From patchwork Wed Apr 27 13:16:49 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ard Biesheuvel X-Patchwork-Id: 66793 Delivered-To: patch@linaro.org Received: by 10.140.93.198 with SMTP id d64csp2184277qge; Wed, 27 Apr 2016 06:18:20 -0700 (PDT) X-Received: by 10.107.130.160 with SMTP id m32mr11356623ioi.137.1461763099850; Wed, 27 Apr 2016 06:18:19 -0700 (PDT) Return-Path: Received: from lists.linaro.org (lists.linaro.org. [54.225.227.206]) by mx.google.com with ESMTP id 19si9781444iod.17.2016.04.27.06.18.19; Wed, 27 Apr 2016 06:18:19 -0700 (PDT) Received-SPF: pass (google.com: domain of linaro-uefi-bounces@lists.linaro.org designates 54.225.227.206 as permitted sender) client-ip=54.225.227.206; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linaro-uefi-bounces@lists.linaro.org designates 54.225.227.206 as permitted sender) smtp.mailfrom=linaro-uefi-bounces@lists.linaro.org; dmarc=pass (p=NONE dis=NONE) header.from=linaro.org Received: by lists.linaro.org (Postfix, from userid 109) id 0B3F9610D5; Wed, 27 Apr 2016 13:18:19 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on ip-10-142-244-252 X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_LOW, RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL, URIBL_BLOCKED autolearn=disabled version=3.4.0 Received: from [127.0.0.1] (localhost [127.0.0.1]) by lists.linaro.org (Postfix) with ESMTP id 5B11F6044B; Wed, 27 Apr 2016 13:18:01 +0000 (UTC) X-Original-To: linaro-uefi@lists.linaro.org Delivered-To: linaro-uefi@lists.linaro.org Received: by lists.linaro.org (Postfix, from userid 109) id 749856044B; Wed, 27 Apr 2016 13:17:44 +0000 (UTC) Received: from mail-wm0-f42.google.com (mail-wm0-f42.google.com [74.125.82.42]) by lists.linaro.org (Postfix) with ESMTPS id 4F94F6044B for ; Wed, 27 Apr 2016 13:17:05 +0000 (UTC) Received: by mail-wm0-f42.google.com with SMTP id n129so26999814wmn.1 for ; Wed, 27 Apr 2016 06:17:05 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=Zo1DCTpbTgY4v8YQnprXODdqXqgEh6ju3s33OIW+KwY=; b=PPxkpZe/aevchHKXIxK79wsttIEtPVsNYdkOvcJeKpFswmX2nE9XqoL9bIzK+ntX/+ sTNT/ROOERuCr4azND/cQsZEoUFWOHHmEMyGaT79bVQ0ugu8iMevgkDxNhXP8ZxCtzvb NfP5A5WQKDPz+N9S/73JbD0I6EZn4YxEKxejYtGvl1dpji/YVRIC980dFt30M0BGn0OM NoB66EOJPIfSjN+A6o1XRdG4MBPuqAFyv4bPco4RTwsCucivBFcu8K6IghlUllstd3nT N/k+jHbbNyCrERGGqZa4l/V66Pjaocgi49w1wE8ShE4EqB8eZ8AupthL74WtGZYs+KtB nfFA== X-Gm-Message-State: AOPr4FVlP6wWBw9/CUydBWa+XNhCt8ZitZA8ch42dBQZbbVdhIcpGA8dmtGvgPw8ZXiJ39Fwv84= X-Received: by 10.28.0.87 with SMTP id 84mr23512040wma.68.1461763023870; Wed, 27 Apr 2016 06:17:03 -0700 (PDT) Received: from localhost.localdomain ([195.55.142.58]) by smtp.gmail.com with ESMTPSA id w77sm29244897wmw.10.2016.04.27.06.16.55 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 27 Apr 2016 06:17:03 -0700 (PDT) From: Ard Biesheuvel To: linaro-uefi@lists.linaro.org, ricardo.salveti@linaro.org, leif.lindholm@linaro.org, graeme.gregory@linaro.org Date: Wed, 27 Apr 2016 15:16:49 +0200 Message-Id: <1461763009-23741-3-git-send-email-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1461763009-23741-1-git-send-email-ard.biesheuvel@linaro.org> References: <1461763009-23741-1-git-send-email-ard.biesheuvel@linaro.org> Cc: leo.duran@amd.com Subject: [Linaro-uefi] [PATCH 2/2] Platform/AMD/Styx: move to generic PciLib and PciHostBridgeDxe X-BeenThere: linaro-uefi@lists.linaro.org X-Mailman-Version: 2.1.16 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: linaro-uefi-bounces@lists.linaro.org Sender: "Linaro-uefi" Now that the dependencies (PciHostBridgeLib and ArmPciCpuIo2Dxe) are in place, we can drop the home cooked implementations of PciLib and PciHostBridgeDxe, and move to the generic ones instead, Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel --- Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.c | 1285 ------------ Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.h | 498 ----- Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf | 54 - Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 2150 -------------------- Platforms/AMD/Styx/HuskyBoard/HuskyBoard.dsc | 14 +- Platforms/AMD/Styx/HuskyBoard/HuskyBoard.fdf | 6 +- Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc | 14 +- Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf | 6 +- 8 files changed, 22 insertions(+), 4005 deletions(-) diff --git a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.c b/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.c deleted file mode 100644 index 66fb27be55ad..000000000000 --- a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.c +++ /dev/null @@ -1,1285 +0,0 @@ -/** @file - Provides the basic interfaces to abstract a PCI Host Bridge Resource Allocation - -Copyright (c) 2008 - 2013, Intel Corporation. All rights reserved.
-This program and the accompanying materials are -licensed and made available under the terms and conditions of the BSD License -which accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "PciHostBridge.h" -#include - -#define AMD_PCI_PMEM64 1 - -// -// Hard code: Root Bridge Number within the host bridge -// Root Bridge's attribute -// Root Bridge's device path -// Root Bridge's resource aperture -// -UINTN RootBridgeNumber[1] = { 1 }; - -#if AMD_PCI_PMEM64 // AMD_PCI_PMEM64 -// -// Copy from MdeModulePkg\Bus\Pci\PciBusDxe\PciBus.h -// -#define EFI_BRIDGE_IO32_DECODE_SUPPORTED 0x0001 -#define EFI_BRIDGE_PMEM32_DECODE_SUPPORTED 0x0002 -#define EFI_BRIDGE_PMEM64_DECODE_SUPPORTED 0x0004 -#define EFI_BRIDGE_IO16_DECODE_SUPPORTED 0x0008 -#define EFI_BRIDGE_PMEM_MEM_COMBINE_SUPPORTED 0x0010 -#define EFI_BRIDGE_MEM64_DECODE_SUPPORTED 0x0020 -#define EFI_BRIDGE_MEM32_DECODE_SUPPORTED 0x0040 -UINT64 RootBridgeAttribute[1][1] = { - { EFI_BRIDGE_MEM32_DECODE_SUPPORTED | EFI_BRIDGE_IO16_DECODE_SUPPORTED | EFI_BRIDGE_PMEM64_DECODE_SUPPORTED } -}; -#else // AMD_PCI_PMEM64 -UINT64 RootBridgeAttribute[1][1] = { - { EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM } -}; -#endif // AMD_PCI_PMEM64 - -EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[1][1] = { - { - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A08), // PCI Express - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - } - }, -}; - -PCI_ROOT_BRIDGE_RESOURCE_APERTURE mResAperture[1][1] = { - {{ 0, 255, 0x40000000, 0x20000000, 0xEFFF0000, 0x10000}}, -}; - -EFI_HANDLE mDriverImageHandle; - -PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = { - PCI_HOST_BRIDGE_SIGNATURE, // Signature - NULL, // HostBridgeHandle - 0, // RootBridgeNumber - {NULL, NULL}, // Head - FALSE, // ResourceSubiteed - TRUE, // CanRestarted - { - NotifyPhase, - GetNextRootBridge, - GetAttributes, - StartBusEnumeration, - SetBusNumbers, - SubmitResources, - GetProposedResources, - PreprocessController - } -}; - -// -// Implementation -// - -/** - Entry point of this driver - - @param ImageHandle Handle of driver image - @param SystemTable Point to EFI_SYSTEM_TABLE - - @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource - @retval EFI_DEVICE_ERROR Can not install the protocol instance - @retval EFI_SUCCESS Success to initialize the Pci host bridge. -**/ -EFI_STATUS -EFIAPI -InitializePciHostBridge ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - UINTN Loop1; - UINTN Loop2; - PCI_HOST_BRIDGE_INSTANCE *HostBridge; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - mDriverImageHandle = ImageHandle; - - DEBUG((EFI_D_ERROR, "%a () - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR 0x%x\n", - __FUNCTION__, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR))); - - // - // Create Host Bridge Device Handle - // - for (Loop1 = 0; Loop1 < HOST_BRIDGE_NUMBER; Loop1++) { - HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), &mPciHostBridgeInstanceTemplate); - if (HostBridge == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1]; - InitializeListHead (&HostBridge->Head); - - Status = gBS->InstallMultipleProtocolInterfaces ( - &HostBridge->HostBridgeHandle, - &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc, - NULL - ); - if (EFI_ERROR (Status)) { - FreePool (HostBridge); - return EFI_DEVICE_ERROR; - } - - // - // Create Root Bridge Device Handle in this Host Bridge - // - - for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) { - PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE)); - if (PrivateData == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE; - PrivateData->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2]; - - RootBridgeConstructor ( - &PrivateData->Io, - HostBridge->HostBridgeHandle, - RootBridgeAttribute[Loop1][Loop2], - &mResAperture[Loop1][Loop2] - ); - - Status = gBS->InstallMultipleProtocolInterfaces( - &PrivateData->Handle, - &gEfiDevicePathProtocolGuid, PrivateData->DevicePath, - &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io, - NULL - ); - if (EFI_ERROR (Status)) { - FreePool(PrivateData); - return EFI_DEVICE_ERROR; - } - - InsertTailList (&HostBridge->Head, &PrivateData->Link); - } - } - - return EFI_SUCCESS; -} - - -/** - These are the notifications from the PCI bus driver that it is about to enter a certain - phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform specific actions, - including any chipset-specific initialization, so that the chipset is ready to enter the next phase. - Eight notification points are defined at this time. See belows: - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data - structures. The PCI enumerator should issue this notification - before starting a fresh enumeration process. Enumeration cannot - be restarted after sending any other notification such as - EfiPciHostBridgeBeginBusAllocation. - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is - required here. This notification can be used to perform any - chipset-specific programming. - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No - specific action is required here. This notification can be used to - perform any chipset-specific programming. - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about to begin. No specific - action is required here. This notification can be used to perform - any chipset-specific programming. - EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI - root bridges. These resource settings are returned on the next call to - GetProposedResources(). Before calling NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible - for gathering I/O and memory requests