Current Team Memberships

Show patches with: State = Action Required       |    Archived = No       |   127 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
fit: skip signature verification if board request fit: skip signature verification if board request 0 0 0 2018-04-11 Jun Nie New
common: build ymodem only on need common: build ymodem only on need 0 0 0 2018-02-13 Jun Nie New
common: build ymodem and s_record only on need common: build ymodem and s_record only on need 0 0 0 2018-02-11 Jun Nie New
sunxi: support fuse cmd to read/write fuse sunxi: support fuse cmd to read/write fuse 0 0 0 2018-01-27 Jun Nie New
[[PATCH,v2] 8/8] sunxi: H3: set different otg base address per mode [[PATCH,v2] 8/8] sunxi: H3: set different otg base address per mode 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 7/8] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64 [[PATCH,v2] 7/8] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing [[PATCH,v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 5/8] sunxi: musb: Enable OTG device clock for H3 [[PATCH,v2] 5/8] sunxi: musb: Enable OTG device clock for H3 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 4/8] sunxi: musb: Hack dynamic fifo support for H3 OTG [[PATCH,v2] 4/8] sunxi: musb: Hack dynamic fifo support for H3 OTG 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 3/8] sunxi: Fix USB PHY index for H3/H5/A64 [[PATCH,v2] 3/8] sunxi: Fix USB PHY index for H3/H5/A64 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 2/8] sunxi: musb: Add fifo config for H3 [[PATCH,v2] 2/8] sunxi: musb: Add fifo config for H3 0 0 0 2018-01-05 Jun Nie New
[[PATCH,v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT [[PATCH,v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT 0 0 0 2018-01-05 Jun Nie New
[6/6] sunxi: Add initial Banana-Pi Zero support Add Bananapi Zero board with OTG supported 0 0 0 2018-01-05 Jun Nie New
[5/6] sunxi: usb_phy: Clear PHYCTL register before writing Add Bananapi Zero board with OTG supported 0 0 0 2018-01-05 Jun Nie New
[3/6] sunxi: musb: Enable OTG device clock for H3 Add Bananapi Zero board with OTG supported 0 0 0 2018-01-05 Jun Nie New
[1/6] sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3 Add Bananapi Zero board with OTG supported 0 0 0 2018-01-05 Jun Nie New
[Linaro-uefi,4/4] Platforms/zx: Add platform build system files [Linaro-uefi,1/4] Platforms: Add Sanchip Zx296718 basic library 0 0 0 2017-08-09 Jun Nie New
[Linaro-uefi,3/4] Platforms/zx: Add boot manager lib and entries [Linaro-uefi,1/4] Platforms: Add Sanchip Zx296718 basic library 0 0 0 2017-08-09 Jun Nie New
[Linaro-uefi,2/4] Platforms: Add ZX RTC driver for Sanchip SoC [Linaro-uefi,1/4] Platforms: Add Sanchip Zx296718 basic library 0 0 0 2017-08-09 Jun Nie New
[Linaro-uefi,1/4] Platforms: Add Sanchip Zx296718 basic library [Linaro-uefi,1/4] Platforms: Add Sanchip Zx296718 basic library 0 0 0 2017-08-09 Jun Nie New
[edk2,v6,1/2] EmbeddedPkg/AndroidFastboot: split android boot header [edk2,v6,1/2] EmbeddedPkg/AndroidFastboot: split android boot header 0 0 0 2017-08-09 Jun Nie New
[edk2,v5,3/3] EmbeddedPkg: add Android boot build entry [edk2,v5,1/3] EmbeddedPkg/AndroidFastboot: split android boot header 0 0 0 2017-08-02 Jun Nie New
[edk2,v4,4/4] EmbeddedPkg: add Android boot device path and guid [edk2,v4,1/4] ArmPkg: Move IS_DEVICE_PATH_NODE for sharing 0 0 0 2017-08-01 Jun Nie New
