diff mbox series

[v4,2/3] ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family

Message ID 1486609978-18482-2-git-send-email-baoyou.xie@linaro.org
State Accepted
Commit b5f18ba89391da7a92605dc76822580d13e2ef74
Headers show
Series None | expand

Commit Message

Baoyou Xie Feb. 9, 2017, 3:12 a.m. UTC
ZTE's zx2967 I2S controller driver introduces pclk, this
patch documents this fact.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>

---
 Documentation/devicetree/bindings/sound/zte,zx-i2s.txt | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

-- 
2.7.4

Comments

Shawn Guo Feb. 13, 2017, 1:05 p.m. UTC | #1
On Thu, Feb 09, 2017 at 04:46:45PM +0000, Mark Brown wrote:
> On Thu, Feb 09, 2017 at 11:12:57AM +0800, Baoyou Xie wrote:

> 

> > - - compatible : Must be "zte,zx296702-i2s"

> > + - compatible : Must be one of:

> > +	"zte,zx296718-i2s", "zte,zx296702-i2s"

> > +	"zte,zx296702-i2s"

> 

> You've added the new compatible twice here?


It's indeed a bit confusing.  Might be better if we add a couple of
bullet like below.

 - compatible : Must be one of:
	- "zte,zx296718-i2s", "zte,zx296702-i2s";
	- "zte,zx296702-i2s";

In this case, it's more easier for readers to understand that the first
one is for I2S device on SoC ZX296718, while it's compatible with the
I2S on ZX296702.

Shawn
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f..292ad50 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -1,10 +1,12 @@ 
 ZTE ZX296702 I2S controller
 
 Required properties:
- - compatible : Must be "zte,zx296702-i2s"
+ - compatible : Must be one of:
+	"zte,zx296718-i2s", "zte,zx296702-i2s"
+	"zte,zx296702-i2s"
  - reg : Must contain I2S core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the I2S interface.
+ - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
  - dmas: Pairs of phandle and specifier for the DMA channel that is used by
    the core. The core expects two dma channels for transmit.
  - dma-names : Must be "tx" and "rx"
@@ -16,12 +18,12 @@  please check:
 	* dma/dma.txt
 
 Example:
-	i2s0: i2s0@0b005000 {
+	i2s0: i2s@b005000 {
 		#sound-dai-cells = <0>;
-		compatible = "zte,zx296702-i2s";
+		compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
 		reg = <0x0b005000 0x1000>;
-		clocks = <&lsp0clk ZX296702_I2S0_DIV>;
-		clock-names = "tx";
+		clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>;
+		clock-names = "wclk", "pclk";
 		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&dma 5>, <&dma 6>;
 		dma-names = "tx", "rx";