for - all the PCI root bridges and submitting these requests using - SubmitResources(). This function pads the resource amount - to suit the root bridge hardware, takes care of dependencies between - the PCI root bridges, and calls the Global Coherency Domain (GCD) - with the allocation request. In the case of padding, the allocated range - could be bigger than what was requested. - EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated - resources (proposed resources) for all the PCI root bridges. After the - hardware is programmed, reassigning resources will not be supported. - The bus settings are not affected. - EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI - root bridges and resets the I/O and memory apertures to their initial - state. The bus settings are not affected. If the request to allocate - resources fails, the PCI enumerator can use this notification to - deallocate previous resources, adjust the requests, and retry - allocation. - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is - required here. This notification can be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error - is valid for a Phase of EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one or more - PCI root bridges before this call - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid - for a Phase of EfiPciHostBridgeSetResources. - @retval EFI_INVALID_PARAMETER Invalid phase parameter - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the - previously submitted resource requests cannot be fulfilled or - were only partially fulfilled. - @retval EFI_SUCCESS The notification was accepted without any errors. - -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - PCI_RESOURCE_TYPE Index; - LIST_ENTRY *List; - EFI_PHYSICAL_ADDRESS BaseAddress; - UINT64 AddrLen; - UINTN BitsOfAlignment; - EFI_STATUS Status; - EFI_STATUS ReturnStatus; - UINT64 Attributes; - EFI_GCD_MEMORY_SPACE_DESCRIPTOR GcdMemorySpaceDescriptor; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - - switch (Phase) { - - case EfiPciHostBridgeBeginEnumeration: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeBeginEnumeration( %d )\n", __LINE__)); - if (HostBridgeInstance->CanRestarted) { - // - // Reset the Each Root Bridge - // - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeMax; Index++) { - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; - } else { - // - // Can not restart - // - return EFI_NOT_READY; - } - break; - - case EfiPciHostBridgeEndEnumeration: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeEndEnumeration( %d )\n", __LINE__)); - // - // No specific action is required here, can perform any chipset specific programing - // - return EFI_SUCCESS; - - case EfiPciHostBridgeBeginBusAllocation: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeBeginBusAllocation( %d )\n", __LINE__)); - // - // No specific action is required here, can perform any chipset specific programing - // - HostBridgeInstance->CanRestarted = FALSE; - return EFI_SUCCESS; - - case EfiPciHostBridgeEndBusAllocation: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeEndBusAllocation( %d )\n", __LINE__)); - // - // No specific action is required here, can perform any chipset specific programing - // - return EFI_SUCCESS; - - case EfiPciHostBridgeBeginResourceAllocation: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeBeginResourceAllocation( %d )\n", __LINE__)); - // - // No specific action is required here, can perform any chipset specific programing - // - return EFI_SUCCESS; - - case EfiPciHostBridgeAllocateResources: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeAllocateResources( %d )\n", __LINE__)); - ReturnStatus = EFI_SUCCESS; - if (HostBridgeInstance->ResourceSubmited) { - // - // Take care of the resource dependencies between the root bridges - // - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - - // - // Get the number of '1' in Alignment. - // - BitsOfAlignment = (UINTN) (HighBitSet64 (RootBridgeInstance->ResAllocNode[Index].Alignment) + 1); - - switch (Index) { - - case TypeIo: - // - // It is impossible for this chipset to align 0xFFFF for IO16 - // So clear it - // - if (BitsOfAlignment >= 16) { - BitsOfAlignment = 0; - } - - Status = gDS->AllocateIoSpace ( - EfiGcdAllocateAnySearchBottomUp, - EfiGcdIoTypeIo, - BitsOfAlignment, - AddrLen, - &BaseAddress, - mDriverImageHandle, - NULL - ); - - if (!EFI_ERROR (Status)) { - RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress; - RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated; - } else { - ReturnStatus = Status; - if (Status != EFI_OUT_OF_RESOURCES) { - RootBridgeInstance->ResAllocNode[Index].Length = 0; - } - } - - break; - - - case TypeMem32: - // - // It is impossible for this chipset to align 0xFFFFFFFF for Mem32 - // So clear it - // - - if (BitsOfAlignment >= 32) { - BitsOfAlignment = 0; - } - -#if AMD_PCI_PMEM64 // AMD_PCI_PMEM64 - case TypePMem64: - if (BitsOfAlignment >= 64) { - BitsOfAlignment = 0; - } -#endif // AMD_PCI_PMEM64 - - Status = gDS->AllocateMemorySpace ( - EfiGcdAllocateAnySearchBottomUp, - EfiGcdMemoryTypeMemoryMappedIo, - BitsOfAlignment, - AddrLen, - &BaseAddress, - mDriverImageHandle, - NULL - ); - - if (!EFI_ERROR (Status)) { - Status = gDS->GetMemorySpaceDescriptor ((EFI_PHYSICAL_ADDRESS)BaseAddress, &GcdMemorySpaceDescriptor); - ASSERT_EFI_ERROR (Status); - Attributes = GcdMemorySpaceDescriptor.Attributes | EFI_MEMORY_RUNTIME | EFI_MEMORY_UC; - Status = gDS->SetMemorySpaceAttributes ( - (EFI_PHYSICAL_ADDRESS)BaseAddress, - AddrLen, - Attributes - ); - ASSERT_EFI_ERROR (Status); - - // We were able to allocate the PCI memory - RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress; - RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated; - - } else { - // Not able to allocate enough PCI memory - ReturnStatus = Status; - - if (Status != EFI_OUT_OF_RESOURCES) { - RootBridgeInstance->ResAllocNode[Index].Length = 0; - } - // ASSERT_EFI_ERROR (Status); - } - break; - - case TypePMem32: - case TypeMem64: -#if AMD_PCI_PMEM64 != 1 // AMD_PCI_PMEM64 - case TypePMem64: -#endif // AMD_PCI_PMEM64 - ReturnStatus = EFI_ABORTED; - break; - default: - ASSERT (FALSE); - break; - }; //end switch - } - } - - List = List->ForwardLink; - } - return ReturnStatus; - - } else { - return EFI_NOT_READY; - } - break; - - case EfiPciHostBridgeSetResources: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeSetResources( %d )\n", __LINE__)); - break; - - case EfiPciHostBridgeFreeResources: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeFreeResources( %d )\n", __LINE__)); - ReturnStatus = EFI_SUCCESS; - List = HostBridgeInstance->Head.ForwardLink; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) { - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base; - switch (Index) { - - case TypeIo: - Status = gDS->FreeIoSpace (BaseAddress, AddrLen); - if (EFI_ERROR (Status)) { - ReturnStatus = Status; - } - break; - - case TypeMem32: -#if AMD_PCI_PMEM64 // AMD_PCI_PMEM64 - case TypePMem64: -#endif // AMD_PCI_PMEM64 - Status = gDS->FreeMemorySpace (BaseAddress, AddrLen); - if (EFI_ERROR (Status)) { - ReturnStatus = Status; - } - break; - - case TypePMem32: - break; - - case TypeMem64: - break; - -#if AMD_PCI_PMEM64 != 1 // AMD_PCI_PMEM64 - case TypePMem64: - break; -#endif // AMD_PCI_PMEM64 - - default: - ASSERT (FALSE); - break; - - }; //end switch - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; - return ReturnStatus; - - case EfiPciHostBridgeEndResourceAllocation: - // DEBUG((EFI_D_ERROR, "EfiPciHostBridgeEndResourceAllocation( %d )\n", __LINE__)); - HostBridgeInstance->CanRestarted = FALSE; - break; - - default: - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} - -/** - Return the device handle of the next PCI root bridge that is associated with this Host Bridge. - - This function is called multiple times to retrieve the device handles of all the PCI root bridges that - are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI - root bridges. On each call, the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next PCI root bridge. The - caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - for that root bridge. When there are no more PCI root bridges to report, the interface returns - EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they - are returned by this function. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ) -{ - BOOLEAN NoRootBridge; - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - // DEBUG((EFI_D_ERROR, "GetNextRootBridge()\n")); - NoRootBridge = TRUE; - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - NoRootBridge = FALSE; - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (*RootBridgeHandle == NULL) { - // - // Return the first Root Bridge Handle of the Host Bridge - // - // DEBUG((EFI_D_ERROR, "GetNextRootBridge( %d )\n", __LINE__)); - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - if (*RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Get next if have - // - List = List->ForwardLink; - if (List!=&HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - // DEBUG((EFI_D_ERROR, "GetNextRootBridge( %d )\n", __LINE__)); - return EFI_NOT_FOUND; - } - } - } - - List = List->ForwardLink; - } //end while - - if (NoRootBridge) { - // DEBUG((EFI_D_ERROR, "GetNextRootBridge( %d )\n", __LINE__)); - return EFI_NOT_FOUND; - } else { - // DEBUG((EFI_D_ERROR, "GetNextRootBridge( %d )\n", __LINE__)); - return EFI_INVALID_PARAMETER; - } -} - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary - from one PCI root bridge to another. These attributes are different from the decode-related - attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device - handles of all the root bridges that are associated with this host bridge must be obtained by calling - GetNextRootBridge(). The attributes are static in the sense that they do not change during or - after the enumeration process. The hardware may provide mechanisms to change the attributes on - the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is - installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine multiple resource requests. - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to - include requests for the prefetchable memory in the nonprefetchable memory pool and not request any - prefetchable memory. - Attribute Description - ------------------------------------ ---------------------------------------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate - windows for nonprefetchable and prefetchable memory. A PCI bus - driver needs to include requests for prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory - windows. If this bit is not set, the PCI bus driver needs to include - requests for a 64-bit memory address in the corresponding 32-bit - memory pool. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type - EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Attributes The pointer to attribte of root bridge, it is output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - @retval EFI_SUCCESS Success to get attribute of interested root bridge. - -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - // DEBUG((EFI_D_ERROR, "GetAttributes()\n")); - if (Attributes == NULL) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - *Attributes = RootBridgeInstance->RootBridgeAttrib; - return EFI_SUCCESS; - } - List = List->ForwardLink; - } - - // - // RootBridgeHandle is not an EFI_HANDLE - // that was returned on a previous call to GetNextRootBridge() - // - return EFI_INVALID_PARAMETER; -} - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns the PCI bus range - over which the search should be performed in ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. - -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - VOID *Buffer; - UINT8 *Temp; - UINT64 BusStart; - UINT64 BusEnd; - - // DEBUG((EFI_D_ERROR, "StartBusEnumeration()\n")); - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Set up the Root Bridge for Bus Enumeration - // - BusStart = RootBridgeInstance->BusBase; - BusEnd = RootBridgeInstance->BusLimit; - // - // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR - // - - Buffer = AllocatePool (sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Temp = (UINT8 *)Buffer; - - // DEBUG((EFI_D_ERROR, "StartBusEnumeration() - Creating BUS descriptor\n")); - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = ACPI_ADDRESS_SPACE_TYPE_BUS; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = BusEnd; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = BusEnd - BusStart + 1; - - Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = ACPI_END_TAG_DESCRIPTOR; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - *Configuration = Buffer; - return EFI_SUCCESS; - } - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI bus range. - - This member function programs the specified PCI root bridge to decode the bus range that is - specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than - bus descriptors. - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors. - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed. - -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Ptr; - UINTN BusStart; - UINTN BusEnd; - UINTN BusLen; - - // DEBUG((EFI_D_ERROR, "SetBusNumbers()\n")); - if (Configuration == NULL) { - return EFI_INVALID_PARAMETER; - } - - Ptr = Configuration; - - // - // Check the Configuration is valid - // - if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != ACPI_ADDRESS_SPACE_TYPE_BUS) { - return EFI_INVALID_PARAMETER; - } - - Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - if (*Ptr != ACPI_END_TAG_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Ptr = Configuration; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - BusStart = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrRangeMin; - BusLen = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrLen; - BusEnd = BusStart + BusLen - 1; - - if (BusStart > BusEnd) { - return EFI_INVALID_PARAMETER; - } - - if ((BusStart < RootBridgeInstance->BusBase) || (BusEnd > RootBridgeInstance->BusLimit)) { - return EFI_INVALID_PARAMETER; - } - - // - // Update the Bus Range - // - RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart; - RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen; - RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated; - - // - // Program the Root Bridge Hardware - // - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - - -/** - Submits the I/O and memory resource requirements for the specified PCI root bridge. - - This function is used to submit all the I/O and memory resources that are required by the specified - PCI root bridge. The input parameter Configuration is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted. - @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are - not supported by this PCI root bridge. This error will happen if the caller - did not combine resources according to Attributes that were returned by - GetAllocAttributes(). - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge. - -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 AddrLen; - UINT64 Alignment; - - // DEBUG((EFI_D_ERROR, "SubmitResources()\n")); - // - // Check the input parameter: Configuration - // - if (Configuration == NULL) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Temp = (UINT8 *)Configuration; - while ( *Temp == ACPI_ADDRESS_SPACE_DESCRIPTOR) { - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - } - if (*Temp != ACPI_END_TAG_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - Temp = (UINT8 *)Configuration; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - while ( *Temp == ACPI_ADDRESS_SPACE_DESCRIPTOR) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - - // - // Check Address Length - // - if (Ptr->AddrLen > 0xffffffff) { - return EFI_INVALID_PARAMETER; - } - - // - // Check address range alignment - // - if (Ptr->AddrRangeMax >= 0xffffffff || Ptr->AddrRangeMax != (GetPowerOfTwo64 (Ptr->AddrRangeMax + 1) - 1)) { - return EFI_INVALID_PARAMETER; - } - - switch (Ptr->ResType) { - - case ACPI_ADDRESS_SPACE_TYPE_MEM: - - // - // Check invalid Address Sapce Granularity - // -#if AMD_PCI_PMEM64 != 1 // AMD_PCI_PMEM64 - if (Ptr->AddrSpaceGranularity != 32) { - return EFI_INVALID_PARAMETER; - } -#endif // AMD_PCI_PMEM64 - - // - // check the memory resource request is supported by PCI root bridge - // - if (RootBridgeInstance->RootBridgeAttrib == EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM && - Ptr->SpecificFlag == 0x06) { - return EFI_INVALID_PARAMETER; - } - - AddrLen = Ptr->AddrLen; - Alignment = Ptr->AddrRangeMax; - if (Ptr->AddrSpaceGranularity == 32) { - if (Ptr->SpecificFlag == 0x06) { - // - // Apply from GCD - // - RootBridgeInstance->ResAllocNode[TypePMem32].Status = ResSubmitted; - } else { - RootBridgeInstance->ResAllocNode[TypeMem32].Length = AddrLen; - RootBridgeInstance->ResAllocNode[TypeMem32].Alignment = Alignment; - RootBridgeInstance->ResAllocNode[TypeMem32].Status = ResRequested; - HostBridgeInstance->ResourceSubmited = TRUE; - } - } - - if (Ptr->AddrSpaceGranularity == 64) { - if (Ptr->SpecificFlag == 0x06) { -#if AMD_PCI_PMEM64 // AMD_PCI_PMEM64 - RootBridgeInstance->ResAllocNode[TypePMem64].Length = AddrLen; - RootBridgeInstance->ResAllocNode[TypePMem64].Alignment = Alignment; - RootBridgeInstance->ResAllocNode[TypePMem64].Status = ResRequested; -#else // AMD_PCI_PMEM64 - RootBridgeInstance->ResAllocNode[TypePMem64].Status = ResSubmitted; -#endif // AMD_PCI_PMEM64 - } else { - RootBridgeInstance->ResAllocNode[TypeMem64].Status = ResSubmitted; - } - } - break; - - case ACPI_ADDRESS_SPACE_TYPE_IO: - AddrLen = (UINTN) Ptr->AddrLen; - Alignment = (UINTN) Ptr->AddrRangeMax; - RootBridgeInstance->ResAllocNode[TypeIo].Length = AddrLen; - RootBridgeInstance->ResAllocNode[TypeIo].Alignment = Alignment; - RootBridgeInstance->ResAllocNode[TypeIo].Status = ResRequested; - HostBridgeInstance->ResourceSubmited = TRUE; - break; - - default: - break; - }; - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - } - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the specified PCI root bridge. The - proposed resource settings are prepared when NotifyPhase() is called with a Phase of - EfiPciHostBridgeAllocateResources. The output parameter Configuration - specifies the following: - - The various types of resources, excluding bus resources, that are allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINTN Index; - UINTN Number; - VOID *Buffer; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 ResStatus; - - // DEBUG((EFI_D_ERROR, "GetProposedResources()\n")); - Buffer = NULL; - Number = 0; - // - // Get the Host Bridge Instance from the resource allocation protocol - // - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - for (Index = 0; Index < TypeBus; Index ++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Number ++; - } - } - - if (Number == 0) { - return EFI_INVALID_PARAMETER; - } - - Buffer = AllocateZeroPool (Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Temp = Buffer; - for (Index = 0; Index < TypeBus; Index ++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - ResStatus = RootBridgeInstance->ResAllocNode[Index].Status; - - switch (Index) { - - case TypeIo: - // - // Io - // - Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - Ptr->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypeMem32: - // - // Memory 32 - // - Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - Ptr->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 32; - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypePMem32: - // - // Prefetch memory 32 - // - Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - Ptr->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 32; - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; - break; - - case TypeMem64: - // - // Memory 64 - // - Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - Ptr->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 64; - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; - break; - - case TypePMem64: - // - // Prefetch memory 64 - // - Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; - Ptr->Len = sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 64; -#if AMD_PCI_PMEM64 // AMD_PCI_PMEM64 - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; -#else // AMD_PCI_PMEM64 - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; -#endif // AMD_PCI_PMEM64 - break; - }; - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - } - } - - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = ACPI_END_TAG_DESCRIPTOR; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - *Configuration = Buffer; - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various - stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual - PCI controllers before enumeration. - - This function is called during the PCI enumeration process. No specific action is expected from this - member function. It allows the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 Specification. - @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI - configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for - the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should - not enumerate this device, including its child devices if it is a PCI-to-PCI - bridge. - -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - LIST_ENTRY *List; - - // DEBUG((EFI_D_ERROR, "PreprocessController()\n")); - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - break; - } - List = List->ForwardLink; - } - if (List == &HostBridgeInstance->Head) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Phase > EfiPciBeforeResourceCollection) { - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} diff --git a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.h b/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.h deleted file mode 100644 index f91b42a27572..000000000000 --- a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridge.h +++ /dev/null @@ -1,498 +0,0 @@ -/** @file - The Header file of the Pci Host Bridge Driver - - Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.
