diff mbox series

[v3,07/37] mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant

Message ID 1490856383-31560-8-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit a56609c4c3f34de76d905e39160511b3c53310ac
Headers show
Series [v3,01/37] mtd: nand: relax ecc.read_page() return value for uncorrectable ECC | expand

Commit Message

Masahiro Yamada March 30, 2017, 6:45 a.m. UTC 
There are various customizable parameters, so several variants for
this IP.  A generic compatible like "denali,denali-nand-dt" is
useless.  Moreover, there are multiple things wrong with this string.
(Refer to Rob's comment [1])

The "denali,denali-nand-dt" was added by Altera for the SOCFPGA port.
Replace it with a more specific string "altr,socfpga-denali-nand".
There are no users (in upstream) of the old compatible string.

The Denali IP on SOCFPGA incorporates the hardware ECC fixup engine.
So, this capability should be associated with the compatible.

[1] https://lkml.org/lkml/2016/12/1/450

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v3:
  - Update git-log to mention there are no users of the old binding.

Changes in v2:
  - Add caps flag to of_device_id data, not hard-code in driver code
  - Add Altera-specific compatible.

 Documentation/devicetree/bindings/mtd/denali-nand.txt |  5 +++--
 drivers/mtd/nand/denali_dt.c                          | 14 ++++++++++----
 2 files changed, 13 insertions(+), 6 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index b04d03a..6f4ab4c 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -1,7 +1,8 @@ 
 * Denali NAND controller
 
 Required properties:
-  - compatible : should be "denali,denali-nand-dt"
+  - compatible : should be one of the following:
+      "altr,socfpga-denali-nand"            - for Altera SOCFPGA
   - reg : should contain registers location and length for data and reg.
   - reg-names: Should contain the reg names "nand_data" and "denali_reg"
   - interrupts : The interrupt number.
@@ -15,7 +16,7 @@  Examples:
 nand: nand@ff900000 {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "denali,denali-nand-dt";
+	compatible = "altr,socfpga-denali-nand";
 	reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
 	reg-names = "nand_data", "denali_reg";
 	interrupts = <0 144 4>;
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index 293ddb8..9577bfd 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -33,11 +33,17 @@  struct denali_dt_data {
 	unsigned int caps;
 };
 
-static const struct of_device_id denali_nand_dt_ids[] = {
-		{ .compatible = "denali,denali-nand-dt" },
-		{ /* sentinel */ }
-	};
+static const struct denali_dt_data denali_socfpga_data = {
+	.caps = DENALI_CAP_HW_ECC_FIXUP,
+};
 
+static const struct of_device_id denali_nand_dt_ids[] = {
+	{
+		.compatible = "altr,socfpga-denali-nand",
+		.data = &denali_socfpga_data,
+	},
+	{ /* sentinel */ }
+};
 MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
 
 static u64 denali_dma_mask;