From patchwork Tue Oct 25 17:49:48 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Ard Biesheuvel X-Patchwork-Id: 79258 Delivered-To: patch@linaro.org Received: by 10.140.97.247 with SMTP id m110csp3244444qge; Tue, 25 Oct 2016 10:51:00 -0700 (PDT) X-Received: by 10.176.66.103 with SMTP id i94mr13367753uai.166.1477417860538; Tue, 25 Oct 2016 10:51:00 -0700 (PDT) Return-Path: Received: from lists.linaro.org (lists.linaro.org. [54.225.227.206]) by mx.google.com with ESMTP id 31si5878150uaz.51.2016.10.25.10.50.59; Tue, 25 Oct 2016 10:51:00 -0700 (PDT) Received-SPF: pass (google.com: domain of linaro-uefi-bounces@lists.linaro.org designates 54.225.227.206 as permitted sender) client-ip=54.225.227.206; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linaro-uefi-bounces@lists.linaro.org designates 54.225.227.206 as permitted sender) smtp.mailfrom=linaro-uefi-bounces@lists.linaro.org; dmarc=pass (p=NONE dis=NONE) header.from=linaro.org Received: by lists.linaro.org (Postfix, from userid 109) id 0E3F661771; Tue, 25 Oct 2016 17:50:58 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) by lists.linaro.org (Postfix) with ESMTP id 8AF3461771; Tue, 25 Oct 2016 17:50:58 +0000 (UTC) X-Original-To: linaro-uefi@lists.linaro.org Delivered-To: linaro-uefi@lists.linaro.org Received: by lists.linaro.org (Postfix, from userid 109) id 161F46176B; Tue, 25 Oct 2016 17:50:33 +0000 (UTC) Received: from mail-wm0-f48.google.com (mail-wm0-f48.google.com [74.125.82.48]) by lists.linaro.org (Postfix) with ESMTPS id 6342F6173B for ; Tue, 25 Oct 2016 17:50:32 +0000 (UTC) Received: by mail-wm0-f48.google.com with SMTP id c78so37819155wme.0 for ; Tue, 25 Oct 2016 10:50:32 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=OzBUwOniZfzDdNdXbaykC6N33JkXwjbWNIEZYNwSz0Y=; b=RB3c/pObytpx2W3Zpldj/zeewx/ob7f9IKOPBRMNY+Q5IqFPDyk8WFUyvE4NunyN3Q GhL3bp6QtGsv/46k6cN+HjXNO5EOwnCbdfiZ5G+yc1IbAJ5wGY/bDif72Nsc9L7pabLR 7avF4uelYAzZKQnmHXfc4iWX2zlAM66nN2zWGTPE5tePfyZjj+KDNdy0F8HJvcvQBgBu fWdKk0YdHR/Cn5iUpgZOSVABKvd2PVzrIQfIpvYwWTHHeBujBbm4K0Ba5pmDetQQg6Ye psVz5UfskOl4RuCmYqAGZXnwuDoAvjJyZGfGW+e2mAlKFwCIqhMFdl6v31rcYYVyQmsz Y08A== X-Gm-Message-State: ABUngvf1i0PGbgYtXszwI8JrmcQJwYjUyMA935ts+Tty4NTgbxAmd+reqwwt4zWOwMKlywjCXRI= X-Received: by 10.194.248.162 with SMTP id yn2mr15459257wjc.203.1477417828901; Tue, 25 Oct 2016 10:50:28 -0700 (PDT) Received: from localhost.localdomain ([105.129.136.43]) by smtp.gmail.com with ESMTPSA id h10sm26291555wje.48.2016.10.25.10.50.06 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 25 Oct 2016 10:50:27 -0700 (PDT) From: Ard Biesheuvel To: linaro-uefi@lists.linaro.org Date: Tue, 25 Oct 2016 18:49:48 +0100 Message-Id: <1477417788-20995-1-git-send-email-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Subject: [Linaro-uefi] [PATCH] Chips/TI Platforms/TI: drop BeagleBoard X-BeenThere: linaro-uefi@lists.linaro.org X-Mailman-Version: 2.1.16 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linaro-uefi-bounces@lists.linaro.org Sender: "Linaro-uefi" There is no longer a reason to keep a clone of the EDK2 version in OpenPlatformPkg, so remove it. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- Chips/TexasInstruments/Omap35xx/Contributions.txt | 218 --- Chips/TexasInstruments/Omap35xx/Flash/Flash.c | 774 ---------- Chips/TexasInstruments/Omap35xx/Flash/Flash.h | 106 -- Chips/TexasInstruments/Omap35xx/Flash/Flash.inf | 48 - Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c | 135 -- Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf | 45 - Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h | 90 -- Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h | 44 - Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h | 40 - Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h | 130 -- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h | 131 -- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h | 107 -- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h | 62 - Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h | 48 - Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h | 214 --- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h | 303 ---- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h | 165 --- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h | 82 -- Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h | 54 - Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h | 48 - Chips/TexasInstruments/Omap35xx/Include/TPS65950.h | 80 -- Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c | 357 ----- Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf | 54 - Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c | 445 ------ Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c | 400 ------ Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h | 157 -- Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf | 52 - Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c | 165 --- Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf | 46 - Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c | 72 - Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf | 48 - Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c | 102 -- Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf | 41 - Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf | 45 - Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c | 133 -- Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c | 176 --- Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf | 50 - Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c | 83 -- Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf | 37 - Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c | 297 ---- Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf | 38 - Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c | 90 -- Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf | 40 - Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c | 214 --- Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf | 44 - Chips/TexasInstruments/Omap35xx/License.txt | 26 - Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c | 1494 -------------------- Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h | 175 --- Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf | 54 - Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c | 677 --------- Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h | 44 - Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf | 53 - Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec | 58 - Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc | 188 --- Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c | 633 --------- Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h | 292 ---- Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf | 56 - Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c | 306 ---- Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c | 325 ----- Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf | 45 - Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c | 116 -- Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf | 48 - Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c | 376 ----- Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf | 57 - Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf | 65 - Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c | 242 ---- Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h | 66 - Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c | 150 -- Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec | 36 - Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc | 481 ------- Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf | 310 ---- Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat | 41 - Platforms/TexasInstruments/BeagleBoard/Contributions.txt | 218 --- Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc | 21 - Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh | 23 - Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf | Bin 7984 -> 0 bytes Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc | 67 - Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc | 23 - Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc | 194 --- Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc | 118 -- Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm | 211 --- Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm | 188 --- Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h | 179 --- Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c | 135 -- Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S | 37 - Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm | 48 - Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf | 54 - Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c | 84 -- Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c | 69 - Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c | 322 ----- Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c | 299 ---- Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf | 53 - Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c | 103 -- Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf | 41 - Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c | 165 --- Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf | 49 - Platforms/TexasInstruments/BeagleBoard/License.txt | 26 - Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile | 20 - Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c | 408 ------ Platforms/TexasInstruments/BeagleBoard/Tools/makefile | 22 - Platforms/TexasInstruments/BeagleBoard/Tools/replace.c | 146 -- Platforms/TexasInstruments/BeagleBoard/b.bat | 68 - Platforms/TexasInstruments/BeagleBoard/ba.bat | 68 - Platforms/TexasInstruments/BeagleBoard/build.sh | 150 -- Platforms/TexasInstruments/BeagleBoard/readme.txt | 78 - 105 files changed, 16211 deletions(-) diff --git a/Chips/TexasInstruments/Omap35xx/Contributions.txt b/Chips/TexasInstruments/Omap35xx/Contributions.txt deleted file mode 100644 index f87cbd73c693..