[edk2,v3,1/2] EmbeddedPkg/AndroidBoot: boot android kernel from storage [edk2,v3,1/2] EmbeddedPkg/AndroidBoot: boot android kernel from storage 0 0 0 2017-07-27 Jun Nie New
[edk2,v2,1/2] EmbeddedPkg/AndroidBoot: boot android kernel from storage [edk2,v2,1/2] EmbeddedPkg/AndroidBoot: boot android kernel from storage 0 0 0 2017-07-06 Jun Nie New
[edk2,v2] ArmPlatformPkg: Support different PL011 reg offset 0 0 0 2017-07-04 Jun Nie New
[edk2,2/2] EmbeddedPkg/DwEmmc: Adjust FIFO threshold Untitled series #2685 0 0 0 2017-07-03 Jun Nie New
[edk2] ArmPlatformPkg: Support different reg offset to PL011 0 0 0 2017-07-03 Jun Nie New
[Linaro-uefi,2/2] Drivers/Mmc/DwEmmc: Adjust FIFO threshold [Linaro-uefi,1/2] Drivers/Mmc/DwEmmc: limit max clock for platform 0 0 0 2017-06-30 Jun Nie New
[Linaro-uefi,1/2] Drivers/Mmc/DwEmmc: limit max clock for platform [Linaro-uefi,1/2] Drivers/Mmc/DwEmmc: limit max clock for platform 0 0 0 2017-06-30 Jun Nie New
[edk2] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer 0 0 0 2017-06-29 Jun Nie New
[edk2,v2] EmbeddedPkg/MmcDxe: Add alignment for ECSD data 0 0 0 2017-06-12 Jun Nie New
[edk2] EmbeddedPkg/MmcDxe: Add alignment for ECSD data 0 0 0 2017-06-08 Jun Nie New
[edk2] EmbeddedPkg/MmcDxe: Add non-DDR timing mode support 0 0 0 2017-06-08 Jun Nie New
[v9,3/5] mmc: dw: Add fifo watermark alignment property 0 0 0 2017-01-06 Jun Nie New
[v9,2/5] mmc: dw: Add fifo address property 0 0 0 2017-01-06 Jun Nie New
[v8,5/5] mmc: zx: Initial support for ZX mmc controller 0 0 0 2016-12-22 Jun Nie New
[v8,4/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings 0 0 0 2016-12-22 Jun Nie New
[v8,3/5] mmc: dw: Add fifo watermark alignment property 0 0 0 2016-12-22 Jun Nie New
[v6,4/5] mmc: dw: Add fifo address property 0 0 0 2016-11-18 Jun Nie New
[v6,3/5] Documentation: synopsys-dw-mshc: add binding for fifo quirks 0 0 0 2016-11-18 Jun Nie New
[v2,4/5] mmc: dw: Add fifo address property 0 0 0 2016-10-28 Jun Nie New
[5/5] mmc: dw: Add fifo watermark quirk 0 0 0 2016-10-24 Jun Nie New
[3/5] Documentation: synopsys-dw-mshc: add binding for fifo quirks 0 0 0 2016-10-24 Jun Nie New
[v2,2/2] arm64: dts: zx: Add clock controller nodes 0 0 0 2016-10-13 Jun Nie New
[v2,1/2] arm64: dts: zx: Fix gic GICR property 0 0 0 2016-10-13 Jun Nie New
[1/2] arm64: dts: zx: Change gic node to fix boot failure 0 0 0 2016-10-12 Jun Nie New
[v5,3/3] arm64: defconfig: enable ZTE ZX related config 0 0 0 2016-09-13 Jun Nie New
[v5,2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 0 0 0 2016-09-13 Jun Nie New
[v5,1/3] arm64: add ZTE ZX SoC family 0 0 0 2016-09-13 Jun Nie New
[v4,2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 0 0 0 2016-09-06 Jun Nie New
[v3,2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 0 0 0 2016-09-01 Jun Nie New
[3/3] pinctrl: zx: Add ZTE ZX SoC pinctrl driver 0 0 0 2016-08-26 Jun Nie New
[2/3] pinctrl: zx: Add ZTE pinctrl dts document 0 0 0 2016-08-26 Jun Nie New
[1/3] pinctrl: export pin_request to support parent pin 0 0 0 2016-08-26 Jun Nie New
pinctrl: Add ZTE ZX SoC pinctrl drivers 0 0 0 2016-08-05 Jun Nie New
[v2] serial: amba-pl011: complete support to ZTE uart 0 0 0 2016-03-23 Jun Nie New
[1/2] serial: amba-pl011: make platform driver generic 0 0 0 2016-03-14 Jun Nie New
tty: amba-pl011: add support for ZTE UART 0 0 0 2015-11-17 Jun Nie New
