| Message ID | 1487170499-22374-4-git-send-email-haojian.zhuang@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | add drivers for Android Fastboot App on HiKey | expand |
On Wed, Feb 15, 2017 at 10:54:57PM +0800, Haojian Zhuang wrote: > Enable all PL061 GPIO controllers on HiKey platform. Without this, > only one PL061 GPIO controller could be supported on HiKey platform. > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > --- > .../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 96 ++++++++++++++++++++++ > .../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 38 +++++++++ > 2 files changed, 134 insertions(+) > create mode 100644 Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c > create mode 100644 Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf > > diff --git a/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c > new file mode 100644 > index 0000000..4a2943c > --- /dev/null > +++ b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c > @@ -0,0 +1,96 @@ > +/** @file > +* > +* Copyright (c) 2015-2017, Linaro. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#include <Drivers/PL061Gpio.h> > + > +#include <Library/UefiBootServicesTableLib.h> > + > +#include <Protocol/EmbeddedGpio.h> > + > +#include <Hi6220.h> > + > +#define GPIO0_CTRL_PIN_BASE (0 * PL061_GPIO_PINS) > +#define GPIO1_CTRL_PIN_BASE (1 * PL061_GPIO_PINS) > +#define GPIO2_CTRL_PIN_BASE (2 * PL061_GPIO_PINS) > +#define GPIO3_CTRL_PIN_BASE (3 * PL061_GPIO_PINS) > +#define GPIO4_CTRL_PIN_BASE (4 * PL061_GPIO_PINS) > +#define GPIO5_CTRL_PIN_BASE (5 * PL061_GPIO_PINS) > +#define GPIO6_CTRL_PIN_BASE (6 * PL061_GPIO_PINS) > +#define GPIO7_CTRL_PIN_BASE (7 * PL061_GPIO_PINS) > +#define GPIO8_CTRL_PIN_BASE (8 * PL061_GPIO_PINS) > +#define GPIO9_CTRL_PIN_BASE (9 * PL061_GPIO_PINS) > +#define GPIO10_CTRL_PIN_BASE (10 * PL061_GPIO_PINS) > +#define GPIO11_CTRL_PIN_BASE (11 * PL061_GPIO_PINS) > +#define GPIO12_CTRL_PIN_BASE (12 * PL061_GPIO_PINS) > +#define GPIO13_CTRL_PIN_BASE (13 * PL061_GPIO_PINS) > +#define GPIO14_CTRL_PIN_BASE (14 * PL061_GPIO_PINS) > +#define GPIO15_CTRL_PIN_BASE (15 * PL061_GPIO_PINS) > +#define GPIO16_CTRL_PIN_BASE (16 * PL061_GPIO_PINS) > +#define GPIO17_CTRL_PIN_BASE (17 * PL061_GPIO_PINS) > +#define GPIO18_CTRL_PIN_BASE (18 * PL061_GPIO_PINS) > +#define GPIO19_CTRL_PIN_BASE (19 * PL061_GPIO_PINS) > + > +#define GPIO_CTRL_NUMS 20 > +#define GPIO_PIN_NUMS (GPIO_CTRL_NUMS * PL061_GPIO_PINS) > + > +GPIO_CONTROLLER gGpioDevice[]= { > + { GPIO0_CTRL_BASE, GPIO0_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO1_CTRL_BASE, GPIO1_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO2_CTRL_BASE, GPIO2_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO3_CTRL_BASE, GPIO3_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO4_CTRL_BASE, GPIO4_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO5_CTRL_BASE, GPIO5_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO6_CTRL_BASE, GPIO6_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO7_CTRL_BASE, GPIO7_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO8_CTRL_BASE, GPIO8_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO9_CTRL_BASE, GPIO9_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO10_CTRL_BASE, GPIO10_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO11_CTRL_BASE, GPIO11_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO12_CTRL_BASE, GPIO12_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO13_CTRL_BASE, GPIO13_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO14_CTRL_BASE, GPIO14_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO15_CTRL_BASE, GPIO15_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO16_CTRL_BASE, GPIO16_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO17_CTRL_BASE, GPIO17_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO18_CTRL_BASE, GPIO18_CTRL_PIN_BASE, PL061_GPIO_PINS }, > + { GPIO19_CTRL_BASE, GPIO19_CTRL_PIN_BASE, PL061_GPIO_PINS }, > +}; > + > +PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = { > + GPIO_PIN_NUMS, GPIO_CTRL_NUMS, gGpioDevice > +}; > + > +EFI_STATUS > +EFIAPI > +HiKeyGpioEntryPoint ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + EFI_HANDLE Handle; > + > + // Install the Embedded Platform GPIO Protocol onto a new handle > + Handle = NULL; > + Status = gBS->InstallMultipleProtocolInterfaces ( > + &Handle, > + &gPlatformGpioProtocolGuid, &gPlatformGpioDevice, > + NULL > + ); > + if (EFI_ERROR (Status)) { > + Status = EFI_OUT_OF_RESOURCES; > + } > + > + return Status; > +} > diff --git a/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf > new file mode 100644 > index 0000000..d69c6f4 > --- /dev/null > +++ b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf > @@ -0,0 +1,38 @@ > +# > +# Copyright (c) 2015-2017, Linaro. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > + > +[Defines] > + INF_VERSION = 0x00010019 > + BASE_NAME = HiKeyGpio > + FILE_GUID = b51a851c-7bf7-463f-b261-cfb158b7f699 > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + ENTRY_POINT = HiKeyGpioEntryPoint > + > +[Sources.common] > + HiKeyGpioDxe.c > + > +[Packages] > + ArmPlatformPkg/ArmPlatformPkg.dec > + EmbeddedPkg/EmbeddedPkg.dec > + MdePkg/MdePkg.dec > + OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKey.dec > + > +[LibraryClasses] > + DebugLib > + UefiDriverEntryPoint > + > +[Protocols] > + gPlatformGpioProtocolGuid > + > +[Depex] > + TRUE > -- > 2.7.4 >
