diff mbox series

[v2,04/22] Documentation: PCI: Guide to use pci endpoint configfs

Message ID 1487325042-28227-5-git-send-email-kishon@ti.com
State New
Headers show
Series [v2,01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions | expand

Commit Message

Kishon Vijay Abraham I Feb. 17, 2017, 9:50 a.m. UTC
Add Documentation to help users use pci endpoint to configure
pci endpoint function and to bind the endpoint function
with endpoint controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 Documentation/PCI/00-INDEX                      |    2 +
 Documentation/PCI/endpoint/pci-endpoint-cfs.txt |   84 +++++++++++++++++++++++
 2 files changed, 86 insertions(+)
 create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt

-- 
1.7.9.5
diff mbox series

Patch

diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index ba950b2..f84a23c 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -14,3 +14,5 @@  pcieaer-howto.txt
 	- the PCI Express Advanced Error Reporting Driver Guide HOWTO
 endpoint/pci-endpoint.txt
 	- guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+	- guide to use configfs to configure the pci endpoint function.
diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.txt b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
new file mode 100644
index 0000000..d9f8734
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
@@ -0,0 +1,84 @@ 
+                   CONFIGURING PCI ENDPOINT USING CONFIGFS
+                    Kishon Vijay Abraham I <kishon@ti.com>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) in order to configure the
+PCI endpoint function and in order to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+	mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs directory structure has been created to reflect the
+natural tree like structure of PCI devices. So every directory created
+inside pci_ep represents a EPC device and every directory created inside
+epf directory represents EPF device.
+
+/sys/kernel/config/pci_ep/
+			 | <dir>/ --------------------------------------> [2]
+				| epc
+				| epf/
+				     | <dir>/ --------------------------> [3]
+					    | vendorid
+					    | deviceid
+					    | revid
+					    | progif_code
+					    | subclass_code
+					    | baseclass_code
+					    | cache_line_size
+					    | subsys_vendor_id
+					    | subsys_id
+					    | interrupt_pin
+					    | function
+
+*) Creating configfs entry for EPC
+
+Any directory created inside *pci_ep* represents an EPC device. In the above
+directory structure [2] represents an EPC device. It consists of
+
+	*) epc: Use it to associate the configfs entry to an actual EPC device.
+		The list of valid entries for this field can be obtained from
+			ls /sys/class/pci_epc/
+
+	*) epf: Directory that contains all the endpoint functions. The name
+		of the created directory determines the driver this particular
+		epf device will be bound to. The name can be obtained either
+		from the function binding documentation [4] or
+			ls /sys/bus/pci-epf/drivers
+
+		If more than one endpoint function device has to be bound to
+		the same driver, then the directory should be created using
+		the following notation
+			mkdir <name>.<num>
+
+*) Creating configfs entry for EPF
+
+Any directory created inside *epf* directory represents an EPF device. In the
+above directory structure, [3] represents an EPF device. It consists of the
+following entries that can be used to configure the standard configuration
+header of the endpoint function. (These entries are created by the
+framework when any new directory is created inside epf directory.)
+
+        | vendorid
+        | deviceid
+        | revid
+        | progif_code
+        | subclass_code
+        | baseclass_code
+        | cache_line_size
+        | subsys_vendor_id
+        | subsys_id
+        | interrupt_pin
+
+The following entry identifies the function driver that is bound to the
+function device
+	| function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt
+[4] -> Documentation/PCI/endpoint/function/binding/