- This program and the accompanying materials are - licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _PCI_HOST_BRIDGE_H_ -#define _PCI_HOST_BRIDGE_H_ - -#include - -#include -#include - -#include -#include -#include -#include - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -// -// Hard code the host bridge number in the platform. -// In this chipset, there are two host bridges. -// -#define HOST_BRIDGE_NUMBER 1 - -#define MAX_PCI_DEVICE_NUMBER 31 -#define MAX_PCI_FUNCTION_NUMBER 7 -#define MAX_PCI_REG_ADDRESS 0xFF - -typedef enum { - IoOperation, - MemOperation, - PciOperation -} OPERATION_TYPE; - -#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't') -typedef struct { - UINTN Signature; - EFI_HANDLE HostBridgeHandle; - UINTN RootBridgeNumber; - LIST_ENTRY Head; - BOOLEAN ResourceSubmited; - BOOLEAN CanRestarted; - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc; -} PCI_HOST_BRIDGE_INSTANCE; - -#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \ - CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE) - -// -// HostBridge Resource Allocation interface -// - -/** - These are the notifications from the PCI bus driver that it is about to enter a certain - phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform specific actions, - including any chipset-specific initialization, so that the chipset is ready to enter the next phase. - Eight notification points are defined at this time. See belows: - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data - structures. The PCI enumerator should issue this notification - before starting a fresh enumeration process. Enumeration cannot - be restarted after sending any other notification such as - EfiPciHostBridgeBeginBusAllocation. - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is - required here. This notification can be used to perform any - chipset-specific programming. - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No - specific action is required here. This notification can be used to - perform any chipset-specific programming. - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about to begin. No specific - action is required here. This notification can be used to perform - any chipset-specific programming. - EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI - root bridges. These resource settings are returned on the next call to - GetProposedResources(). Before calling NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible - for gathering I/O and memory requests for - all the PCI root bridges and submitting these requests using - SubmitResources(). This function pads the resource amount - to suit the root bridge hardware, takes care of dependencies between - the PCI root bridges, and calls the Global Coherency Domain (GCD) - with the allocation request. In the case of padding, the allocated range - could be bigger than what was requested. - EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated - resources (proposed resources) for all the PCI root bridges. After the - hardware is programmed, reassigning resources will not be supported. - The bus settings are not affected. - EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI - root bridges and resets the I/O and memory apertures to their initial - state. The bus settings are not affected. If the request to allocate - resources fails, the PCI enumerator can use this notification to - deallocate previous resources, adjust the requests, and retry - allocation. - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is - required here. This notification can be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error - is valid for a Phase of EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one or more - PCI root bridges before this call - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid - for a Phase of EfiPciHostBridgeSetResources. - @retval EFI_INVALID_PARAMETER Invalid phase parameter - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the - previously submitted resource requests cannot be fulfilled or - were only partially fulfilled. - @retval EFI_SUCCESS The notification was accepted without any errors. - -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ); - -/** - Return the device handle of the next PCI root bridge that is associated with this Host Bridge. - - This function is called multiple times to retrieve the device handles of all the PCI root bridges that - are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI - root bridges. On each call, the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next PCI root bridge. The - caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - for that root bridge. When there are no more PCI root bridges to report, the interface returns - EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they - are returned by this function. - For D945 implementation, there is only one root bridge in PCI host bridge. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ); - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary - from one PCI root bridge to another. These attributes are different from the decode-related - attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device - handles of all the root bridges that are associated with this host bridge must be obtained by calling - GetNextRootBridge(). The attributes are static in the sense that they do not change during or - after the enumeration process. The hardware may provide mechanisms to change the attributes on - the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is - installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine multiple resource requests. - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to - include requests for the prefetchable memory in the nonprefetchable memory pool and not request any - prefetchable memory. - Attribute Description - ------------------------------------ ---------------------------------------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate - windows for nonprefetchable and prefetchable memory. A PCI bus - driver needs to include requests for prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory - windows. If this bit is not set, the PCI bus driver needs to include - requests for a 64-bit memory address in the corresponding 32-bit - memory pool. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type - EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Attributes The pointer to attribte of root bridge, it is output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - @retval EFI_SUCCESS Success to get attribute of interested root bridge. - -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ); - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns the PCI bus range - over which the search should be performed in ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. - -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI bus range. - - This member function programs the specified PCI root bridge to decode the bus range that is - specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than - bus descriptors. - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors. - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed. - -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Submits the I/O and memory resource requirements for the specified PCI root bridge. - - This function is used to submit all the I/O and memory resources that are required by the specified - PCI root bridge. The input parameter Configuration is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted. - @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are - not supported by this PCI root bridge. This error will happen if the caller - did not combine resources according to Attributes that were returned by - GetAllocAttributes(). - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge. - -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the specified PCI root bridge. The - proposed resource settings are prepared when NotifyPhase() is called with a Phase of - EfiPciHostBridgeAllocateResources. The output parameter Configuration - specifies the following: - - The various types of resources, excluding bus resources, that are allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various - stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual - PCI controllers before enumeration. - - This function is called during the PCI enumeration process. No specific action is expected from this - member function. It allows the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 Specification. - @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI - configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for - the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should - not enumerate this device, including its child devices if it is a PCI-to-PCI - bridge. - -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ); - - -// -// Define resource status constant -// -#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL -#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL - - -// -// Driver Instance Data Prototypes -// - -typedef struct { - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation; - UINTN NumberOfBytes; - UINTN NumberOfPages; - EFI_PHYSICAL_ADDRESS HostAddress; - EFI_PHYSICAL_ADDRESS MappedHostAddress; -} MAP_INFO; - -typedef struct { - ACPI_HID_DEVICE_PATH AcpiDevicePath; - EFI_DEVICE_PATH_PROTOCOL EndDevicePath; -} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; - -typedef struct { - UINT64 BusBase; - UINT64 BusLimit; - - UINT64 MemBase; - UINT64 MemLimit; - - UINT64 IoBase; - UINT64 IoLimit; -} PCI_ROOT_BRIDGE_RESOURCE_APERTURE; - -typedef enum { - TypeIo = 0, - TypeMem32, - TypePMem32, - TypeMem64, - TypePMem64, - TypeBus, - TypeMax -} PCI_RESOURCE_TYPE; - -typedef enum { - ResNone = 0, - ResSubmitted, - ResRequested, - ResAllocated, - ResStatusMax -} RES_STATUS; - -typedef struct { - PCI_RESOURCE_TYPE Type; - UINT64 Base; - UINT64 Length; - UINT64 Alignment; - RES_STATUS Status; -} PCI_RES_NODE; - -#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b') - -typedef struct { - UINT32 Signature; - LIST_ENTRY Link; - EFI_HANDLE Handle; - UINT64 RootBridgeAttrib; - UINT64 Attributes; - UINT64 Supports; - - // - // Specific for this memory controller: Bus, I/O, Mem - // - PCI_RES_NODE ResAllocNode[6]; - - // - // Addressing for Memory and I/O and Bus arrange - // - UINT64 BusBase; - UINT64 MemBase; - UINT64 IoBase; - UINT64 BusLimit; - UINT64 MemLimit; - UINT64 IoLimit; - -//UINTN PciAddress; -//UINTN PciData; - - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io; - -} PCI_ROOT_BRIDGE_INSTANCE; - - -// -// Driver Instance Data Macros -// -#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE) - - -#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE) - -/** - - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - @param HostBridgeHandle Handle of host bridge - @param Attri Attribute of host bridge - @param ResAperture ResourceAperture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. - -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture - ); - -#endif diff --git a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf b/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf deleted file mode 100644 index c5fe0fa61aac..000000000000 --- a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf +++ /dev/null @@ -1,54 +0,0 @@ -## @file -# -# Component description file a sinngle segment PCI Host Bridge driver. -# -# Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -## - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = PciHostBridge - FILE_GUID = 2383608E-C6D0-4e3e-858D-45DFAC3543D5 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = InitializePciHostBridge - -[Packages] - MdePkg/MdePkg.dec - -[LibraryClasses] - UefiDriverEntryPoint - UefiBootServicesTableLib - DxeServicesTableLib - UefiLib - MemoryAllocationLib - BaseMemoryLib - BaseLib - DebugLib - DevicePathLib - IoLib - PciLib - -[Sources] - PciHostBridge.c - PciRootBridgeIo.c - PciHostBridge.h - -[Protocols] - gEfiPciHostBridgeResourceAllocationProtocolGuid - gEfiPciRootBridgeIoProtocolGuid - gEfiMetronomeArchProtocolGuid - gEfiDevicePathProtocolGuid - -[depex] - gEfiMetronomeArchProtocolGuid - diff --git a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c deleted file mode 100644 index 4ac89fb7548f..000000000000 --- a/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c +++ /dev/null @@ -1,2150 +0,0 @@ -/** @file - PCI Root Bridge Io Protocol implementation - -Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.
-This program and the accompanying materials are -licensed and made available under the terms and conditions of the BSD License -which accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "PciHostBridge.h" -#include - -typedef struct { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax]; - EFI_ACPI_END_TAG_DESCRIPTOR EndDesp; -} RESOURCE_CONFIGURATION; - -RESOURCE_CONFIGURATION Configuration = { - { - // TypeIo: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_IO, 0, 0, 0, 0xEFFF0000, 0xEFFFFFFF, 0, 0}, - - // TypeMem32: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_MEM, 0, 0, 32, 0x40000000, 0x5FFFFFFF, 0, 0}, - - // TypePMem32: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_MEM, 0, 6, 32, 0x40000000, 0x5FFFFFFF, 0, 0}, - - // TypeMem64: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_MEM, 0, 0, 64, 0x40000000, 0x5FFFFFFF, 0, 0}, - - // TypePMem64: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_MEM, 0, 6, 64, 0x40000000, 0x5FFFFFFF, 0, 0}, - - // TypeBus: - {ACPI_ADDRESS_SPACE_DESCRIPTOR, sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR), - ACPI_ADDRESS_SPACE_TYPE_BUS, 0, 0, 0, 0, 255, 0, 0} - }, - {ACPI_END_TAG_DESCRIPTOR, 0} -}; - -// -// Protocol Member Function Prototypes -// - -/** - Polls an address in memory mapped I/O space until an exit condition is met, or - a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI memory read - operation is performed at the PCI memory address specified by Address for the width specified - by Width. The result of this PCI memory read operation is stored in Result. This PCI memory - read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result & - Mask) is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the memory operations. The caller is - responsible for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the memory address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is - satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is - performed at the PCI I/O address specified by Address for the width specified by Width. - The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is - repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal - to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the I/O operations. - @param[in] Address The base address of the I/O operations. The caller is responsible - for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the I/O address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - OUT VOID *UserBuffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[in] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN VOID *UserBuffer - ); - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI - root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory - space to another region of PCI root bridge memory space. This is especially useful for video scroll - operation on a memory mapped video buffer. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] DestAddress The destination address of the memory operation. The caller is - responsible for aligning the DestAddress if required. - @param[in] SrcAddress The source address of the memory operation. The caller is - responsible for aligning the SrcAddress if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at DestAddress and SrcAddress. - - @retval EFI_SUCCESS The data was copied from one memory region to another memory region. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Provides the PCI controller-specific addresses required to access system memory from a - DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to access system - memory. This function is used to map system memory for PCI bus master DMA accesses. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Operation Indicates if the bus master is going to read or write to system memory. - @param[in] HostAddress The system memory address to map to the PCI controller. - @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped. - @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use - to access the system memory's HostAddress. - @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Operation is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - @retval EFI_INVALID_PARAMETER Mapping is NULL. - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. - @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ); - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). - @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ); - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or - EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Type This parameter is not used and must be ignored. - @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData. - @param Pages The number of pages to allocate. - @param HostAddress A pointer to store the base system memory address of the allocated range. - @param Attributes The requested bit mask of attributes for the allocated range. Only - the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED, - and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ); - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Pages The number of pages to free. - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages - was not allocated with AllocateBuffer(). - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ); - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system memory. - - The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system - memory. Posted write transactions are generated by PCI bus masters when they perform write - transactions to target addresses in system memory. - This function does not flush posted write transactions from any PCI bridges. A PCI controller - specific action must be taken to guarantee that the posted write transactions have been flushed from - the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with - a PCI read transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host - bridge to system memory. - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI - host bridge due to a hardware error. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ); - -/** - Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the - attributes that a PCI root bridge is currently using. - - The GetAttributes() function returns the mask of attributes that this PCI root bridge supports - and the mask of attributes that the PCI root bridge is currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Supported A pointer to the mask of attributes that this PCI root bridge - supports setting with SetAttributes(). - @param Attributes A pointer to the mask of attributes that this PCI root bridge is - currently using. - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root - bridge supports is returned in Supports. If Attributes is - not NULL, then the attributes that the PCI root bridge is currently - using is returned in Attributes. - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ); - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for the PCI root - bridge on the resource range specified by ResourceBase and ResourceLength. Since the - granularity of setting these attributes may vary from resource type to resource type, and from - platform to platform, the actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a larger resource range - than the caller requested. The actual range is returned in ResourceBase and - ResourceLength. The caller is responsible for verifying that the actual range for which the - attributes were set is acceptable. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Attributes The mask of attributes to set. If the attribute bit - MEMORY_WRITE_COMBINE, MEMORY_CACHED, or - MEMORY_DISABLE is set, then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then ResourceBase and - ResourceLength are ignored, and may be NULL. - @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified - by the attributes specified by Attributes. - @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the - attributes specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ); - -/** - Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0 - resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that may be used to - describe the current resources allocated to a PCI root bridge. These are the QWORD Address - Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The - QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic - or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD - Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the - current configuration of this PCI root bridge. The storage for the - ACPI 2.0 resource descriptors is allocated by this function. The - caller must treat the return buffer as read-only data, and the buffer - must not be freed by the caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ); - -// -// Memory Controller Pci Root Bridge Io Module Variables -// -EFI_METRONOME_ARCH_PROTOCOL *mMetronome; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mInStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 0, // EfiPciWidthFifoUint8 - 0, // EfiPciWidthFifoUint16 - 0, // EfiPciWidthFifoUint32 - 0, // EfiPciWidthFifoUint64 - 1, // EfiPciWidthFillUint8 - 2, // EfiPciWidthFillUint16 - 4, // EfiPciWidthFillUint32 - 8 // EfiPciWidthFillUint64 -}; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mOutStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 1, // EfiPciWidthFifoUint8 - 2, // EfiPciWidthFifoUint16 - 4, // EfiPciWidthFifoUint32 - 8, // EfiPciWidthFifoUint64 - 0, // EfiPciWidthFillUint8 - 0, // EfiPciWidthFillUint16 - 0, // EfiPciWidthFillUint32 - 0 // EfiPciWidthFillUint64 -}; - -/** - - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - @param HostBridgeHandle Handle of host bridge - @param Attri Attribute of host bridge - @param ResAperture ResourceAperture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. - -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture - ) -{ - EFI_STATUS Status; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - PCI_RESOURCE_TYPE Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol); - - // - // The host to pci bridge, the host memory and io addresses are - // direct mapped to pci addresses, so no need translate, set bases to 0. - // - PrivateData->MemBase = ResAperture->MemBase; - PrivateData->IoBase = ResAperture->IoBase; - - // - // The host bridge only supports 32bit addressing for memory - // and standard IA32 16bit io - // - PrivateData->MemLimit = ResAperture->MemLimit; - PrivateData->IoLimit = ResAperture->IoLimit; - - // - // Bus Appeture for this Root Bridge (Possible Range) - // - PrivateData->BusBase = ResAperture->BusBase; - PrivateData->BusLimit = ResAperture->BusLimit; - - // - // Specific for this chipset - // - for (Index = TypeIo; Index < TypeMax; Index++) { - PrivateData->ResAllocNode[Index].Type = Index; - PrivateData->ResAllocNode[Index].Base = 0; - PrivateData->ResAllocNode[Index].Length = 0; - PrivateData->ResAllocNode[Index].Status = ResNone; - } - -//PrivateData->PciAddress = 0xCF8; -//PrivateData->PciData = 0xCFC; - - PrivateData->RootBridgeAttrib = Attri; - - PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \ - EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \ - EFI_PCI_ATTRIBUTE_VGA_MEMORY | \ - EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16; - PrivateData->Attributes = PrivateData->Supports; - - Protocol->ParentHandle = HostBridgeHandle; - - Protocol->PollMem = RootBridgeIoPollMem; - Protocol->PollIo = RootBridgeIoPollIo; - - Protocol->Mem.Read = RootBridgeIoMemRead; - Protocol->Mem.Write = RootBridgeIoMemWrite; - - Protocol->Io.Read = RootBridgeIoIoRead; - Protocol->Io.Write = RootBridgeIoIoWrite; - - Protocol->CopyMem = RootBridgeIoCopyMem; - - Protocol->Pci.Read = RootBridgeIoPciRead; - Protocol->Pci.Write = RootBridgeIoPciWrite; - - Protocol->Map = RootBridgeIoMap; - Protocol->Unmap = RootBridgeIoUnmap; - - Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer; - Protocol->FreeBuffer = RootBridgeIoFreeBuffer; - - Protocol->Flush = RootBridgeIoFlush; - - Protocol->GetAttributes = RootBridgeIoGetAttributes; - Protocol->SetAttributes = RootBridgeIoSetAttributes; - - Protocol->Configuration = RootBridgeIoConfiguration; - - Protocol->SegmentNumber = 0; - - Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome); - ASSERT_EFI_ERROR (Status); - - return EFI_SUCCESS; -} - -/** - Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO. - - The I/O operations are carried out exactly as requested. The caller is responsible - for satisfying any alignment and I/O width restrictions that a PI System on a - platform might require. For example on some platforms, width requests of - EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will - be handled by the driver. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] OperationType I/O operation type: IO/MMIO/PCI. - @param[in] Width Signifies the width of the I/O or Memory operation. - @param[in] Address The base address of the I/O operation. - @param[in] Count The number of I/O operations to perform. The number of - bytes moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. - For write operations, the source buffer from which to write data. - - @retval EFI_SUCCESS The parameters for this request pass the checks. - @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. - @retval EFI_UNSUPPORTED The address range specified by Address, Width, - and Count is not valid for this PI system. - -**/ -EFI_STATUS -RootBridgeIoCheckParameter ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN OPERATION_TYPE OperationType, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; - UINT64 MaxCount; - UINT64 Base; - UINT64 Limit; - - // - // Check to see if Buffer is NULL - // - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Width is in the valid range - // - if ((UINT32)Width >= EfiPciWidthMaximum) { - return EFI_INVALID_PARAMETER; - } - - // - // For FIFO type, the target address won't increase during the access, - // so treat Count as 1 - // - if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { - Count = 1; - } - - // - // Check to see if Width is in the valid range for I/O Port operations - // - Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) { - ASSERT (FALSE); - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Address is aligned - // - if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) { - return EFI_UNSUPPORTED; - } - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - // - // Check to see if any address associated with this transfer exceeds the maximum - // allowed address. The maximum address implied by the parameters passed in is - // Address + Size * Count. If the following condition is met, then the transfer - // is not supported. - // - // Address + Size * Count > Limit + 1 - // - // Since Limit can be the maximum integer value supported by the CPU and Count - // can also be the maximum integer value supported by the CPU, this range - // check must be adjusted to avoid all oveflow conditions. - // - // The following form of the range check is equivalent but assumes that - // Limit is of the form (2^n - 1). - // - if (OperationType == IoOperation) { - Base = PrivateData->IoBase; - Limit = PrivateData->IoLimit; - } else if (OperationType == MemOperation) { - Base = PrivateData->MemBase; - Limit = PrivateData->MemLimit; - } else { - PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; - if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->ExtendedRegister != 0) { - Address = PciRbAddr->ExtendedRegister; - } else { - Address = PciRbAddr->Register; - } - Base = 0; - Limit = MAX_PCI_REG_ADDRESS; - } - - if (Address < Base) { - return EFI_INVALID_PARAMETER; - } - - if (Count == 0) { - if (Address > Limit) { - return EFI_UNSUPPORTED; - } - } else { - MaxCount = RShiftU64 (Limit, Width); - if (MaxCount < (Count - 1)) { - return EFI_UNSUPPORTED; - } - if (Address > LShiftU64 (MaxCount - Count + 1, Width)) { - return EFI_UNSUPPORTED; - } - } - - return EFI_SUCCESS; -} - -/** - Internal help function for read and write memory space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Write Switch value for Read or Write. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -RootBridgeIoMemRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - - Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - MmioWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - case EfiPciWidthUint64: - MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = MmioRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); - break; - case EfiPciWidthUint64: - *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - -/** - Internal help function for read and write IO space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Write Switch value for Read or Write. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -RootBridgeIoIoRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - - Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - IoWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - IoWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - IoWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = IoRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = IoRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = IoRead32 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - -/** - Internal help function for read and write PCI configuration space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Write Switch value for Read or Write. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -RootBridgeIoPciRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; - UINTN PcieRegAddr; - - Status = RootBridgeIoCheckParameter (This, PciOperation, Width, Address, Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; - - PcieRegAddr = (UINTN) PCI_LIB_ADDRESS ( - PciRbAddr->Bus, - PciRbAddr->Device, - PciRbAddr->Function, - (PciRbAddr->ExtendedRegister != 0) ? \ - PciRbAddr->ExtendedRegister : - PciRbAddr->Register - ); - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; Count > 0; PcieRegAddr += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - PciWrite8 (PcieRegAddr, *Uint8Buffer); - break; - case EfiPciWidthUint16: - PciWrite16 (PcieRegAddr, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - PciWrite32 (PcieRegAddr, *((UINT32 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = PciRead8 (PcieRegAddr); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = PciRead16 (PcieRegAddr); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = PciRead32 (PcieRegAddr); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - - return EFI_SUCCESS; -} - -/** - Polls an address in memory mapped I/O space until an exit condition is met, or - a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI memory read - operation is performed at the PCI memory address specified by Address for the width specified - by Width. The result of this PCI memory read operation is stored in Result. This PCI memory - read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result & - Mask) is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the memory operations. The caller is - responsible for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the memory address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - // - // No matter what, always do a single poll. - // - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_SUCCESS; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome - // protocol definition is updated. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is - satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is - performed at the PCI I/O address specified by Address for the width specified by Width. - The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is - repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal - to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the I/O operations. - @param[in] Address The base address of the I/O operations. The caller is responsible - for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the I/O address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - // - // No matter what, always do a single poll. - // - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_SUCCESS; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI - root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory - space to another region of PCI root bridge memory space. This is especially useful for video scroll - operation on a memory mapped video buffer. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] DestAddress The destination address of the memory operation. The caller is - responsible for aligning the DestAddress if required. - @param[in] SrcAddress The source address of the memory operation. The caller is - responsible for aligning the SrcAddress if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at DestAddress and SrcAddress. - - @retval EFI_SUCCESS The data was copied from one memory region to another memory region. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ) -{ - EFI_STATUS Status; - BOOLEAN Direction; - UINTN Stride; - UINTN Index; - UINT64 Result; - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - if (DestAddress == SrcAddress) { - return EFI_SUCCESS; - } - - Stride = (UINTN)(1 << Width); - - Direction = TRUE; - if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) { - Direction = FALSE; - SrcAddress = SrcAddress + (Count-1) * Stride; - DestAddress = DestAddress + (Count-1) * Stride; - } - - for (Index = 0;Index < Count;Index++) { - Status = RootBridgeIoMemRead ( - This, - Width, - SrcAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - Status = RootBridgeIoMemWrite ( - This, - Width, - DestAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - if (Direction) { - SrcAddress += Stride; - DestAddress += Stride; - } else { - SrcAddress -= Stride; - DestAddress -= Stride; - } - } - return EFI_SUCCESS; -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Provides the PCI controller-specific addresses required to access system memory from a - DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to access system - memory. This function is used to map system memory for PCI bus master DMA accesses. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Operation Indicates if the bus master is going to read or write to system memory. - @param[in] HostAddress The system memory address to map to the PCI controller. - @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped. - @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use - to access the system memory's HostAddress. - @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Operation is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - @retval EFI_INVALID_PARAMETER Mapping is NULL. - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. - @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ) -{ - EFI_STATUS Status; - EFI_PHYSICAL_ADDRESS PhysicalAddress; - MAP_INFO *MapInfo; - -DEBUG((EFI_D_ERROR, "RootBridgeIoMap() - %d\n", __LINE__)); - if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Initialize the return values to their defaults - // - *Mapping = NULL; - - // - // Make sure that Operation is valid - // - if ((UINT32)Operation >= EfiPciOperationMaximum) { - return EFI_INVALID_PARAMETER; - } - - // - // Most PCAT like chipsets can not handle performing DMA above 4GB. - // If any part of the DMA transfer being mapped is above 4GB, then - // map the DMA transfer to a buffer below 4GB. - // - PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress; - if ((PhysicalAddress + *NumberOfBytes) > 0x100000000ULL) { - - // - // Common Buffer operations can not be remapped. If the common buffer - // if above 4GB, then it is not possible to generate a mapping, so return - // an error. - // - if (Operation == EfiPciOperationBusMasterCommonBuffer || Operation == EfiPciOperationBusMasterCommonBuffer64) { - return EFI_UNSUPPORTED; - } - - // - // Allocate a MAP_INFO structure to remember the mapping when Unmap() is - // called later. - // - Status = gBS->AllocatePool ( - EfiBootServicesData, - sizeof(MAP_INFO), - (VOID **)&MapInfo - ); - if (EFI_ERROR (Status)) { - *NumberOfBytes = 0; - return Status; - } - - // - // Return a pointer to the MAP_INFO structure in Mapping - // - *Mapping = MapInfo; - - // - // Initialize the MAP_INFO structure - // - MapInfo->Operation = Operation; - MapInfo->NumberOfBytes = *NumberOfBytes; - MapInfo->NumberOfPages = EFI_SIZE_TO_PAGES(*NumberOfBytes); - MapInfo->HostAddress = PhysicalAddress; - MapInfo->MappedHostAddress = 0x00000000ffffffff; - - // - // Allocate a buffer below 4GB to map the transfer to. - // - Status = gBS->AllocatePages ( - AllocateMaxAddress, - EfiBootServicesData, - MapInfo->NumberOfPages, - &MapInfo->MappedHostAddress - ); - if (EFI_ERROR (Status)) { - gBS->FreePool (MapInfo); - *NumberOfBytes = 0; - return Status; - } - - // - // If this is a read operation from the Bus Master's point of view, - // then copy the contents of the real buffer into the mapped buffer - // so the Bus Master can read the contents of the real buffer. - // - if (Operation == EfiPciOperationBusMasterRead || Operation == EfiPciOperationBusMasterRead64) { - CopyMem ( - (VOID *)(UINTN)MapInfo->MappedHostAddress, - (VOID *)(UINTN)MapInfo->HostAddress, - MapInfo->NumberOfBytes - ); - } - - // - // The DeviceAddress is the address of the maped buffer below 4GB - // - *DeviceAddress = MapInfo->MappedHostAddress; - } else { - // - // The transfer is below 4GB, so the DeviceAddress is simply the HostAddress - // - *DeviceAddress = PhysicalAddress; - } - - return EFI_SUCCESS; -} - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). - @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ) -{ - MAP_INFO *MapInfo; - -DEBUG((EFI_D_ERROR, "RootBridgeIoUnmap() - %d\n", __LINE__)); - // - // See if the Map() operation associated with this Unmap() required a mapping buffer. - // If a mapping buffer was not required, then this function simply returns EFI_SUCCESS. - // - if (Mapping != NULL) { - // - // Get the MAP_INFO structure from Mapping - // - MapInfo = (MAP_INFO *)Mapping; - - // - // If this is a write operation from the Bus Master's point of view, - // then copy the contents of the mapped buffer into the real buffer - // so the processor can read the contents of the real buffer. - // - if (MapInfo->Operation == EfiPciOperationBusMasterWrite || MapInfo->Operation == EfiPciOperationBusMasterWrite64) { - CopyMem ( - (VOID *)(UINTN)MapInfo->HostAddress, - (VOID *)(UINTN)MapInfo->MappedHostAddress, - MapInfo->NumberOfBytes - ); - } - - // - // Free the mapped buffer and the MAP_INFO structure. - // - gBS->FreePages (MapInfo->MappedHostAddress, MapInfo->NumberOfPages); - gBS->FreePool (Mapping); - } - return EFI_SUCCESS; -} - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or - EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Type This parameter is not used and must be ignored. - @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData. - @param Pages The number of pages to allocate. - @param HostAddress A pointer to store the base system memory address of the allocated range. - @param Attributes The requested bit mask of attributes for the allocated range. Only - the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED, - and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ) -{ - EFI_STATUS Status; - EFI_PHYSICAL_ADDRESS PhysicalAddress; - -DEBUG((EFI_D_ERROR, "RootBridgeIoAllocateBuffer() - %d\n", __LINE__)); - // - // Validate