[v2] serial: pl011: Fix earlycon register LUT breakage 0 0 0 2015-09-05 Jun Nie New
earlycon issues in -next with amba-pl011 updates 0 0 0 2015-09-05 Jun Nie New
serial: pl011: Fix earlycon register LUT breakage 0 0 0 2015-09-05 Jun Nie New
[v2] pinctrl: single: support GPIO for bits pinctrl 0 0 0 2015-07-06 Jun Nie New
[v2] power/reset: zx: Register restart handler 0 0 0 2015-07-06 Jun Nie New
[v2] gpio: zx: Add ZTE zx296702 GPIO support 0 0 0 2015-06-24 Jun Nie New
[v12,5/5] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-06-23 Jun Nie New
[v12,4/5] uart: pl011: Improve LCRH register access decision 0 0 0 2015-06-23 Jun Nie New
[v12,3/5] uart: pl011: Introduce register look up table 0 0 0 2015-06-23 Jun Nie New
[v12,2/5] uart: pl011: Introduce register accessor 0 0 0 2015-06-23 Jun Nie New
[v12,1/5] uart: pl011: Rename regs with enumeration 0 0 0 2015-06-23 Jun Nie New
[v11,5/5] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-06-23 Jun Nie New
[v11,4/5] uart: pl011: Improve LCRH register access decision 0 0 0 2015-06-23 Jun Nie New
[v11,3/5] uart: pl011: Introduce register look up table 0 0 0 2015-06-23 Jun Nie New
[v11,2/5] uart: pl011: Introduce register accessor 0 0 0 2015-06-23 Jun Nie New
[v11,1/5] uart: pl011: Rename regs with enumeration 0 0 0 2015-06-23 Jun Nie New
pinctrl: single: support GPIO for bits pinctrl 0 0 0 2015-06-17 Jun Nie New
[2/2] gpio: zx: Add ZTE zx296702 GPIO support 0 0 0 2015-06-12 Jun Nie New
pinctrl: single: support GPIO for bits pinctrl 0 0 0 2015-06-12 Jun Nie New
[v5,4/4] ASoC: zx: Add ZTE zx296702 I2S DAI driver 0 0 0 2015-06-04 Jun Nie New
[v5,3/4] ASoC: zx: Add zx296702 SPDIF support 0 0 0 2015-06-04 Jun Nie New
[v10,3/3] uart: pl011: polish registers offset handling 0 0 0 2015-06-01 Jun Nie New
[v10,2/3] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-06-01 Jun Nie New
[v10,1/3] uart: pl011: Support registers offset with LUT 0 0 0 2015-06-01 Jun Nie New
[v3,6/6] ASoC: zx: add zx296702 hdmi codec 0 0 0 2015-05-29 Jun Nie New
[v3,4/6] ASoC: zx: Add zx296702 SPDIF support 0 0 0 2015-05-29 Jun Nie New
[v3,3/6] dt: Add doc for the ZTE HDMI audio codec binding 0 0 0 2015-05-29 Jun Nie New
[v5,2/4] clk: zx: add clock support to zx296702 0 0 0 2015-05-29 Jun Nie New
[1/2] ASoC: zx: Add ZTE zx296702 I2S DAI driver 0 0 0 2015-05-20 Jun Nie New
[v9,3/3] uart: pl011: polish registers offset handling 0 0 0 2015-05-04 Jun Nie New
[v9,2/3] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-05-04 Jun Nie New
[v9,1/3] uart: pl011: Support registers offset with LUT 0 0 0 2015-05-04 Jun Nie New
[v8,3/3] uart: pl011: polish registers offset handling 0 0 0 2015-04-30 Jun Nie New
[v8,2/3] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-04-30 Jun Nie New
[v8,1/3] uart: pl011: Support registers offset with LUT 0 0 0 2015-04-30 Jun Nie New
[v7,3/3] uart: pl011: polish registers offset handling 0 0 0 2015-04-29 Jun Nie New
[v7,2/3] uart: pl011: Add support to ZTE ZX296702 uart 0 0 0 2015-04-29 Jun Nie New
[v7,1/3] uart: pl011: Support registers offset with LUT 0 0 0 2015-04-29 Jun Nie New
[v4,5/7] clk: zx: add clock support to zx296702 0 0 0 2015-04-28 Jun Nie New
[v3,7/9] ARM: zx: Add basic defconfig support for ZX296702 0 0 0 2015-04-27 Jun Nie New
[v3,5/9] clk: zx: add clock support to zx296702 0 0 0 2015-04-27 Jun Nie New
« 1 2 »

Bundling

Create bundle: