@@ -304,33 +304,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
}
#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-static void arm_v7m_unassigned_access(CPUState *cpu, hwaddr addr,
- bool is_write, bool is_exec, int opaque,
- unsigned size)
-{
- ARMCPU *arm = ARM_CPU(cpu);
- CPUARMState *env = &arm->env;
-
- /* ARMv7-M interrupt return works by loading a magic value into the PC.
- * On real hardware the load causes the return to occur. The qemu
- * implementation performs the jump normally, then does the exception
- * return by throwing a special exception when when the CPU tries to
- * execute code at the magic address.
- */
- if (env->v7m.exception != 0 && addr >= 0xfffffff0 && is_exec) {
- cpu->exception_index = EXCP_EXCEPTION_EXIT;
- cpu_loop_exit(cpu);
- }
-
- /* In real hardware an attempt to access parts of the address space
- * with nothing there will usually cause an external abort.
- * However our QEMU board models are often missing device models where
- * the guest can boot anyway with the default read-as-zero/writes-ignored
- * behaviour that you get without a QEMU unassigned_access hook.
- * So just return here to retain that default behaviour.
- */
-}
-
static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
{
CPUClass *cc = CPU_GET_CLASS(cs);
@@ -338,17 +311,7 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
CPUARMState *env = &cpu->env;
bool ret = false;
- /* ARMv7-M interrupt return works by loading a magic value
- * into the PC. On real hardware the load causes the
- * return to occur. The qemu implementation performs the
- * jump normally, then does the exception return when the
- * CPU tries to execute code at the magic address.
- * This will cause the magic PC value to be pushed to
- * the stack if an interrupt occurred at the wrong time.
- * We avoid this by disabling interrupts when
- * pc contains a magic address.
- *
- * ARMv7-M interrupt masking works differently than -A or -R.
+ /* ARMv7-M interrupt masking works differently than -A or -R.
* There is no FIQ/IRQ distinction. Instead of I and F bits
* masking FIQ and IRQ interrupts, an exception is taken only
* if it is higher priority than the current execution priority
@@ -356,8 +319,7 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
* currently active exception).
*/
if (interrupt_request & CPU_INTERRUPT_HARD
- && (armv7m_nvic_can_take_pending_exception(env->nvic))
- && (env->regs[15] < 0xfffffff0)) {
+ && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
cs->exception_index = EXCP_IRQ;
cc->do_interrupt(cs);
ret = true;
@@ -1091,7 +1053,6 @@ static void arm_v7m_class_init(ObjectClass *oc, void *data)
cc->do_interrupt = arm_v7m_cpu_do_interrupt;
#endif
- cc->do_unassigned_access = arm_v7m_unassigned_access;
cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
}
@@ -11927,14 +11927,6 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
dc->is_jmp = DISAS_EXC;
break;
}
-#else
- if (arm_dc_feature(dc, ARM_FEATURE_M)) {
- /* Branches to the magic exception-return addresses should
- * already have been caught via the arm_v7m_unassigned_access hook,
- * and never get here.
- */
- assert(dc->pc < 0xfffffff0);
- }
#endif
if (unlikely(!QTAILQ_EMPTY(&cs->breakpoints))) {