Attributes - // - if ((Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) != 0) { - return EFI_UNSUPPORTED; - } - - // - // Check for invalid inputs - // - if (HostAddress == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // The only valid memory types are EfiBootServicesData and EfiRuntimeServicesData - // - if (MemoryType != EfiBootServicesData && MemoryType != EfiRuntimeServicesData) { - return EFI_INVALID_PARAMETER; - } - - // - // Limit allocations to memory below 4GB - // - PhysicalAddress = (EFI_PHYSICAL_ADDRESS)(0xffffffff); - - Status = gBS->AllocatePages (AllocateMaxAddress, MemoryType, Pages, &PhysicalAddress); - if (EFI_ERROR (Status)) { - return Status; - } - - *HostAddress = (VOID *)(UINTN)PhysicalAddress; - - return EFI_SUCCESS; -} - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Pages The number of pages to free. - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages - was not allocated with AllocateBuffer(). - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ) -{ -DEBUG((EFI_D_ERROR, "RootBridgeIoFreeBuffer() - %d\n", __LINE__)); - return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress, Pages); -} - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system memory. - - The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system - memory. Posted write transactions are generated by PCI bus masters when they perform write - transactions to target addresses in system memory. - This function does not flush posted write transactions from any PCI bridges. A PCI controller - specific action must be taken to guarantee that the posted write transactions have been flushed from - the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with - a PCI read transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host - bridge to system memory. - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI - host bridge due to a hardware error. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ) -{ -DEBUG((EFI_D_ERROR, "RootBridgeIoFlush() - %d\n", __LINE__)); - // - // not supported yet - // - return EFI_SUCCESS; -} - -/** - Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the - attributes that a PCI root bridge is currently using. - - The GetAttributes() function returns the mask of attributes that this PCI root bridge supports - and the mask of attributes that the PCI root bridge is currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Supported A pointer to the mask of attributes that this PCI root bridge - supports setting with SetAttributes(). - @param Attributes A pointer to the mask of attributes that this PCI root bridge is - currently using. - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root - bridge supports is returned in Supports. If Attributes is - not NULL, then the attributes that the PCI root bridge is currently - using is returned in Attributes. - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes == NULL && Supported == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Set the return value for Supported and Attributes - // - if (Supported != NULL) { - *Supported = PrivateData->Supports; - } - - if (Attributes != NULL) { - *Attributes = PrivateData->Attributes; - } - - return EFI_SUCCESS; -} - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for the PCI root - bridge on the resource range specified by ResourceBase and ResourceLength. Since the - granularity of setting these attributes may vary from resource type to resource type, and from - platform to platform, the actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a larger resource range - than the caller requested. The actual range is returned in ResourceBase and - ResourceLength. The caller is responsible for verifying that the actual range for which the - attributes were set is acceptable. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Attributes The mask of attributes to set. If the attribute bit - MEMORY_WRITE_COMBINE, MEMORY_CACHED, or - MEMORY_DISABLE is set, then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then ResourceBase and - ResourceLength are ignored, and may be NULL. - @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified - by the attributes specified by Attributes. - @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the - attributes specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes != 0) { - if ((Attributes & (~(PrivateData->Supports))) != 0) { - return EFI_UNSUPPORTED; - } - } - - // - // This is a generic driver for a PC-AT class system. It does not have any - // chipset specific knowlegde, so none of the attributes can be set or - // cleared. Any attempt to set attribute that are already set will succeed, - // and any attempt to set an attribute that is not supported will fail. - // - if (Attributes & (~PrivateData->Attributes)) { - return EFI_UNSUPPORTED; - } - - return EFI_SUCCESS; -} - -/** - Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0 - resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that may be used to - describe the current resources allocated to a PCI root bridge. These are the QWORD Address - Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The - QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic - or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD - Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the - current configuration of this PCI root bridge. The storage for the - ACPI 2.0 resource descriptors is allocated by this function. The - caller must treat the return buffer as read-only data, and the buffer - must not be freed by the caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - UINTN Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - for (Index = 0; Index < TypeMax; Index++) { - if (PrivateData->ResAllocNode[Index].Status == ResAllocated) { - Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base; - Configuration.SpaceDesp[Index].AddrRangeMax = PrivateData->ResAllocNode[Index].Base + PrivateData->ResAllocNode[Index].Length - 1; - Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length; - } - } - - *Resources = &Configuration; - return EFI_SUCCESS; -} diff --git a/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.dsc b/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.dsc index c863413519a0..f9fdb5ce335c 100644 --- a/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.dsc +++ b/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.dsc @@ -117,9 +117,15 @@ DEFINE TRANS_CODE = $(EL3_TO_EL2) SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf # + # PCI support + # + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf + PciHostBridgeLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxPciHostBridgeLib/AmdStyxPciHostBridgeLib.inf + + # # Styx specific libraries # - PciLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxPciLib/AmdStyxPciLib.inf AmdSataInit|AmdModulePkg/Library/AmdSataInitLib/AmdSataInitLib.inf AmdStyxHelperLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxHelperLib/AmdStyxHelperLib.inf AmdStyxAcpiLib|OpenPlatformPkg/Platforms/AMD/Styx/AcpiTables/AcpiTables.inf @@ -604,14 +610,12 @@ DEFINE TRANS_CODE = $(EL3_TO_EL2) # OpenPlatformPkg/Platforms/AMD/Styx/Drivers/FdtDxe/FdtDxe.inf - # Required by PCI - UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf - # # PCI support # AmdModulePkg/Gionb/Gionb.inf - OpenPlatformPkg/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf + ArmPlatformPkg/Drivers/CpuIo2Dxe/ArmPciCpuIo2Dxe.inf + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf # diff --git a/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.fdf b/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.fdf index 6a50e2145e95..9668372c0228 100644 --- a/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.fdf +++ b/Platforms/AMD/Styx/HuskyBoard/HuskyBoard.fdf @@ -143,14 +143,12 @@ READ_LOCK_STATUS = TRUE SECTION RAW = OpenPlatformPkg/Platforms/AMD/Styx/FdtBlob/styx-husky.dtb } - # Required by PCI - INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf - # # PCI support # INF AmdModulePkg/Gionb/Gionb.inf - INF OpenPlatformPkg/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf + INF ArmPlatformPkg/Drivers/CpuIo2Dxe/ArmPciCpuIo2Dxe.inf + INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf # diff --git a/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc b/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc index eb8c9a4e27ee..20db518454a0 100644 --- a/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc +++ b/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc @@ -118,9 +118,15 @@ DEFINE TRANS_CODE = $(EL3_TO_EL2) SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf # + # PCI support + # + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf + PciHostBridgeLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxPciHostBridgeLib/AmdStyxPciHostBridgeLib.inf + + # # Styx specific libraries # - PciLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxPciLib/AmdStyxPciLib.inf AmdSataInit|AmdModulePkg/Library/AmdSataInitLib/AmdSataInitLib.inf AmdStyxHelperLib|OpenPlatformPkg/Platforms/AMD/Styx/Library/AmdStyxHelperLib/AmdStyxHelperLib.inf AmdStyxAcpiLib|OpenPlatformPkg/Platforms/AMD/Styx/AcpiTables/AcpiTables.inf @@ -614,14 +620,12 @@ DEFINE TRANS_CODE = $(EL3_TO_EL2) # OpenPlatformPkg/Platforms/AMD/Styx/Drivers/FdtDxe/FdtDxe.inf - # Required by PCI - UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf - # # PCI support # AmdModulePkg/Gionb/Gionb.inf - OpenPlatformPkg/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf + ArmPlatformPkg/Drivers/CpuIo2Dxe/ArmPciCpuIo2Dxe.inf + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf # diff --git a/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf b/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf index 898bf3ff5a3c..7677718b76da 100644 --- a/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf +++ b/Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf @@ -143,14 +143,12 @@ READ_LOCK_STATUS = TRUE SECTION RAW = OpenPlatformPkg/Platforms/AMD/Styx/FdtBlob/styx-overdrive.dtb } - # Required by PCI - INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf - # # PCI support # INF AmdModulePkg/Gionb/Gionb.inf - INF OpenPlatformPkg/Platforms/AMD/Styx/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf + INF ArmPlatformPkg/Drivers/CpuIo2Dxe/ArmPciCpuIo2Dxe.inf + INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf #