diff mbox

[V5,resend] PM / OPP: Use - instead of @ for DT entries

Message ID f8323bb507a97755c7c164f1d2aff45d2f0be3f0.1494217312.git.viresh.kumar@linaro.org
State Accepted
Commit b21569cf1de925e0a42c9964bd7f520cb4a4d875
Headers show

Commit Message

Viresh Kumar May 8, 2017, 4:22 a.m. UTC 
Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Acked-by: Rob Herring <robh@kernel.org>

---
@Rafael: This one needs to go via the PM tree and so sending it again.

 Documentation/devicetree/bindings/opp/opp.txt | 38 +++++++++++++--------------
 1 file changed, 19 insertions(+), 19 deletions(-)

-- 
2.12.0.432.g71c3a4f4ba37

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Stephen Boyd May 23, 2017, 1:36 a.m. UTC | #1 
On 05/08, Viresh Kumar wrote:
> Compiling the DT file with W=1, DTC warns like follows:

> 

> Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a

> unit name, but no reg property

> 

> Fix this by replacing '@' with '-' as the OPP nodes will never have a

> "reg" property.

> 

> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>

> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>

> Suggested-by: Mark Rutland <mark.rutland@arm.com>

> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

> Acked-by: Rob Herring <robh@kernel.org>

> ---


Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 63725498bd20..e36d261b9ba6 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -186,20 +186,20 @@  Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			clock-latency-ns = <290000>;
@@ -265,20 +265,20 @@  independently.
 		 * independently.
 		 */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000;
@@ -341,20 +341,20 @@  DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp@1100000000 {
+		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000>;
@@ -367,20 +367,20 @@  DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1300000000 {
+		opp-1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1050000 1045000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
 		};
-		opp@1400000000 {
+		opp-1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1075000>;
 			opp-microamp = <100000>;
 			clock-latency-ns = <400000>;
 		};
-		opp@1500000000 {
+		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1100000 1010000 1110000>;
 			opp-microamp = <95000>;
@@ -409,7 +409,7 @@  Example 4: Handling multiple regulators
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000>, /* Supply 0 */
 					<960000>, /* Supply 1 */
@@ -422,7 +422,7 @@  Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
 					<965000 960000 975000>, /* Supply 1 */
@@ -435,7 +435,7 @@  Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
 					<965000 960000 975000>, /* Supply 1 */
@@ -467,7 +467,7 @@  Example 5: opp-supported-hw
 		status = "okay";
 		opp-shared;
 
-		opp@600000000 {
+		opp-600000000 {
 			/*
 			 * Supports all substrate and process versions for 0xF
 			 * cuts, i.e. only first four cuts.
@@ -478,7 +478,7 @@  Example 5: opp-supported-hw
 			...
 		};
 
-		opp@800000000 {
+		opp-800000000 {
 			/*
 			 * Supports:
 			 * - cuts: only one, 6th cut (represented by 6th bit).
@@ -510,7 +510,7 @@  Example 5: opp-supported-hw
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt-slow = <915000 900000 925000>;
 			opp-microvolt-fast = <975000 970000 985000>;
@@ -518,7 +518,7 @@  Example 5: opp-supported-hw
 			opp-microamp-fast =  <71000>;
 		};
 
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
 					      <925000 910000 935000>; /* Supply vcc1 */