@@ -67,15 +67,16 @@ config DW_APB_TIMER_OF
select DW_APB_TIMER
select CLKSRC_OF
-config GEMINI_TIMER
- bool "Cortina Gemini timer driver" if COMPILE_TEST
+config FTTMR010_TIMER
+ bool "Faraday Technology timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
depends on HAS_IOMEM
select CLKSRC_MMIO
select CLKSRC_OF
select MFD_SYSCON
help
- Enables support for the Gemini timer
+ Enables support for the Faraday Technology timer block
+ FTTMR010.
config ROCKCHIP_TIMER
bool "Rockchip timer driver" if COMPILE_TEST
@@ -17,7 +17,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
-obj-$(CONFIG_GEMINI_TIMER) += timer-gemini.o
+obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
similarity index 83%
rename from drivers/clocksource/timer-gemini.c
rename to drivers/clocksource/timer-fttmr010.c
@@ -1,5 +1,5 @@
/*
- * Gemini timer driver
+ * Faraday Technology FTTMR010 timer driver
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*
* Based on a rewrite of arch/arm/mach-gemini/timer.c:
@@ -77,12 +77,12 @@
static unsigned int tick_rate;
static void __iomem *base;
-static u64 notrace gemini_read_sched_clock(void)
+static u64 notrace fttmr010_read_sched_clock(void)
{
return readl(base + TIMER3_COUNT);
}
-static int gemini_timer_set_next_event(unsigned long cycles,
+static int fttmr010_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
u32 cr;
@@ -96,7 +96,7 @@ static int gemini_timer_set_next_event(unsigned long cycles,
return 0;
}
-static int gemini_timer_shutdown(struct clock_event_device *evt)
+static int fttmr010_timer_shutdown(struct clock_event_device *evt)
{
u32 cr;
@@ -127,7 +127,7 @@ static int gemini_timer_shutdown(struct clock_event_device *evt)
return 0;
}
-static int gemini_timer_set_periodic(struct clock_event_device *evt)
+static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
{
u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
u32 cr;
@@ -158,35 +158,35 @@ static int gemini_timer_set_periodic(struct clock_event_device *evt)
}
/* Use TIMER1 as clock event */
-static struct clock_event_device gemini_clockevent = {
+static struct clock_event_device fttmr010_clockevent = {
.name = "TIMER1",
/* Reasonably fast and accurate clock event */
.rating = 300,
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = gemini_timer_set_next_event,
- .set_state_shutdown = gemini_timer_shutdown,
- .set_state_periodic = gemini_timer_set_periodic,
- .set_state_oneshot = gemini_timer_shutdown,
- .tick_resume = gemini_timer_shutdown,
+ .set_next_event = fttmr010_timer_set_next_event,
+ .set_state_shutdown = fttmr010_timer_shutdown,
+ .set_state_periodic = fttmr010_timer_set_periodic,
+ .set_state_oneshot = fttmr010_timer_shutdown,
+ .tick_resume = fttmr010_timer_shutdown,
};
/*
* IRQ handler for the timer
*/
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = &gemini_clockevent;
+ struct clock_event_device *evt = &fttmr010_clockevent;
evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction gemini_timer_irq = {
- .name = "Gemini Timer Tick",
+static struct irqaction fttmr010_timer_irq = {
+ .name = "Faraday FTTMR010 Timer Tick",
.flags = IRQF_TIMER,
- .handler = gemini_timer_interrupt,
+ .handler = fttmr010_timer_interrupt,
};
static int __init gemini_timer_of_init(struct device_node *np)
@@ -255,9 +255,9 @@ static int __init gemini_timer_of_init(struct device_node *np)
writel(0, base + TIMER3_MATCH1);
writel(0, base + TIMER3_MATCH2);
clocksource_mmio_init(base + TIMER3_COUNT,
- "gemini_clocksource", tick_rate,
+ "fttmr010_clocksource", tick_rate,
300, 32, clocksource_mmio_readl_up);
- sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
+ sched_clock_register(fttmr010_read_sched_clock, 32, tick_rate);
/*
* Setup clockevent timer (interrupt-driven.)
@@ -266,12 +266,11 @@ static int __init gemini_timer_of_init(struct device_node *np)
writel(0, base + TIMER1_LOAD);
writel(0, base + TIMER1_MATCH1);
writel(0, base + TIMER1_MATCH2);
- setup_irq(irq, &gemini_timer_irq);
- gemini_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&gemini_clockevent, tick_rate,
+ setup_irq(irq, &fttmr010_timer_irq);
+ fttmr010_clockevent.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&fttmr010_clockevent, tick_rate,
1, 0xffffffff);
return 0;
}
-CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer",
- gemini_timer_of_init);
+CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init);
After some research it turns out that the "Gemini" timer is actually a generic IP block from Faraday Technology named FTTMR010, so as to not make things too confusing we need to rename the driver and its symbols to make sense. The implementation remains the same in this patch but we fix the copy-paste error in the timer name "nomadik_mtu" as we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/clocksource/Kconfig | 7 ++-- drivers/clocksource/Makefile | 2 +- .../{timer-gemini.c => timer-fttmr010.c} | 45 +++++++++++----------- 3 files changed, 27 insertions(+), 27 deletions(-) rename drivers/clocksource/{timer-gemini.c => timer-fttmr010.c} (83%) -- 2.9.3