-send-email-b-liu@ti.com
State New
Headers show
Series [1/6] usb: musb: dma: Add a DMA completion platform callback | expand

Commit Message

Bin Liu Feb. 7, 2017, 4:53 a.m. UTC
From: Alexandre Bailon <abailon@baylibre.com>


Currently, the CPPI 4.1 driver is not completely generic and
only works on DSPS. This is because of IRQ management.
Add a callback to dma_controller that could be invoked on DMA completion
to acknowledge the IRQ.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>

Signed-off-by: Bin Liu <b-liu@ti.com>

---
 drivers/usb/musb/musb_cppi41.c | 7 +++++--
 drivers/usb/musb/musb_dma.h    | 5 +++++
 2 files changed, 10 insertions(+), 2 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 16363852c034..f7d3d27fd2c1 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -217,6 +217,10 @@  static void cppi41_dma_callback(void *private_data)
 	int is_hs = 0;
 	bool empty;
 
+	controller = cppi41_channel->controller;
+	if (controller->controller.dma_callback)
+		controller->controller.dma_callback(&controller->controller);
+
 	spin_lock_irqsave(&musb->lock, flags);
 
 	dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
@@ -249,8 +253,6 @@  static void cppi41_dma_callback(void *private_data)
 	 * We spin on HS (no longer than than 25us and setup a timer on
 	 * FS to check for the bit and complete the transfer.
 	 */
-	controller = cppi41_channel->controller;
-
 	if (is_host_active(musb)) {
 		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
 			is_hs = 1;
@@ -695,6 +697,7 @@  struct dma_controller *
 	controller->controller.channel_program = cppi41_dma_channel_program;
 	controller->controller.channel_abort = cppi41_dma_channel_abort;
 	controller->controller.is_compatible = cppi41_is_compatible;
+	controller->controller.musb = musb;
 
 	ret = cppi41_dma_controller_start(controller);
 	if (ret)
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 46357e183b4c..04c3bd86bd62 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -173,6 +173,7 @@  struct dma_channel {
 
 /**
  * struct dma_controller - A DMA Controller.
+ * @musb: the usb controller
  * @start: call this to start a DMA controller;
  *	return 0 on success, else negative errno
  * @stop: call this to stop a DMA controller
@@ -181,10 +182,13 @@  struct dma_channel {
  * @channel_release: call this to release a DMA channel
  * @channel_abort: call this to abort a pending DMA transaction,
  *	returning it to FREE (but allocated) state
+ * @dma_callback: invoked on DMA completion, useful to run platform
+ *	code such IRQ acknowledgment.
  *
  * Controllers manage dma channels.
  */
 struct dma_controller {
+	struct musb *musb;
 	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
 					struct musb_hw_ep *, u8 is_tx);
 	void			(*channel_release)(struct dma_channel *);
@@ -196,6 +200,7 @@  struct dma_controller {
 	int			(*is_compatible)(struct dma_channel *channel,
 							u16 maxpacket,
 							void *buf, u32 length);
+	void			(*dma_callback)(struct dma_controller *);
 };
 
 /* called after channel_program(), may indicate a fault */