diff --git a/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c new file mode 100644 index 0000000..4a2943c --- /dev/null +++ b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c @@ -0,0 +1,96 @@ +/** @file +* +* Copyright (c) 2015-2017, Linaro. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Drivers/PL061Gpio.h> + +#include <Library/UefiBootServicesTableLib.h> + +#include <Protocol/EmbeddedGpio.h> + +#include <Hi6220.h> + +#define GPIO0_CTRL_PIN_BASE (0 * PL061_GPIO_PINS) +#define GPIO1_CTRL_PIN_BASE (1 * PL061_GPIO_PINS) +#define GPIO2_CTRL_PIN_BASE (2 * PL061_GPIO_PINS) +#define GPIO3_CTRL_PIN_BASE (3 * PL061_GPIO_PINS) +#define GPIO4_CTRL_PIN_BASE (4 * PL061_GPIO_PINS) +#define GPIO5_CTRL_PIN_BASE (5 * PL061_GPIO_PINS) +#define GPIO6_CTRL_PIN_BASE (6 * PL061_GPIO_PINS) +#define GPIO7_CTRL_PIN_BASE (7 * PL061_GPIO_PINS) +#define GPIO8_CTRL_PIN_BASE (8 * PL061_GPIO_PINS) +#define GPIO9_CTRL_PIN_BASE (9 * PL061_GPIO_PINS) +#define GPIO10_CTRL_PIN_BASE (10 * PL061_GPIO_PINS) +#define GPIO11_CTRL_PIN_BASE (11 * PL061_GPIO_PINS) +#define GPIO12_CTRL_PIN_BASE (12 * PL061_GPIO_PINS) +#define GPIO13_CTRL_PIN_BASE (13 * PL061_GPIO_PINS) +#define GPIO14_CTRL_PIN_BASE (14 * PL061_GPIO_PINS) +#define GPIO15_CTRL_PIN_BASE (15 * PL061_GPIO_PINS) +#define GPIO16_CTRL_PIN_BASE (16 * PL061_GPIO_PINS) +#define GPIO17_CTRL_PIN_BASE (17 * PL061_GPIO_PINS) +#define GPIO18_CTRL_PIN_BASE (18 * PL061_GPIO_PINS) +#define GPIO19_CTRL_PIN_BASE (19 * PL061_GPIO_PINS) + +#define GPIO_CTRL_NUMS 20 +#define GPIO_PIN_NUMS (GPIO_CTRL_NUMS * PL061_GPIO_PINS) + +GPIO_CONTROLLER gGpioDevice[]= { + { GPIO0_CTRL_BASE, GPIO0_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO1_CTRL_BASE, GPIO1_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO2_CTRL_BASE, GPIO2_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO3_CTRL_BASE, GPIO3_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO4_CTRL_BASE, GPIO4_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO5_CTRL_BASE, GPIO5_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO6_CTRL_BASE, GPIO6_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO7_CTRL_BASE, GPIO7_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO8_CTRL_BASE, GPIO8_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO9_CTRL_BASE, GPIO9_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO10_CTRL_BASE, GPIO10_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO11_CTRL_BASE, GPIO11_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO12_CTRL_BASE, GPIO12_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO13_CTRL_BASE, GPIO13_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO14_CTRL_BASE, GPIO14_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO15_CTRL_BASE, GPIO15_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO16_CTRL_BASE, GPIO16_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO17_CTRL_BASE, GPIO17_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO18_CTRL_BASE, GPIO18_CTRL_PIN_BASE, PL061_GPIO_PINS }, + { GPIO19_CTRL_BASE, GPIO19_CTRL_PIN_BASE, PL061_GPIO_PINS }, +}; + +PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = { + GPIO_PIN_NUMS, GPIO_CTRL_NUMS, gGpioDevice +}; + +EFI_STATUS +EFIAPI +HiKeyGpioEntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + EFI_HANDLE Handle; + + // Install the Embedded Platform GPIO Protocol onto a new handle + Handle = NULL; + Status = gBS->InstallMultipleProtocolInterfaces ( + &Handle, + &gPlatformGpioProtocolGuid, &gPlatformGpioDevice, + NULL + ); + if (EFI_ERROR (Status)) { + Status = EFI_OUT_OF_RESOURCES; + } + + return Status; +} diff --git a/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf new file mode 100644 index 0000000..d69c6f4 --- /dev/null +++ b/Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf @@ -0,0 +1,38 @@ +# +# Copyright (c) 2015-2017, Linaro. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +[Defines] + INF_VERSION = 0x00010019 + BASE_NAME = HiKeyGpio + FILE_GUID = b51a851c-7bf7-463f-b261-cfb158b7f699 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = HiKeyGpioEntryPoint + +[Sources.common] + HiKeyGpioDxe.c + +[Packages] + ArmPlatformPkg/ArmPlatformPkg.dec + EmbeddedPkg/EmbeddedPkg.dec + MdePkg/MdePkg.dec + OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKey.dec + +[LibraryClasses] + DebugLib + UefiDriverEntryPoint + +[Protocols] + gPlatformGpioProtocolGuid + +[Depex] + TRUE
Enable all PL061 GPIO controllers on HiKey platform. Without this, only one PL061 GPIO controller could be supported on HiKey platform. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- .../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 96 ++++++++++++++++++++++ .../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 38 +++++++++ 2 files changed, 134 insertions(+) create mode 100644 Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c create mode 100644 Platforms/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf