diff mbox series

[PULL,24/30] armv7m: Allow SHCSR writes to change pending and active bits

Message ID 1488218699-31035-25-git-send-email-peter.maydell@linaro.org
State Accepted
Commit 5db53e353dfe08492aca793b4748d8182f9780b3
Headers show
Series target-arm queue | expand

Commit Message

Peter Maydell Feb. 27, 2017, 6:04 p.m. UTC 
Implement the NVIC SHCSR write behaviour which allows pending and
active status of some exceptions to be changed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

---
 hw/intc/armv7m_nvic.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 718b1a1..76097b4 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -755,8 +755,17 @@  static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value)
         cpu->env.v7m.ccr = value;
         break;
     case 0xd24: /* System Handler Control.  */
-        /* TODO: Real hardware allows you to set/clear the active bits
-           under some circumstances.  We don't implement this.  */
+        s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0;
+        s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0;
+        s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0;
+        s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0;
+        s->vectors[ARMV7M_EXCP_DEBUG].active = (value & (1 << 8)) != 0;
+        s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0;
+        s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0;
+        s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0;
+        s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0;
+        s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0;
+        s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0;
         s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0;
         s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0;
         s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0;