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Contributions.txt +++ /dev/null @@ -1,218 +0,0 @@ - -====================== -= Code Contributions = -====================== - -To make a contribution to a TianoCore project, follow these steps. -1. Create a change description in the format specified below to - use in the source control commit log. -2. Your commit message must include your "Signed-off-by" signature, - and "Contributed-under" message. -3. Your "Contributed-under" message explicitly states that the - contribution is made under the terms of the specified - contribution agreement. Your "Contributed-under" message - must include the name of contribution agreement and version. - For example: Contributed-under: TianoCore Contribution Agreement 1.0 - The "TianoCore Contribution Agreement" is included below in - this document. -4. Submit your code to the TianoCore project using the process - that the project documents on its web page. If the process is - not documented, then submit the code on development email list - for the project. -5. It is preferred that contributions are submitted using the same - copyright license as the base project. When that is not possible, - then contributions using the following licenses can be accepted: - * BSD (2-clause): http://opensource.org/licenses/BSD-2-Clause - * BSD (3-clause): http://opensource.org/licenses/BSD-3-Clause - * MIT: http://opensource.org/licenses/MIT - * Python-2.0: http://opensource.org/licenses/Python-2.0 - * Zlib: http://opensource.org/licenses/Zlib - - Contributions of code put into the public domain can also be - accepted. - - Contributions using other licenses might be accepted, but further - review will be required. - -===================================================== -= Change Description / Commit Message / Patch Email = -===================================================== - -Your change description should use the standard format for a -commit message, and must include your "Signed-off-by" signature -and the "Contributed-under" message. - -== Sample Change Description / Commit Message = - -=== Start of sample patch email message === - -From: Contributor Name -Subject: [PATCH] CodeModule: Brief-single-line-summary - -Full-commit-message - -Contributed-under: TianoCore Contribution Agreement 1.0 -Signed-off-by: Contributor Name ---- - -An extra message for the patch email which will not be considered part -of the commit message can be added here. - -Patch content inline or attached - -=== End of sample patch email message === - -=== Notes for sample patch email === - -* The first line of commit message is taken from the email's subject - line following [PATCH]. The remaining portion of the commit message - is the email's content until the '---' line. -* git format-patch is one way to create this format - -=== Definitions for sample patch email === - -* "CodeModule" is a short idenfier for the affected code. For - example MdePkg, or MdeModulePkg UsbBusDxe. -* "Brief-single-line-summary" is a short summary of the change. -* The entire first line should be less than ~70 characters. -* "Full-commit-message" a verbose multiple line comment describing - the change. Each line should be less than ~70 characters. -* "Contributed-under" explicitely states that the contribution is - made under the terms of the contribtion agreement. This - agreement is included below in this document. -* "Signed-off-by" is the contributor's signature identifying them - by their real/legal name and their email address. - -======================================== -= TianoCore Contribution Agreement 1.0 = -======================================== - -INTEL CORPORATION ("INTEL") MAKES AVAILABLE SOFTWARE, DOCUMENTATION, -INFORMATION AND/OR OTHER MATERIALS FOR USE IN THE TIANOCORE OPEN SOURCE -PROJECT (COLLECTIVELY "CONTENT"). USE OF THE CONTENT IS GOVERNED BY THE -TERMS AND CONDITIONS OF THIS AGREEMENT BETWEEN YOU AND INTEL AND/OR THE -TERMS AND CONDITIONS OF LICENSE AGREEMENTS OR NOTICES INDICATED OR -REFERENCED BELOW. BY USING THE CONTENT, YOU AGREE THAT YOUR USE OF THE -CONTENT IS GOVERNED BY THIS AGREEMENT AND/OR THE TERMS AND CONDITIONS -OF ANY APPLICABLE LICENSE AGREEMENTS OR NOTICES INDICATED OR REFERENCED -BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS -AGREEMENT AND THE TERMS AND CONDITIONS OF ANY APPLICABLE LICENSE -AGREEMENTS OR NOTICES INDICATED OR REFERENCED BELOW, THEN YOU MAY NOT -USE THE CONTENT. - -Unless otherwise indicated, all Content made available on the TianoCore -site is provided to you under the terms and conditions of the BSD -License ("BSD"). A copy of the BSD License is available at -http://opensource.org/licenses/bsd-license.php -or when applicable, in the associated License.txt file. - -Certain other content may be made available under other licenses as -indicated in or with such Content. (For example, in a License.txt file.) - -You accept and agree to the following terms and conditions for Your -present and future Contributions submitted to TianoCore site. Except -for the license granted to Intel hereunder, You reserve all right, -title, and interest in and to Your Contributions. - -== SECTION 1: Definitions == -* "You" or "Contributor" shall mean the copyright owner or legal - entity authorized by the copyright owner that is making a - Contribution hereunder. All other entities that control, are - controlled by, or are under common control with that entity are - considered to be a single Contributor. For the purposes of this - definition, "control" means (i) the power, direct or indirect, to - cause the direction or management of such entity, whether by - contract or otherwise, or (ii) ownership of fifty percent (50%) - or more of the outstanding shares, or (iii) beneficial ownership - of such entity. -* "Contribution" shall mean any original work of authorship, - including any modifications or additions to an existing work, - that is intentionally submitted by You to the TinaoCore site for - inclusion in, or documentation of, any of the Content. For the - purposes of this definition, "submitted" means any form of - electronic, verbal, or written communication sent to the - TianoCore site or its representatives, including but not limited - to communication on electronic mailing lists, source code - control systems, and issue tracking systems that are managed by, - or on behalf of, the TianoCore site for the purpose of - discussing and improving the Content, but excluding - communication that is conspicuously marked or otherwise - designated in writing by You as "Not a Contribution." - -== SECTION 2: License for Contributions == -* Contributor hereby agrees that redistribution and use of the - Contribution in source and binary forms, with or without - modification, are permitted provided that the following - conditions are met: -** Redistributions of source code must retain the Contributor's - copyright notice, this list of conditions and the following - disclaimer. -** Redistributions in binary form must reproduce the Contributor's - copyright notice, this list of conditions and the following - disclaimer in the documentation and/or other materials provided - with the distribution. -* Disclaimer. None of the names of Contributor, Intel, or the names - of their respective contributors may be used to endorse or - promote products derived from this software without specific - prior written permission. -* Contributor grants a license (with the right to sublicense) under - claims of Contributor's patents that Contributor can license that - are infringed by the Contribution (as delivered by Contributor) to - make, use, distribute, sell, offer for sale, and import the - Contribution and derivative works thereof solely to the minimum - extent necessary for licensee to exercise the granted copyright - license; this patent license applies solely to those portions of - the Contribution that are unmodified. No hardware per se is - licensed. -* EXCEPT AS EXPRESSLY SET FORTH IN SECTION 3 BELOW, THE - CONTRIBUTION IS PROVIDED BY THE CONTRIBUTOR "AS IS" AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - CONTRIBUTOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE - CONTRIBUTION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - DAMAGE. - -== SECTION 3: Representations == -* You represent that You are legally entitled to grant the above - license. If your employer(s) has rights to intellectual property - that You create that includes Your Contributions, You represent - that You have received permission to make Contributions on behalf - of that employer, that Your employer has waived such rights for - Your Contributions. -* You represent that each of Your Contributions is Your original - creation (see Section 4 for submissions on behalf of others). - You represent that Your Contribution submissions include complete - details of any third-party license or other restriction - (including, but not limited to, related patents and trademarks) - of which You are personally aware and which are associated with - any part of Your Contributions. - -== SECTION 4: Third Party Contributions == -* Should You wish to submit work that is not Your original creation, - You may submit it to TianoCore site separately from any - Contribution, identifying the complete details of its source - and of any license or other restriction (including, but not - limited to, related patents, trademarks, and license agreements) - of which You are personally aware, and conspicuously marking the - work as "Submitted on behalf of a third-party: [named here]". - -== SECTION 5: Miscellaneous == -* Applicable Laws. Any claims arising under or relating to this - Agreement shall be governed by the internal substantive laws of - the State of Delaware or federal courts located in Delaware, - without regard to principles of conflict of laws. -* Language. This Agreement is in the English language only, which - language shall be controlling in all respects, and all versions - of this Agreement in any other language shall be for accommodation - only and shall not be binding. All communications and notices made - or given pursuant to this Agreement, and all documentation and - support to be provided, unless otherwise noted, shall be in the - English language. - diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.c b/Chips/TexasInstruments/Omap35xx/Flash/Flash.c deleted file mode 100644 index b8de109d87b4..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.c +++ /dev/null @@ -1,774 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "Flash.h" - -NAND_PART_INFO_TABLE gNandPartInfoTable[1] = { - { 0x2C, 0xBA, 17, 11 } -}; - -NAND_FLASH_INFO *gNandFlashInfo = NULL; -UINT8 *gEccCode; -UINTN gNum512BytesChunks = 0; - -// - -// Device path for SemiHosting. It contains our autogened Caller ID GUID. - -// - -typedef struct { - - VENDOR_DEVICE_PATH Guid; - - EFI_DEVICE_PATH_PROTOCOL End; - -} FLASH_DEVICE_PATH; - - - -FLASH_DEVICE_PATH gDevicePath = { - { - { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, { sizeof (VENDOR_DEVICE_PATH), 0 } }, - EFI_CALLER_ID_GUID - }, - { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} } -}; - - - -//Actual page address = Column address + Page address + Block address. -UINTN -GetActualPageAddressInBytes ( - UINTN BlockIndex, - UINTN PageIndex -) -{ - //BlockAddressStart = Start of the Block address in actual NAND - //PageAddressStart = Start of the Page address in actual NAND - return ((BlockIndex << gNandFlashInfo->BlockAddressStart) + (PageIndex << gNandFlashInfo->PageAddressStart)); -} - -VOID -NandSendCommand ( - UINT8 Command -) -{ - MmioWrite16(GPMC_NAND_COMMAND_0, Command); -} - -VOID -NandSendAddress ( - UINT8 Address -) -{ - MmioWrite16(GPMC_NAND_ADDRESS_0, Address); -} - -UINT16 -NandReadStatus ( - VOID - ) -{ - //Send READ STATUS command - NandSendCommand(READ_STATUS_CMD); - - //Read status. - return MmioRead16(GPMC_NAND_DATA_0); -} - -VOID -NandSendAddressCycles ( - UINTN Address -) -{ - //Column address - NandSendAddress(Address & 0xff); - Address >>= 8; - - //Column address - NandSendAddress(Address & 0x07); - Address >>= 3; - - //Page and Block address - NandSendAddress(Address & 0xff); - Address >>= 8; - - //Block address - NandSendAddress(Address & 0xff); - Address >>= 8; - - //Block address - NandSendAddress(Address & 0x01); -} - -VOID -GpmcInit ( - VOID - ) -{ - //Enable Smart-idle mode. - MmioWrite32 (GPMC_SYSCONFIG, SMARTIDLEMODE); - - //Set IRQSTATUS and IRQENABLE to the reset value - MmioWrite32 (GPMC_IRQSTATUS, 0x0); - MmioWrite32 (GPMC_IRQENABLE, 0x0); - - //Disable GPMC timeout control. - MmioWrite32 (GPMC_TIMEOUT_CONTROL, TIMEOUTDISABLE); - - //Set WRITEPROTECT bit to enable write access. - MmioWrite32 (GPMC_CONFIG, WRITEPROTECT_HIGH); - - //NOTE: Following GPMC_CONFIGi_0 register settings are taken from u-boot memory dump. - MmioWrite32 (GPMC_CONFIG1_0, DEVICETYPE_NAND | DEVICESIZE_X16); - MmioWrite32 (GPMC_CONFIG2_0, CSRDOFFTIME | CSWROFFTIME); - MmioWrite32 (GPMC_CONFIG3_0, ADVRDOFFTIME | ADVWROFFTIME); - MmioWrite32 (GPMC_CONFIG4_0, OEONTIME | OEOFFTIME | WEONTIME | WEOFFTIME); - MmioWrite32 (GPMC_CONFIG5_0, RDCYCLETIME | WRCYCLETIME | RDACCESSTIME | PAGEBURSTACCESSTIME); - MmioWrite32 (GPMC_CONFIG6_0, WRACCESSTIME | WRDATAONADMUXBUS | CYCLE2CYCLEDELAY | CYCLE2CYCLESAMECSEN); - MmioWrite32 (GPMC_CONFIG7_0, MASKADDRESS_128MB | CSVALID | BASEADDRESS); -} - -EFI_STATUS -NandDetectPart ( - VOID -) -{ - UINT8 NandInfo = 0; - UINT8 PartInfo[5]; - UINTN Index; - BOOLEAN Found = FALSE; - - //Send READ ID command - NandSendCommand(READ_ID_CMD); - - //Send one address cycle. - NandSendAddress(0); - - //Read 5-bytes to idenfity code programmed into the NAND flash devices. - //BYTE 0 = Manufacture ID - //Byte 1 = Device ID - //Byte 2, 3, 4 = Nand part specific information (Page size, Block size etc) - for (Index = 0; Index < sizeof(PartInfo); Index++) { - PartInfo[Index] = MmioRead16(GPMC_NAND_DATA_0); - } - - //Check if the ManufactureId and DeviceId are part of the currently supported nand parts. - for (Index = 0; Index < sizeof(gNandPartInfoTable)/sizeof(NAND_PART_INFO_TABLE); Index++) { - if (gNandPartInfoTable[Index].ManufactureId == PartInfo[0] && gNandPartInfoTable[Index].DeviceId == PartInfo[1]) { - gNandFlashInfo->BlockAddressStart = gNandPartInfoTable[Index].BlockAddressStart; - gNandFlashInfo->PageAddressStart = gNandPartInfoTable[Index].PageAddressStart; - Found = TRUE; - break; - } - } - - if (Found == FALSE) { - DEBUG ((EFI_D_ERROR, "Nand part is not currently supported. Manufacture id: %x, Device id: %x\n", PartInfo[0], PartInfo[1])); - return EFI_NOT_FOUND; - } - - //Populate NAND_FLASH_INFO based on the result of READ ID command. - gNandFlashInfo->ManufactureId = PartInfo[0]; - gNandFlashInfo->DeviceId = PartInfo[1]; - NandInfo = PartInfo[3]; - - if (PAGE_SIZE(NandInfo) == PAGE_SIZE_2K_VAL) { - gNandFlashInfo->PageSize = PAGE_SIZE_2K; - } else { - DEBUG ((EFI_D_ERROR, "Unknown Page size.\n")); - return EFI_DEVICE_ERROR; - } - - if (SPARE_AREA_SIZE(NandInfo) == SPARE_AREA_SIZE_64B_VAL) { - gNandFlashInfo->SparePageSize = SPARE_AREA_SIZE_64B; - } else { - DEBUG ((EFI_D_ERROR, "Unknown Spare area size.\n")); - return EFI_DEVICE_ERROR; - } - - if (BLOCK_SIZE(NandInfo) == BLOCK_SIZE_128K_VAL) { - gNandFlashInfo->BlockSize = BLOCK_SIZE_128K; - } else { - DEBUG ((EFI_D_ERROR, "Unknown Block size.\n")); - return EFI_DEVICE_ERROR; - } - - if (ORGANIZATION(NandInfo) == ORGANIZATION_X8) { - gNandFlashInfo->Organization = 0; - } else if (ORGANIZATION(NandInfo) == ORGANIZATION_X16) { - gNandFlashInfo->Organization = 1; - } - - //Calculate total number of blocks. - gNandFlashInfo->NumPagesPerBlock = DivU64x32(gNandFlashInfo->BlockSize, gNandFlashInfo->PageSize); - - return EFI_SUCCESS; -} - -VOID -NandConfigureEcc ( - VOID - ) -{ - //Define ECC size 0 and size 1 to 512 bytes - MmioWrite32 (GPMC_ECC_SIZE_CONFIG, (ECCSIZE0_512BYTES | ECCSIZE1_512BYTES)); -} - -VOID -NandEnableEcc ( - VOID - ) -{ - //Clear all the ECC result registers and select ECC result register 1 - MmioWrite32 (GPMC_ECC_CONTROL, (ECCCLEAR | ECCPOINTER_REG1)); - - //Enable ECC engine on CS0 - MmioWrite32 (GPMC_ECC_CONFIG, (ECCENABLE | ECCCS_0 | ECC16B)); -} - -VOID -NandDisableEcc ( - VOID - ) -{ - //Turn off ECC engine. - MmioWrite32 (GPMC_ECC_CONFIG, ECCDISABLE); -} - -VOID -NandCalculateEcc ( - VOID - ) -{ - UINTN Index; - UINTN EccResultRegister; - UINTN EccResult; - - //Capture 32-bit ECC result for each 512-bytes chunk. - //In our case PageSize is 2K so read ECC1-ECC4 result registers and - //generate total of 12-bytes of ECC code for the particular page. - - EccResultRegister = GPMC_ECC1_RESULT; - - for (Index = 0; Index < gNum512BytesChunks; Index++) { - - EccResult = MmioRead32 (EccResultRegister); - - //Calculate ECC code from 32-bit ECC result value. - //NOTE: Following calculation is not part of TRM. We got this information - //from Beagleboard mailing list. - gEccCode[Index * 3] = EccResult & 0xFF; - gEccCode[(Index * 3) + 1] = (EccResult >> 16) & 0xFF; - gEccCode[(Index * 3) + 2] = (((EccResult >> 20) & 0xF0) | ((EccResult >> 8) & 0x0F)); - - //Point to next ECC result register. - EccResultRegister += 4; - } -} - -EFI_STATUS -NandReadPage ( - IN UINTN BlockIndex, - IN UINTN PageIndex, - OUT VOID *Buffer, - OUT UINT8 *SpareBuffer -) -{ - UINTN Address; - UINTN Index; - UINTN NumMainAreaWords = (gNandFlashInfo->PageSize/2); - UINTN NumSpareAreaWords = (gNandFlashInfo->SparePageSize/2); - UINT16 *MainAreaWordBuffer = Buffer; - UINT16 *SpareAreaWordBuffer = (UINT16 *)SpareBuffer; - UINTN Timeout = MAX_RETRY_COUNT; - - //Generate device address in bytes to access specific block and page index - Address = GetActualPageAddressInBytes(BlockIndex, PageIndex); - - //Send READ command - NandSendCommand(PAGE_READ_CMD); - - //Send 5 Address cycles to access specific device address - NandSendAddressCycles(Address); - - //Send READ CONFIRM command - NandSendCommand(PAGE_READ_CONFIRM_CMD); - - //Poll till device is busy. - while (Timeout) { - if ((NandReadStatus() & NAND_READY) == NAND_READY) { - break; - } - Timeout--; - } - - if (Timeout == 0) { - DEBUG ((EFI_D_ERROR, "Read page timed out.\n")); - return EFI_TIMEOUT; - } - - //Reissue READ command - NandSendCommand(PAGE_READ_CMD); - - //Enable ECC engine. - NandEnableEcc(); - - //Read data into the buffer. - for (Index = 0; Index < NumMainAreaWords; Index++) { - *MainAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0); - } - - //Read spare area into the buffer. - for (Index = 0; Index < NumSpareAreaWords; Index++) { - *SpareAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0); - } - - //Calculate ECC. - NandCalculateEcc(); - - //Turn off ECC engine. - NandDisableEcc(); - - //Perform ECC correction. - //Need to implement.. - - return EFI_SUCCESS; -} - -EFI_STATUS -NandWritePage ( - IN UINTN BlockIndex, - IN UINTN PageIndex, - OUT VOID *Buffer, - IN UINT8 *SpareBuffer -) -{ - UINTN Address; - UINT16 *MainAreaWordBuffer = Buffer; - UINT16 *SpareAreaWordBuffer = (UINT16 *)SpareBuffer; - UINTN Index; - UINTN NandStatus; - UINTN Timeout = MAX_RETRY_COUNT; - - //Generate device address in bytes to access specific block and page index - Address = GetActualPageAddressInBytes(BlockIndex, PageIndex); - - //Send SERIAL DATA INPUT command - NandSendCommand(PROGRAM_PAGE_CMD); - - //Send 5 Address cycles to access specific device address - NandSendAddressCycles(Address); - - //Enable ECC engine. - NandEnableEcc(); - - //Data input from Buffer - for (Index = 0; Index < (gNandFlashInfo->PageSize/2); Index++) { - MmioWrite16(GPMC_NAND_DATA_0, *MainAreaWordBuffer++); - - //After each write access, device has to wait to accept data. - //Currently we may not be programming proper timing parameters to - //the GPMC_CONFIGi_0 registers and we would need to figure that out. - //Without following delay, page programming fails. - gBS->Stall(1); - } - - //Calculate ECC. - NandCalculateEcc(); - - //Turn off ECC engine. - NandDisableEcc(); - - //Prepare Spare area buffer with ECC codes. - SetMem(SpareBuffer, gNandFlashInfo->SparePageSize, 0xFF); - CopyMem(&SpareBuffer[ECC_POSITION], gEccCode, gNum512BytesChunks * 3); - - //Program spare area with calculated ECC. - for (Index = 0; Index < (gNandFlashInfo->SparePageSize/2); Index++) { - MmioWrite16(GPMC_NAND_DATA_0, *SpareAreaWordBuffer++); - } - - //Send PROGRAM command - NandSendCommand(PROGRAM_PAGE_CONFIRM_CMD); - - //Poll till device is busy. - NandStatus = 0; - while (Timeout) { - NandStatus = NandReadStatus(); - if ((NandStatus & NAND_READY) == NAND_READY) { - break; - } - Timeout--; - } - - if (Timeout == 0) { - DEBUG ((EFI_D_ERROR, "Program page timed out.\n")); - return EFI_TIMEOUT; - } - - //Bit0 indicates Pass/Fail status - if (NandStatus & NAND_FAILURE) { - return EFI_DEVICE_ERROR; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -NandEraseBlock ( - IN UINTN BlockIndex -) -{ - UINTN Address; - UINTN NandStatus; - UINTN Timeout = MAX_RETRY_COUNT; - - //Generate device address in bytes to access specific block and page index - Address = GetActualPageAddressInBytes(BlockIndex, 0); - - //Send ERASE SETUP command - NandSendCommand(BLOCK_ERASE_CMD); - - //Send 3 address cycles to device to access Page address and Block address - Address >>= 11; //Ignore column addresses - - NandSendAddress(Address & 0xff); - Address >>= 8; - - NandSendAddress(Address & 0xff); - Address >>= 8; - - NandSendAddress(Address & 0xff); - - //Send ERASE CONFIRM command - NandSendCommand(BLOCK_ERASE_CONFIRM_CMD); - - //Poll till device is busy. - NandStatus = 0; - while (Timeout) { - NandStatus = NandReadStatus(); - if ((NandStatus & NAND_READY) == NAND_READY) { - break; - } - Timeout--; - gBS->Stall(1); - } - - if (Timeout == 0) { - DEBUG ((EFI_D_ERROR, "Erase block timed out for Block: %d.\n", BlockIndex)); - return EFI_TIMEOUT; - } - - //Bit0 indicates Pass/Fail status - if (NandStatus & NAND_FAILURE) { - return EFI_DEVICE_ERROR; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -NandReadBlock ( - IN UINTN StartBlockIndex, - IN UINTN EndBlockIndex, - OUT VOID *Buffer, - OUT VOID *SpareBuffer -) -{ - UINTN BlockIndex; - UINTN PageIndex; - EFI_STATUS Status = EFI_SUCCESS; - - for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) { - //For each block read number of pages - for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) { - Status = NandReadPage(BlockIndex, PageIndex, Buffer, SpareBuffer); - if (EFI_ERROR(Status)) { - return Status; - } - Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize); - } - } - - return Status; -} - -EFI_STATUS -NandWriteBlock ( - IN UINTN StartBlockIndex, - IN UINTN EndBlockIndex, - OUT VOID *Buffer, - OUT VOID *SpareBuffer - ) -{ - UINTN BlockIndex; - UINTN PageIndex; - EFI_STATUS Status = EFI_SUCCESS; - - for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) { - //Page programming. - for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) { - Status = NandWritePage(BlockIndex, PageIndex, Buffer, SpareBuffer); - if (EFI_ERROR(Status)) { - return Status; - } - Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize); - } - } - - return Status; -} - -EFI_STATUS -EFIAPI -NandFlashReset ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN BOOLEAN ExtendedVerification - ) -{ - UINTN BusyStall = 50; // microSeconds - UINTN ResetBusyTimeout = (1000000 / BusyStall); // 1 Second - - //Send RESET command to device. - NandSendCommand(RESET_CMD); - - //Wait for 1ms before we check status register. - gBS->Stall(1000); - - //Check BIT#5 & BIT#6 in Status register to make sure RESET is done. - while ((NandReadStatus() & NAND_RESET_STATUS) != NAND_RESET_STATUS) { - - //In case of extended verification, wait for extended amount of time - //to make sure device is reset. - if (ExtendedVerification) { - if (ResetBusyTimeout == 0) { - return EFI_DEVICE_ERROR; - } - - gBS->Stall(BusyStall); - ResetBusyTimeout--; - } - } - - return EFI_SUCCESS; -} - -EFI_STATUS -EFIAPI -NandFlashReadBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN EFI_LBA Lba, - IN UINTN BufferSize, - OUT VOID *Buffer - ) -{ - UINTN NumBlocks; - UINTN EndBlockIndex; - EFI_STATUS Status; - UINT8 *SpareBuffer = NULL; - - if (Buffer == NULL) { - Status = EFI_INVALID_PARAMETER; - goto exit; - } - - if (Lba > LAST_BLOCK) { - Status = EFI_INVALID_PARAMETER; - goto exit; - } - - if ((BufferSize % gNandFlashInfo->BlockSize) != 0) { - Status = EFI_BAD_BUFFER_SIZE; - goto exit; - } - - NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize); - EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1; - - SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize); - if (SpareBuffer == NULL) { - Status = EFI_OUT_OF_RESOURCES; - goto exit; - } - - //Read block - Status = NandReadBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Read block fails: %x\n", Status)); - goto exit; - } - -exit: - if (SpareBuffer != NULL) { - FreePool (SpareBuffer); - } - - return Status; -} - -EFI_STATUS -EFIAPI -NandFlashWriteBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN EFI_LBA Lba, - IN UINTN BufferSize, - IN VOID *Buffer - ) -{ - UINTN BlockIndex; - UINTN NumBlocks; - UINTN EndBlockIndex; - EFI_STATUS Status; - UINT8 *SpareBuffer = NULL; - - if (Buffer == NULL) { - Status = EFI_INVALID_PARAMETER; - goto exit; - } - - if (Lba > LAST_BLOCK) { - Status = EFI_INVALID_PARAMETER; - goto exit; - } - - if ((BufferSize % gNandFlashInfo->BlockSize) != 0) { - Status = EFI_BAD_BUFFER_SIZE; - goto exit; - } - - NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize); - EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1; - - SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize); - if (SpareBuffer == NULL) { - Status = EFI_OUT_OF_RESOURCES; - goto exit; - } - - // Erase block - for (BlockIndex = (UINTN)Lba; BlockIndex <= EndBlockIndex; BlockIndex++) { - Status = NandEraseBlock(BlockIndex); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Erase block failed. Status: %x\n", Status)); - goto exit; - } - } - - // Program data - Status = NandWriteBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Block write fails: %x\n", Status)); - goto exit; - } - -exit: - if (SpareBuffer != NULL) { - FreePool (SpareBuffer); - } - - return Status; -} - -EFI_STATUS -EFIAPI -NandFlashFlushBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This - ) -{ - return EFI_SUCCESS; -} - - - -EFI_BLOCK_IO_MEDIA gNandFlashMedia = { - SIGNATURE_32('n','a','n','d'), // MediaId - FALSE, // RemovableMedia - TRUE, // MediaPresent - FALSE, // LogicalPartition - FALSE, // ReadOnly - FALSE, // WriteCaching - 0, // BlockSize - 2, // IoAlign - 0, // Pad - 0 // LastBlock -}; - -EFI_BLOCK_IO_PROTOCOL BlockIo = -{ - EFI_BLOCK_IO_INTERFACE_REVISION, // Revision - &gNandFlashMedia, // *Media - NandFlashReset, // Reset - NandFlashReadBlocks, // ReadBlocks - NandFlashWriteBlocks, // WriteBlocks - NandFlashFlushBlocks // FlushBlocks -}; - -EFI_STATUS -NandFlashInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - gNandFlashInfo = (NAND_FLASH_INFO *)AllocateZeroPool (sizeof(NAND_FLASH_INFO)); - - //Initialize GPMC module. - GpmcInit(); - - //Reset NAND part - NandFlashReset(&BlockIo, FALSE); - - //Detect NAND part and populate gNandFlashInfo structure - Status = NandDetectPart (); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Nand part id detection failure: Status: %x\n", Status)); - return Status; - } - - //Count total number of 512Bytes chunk based on the page size. - if (gNandFlashInfo->PageSize == PAGE_SIZE_512B) { - gNum512BytesChunks = 1; - } else if (gNandFlashInfo->PageSize == PAGE_SIZE_2K) { - gNum512BytesChunks = 4; - } else if (gNandFlashInfo->PageSize == PAGE_SIZE_4K) { - gNum512BytesChunks = 8; - } - - gEccCode = (UINT8 *)AllocatePool(gNum512BytesChunks * 3); - if (gEccCode == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - //Configure ECC - NandConfigureEcc (); - - //Patch EFI_BLOCK_IO_MEDIA structure. - gNandFlashMedia.BlockSize = gNandFlashInfo->BlockSize; - gNandFlashMedia.LastBlock = LAST_BLOCK; - - //Publish BlockIO. - Status = gBS->InstallMultipleProtocolInterfaces ( - &ImageHandle, - &gEfiBlockIoProtocolGuid, &BlockIo, - &gEfiDevicePathProtocolGuid, &gDevicePath, - NULL - ); - return Status; -} - diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.h b/Chips/TexasInstruments/Omap35xx/Flash/Flash.h deleted file mode 100644 index 46ec4db9e183..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.h +++ /dev/null @@ -1,106 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef FLASH_H -#define FLASH_H - -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define PAGE_SIZE(x) ((x) & 0x01) -#define PAGE_SIZE_2K_VAL (0x01UL) - -#define SPARE_AREA_SIZE(x) (((x) >> 2) & 0x01) -#define SPARE_AREA_SIZE_64B_VAL (0x1UL) - -#define BLOCK_SIZE(x) (((x) >> 4) & 0x01) -#define BLOCK_SIZE_128K_VAL (0x01UL) - -#define ORGANIZATION(x) (((x) >> 6) & 0x01) -#define ORGANIZATION_X8 (0x0UL) -#define ORGANIZATION_X16 (0x1UL) - -#define PAGE_SIZE_512B (512) -#define PAGE_SIZE_2K (2048) -#define PAGE_SIZE_4K (4096) -#define SPARE_AREA_SIZE_16B (16) -#define SPARE_AREA_SIZE_64B (64) - -#define BLOCK_SIZE_16K (16*1024) -#define BLOCK_SIZE_128K (128*1024) - -#define BLOCK_COUNT (2048) -#define LAST_BLOCK (BLOCK_COUNT - 1) - -#define ECC_POSITION 2 - -//List of commands. -#define RESET_CMD 0xFF -#define READ_ID_CMD 0x90 - -#define READ_STATUS_CMD 0x70 - -#define PAGE_READ_CMD 0x00 -#define PAGE_READ_CONFIRM_CMD 0x30 - -#define BLOCK_ERASE_CMD 0x60 -#define BLOCK_ERASE_CONFIRM_CMD 0xD0 - -#define PROGRAM_PAGE_CMD 0x80 -#define PROGRAM_PAGE_CONFIRM_CMD 0x10 - -//Nand status register bit definition -#define NAND_SUCCESS (0x0UL << 0) -#define NAND_FAILURE BIT0 - -#define NAND_BUSY (0x0UL << 6) -#define NAND_READY BIT6 - -#define NAND_RESET_STATUS (0x60UL << 0) - -#define MAX_RETRY_COUNT 1500 - - -typedef struct { - UINT8 ManufactureId; - UINT8 DeviceId; - UINT8 BlockAddressStart; //Start of the Block address in actual NAND - UINT8 PageAddressStart; //Start of the Page address in actual NAND -} NAND_PART_INFO_TABLE; - -typedef struct { - UINT8 ManufactureId; - UINT8 DeviceId; - UINT8 Organization; //x8 or x16 - UINT32 PageSize; - UINT32 SparePageSize; - UINT32 BlockSize; - UINT32 NumPagesPerBlock; - UINT8 BlockAddressStart; //Start of the Block address in actual NAND - UINT8 PageAddressStart; //Start of the Page address in actual NAND -} NAND_FLASH_INFO; - -#endif //FLASH_H diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf b/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf deleted file mode 100644 index 4d9b630b0adc..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf +++ /dev/null @@ -1,48 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = NandFlash - FILE_GUID = 4d00ef14-c4e0-426b-81b7-30a00a14aad6 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = NandFlashInitialize - - -[Sources.common] - Flash.c - -[Packages] - MdePkg/MdePkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - PcdLib - UefiLib - UefiDriverEntryPoint - MemoryAllocationLib - IoLib - -[Guids] - -[Protocols] - gEfiBlockIoProtocolGuid - gEfiCpuArchProtocolGuid - -[Pcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset - -[depex] - TRUE diff --git a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c b/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c deleted file mode 100644 index 4d713f7bf58d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c +++ /dev/null @@ -1,135 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include - -#include -#include -#include - -#include - -#include - -EFI_STATUS -Get ( - IN EMBEDDED_GPIO *This, - IN EMBEDDED_GPIO_PIN Gpio, - OUT UINTN *Value - ) -{ - UINTN Port; - UINTN Pin; - UINT32 DataInRegister; - - if (Value == NULL) - { - return EFI_UNSUPPORTED; - } - - Port = GPIO_PORT(Gpio); - Pin = GPIO_PIN(Gpio); - - DataInRegister = GpioBase(Port) + GPIO_DATAIN; - - if (MmioRead32 (DataInRegister) & GPIO_DATAIN_MASK(Pin)) { - *Value = 1; - } else { - *Value = 0; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -Set ( - IN EMBEDDED_GPIO *This, - IN EMBEDDED_GPIO_PIN Gpio, - IN EMBEDDED_GPIO_MODE Mode - ) -{ - UINTN Port; - UINTN Pin; - UINT32 OutputEnableRegister; - UINT32 SetDataOutRegister; - UINT32 ClearDataOutRegister; - - Port = GPIO_PORT(Gpio); - Pin = GPIO_PIN(Gpio); - - OutputEnableRegister = GpioBase(Port) + GPIO_OE; - SetDataOutRegister = GpioBase(Port) + GPIO_SETDATAOUT; - ClearDataOutRegister = GpioBase(Port) + GPIO_CLEARDATAOUT; - - switch (Mode) - { - case GPIO_MODE_INPUT: - MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_INPUT(Pin)); - break; - - case GPIO_MODE_OUTPUT_0: - MmioWrite32 (ClearDataOutRegister, GPIO_CLEARDATAOUT_BIT(Pin)); - MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin)); - break; - - case GPIO_MODE_OUTPUT_1: - MmioWrite32 (SetDataOutRegister, GPIO_SETDATAOUT_BIT(Pin)); - MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin)); - break; - - default: - return EFI_UNSUPPORTED; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -GetMode ( - IN EMBEDDED_GPIO *This, - IN EMBEDDED_GPIO_PIN Gpio, - OUT EMBEDDED_GPIO_MODE *Mode - ) -{ - return EFI_UNSUPPORTED; -} - -EFI_STATUS -SetPull ( - IN EMBEDDED_GPIO *This, - IN EMBEDDED_GPIO_PIN Gpio, - IN EMBEDDED_GPIO_PULL Direction - ) -{ - return EFI_UNSUPPORTED; -} - -EMBEDDED_GPIO Gpio = { - Get, - Set, - GetMode, - SetPull -}; - -EFI_STATUS -GpioInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - Status = gBS->InstallMultipleProtocolInterfaces(&ImageHandle, &gEmbeddedGpioProtocolGuid, &Gpio, NULL); - return Status; -} diff --git a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf b/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf deleted file mode 100644 index 62073ff58c31..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf +++ /dev/null @@ -1,45 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = Gpio - FILE_GUID = E7D9CAE1-6930-46E3-BDF9-0027446E7DF2 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = GpioInitialize - - -[Sources.common] - Gpio.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - IoLib - UefiDriverEntryPoint - OmapLib - -[Guids] - -[Protocols] - gEmbeddedGpioProtocolGuid - -[Pcd] - -[depex] - TRUE diff --git a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h b/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h deleted file mode 100755 index dfac36f07e98..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h +++ /dev/null @@ -1,90 +0,0 @@ -/** @file - - Abstractions for simple OMAP DMA. - OMAP_DMA4 structure elements are described in the OMAP35xx TRM. - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP_DMA_LIB_H__ -#define __OMAP_DMA_LIB_H__ - - -// Example from DMA chapter of the OMAP35xx spec -typedef struct { - UINT8 DataType; // DMA4_CSDPi[1:0] - UINT8 ReadPortAccessType; // DMA4_CSDPi[8:7] - UINT8 WritePortAccessType; // DMA4_CSDPi[15:14] - UINT8 SourceEndiansim; // DMA4_CSDPi[21] - UINT8 DestinationEndianism; // DMA4_CSDPi[19] - UINT8 WriteMode; // DMA4_CSDPi[17:16] - UINT8 SourcePacked; // DMA4_CSDPi[6] - UINT8 DestinationPacked; // DMA4_CSDPi[13] - UINT32 NumberOfElementPerFrame; // DMA4_CENi - UINT32 NumberOfFramePerTransferBlock; // DMA4_CFNi - UINT32 SourceStartAddress; // DMA4_CSSAi - UINT32 DestinationStartAddress; // DMA4_CDSAi - UINT32 SourceElementIndex; // DMA4_CSEi - UINT32 SourceFrameIndex; // DMA4_CSFi - UINT32 DestinationElementIndex; // DMA4_CDEi - UINT32 DestinationFrameIndex; // DMA4_CDFi - UINT8 ReadPortAccessMode; // DMA4_CCRi[13:12] - UINT8 WritePortAccessMode; // DMA4_CCRi[15:14] - UINT8 ReadPriority; // DMA4_CCRi[6] - UINT8 WritePriority; // DMA4_CCRi[23] - UINT8 ReadRequestNumber; // DMA4_CCRi[4:0] - UINT8 WriteRequestNumber; // DMA4_CCRi[20:19] -} OMAP_DMA4; - - -/** - Configure OMAP DMA Channel - - @param Channel DMA Channel to configure - @param Dma4 Pointer to structure used to initialize DMA registers for the Channel - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Channel is not valid - @retval EFI_DEVICE_ERROR The system hardware could not map the requested information. - -**/ -EFI_STATUS -EFIAPI -EnableDmaChannel ( - IN UINTN Channel, - IN OMAP_DMA4 *Dma4 - ); - -/** - Turn of DMA channel configured by EnableDma(). - - @param Channel DMA Channel to configure - @param SuccesMask Bits in DMA4_CSR register indicate EFI_SUCCESS - @param ErrorMask Bits in DMA4_CSR register indicate EFI_DEVICE_ERROR - - @retval EFI_SUCCESS DMA hardware disabled - @retval EFI_INVALID_PARAMETER Channel is not valid - @retval EFI_DEVICE_ERROR The system hardware could not map the requested information. - -**/ -EFI_STATUS -EFIAPI -DisableDmaChannel ( - IN UINTN Channel, - IN UINT32 SuccessMask, - IN UINT32 ErrorMask - ); - - - -#endif - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h b/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h deleted file mode 100644 index ec14603ccd82..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h +++ /dev/null @@ -1,44 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAPLIB_H__ -#define __OMAPLIB_H__ - -UINT32 -EFIAPI -GpioBase ( - IN UINTN Port - ); - -UINT32 -EFIAPI -TimerBase ( - IN UINTN Timer - ); - -UINTN -EFIAPI -InterruptVectorForTimer ( - IN UINTN TImer - ); - -UINT32 -EFIAPI -UartBase ( - IN UINTN Uart - ); - - -#endif // __OMAPLIB_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h deleted file mode 100644 index 4d3781576493..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h +++ /dev/null @@ -1,40 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530_H__ -#define __OMAP3530_H__ - -#include "Omap3530Gpio.h" -#include "Omap3530Interrupt.h" -#include "Omap3530Prcm.h" -#include "Omap3530Timer.h" -#include "Omap3530Uart.h" -#include "Omap3530Usb.h" -#include "Omap3530MMCHS.h" -#include "Omap3530I2c.h" -#include "Omap3530PadConfiguration.h" -#include "Omap3530Gpmc.h" -#include "Omap3530Dma.h" - - -//CONTROL_PBIAS_LITE -#define CONTROL_PBIAS_LITE 0x48002520 -#define PBIASLITEVMODE0 BIT0 -#define PBIASLITEPWRDNZ0 BIT1 -#define PBIASSPEEDCTRL0 BIT2 -#define PBIASLITEVMODE1 BIT8 -#define PBIASLITEWRDNZ1 BIT9 - -#endif // __OMAP3530_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h deleted file mode 100755 index a6e070dda370..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h +++ /dev/null @@ -1,130 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530DMA_H__ -#define __OMAP3530DMA_H__ - - -#define DMA4_MAX_CHANNEL 31 - -#define DMA4_IRQENABLE_L(_i) (0x48056018 + (0x4*(_i))) - -#define DMA4_CCR(_i) (0x48056080 + (0x60*(_i))) -#define DMA4_CICR(_i) (0x48056088 + (0x60*(_i))) -#define DMA4_CSR(_i) (0x4805608c + (0x60*(_i))) -#define DMA4_CSDP(_i) (0x48056090 + (0x60*(_i))) -#define DMA4_CEN(_i) (0x48056094 + (0x60*(_i))) -#define DMA4_CFN(_i) (0x48056098 + (0x60*(_i))) -#define DMA4_CSSA(_i) (0x4805609c + (0x60*(_i))) -#define DMA4_CDSA(_i) (0x480560a0 + (0x60*(_i))) -#define DMA4_CSEI(_i) (0x480560a4 + (0x60*(_i))) -#define DMA4_CSFI(_i) (0x480560a8 + (0x60*(_i))) -#define DMA4_CDEI(_i) (0x480560ac + (0x60*(_i))) -#define DMA4_CDFI(_i) (0x480560b0 + (0x60*(_i))) - -#define DMA4_GCR (0x48056078) - -// Channel Source Destination parameters -#define DMA4_CSDP_DATA_TYPE8 0 -#define DMA4_CSDP_DATA_TYPE16 1 -#define DMA4_CSDP_DATA_TYPE32 2 - -#define DMA4_CSDP_SRC_PACKED BIT6 -#define DMA4_CSDP_SRC_NONPACKED 0 - -#define DMA4_CSDP_SRC_BURST_EN (0x0 << 7) -#define DMA4_CSDP_SRC_BURST_EN16 (0x1 << 7) -#define DMA4_CSDP_SRC_BURST_EN32 (0x2 << 7) -#define DMA4_CSDP_SRC_BURST_EN64 (0x3 << 7) - -#define DMA4_CSDP_DST_PACKED BIT13 -#define DMA4_CSDP_DST_NONPACKED 0 - -#define DMA4_CSDP_BURST_EN (0x0 << 14) -#define DMA4_CSDP_BURST_EN16 (0x1 << 14) -#define DMA4_CSDP_BURST_EN32 (0x2 << 14) -#define DMA4_CSDP_BURST_EN64 (0x3 << 14) - -#define DMA4_CSDP_WRITE_MODE_NONE_POSTED (0x0 << 16) -#define DMA4_CSDP_WRITE_MODE_POSTED (0x1 << 16) -#define DMA4_CSDP_WRITE_MODE_LAST_NON_POSTED (0x2 << 16) - -#define DMA4_CSDP_DST_ENDIAN_LOCK_LOCK BIT18 -#define DMA4_CSDP_DST_ENDIAN_LOCK_ADAPT 0 - -#define DMA4_CSDP_DST_ENDIAN_BIG BIT19 -#define DMA4_CSDP_DST_ENDIAN_LITTLE 0 - -#define DMA4_CSDP_SRC_ENDIAN_LOCK_LOCK BIT20 -#define DMA4_CSDP_SRC_ENDIAN_LOCK_ADAPT 0 - -#define DMA4_CSDP_SRC_ENDIAN_BIG BIT21 -#define DMA4_CSDP_SRC_ENDIAN_LITTLE 0 - -// Channel Control -#define DMA4_CCR_SYNCHRO_CONTROL_MASK 0x1f - -#define DMA4_CCR_FS_ELEMENT (0 | 0) -#define DMA4_CCR_FS_BLOCK (0 | BIT18) -#define DMA4_CCR_FS_FRAME (BIT5 | 0) -#define DMA4_CCR_FS_PACKET (BIT5 | BIT18) - -#define DMA4_CCR_READ_PRIORITY_HIGH BIT6 -#define DMA4_CCR_READ_PRIORITY_LOW 0 - -#define DMA4_CCR_ENABLE BIT7 -#define DMA4_CCR_DISABLE 0 - -#define DMA4_CCR_SUSPEND_SENSITIVE_IGNORE BIT8 -#define DMA4_CCR_SUSPEND_SENSITIVE 0 - -#define DMA4_CCR_RD_ACTIVE BIT9 -#define DMA4_CCR_WR_ACTIVE BIT10 - -#define DMA4_CCR_SRC_AMODE (0 | 0) -#define DMA4_CCR_SRC_AMODE_POST_INC (0 | BIT12) -#define DMA4_CCR_SRC_AMODE_SINGLE_INDEX (BIT13 | 0) -#define DMA4_CCR_SRC_AMODE_DOUBLE_INDEX (BIT13 | BIT12) - -#define DMA4_CCR_DST_AMODE (0 | 0) -#define DMA4_CCR_DST_AMODE_POST_INC (0 | BIT14) -#define DMA4_CCR_DST_AMODE_SINGLE_INDEX (BIT15 | 0) -#define DMA4_CCR_DST_AMODE_DOUBLE_INDEX (BIT15 | BIT14) - -#define DMA4_CCR_CONST_FILL_ENABLE BIT16 -#define DMA4_CCR_TRANSPARENT_COPY_ENABLE BIT17 - -#define DMA4_CCR_SEL_SRC_DEST_SYNC_SOURCE BIT24 - -#define DMA4_CSR_DROP BIT1 -#define DMA4_CSR_HALF BIT2 -#define DMA4_CSR_FRAME BIT3 -#define DMA4_CSR_LAST BIT4 -#define DMA4_CSR_BLOCK BIT5 -#define DMA4_CSR_SYNC BIT6 -#define DMA4_CSR_PKT BIT7 -#define DMA4_CSR_TRANS_ERR BIT8 -#define DMA4_CSR_SECURE_ERR BIT9 -#define DMA4_CSR_SUPERVISOR_ERR BIT10 -#define DMA4_CSR_MISALIGNED_ADRS_ERR BIT11 -#define DMA4_CSR_DRAIN_END BIT12 -#define DMA4_CSR_RESET 0x1FE -#define DMA4_CSR_ERR (DMA4_CSR_TRANS_ERR | DMA4_CSR_SECURE_ERR | DMA4_CSR_SUPERVISOR_ERR | DMA4_CSR_MISALIGNED_ADRS_ERR) - -// same mapping as CSR except for SYNC. Enable all since we are polling -#define DMA4_CICR_ENABLE_ALL 0x1FBE - - -#endif - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h deleted file mode 100644 index e45a0f23b5ea..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h +++ /dev/null @@ -1,131 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530GPIO_H__ -#define __OMAP3530GPIO_H__ - -#define GPIO1_BASE (0x48310000) -#define GPIO2_BASE (0x49050000) -#define GPIO3_BASE (0x49052000) -#define GPIO4_BASE (0x49054000) -#define GPIO5_BASE (0x49056000) -#define GPIO6_BASE (0x49058000) - -#define GPIO_SYSCONFIG (0x0010) -#define GPIO_SYSSTATUS (0x0014) -#define GPIO_IRQSTATUS1 (0x0018) -#define GPIO_IRQENABLE1 (0x001C) -#define GPIO_WAKEUPENABLE (0x0020) -#define GPIO_IRQSTATUS2 (0x0028) -#define GPIO_IRQENABLE2 (0x002C) -#define GPIO_CTRL (0x0030) -#define GPIO_OE (0x0034) -#define GPIO_DATAIN (0x0038) -#define GPIO_DATAOUT (0x003C) -#define GPIO_LEVELDETECT0 (0x0040) -#define GPIO_LEVELDETECT1 (0x0044) -#define GPIO_RISINGDETECT (0x0048) -#define GPIO_FALLINGDETECT (0x004C) -#define GPIO_DEBOUNCENABLE (0x0050) -#define GPIO_DEBOUNCINGTIME (0x0054) -#define GPIO_CLEARIRQENABLE1 (0x0060) -#define GPIO_SETIRQENABLE1 (0x0064) -#define GPIO_CLEARIRQENABLE2 (0x0070) -#define GPIO_SETIRQENABLE2 (0x0074) -#define GPIO_CLEARWKUENA (0x0080) -#define GPIO_SETWKUENA (0x0084) -#define GPIO_CLEARDATAOUT (0x0090) -#define GPIO_SETDATAOUT (0x0094) - -#define GPIO_SYSCONFIG_IDLEMODE_MASK (3UL << 3) -#define GPIO_SYSCONFIG_IDLEMODE_FORCE (0UL << 3) -#define GPIO_SYSCONFIG_IDLEMODE_NONE BIT3 -#define GPIO_SYSCONFIG_IDLEMODE_SMART (2UL << 3) -#define GPIO_SYSCONFIG_ENAWAKEUP_MASK BIT2 -#define GPIO_SYSCONFIG_ENAWAKEUP_DISABLE (0UL << 2) -#define GPIO_SYSCONFIG_ENAWAKEUP_ENABLE BIT2 -#define GPIO_SYSCONFIG_SOFTRESET_MASK BIT1 -#define GPIO_SYSCONFIG_SOFTRESET_NORMAL (0UL << 1) -#define GPIO_SYSCONFIG_SOFTRESET_RESET BIT1 -#define GPIO_SYSCONFIG_AUTOIDLE_MASK BIT0 -#define GPIO_SYSCONFIG_AUTOIDLE_FREE_RUN (0UL << 0) -#define GPIO_SYSCONFIG_AUTOIDLE_ON BIT0 - -#define GPIO_SYSSTATUS_RESETDONE_MASK BIT0 -#define GPIO_SYSSTATUS_RESETDONE_ONGOING (0UL << 0) -#define GPIO_SYSSTATUS_RESETDONE_COMPLETE BIT0 - -#define GPIO_IRQSTATUS_MASK(x) (1UL << (x)) -#define GPIO_IRQSTATUS_NOT_TRIGGERED(x) (0UL << (x)) -#define GPIO_IRQSTATUS_TRIGGERED(x) (1UL << (x)) -#define GPIO_IRQSTATUS_CLEAR(x) (1UL << (x)) - -#define GPIO_IRQENABLE_MASK(x) (1UL << (x)) -#define GPIO_IRQENABLE_DISABLE(x) (0UL << (x)) -#define GPIO_IRQENABLE_ENABLE(x) (1UL << (x)) - -#define GPIO_WAKEUPENABLE_MASK(x) (1UL << (x)) -#define GPIO_WAKEUPENABLE_DISABLE(x) (0UL << (x)) -#define GPIO_WAKEUPENABLE_ENABLE(x) (1UL << (x)) - -#define GPIO_CTRL_GATINGRATIO_MASK (3UL << 1) -#define GPIO_CTRL_GATINGRATIO_DIV_1 (0UL << 1) -#define GPIO_CTRL_GATINGRATIO_DIV_2 BIT1 -#define GPIO_CTRL_GATINGRATIO_DIV_4 (2UL << 1) -#define GPIO_CTRL_GATINGRATIO_DIV_8 (3UL << 1) -#define GPIO_CTRL_DISABLEMODULE_MASK BIT0 -#define GPIO_CTRL_DISABLEMODULE_ENABLE (0UL << 0) -#define GPIO_CTRL_DISABLEMODULE_DISABLE BIT0 - -#define GPIO_OE_MASK(x) (1UL << (x)) -#define GPIO_OE_OUTPUT(x) (0UL << (x)) -#define GPIO_OE_INPUT(x) (1UL << (x)) - -#define GPIO_DATAIN_MASK(x) (1UL << (x)) - -#define GPIO_DATAOUT_MASK(x) (1UL << (x)) - -#define GPIO_LEVELDETECT_MASK(x) (1UL << (x)) -#define GPIO_LEVELDETECT_DISABLE(x) (0UL << (x)) -#define GPIO_LEVELDETECT_ENABLE(x) (1UL << (x)) - -#define GPIO_RISINGDETECT_MASK(x) (1UL << (x)) -#define GPIO_RISINGDETECT_DISABLE(x) (0UL << (x)) -#define GPIO_RISINGDETECT_ENABLE(x) (1UL << (x)) - -#define GPIO_FALLINGDETECT_MASK(x) (1UL << (x)) -#define GPIO_FALLINGDETECT_DISABLE(x) (0UL << (x)) -#define GPIO_FALLINGDETECT_ENABLE(x) (1UL << (x)) - -#define GPIO_DEBOUNCENABLE_MASK(x) (1UL << (x)) -#define GPIO_DEBOUNCENABLE_DISABLE(x) (0UL << (x)) -#define GPIO_DEBOUNCENABLE_ENABLE(x) (1UL << (x)) - -#define GPIO_DEBOUNCINGTIME_MASK (0xFF) -#define GPIO_DEBOUNCINGTIME_US(x) ((((x) / 31) - 1) & GPIO_DEBOUNCINGTIME_MASK) - -#define GPIO_CLEARIRQENABLE_BIT(x) (1UL << (x)) - -#define GPIO_SETIRQENABLE_BIT(x) (1UL << (x)) - -#define GPIO_CLEARWKUENA_BIT(x) (1UL << (x)) - -#define GPIO_SETWKUENA_BIT(x) (1UL << (x)) - -#define GPIO_CLEARDATAOUT_BIT(x) (1UL << (x)) - -#define GPIO_SETDATAOUT_BIT(x) (1UL << (x)) - -#endif // __OMAP3530GPIO_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h deleted file mode 100644 index 6943d303ec63..