| Message ID | 1341289805-26091-1-git-send-email-sachin.kamat@linaro.org |
|---|---|
| State | Accepted |
| Headers | show |
Sachin Kamat wrote: > > From: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> > > On Origen board, we have 2 status leds, so adding them as heartbeat and > mmc0 by > default. The patch basically adds the platform data required by > leds-gpio driver. > > Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/mach-exynos/mach-origen.c | 30 ++++++++++++++++++++++++++++++ > 1 files changed, 30 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach- > exynos/mach-origen.c > index 580cc77..8e9a884 100644 > --- a/arch/arm/mach-exynos/mach-origen.c > +++ b/arch/arm/mach-exynos/mach-origen.c > @@ -9,6 +9,7 @@ > */ > > #include <linux/serial_core.h> > +#include <linux/leds.h> > #include <linux/gpio.h> > #include <linux/mmc/host.h> > #include <linux/platform_device.h> > @@ -502,6 +503,34 @@ static void __init origen_ohci_init(void) > /* USB OTG */ > static struct s3c_hsotg_plat origen_hsotg_pdata; > > +static struct gpio_led origen_gpio_leds[] = { > + { > + .name = "origen::status1", > + .default_trigger = "heartbeat", > + .gpio = EXYNOS4_GPX1(3), > + .active_low = 1, > + }, > + { > + .name = "origen::status2", > + .default_trigger = "mmc0", > + .gpio = EXYNOS4_GPX1(4), > + .active_low = 1, > + }, > +}; > + > +static struct gpio_led_platform_data origen_gpio_led_info = { > + .leds = origen_gpio_leds, > + .num_leds = ARRAY_SIZE(origen_gpio_leds), > +}; > + > +static struct platform_device origen_leds_gpio = { > + .name = "leds-gpio", > + .id = -1, > + .dev = { > + .platform_data = &origen_gpio_led_info, > + }, > +}; > + > static struct gpio_keys_button origen_gpio_keys_table[] = { > { > .code = KEY_MENU, > @@ -681,6 +710,7 @@ static struct platform_device *origen_devices[] > __initdata = { > &exynos4_device_ohci, > &origen_device_gpiokeys, > &origen_lcd_hv070wsa, > + &origen_leds_gpio, > &origen_device_bluetooth, > }; > > -- > 1.7.4.1 Applied, thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 580cc77..8e9a884 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -9,6 +9,7 @@ */ #include <linux/serial_core.h> +#include <linux/leds.h> #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> @@ -502,6 +503,34 @@ static void __init origen_ohci_init(void) /* USB OTG */ static struct s3c_hsotg_plat origen_hsotg_pdata; +static struct gpio_led origen_gpio_leds[] = { + { + .name = "origen::status1", + .default_trigger = "heartbeat", + .gpio = EXYNOS4_GPX1(3), + .active_low = 1, + }, + { + .name = "origen::status2", + .default_trigger = "mmc0", + .gpio = EXYNOS4_GPX1(4), + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data origen_gpio_led_info = { + .leds = origen_gpio_leds, + .num_leds = ARRAY_SIZE(origen_gpio_leds), +}; + +static struct platform_device origen_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &origen_gpio_led_info, + }, +}; + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -681,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_leds_gpio, &origen_device_bluetooth, };