| Message ID | 20170327180905.32498-1-kumar.gala@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Mar 27, 2017 at 01:09:05PM -0500, Kumar Gala wrote: > Signed-off-by: Kumar Gala <kumar.gala@linaro.org> > --- > Note: This is a new binding and not used by the linux kernel code right now for > the nvic. The intent would be to support both the current 'arm,armv7m-nvic' > compatible and this binding in the code in the future. The 'arm,armv7m-nvic' > doesnt have any binding spec covering it today. > > .../bindings/interrupt-controller/arm,nvic.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt > new file mode 100644 > index 0000000..60ee89c > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt > @@ -0,0 +1,37 @@ > +* ARM Nested Vector Interrupt Controller (NVIC) > + > +The NVIC provides an interrupt controller that is tightly coupled to > +Cortex-M based processor cores. The NVIC implemented on different SoCs > +vary in the number of interrupts and priority bits per interrupt. > + > +Main node required properties: > + > +- compatible : should be one of: > + "arm,v6m-nvic" > + "arm,v7m-nvic" > + "arm,v8m-nvic" > + "arm,nvic" I'd drop this last one. > +- interrupt-controller : Identifies the node as an interrupt controller > +- #interrupt-cells : Specifies the number of cells needed to encode an > + interrupt source. The type shall be a <u32> and the value shall be 2. > + > + The 1st cell contains the interrupt number for the interrupt type. > + > + The 2nd cell is the priority of the interrupt. No level/edge flags needed? > + > +- reg : Specifies base physical address(s) and size of the NVIC registers. > + This is at a fixed address (0xe000e100) and size (0xc00). > + > +- arm,num-irq-priority-bits: The number of priority bits implemented by the > + given SoC > + > +Example: > + > + intc: interrupt-controller@e000e100 { > + compatible = "arm,nvic"; > + #interrupt-cells = <2>; > + #address-cells = <1>; > + interrupt-controller; > + reg = <0xe000e100 0xc00>; > + arm,num-irq-priority-bits = <4>; > + }; > -- > 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On Apr 3, 2017, at 8:32 AM, Rob Herring <robh@kernel.org> wrote: > > On Mon, Mar 27, 2017 at 01:09:05PM -0500, Kumar Gala wrote: >> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> >> --- >> Note: This is a new binding and not used by the linux kernel code right now for >> the nvic. The intent would be to support both the current 'arm,armv7m-nvic' >> compatible and this binding in the code in the future. The 'arm,armv7m-nvic' >> doesnt have any binding spec covering it today. >> >> .../bindings/interrupt-controller/arm,nvic.txt | 37 ++++++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt >> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt >> new file mode 100644 >> index 0000000..60ee89c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt >> @@ -0,0 +1,37 @@ >> +* ARM Nested Vector Interrupt Controller (NVIC) >> + >> +The NVIC provides an interrupt controller that is tightly coupled to >> +Cortex-M based processor cores. The NVIC implemented on different SoCs >> +vary in the number of interrupts and priority bits per interrupt. >> + >> +Main node required properties: >> + >> +- compatible : should be one of: >> + "arm,v6m-nvic" >> + "arm,v7m-nvic" >> + "arm,v8m-nvic" >> + "arm,nvic" > > I'd drop this last one. done > >> +- interrupt-controller : Identifies the node as an interrupt controller >> +- #interrupt-cells : Specifies the number of cells needed to encode an >> + interrupt source. The type shall be a <u32> and the value shall be 2. >> + >> + The 1st cell contains the interrupt number for the interrupt type. >> + >> + The 2nd cell is the priority of the interrupt. > > No level/edge flags needed? Nope, it seems to be implied in how the IRQs get wired up to the NVIC. > >> + >> +- reg : Specifies base physical address(s) and size of the NVIC registers. >> + This is at a fixed address (0xe000e100) and size (0xc00). >> + >> +- arm,num-irq-priority-bits: The number of priority bits implemented by the >> + given SoC >> + >> +Example: >> + >> + intc: interrupt-controller@e000e100 { >> + compatible = "arm,nvic"; >> + #interrupt-cells = <2>; >> + #address-cells = <1>; >> + interrupt-controller; >> + reg = <0xe000e100 0xc00>; >> + arm,num-irq-priority-bits = <4>; >> + }; >> -- >> 2.9.3 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt new file mode 100644 index 0000000..60ee89c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt @@ -0,0 +1,37 @@ +* ARM Nested Vector Interrupt Controller (NVIC) + +The NVIC provides an interrupt controller that is tightly coupled to +Cortex-M based processor cores. The NVIC implemented on different SoCs +vary in the number of interrupts and priority bits per interrupt. + +Main node required properties: + +- compatible : should be one of: + "arm,v6m-nvic" + "arm,v7m-nvic" + "arm,v8m-nvic" + "arm,nvic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a <u32> and the value shall be 2. + + The 1st cell contains the interrupt number for the interrupt type. + + The 2nd cell is the priority of the interrupt. + +- reg : Specifies base physical address(s) and size of the NVIC registers. + This is at a fixed address (0xe000e100) and size (0xc00). + +- arm,num-irq-priority-bits: The number of priority bits implemented by the + given SoC + +Example: + + intc: interrupt-controller@e000e100 { + compatible = "arm,nvic"; + #interrupt-cells = <2>; + #address-cells = <1>; + interrupt-controller; + reg = <0xe000e100 0xc00>; + arm,num-irq-priority-bits = <4>; + };
Signed-off-by: Kumar Gala <kumar.gala@linaro.org> --- Note: This is a new binding and not used by the linux kernel code right now for the nvic. The intent would be to support both the current 'arm,armv7m-nvic' compatible and this binding in the code in the future. The 'arm,armv7m-nvic' doesnt have any binding spec covering it today. .../bindings/interrupt-controller/arm,nvic.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html