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h +++ /dev/null @@ -1,107 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530GPMC_H__ -#define __OMAP3530GPMC_H__ - -#define GPMC_BASE (0x6E000000) - -//GPMC NAND definitions. -#define GPMC_SYSCONFIG (GPMC_BASE + 0x10) -#define SMARTIDLEMODE (0x2UL << 3) - -#define GPMC_SYSSTATUS (GPMC_BASE + 0x14) -#define GPMC_IRQSTATUS (GPMC_BASE + 0x18) -#define GPMC_IRQENABLE (GPMC_BASE + 0x1C) - -#define GPMC_TIMEOUT_CONTROL (GPMC_BASE + 0x40) -#define TIMEOUTENABLE BIT0 -#define TIMEOUTDISABLE (0x0UL << 0) - -#define GPMC_ERR_ADDRESS (GPMC_BASE + 0x44) -#define GPMC_ERR_TYPE (GPMC_BASE + 0x48) - -#define GPMC_CONFIG (GPMC_BASE + 0x50) -#define WRITEPROTECT_HIGH BIT4 -#define WRITEPROTECT_LOW (0x0UL << 4) - -#define GPMC_STATUS (GPMC_BASE + 0x54) - -#define GPMC_CONFIG1_0 (GPMC_BASE + 0x60) -#define DEVICETYPE_NOR (0x0UL << 10) -#define DEVICETYPE_NAND (0x2UL << 10) -#define DEVICESIZE_X8 (0x0UL << 12) -#define DEVICESIZE_X16 BIT12 - -#define GPMC_CONFIG2_0 (GPMC_BASE + 0x64) -#define CSONTIME (0x0UL << 0) -#define CSRDOFFTIME (0x14UL << 8) -#define CSWROFFTIME (0x14UL << 16) - -#define GPMC_CONFIG3_0 (GPMC_BASE + 0x68) -#define ADVRDOFFTIME (0x14UL << 8) -#define ADVWROFFTIME (0x14UL << 16) - -#define GPMC_CONFIG4_0 (GPMC_BASE + 0x6C) -#define OEONTIME BIT0 -#define OEOFFTIME (0xFUL << 8) -#define WEONTIME BIT16 -#define WEOFFTIME (0xFUL << 24) - -#define GPMC_CONFIG5_0 (GPMC_BASE + 0x70) -#define RDCYCLETIME (0x14UL << 0) -#define WRCYCLETIME (0x14UL << 8) -#define RDACCESSTIME (0xCUL << 16) -#define PAGEBURSTACCESSTIME BIT24 - -#define GPMC_CONFIG6_0 (GPMC_BASE + 0x74) -#define CYCLE2CYCLESAMECSEN BIT7 -#define CYCLE2CYCLEDELAY (0xAUL << 8) -#define WRDATAONADMUXBUS (0xFUL << 16) -#define WRACCESSTIME BIT24 - -#define GPMC_CONFIG7_0 (GPMC_BASE + 0x78) -#define BASEADDRESS (0x30UL << 0) -#define CSVALID BIT6 -#define MASKADDRESS_128MB (0x8UL << 8) - -#define GPMC_NAND_COMMAND_0 (GPMC_BASE + 0x7C) -#define GPMC_NAND_ADDRESS_0 (GPMC_BASE + 0x80) -#define GPMC_NAND_DATA_0 (GPMC_BASE + 0x84) - -#define GPMC_ECC_CONFIG (GPMC_BASE + 0x1F4) -#define ECCENABLE BIT0 -#define ECCDISABLE (0x0UL << 0) -#define ECCCS_0 (0x0UL << 1) -#define ECC16B BIT7 - -#define GPMC_ECC_CONTROL (GPMC_BASE + 0x1F8) -#define ECCPOINTER_REG1 BIT0 -#define ECCCLEAR BIT8 - -#define GPMC_ECC_SIZE_CONFIG (GPMC_BASE + 0x1FC) -#define ECCSIZE0_512BYTES (0xFFUL << 12) -#define ECCSIZE1_512BYTES (0xFFUL << 22) - -#define GPMC_ECC1_RESULT (GPMC_BASE + 0x200) -#define GPMC_ECC2_RESULT (GPMC_BASE + 0x204) -#define GPMC_ECC3_RESULT (GPMC_BASE + 0x208) -#define GPMC_ECC4_RESULT (GPMC_BASE + 0x20C) -#define GPMC_ECC5_RESULT (GPMC_BASE + 0x210) -#define GPMC_ECC6_RESULT (GPMC_BASE + 0x214) -#define GPMC_ECC7_RESULT (GPMC_BASE + 0x218) -#define GPMC_ECC8_RESULT (GPMC_BASE + 0x21C) -#define GPMC_ECC9_RESULT (GPMC_BASE + 0x220) - -#endif //__OMAP3530GPMC_H__ diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h deleted file mode 100644 index 31d4d5ea6403..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h +++ /dev/null @@ -1,62 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530I2C_H__ -#define __OMAP3530I2C_H__ - -//I2C register definitions. -#define I2C1BASE 0x48070000 - -#define I2C_IE (I2C1BASE + 0x4) -#define XRDY_IE BIT4 -#define RRDY_IE BIT3 -#define ARDY_IE BIT2 -#define NACK_IE BIT1 - -#define I2C_STAT (I2C1BASE + 0x8) -#define BB BIT12 -#define XRDY BIT4 -#define RRDY BIT3 -#define ARDY BIT2 -#define NACK BIT1 - -#define I2C_WE (I2C1BASE + 0xC) -#define I2C_SYSS (I2C1BASE + 0x10) -#define I2C_BUF (I2C1BASE + 0x14) -#define I2C_CNT (I2C1BASE + 0x18) -#define I2C_DATA (I2C1BASE + 0x1C) -#define I2C_SYSC (I2C1BASE + 0x20) - -#define I2C_CON (I2C1BASE + 0x24) -#define STT BIT0 -#define STP BIT1 -#define XSA BIT8 -#define TRX BIT9 -#define MST BIT10 -#define I2C_EN BIT15 - -#define I2C_OA0 (I2C1BASE + 0x28) -#define I2C_SA (I2C1BASE + 0x2C) -#define I2C_PSC (I2C1BASE + 0x30) -#define I2C_SCLL (I2C1BASE + 0x34) -#define I2C_SCLH (I2C1BASE + 0x38) -#define I2C_SYSTEST (I2C1BASE + 0x3C) -#define I2C_BUFSTAT (I2C1BASE + 0x40) -#define I2C_OA1 (I2C1BASE + 0x44) -#define I2C_OA2 (I2C1BASE + 0x48) -#define I2C_OA3 (I2C1BASE + 0x4C) -#define I2C_ACTOA (I2C1BASE + 0x50) -#define I2C_SBLOCK (I2C1BASE + 0x54) - -#endif //__OMAP3530I2C_H__ diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h deleted file mode 100644 index 774d8730153d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530INTERRUPT_H__ -#define __OMAP3530INTERRUPT_H__ - -#define INTERRUPT_BASE (0x48200000) - -#define INT_NROF_VECTORS (96) -#define MAX_VECTOR (INT_NROF_VECTORS - 1) -#define INTCPS_SYSCONFIG (INTERRUPT_BASE + 0x0010) -#define INTCPS_SYSSTATUS (INTERRUPT_BASE + 0x0014) -#define INTCPS_SIR_IRQ (INTERRUPT_BASE + 0x0040) -#define INTCPS_SIR_IFQ (INTERRUPT_BASE + 0x0044) -#define INTCPS_CONTROL (INTERRUPT_BASE + 0x0048) -#define INTCPS_PROTECTION (INTERRUPT_BASE + 0x004C) -#define INTCPS_IDLE (INTERRUPT_BASE + 0x0050) -#define INTCPS_IRQ_PRIORITY (INTERRUPT_BASE + 0x0060) -#define INTCPS_FIQ_PRIORITY (INTERRUPT_BASE + 0x0064) -#define INTCPS_THRESHOLD (INTERRUPT_BASE + 0x0068) -#define INTCPS_ITR(n) (INTERRUPT_BASE + 0x0080 + (0x20 * (n))) -#define INTCPS_MIR(n) (INTERRUPT_BASE + 0x0084 + (0x20 * (n))) -#define INTCPS_MIR_CLEAR(n) (INTERRUPT_BASE + 0x0088 + (0x20 * (n))) -#define INTCPS_MIR_SET(n) (INTERRUPT_BASE + 0x008C + (0x20 * (n))) -#define INTCPS_ISR_SET(n) (INTERRUPT_BASE + 0x0090 + (0x20 * (n))) -#define INTCPS_ISR_CLEAR(n) (INTERRUPT_BASE + 0x0094 + (0x20 * (n))) -#define INTCPS_PENDING_IRQ(n) (INTERRUPT_BASE + 0x0098 + (0x20 * (n))) -#define INTCPS_PENDING_FIQ(n) (INTERRUPT_BASE + 0x009C + (0x20 * (n))) -#define INTCPS_ILR(m) (INTERRUPT_BASE + 0x0100 + (0x04 * (m))) - -#define INTCPS_ILR_FIQ BIT0 -#define INTCPS_SIR_IRQ_MASK (0x7F) -#define INTCPS_CONTROL_NEWIRQAGR BIT0 -#define INTCPS_CONTROL_NEWFIQAGR BIT1 - -#endif // __OMAP3530INTERRUPT_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h deleted file mode 100644 index 88b43de48085..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h +++ /dev/null @@ -1,214 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530SDIO_H__ -#define __OMAP3530SDIO_H__ - -//MMC/SD/SDIO1 register definitions. -#define MMCHS1BASE 0x4809C000 -#define MMC_REFERENCE_CLK (96000000) - -#define MMCHS_SYSCONFIG (MMCHS1BASE + 0x10) -#define SOFTRESET BIT1 -#define ENAWAKEUP BIT2 - -#define MMCHS_SYSSTATUS (MMCHS1BASE + 0x14) -#define RESETDONE_MASK BIT0 -#define RESETDONE BIT0 - -#define MMCHS_CSRE (MMCHS1BASE + 0x24) -#define MMCHS_SYSTEST (MMCHS1BASE + 0x28) - -#define MMCHS_CON (MMCHS1BASE + 0x2C) -#define OD BIT0 -#define NOINIT (0x0UL << 1) -#define INIT BIT1 -#define HR BIT2 -#define STR BIT3 -#define MODE BIT4 -#define DW8_1_4_BIT (0x0UL << 5) -#define DW8_8_BIT BIT5 -#define MIT BIT6 -#define CDP BIT7 -#define WPP BIT8 -#define CTPL BIT11 -#define CEATA_OFF (0x0UL << 12) -#define CEATA_ON BIT12 - -#define MMCHS_PWCNT (MMCHS1BASE + 0x30) - -#define MMCHS_BLK (MMCHS1BASE + 0x104) -#define BLEN_512BYTES (0x200UL << 0) - -#define MMCHS_ARG (MMCHS1BASE + 0x108) - -#define MMCHS_CMD (MMCHS1BASE + 0x10C) -#define DE_ENABLE BIT0 -#define BCE_ENABLE BIT1 -#define ACEN_ENABLE BIT2 -#define DDIR_READ BIT4 -#define DDIR_WRITE (0x0UL << 4) -#define MSBS_SGLEBLK (0x0UL << 5) -#define MSBS_MULTBLK BIT5 -#define RSP_TYPE_MASK (0x3UL << 16) -#define RSP_TYPE_136BITS BIT16 -#define RSP_TYPE_48BITS (0x2UL << 16) -#define CCCE_ENABLE BIT19 -#define CICE_ENABLE BIT20 -#define DP_ENABLE BIT21 -#define INDX(CMD_INDX) ((CMD_INDX & 0x3F) << 24) - -#define MMCHS_RSP10 (MMCHS1BASE + 0x110) -#define MMCHS_RSP32 (MMCHS1BASE + 0x114) -#define MMCHS_RSP54 (MMCHS1BASE + 0x118) -#define MMCHS_RSP76 (MMCHS1BASE + 0x11C) -#define MMCHS_DATA (MMCHS1BASE + 0x120) - -#define MMCHS_PSTATE (MMCHS1BASE + 0x124) -#define CMDI_MASK BIT0 -#define CMDI_ALLOWED (0x0UL << 0) -#define CMDI_NOT_ALLOWED BIT0 -#define DATI_MASK BIT1 -#define DATI_ALLOWED (0x0UL << 1) -#define DATI_NOT_ALLOWED BIT1 - -#define MMCHS_HCTL (MMCHS1BASE + 0x128) -#define DTW_1_BIT (0x0UL << 1) -#define DTW_4_BIT BIT1 -#define SDBP_MASK BIT8 -#define SDBP_OFF (0x0UL << 8) -#define SDBP_ON BIT8 -#define SDVS_1_8_V (0x5UL << 9) -#define SDVS_3_0_V (0x6UL << 9) -#define IWE BIT24 - -#define MMCHS_SYSCTL (MMCHS1BASE + 0x12C) -#define ICE BIT0 -#define ICS_MASK BIT1 -#define ICS BIT1 -#define CEN BIT2 -#define CLKD_MASK (0x3FFUL << 6) -#define CLKD_80KHZ (0x258UL) //(96*1000/80)/2 -#define CLKD_400KHZ (0xF0UL) -#define DTO_MASK (0xFUL << 16) -#define DTO_VAL (0xEUL << 16) -#define SRA BIT24 -#define SRC_MASK BIT25 -#define SRC BIT25 -#define SRD BIT26 - -#define MMCHS_STAT (MMCHS1BASE + 0x130) -#define CC BIT0 -#define TC BIT1 -#define BWR BIT4 -#define BRR BIT5 -#define ERRI BIT15 -#define CTO BIT16 -#define DTO BIT20 -#define DCRC BIT21 -#define DEB BIT22 - -#define MMCHS_IE (MMCHS1BASE + 0x134) -#define CC_EN BIT0 -#define TC_EN BIT1 -#define BWR_EN BIT4 -#define BRR_EN BIT5 -#define CTO_EN BIT16 -#define CCRC_EN BIT17 -#define CEB_EN BIT18 -#define CIE_EN BIT19 -#define DTO_EN BIT20 -#define DCRC_EN BIT21 -#define DEB_EN BIT22 -#define CERR_EN BIT28 -#define BADA_EN BIT29 - -#define MMCHS_ISE (MMCHS1BASE + 0x138) -#define CC_SIGEN BIT0 -#define TC_SIGEN BIT1 -#define BWR_SIGEN BIT4 -#define BRR_SIGEN BIT5 -#define CTO_SIGEN BIT16 -#define CCRC_SIGEN BIT17 -#define CEB_SIGEN BIT18 -#define CIE_SIGEN BIT19 -#define DTO_SIGEN BIT20 -#define DCRC_SIGEN BIT21 -#define DEB_SIGEN BIT22 -#define CERR_SIGEN BIT28 -#define BADA_SIGEN BIT29 - -#define MMCHS_AC12 (MMCHS1BASE + 0x13C) - -#define MMCHS_CAPA (MMCHS1BASE + 0x140) -#define VS30 BIT25 -#define VS18 BIT26 - -#define MMCHS_CUR_CAPA (MMCHS1BASE + 0x148) -#define MMCHS_REV (MMCHS1BASE + 0x1FC) - -#define CMD0 INDX(0) -#define CMD0_INT_EN (CC_EN | CEB_EN) - -#define CMD1 (INDX(1) | RSP_TYPE_48BITS) -#define CMD1_INT_EN (CC_EN | CEB_EN | CTO_EN) - -#define CMD2 (INDX(2) | CCCE_ENABLE | RSP_TYPE_136BITS) -#define CMD2_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD3 (INDX(3) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD3_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD5 (INDX(5) | RSP_TYPE_48BITS) -#define CMD5_INT_EN (CC_EN | CEB_EN | CTO_EN) - -#define CMD7 (INDX(7) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD7_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD8 (INDX(8) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD8_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) -//Reserved(0)[12:31], Supply voltage(1)[11:8], check pattern(0xCE)[7:0] = 0x1CE -#define CMD8_ARG (0x0UL << 12 | BIT8 | 0xCEUL << 0) - -#define CMD9 (INDX(9) | CCCE_ENABLE | RSP_TYPE_136BITS) -#define CMD9_INT_EN (CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD16 (INDX(16) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD16_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD17 (INDX(17) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | DDIR_READ) -#define CMD17_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN) - -#define CMD18 (INDX(18) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | MSBS_MULTBLK | DDIR_READ | BCE_ENABLE | DE_ENABLE) -#define CMD18_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN) - -#define CMD23 (INDX(23) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD23_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define CMD24 (INDX(24) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | DDIR_WRITE) -#define CMD24_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BWR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN) - -#define CMD25 (INDX(25) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | MSBS_MULTBLK | DDIR_READ | BCE_ENABLE | DE_ENABLE) -#define CMD25_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN) - -#define CMD55 (INDX(55) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) -#define CMD55_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define ACMD41 (INDX(41) | RSP_TYPE_48BITS) -#define ACMD41_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#define ACMD6 (INDX(6) | RSP_TYPE_48BITS) -#define ACMD6_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) - -#endif //__OMAP3530SDIO_H__ diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h deleted file mode 100644 index 1588e1d4d91f..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h +++ /dev/null @@ -1,303 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530_PAD_CONFIGURATION_H__ -#define __OMAP3530_PAD_CONFIGURATION_H__ - -#define SYSTEM_CONTROL_MODULE_BASE 0x48002000 - -//Pin definition -#define SDRC_D0 (SYSTEM_CONTROL_MODULE_BASE + 0x030) -#define SDRC_D1 (SYSTEM_CONTROL_MODULE_BASE + 0x032) -#define SDRC_D2 (SYSTEM_CONTROL_MODULE_BASE + 0x034) -#define SDRC_D3 (SYSTEM_CONTROL_MODULE_BASE + 0x036) -#define SDRC_D4 (SYSTEM_CONTROL_MODULE_BASE + 0x038) -#define SDRC_D5 (SYSTEM_CONTROL_MODULE_BASE + 0x03A) -#define SDRC_D6 (SYSTEM_CONTROL_MODULE_BASE + 0x03C) -#define SDRC_D7 (SYSTEM_CONTROL_MODULE_BASE + 0x03E) -#define SDRC_D8 (SYSTEM_CONTROL_MODULE_BASE + 0x040) -#define SDRC_D9 (SYSTEM_CONTROL_MODULE_BASE + 0x042) -#define SDRC_D10 (SYSTEM_CONTROL_MODULE_BASE + 0x044) -#define SDRC_D11 (SYSTEM_CONTROL_MODULE_BASE + 0x046) -#define SDRC_D12 (SYSTEM_CONTROL_MODULE_BASE + 0x048) -#define SDRC_D13 (SYSTEM_CONTROL_MODULE_BASE + 0x04A) -#define SDRC_D14 (SYSTEM_CONTROL_MODULE_BASE + 0x04C) -#define SDRC_D15 (SYSTEM_CONTROL_MODULE_BASE + 0x04E) -#define SDRC_D16 (SYSTEM_CONTROL_MODULE_BASE + 0x050) -#define SDRC_D17 (SYSTEM_CONTROL_MODULE_BASE + 0x052) -#define SDRC_D18 (SYSTEM_CONTROL_MODULE_BASE + 0x054) -#define SDRC_D19 (SYSTEM_CONTROL_MODULE_BASE + 0x056) -#define SDRC_D20 (SYSTEM_CONTROL_MODULE_BASE + 0x058) -#define SDRC_D21 (SYSTEM_CONTROL_MODULE_BASE + 0x05A) -#define SDRC_D22 (SYSTEM_CONTROL_MODULE_BASE + 0x05C) -#define SDRC_D23 (SYSTEM_CONTROL_MODULE_BASE + 0x05E) -#define SDRC_D24 (SYSTEM_CONTROL_MODULE_BASE + 0x060) -#define SDRC_D25 (SYSTEM_CONTROL_MODULE_BASE + 0x062) -#define SDRC_D26 (SYSTEM_CONTROL_MODULE_BASE + 0x064) -#define SDRC_D27 (SYSTEM_CONTROL_MODULE_BASE + 0x066) -#define SDRC_D28 (SYSTEM_CONTROL_MODULE_BASE + 0x068) -#define SDRC_D29 (SYSTEM_CONTROL_MODULE_BASE + 0x06A) -#define SDRC_D30 (SYSTEM_CONTROL_MODULE_BASE + 0x06C) -#define SDRC_D31 (SYSTEM_CONTROL_MODULE_BASE + 0x06E) -#define SDRC_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x070) -#define SDRC_DQS0 (SYSTEM_CONTROL_MODULE_BASE + 0x072) -#define SDRC_CKE0 (SYSTEM_CONTROL_MODULE_BASE + 0x262) -#define SDRC_CKE1 (SYSTEM_CONTROL_MODULE_BASE + 0x264) -#define SDRC_DQS1 (SYSTEM_CONTROL_MODULE_BASE + 0x074) -#define SDRC_DQS2 (SYSTEM_CONTROL_MODULE_BASE + 0x076) -#define SDRC_DQS3 (SYSTEM_CONTROL_MODULE_BASE + 0x078) -#define GPMC_A1 (SYSTEM_CONTROL_MODULE_BASE + 0x07A) -#define GPMC_A2 (SYSTEM_CONTROL_MODULE_BASE + 0x07C) -#define GPMC_A3 (SYSTEM_CONTROL_MODULE_BASE + 0x07E) -#define GPMC_A4 (SYSTEM_CONTROL_MODULE_BASE + 0x080) -#define GPMC_A5 (SYSTEM_CONTROL_MODULE_BASE + 0x082) -#define GPMC_A6 (SYSTEM_CONTROL_MODULE_BASE + 0x084) -#define GPMC_A7 (SYSTEM_CONTROL_MODULE_BASE + 0x086) -#define GPMC_A8 (SYSTEM_CONTROL_MODULE_BASE + 0x088) -#define GPMC_A9 (SYSTEM_CONTROL_MODULE_BASE + 0x08A) -#define GPMC_A10 (SYSTEM_CONTROL_MODULE_BASE + 0x08C) -#define GPMC_D0 (SYSTEM_CONTROL_MODULE_BASE + 0x08E) -#define GPMC_D1 (SYSTEM_CONTROL_MODULE_BASE + 0x090) -#define GPMC_D2 (SYSTEM_CONTROL_MODULE_BASE + 0x092) -#define GPMC_D3 (SYSTEM_CONTROL_MODULE_BASE + 0x094) -#define GPMC_D4 (SYSTEM_CONTROL_MODULE_BASE + 0x096) -#define GPMC_D5 (SYSTEM_CONTROL_MODULE_BASE + 0x098) -#define GPMC_D6 (SYSTEM_CONTROL_MODULE_BASE + 0x09A) -#define GPMC_D7 (SYSTEM_CONTROL_MODULE_BASE + 0x09C) -#define GPMC_D8 (SYSTEM_CONTROL_MODULE_BASE + 0x09E) -#define GPMC_D9 (SYSTEM_CONTROL_MODULE_BASE + 0x0A0) -#define GPMC_D10 (SYSTEM_CONTROL_MODULE_BASE + 0x0A2) -#define GPMC_D11 (SYSTEM_CONTROL_MODULE_BASE + 0x0A4) -#define GPMC_D12 (SYSTEM_CONTROL_MODULE_BASE + 0x0A6) -#define GPMC_D13 (SYSTEM_CONTROL_MODULE_BASE + 0x0A8) -#define GPMC_D14 (SYSTEM_CONTROL_MODULE_BASE + 0x0AA) -#define GPMC_D15 (SYSTEM_CONTROL_MODULE_BASE + 0x0AC) -#define GPMC_NCS0 (SYSTEM_CONTROL_MODULE_BASE + 0x0AE) -#define GPMC_NCS1 (SYSTEM_CONTROL_MODULE_BASE + 0x0B0) -#define GPMC_NCS2 (SYSTEM_CONTROL_MODULE_BASE + 0x0B2) -#define GPMC_NCS3 (SYSTEM_CONTROL_MODULE_BASE + 0x0B4) -#define GPMC_NCS4 (SYSTEM_CONTROL_MODULE_BASE + 0x0B6) -#define GPMC_NCS5 (SYSTEM_CONTROL_MODULE_BASE + 0x0B8) -#define GPMC_NCS6 (SYSTEM_CONTROL_MODULE_BASE + 0x0BA) -#define GPMC_NCS7 (SYSTEM_CONTROL_MODULE_BASE + 0x0BC) -#define GPMC_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x0BE) -#define GPMC_NADV_ALE (SYSTEM_CONTROL_MODULE_BASE + 0x0C0) -#define GPMC_NOE (SYSTEM_CONTROL_MODULE_BASE + 0x0C2) -#define GPMC_NWE (SYSTEM_CONTROL_MODULE_BASE + 0x0C4) -#define GPMC_NBE0_CLE (SYSTEM_CONTROL_MODULE_BASE + 0x0C6) -#define GPMC_NBE1 (SYSTEM_CONTROL_MODULE_BASE + 0x0C8) -#define GPMC_NWP (SYSTEM_CONTROL_MODULE_BASE + 0x0CA) -#define GPMC_WAIT0 (SYSTEM_CONTROL_MODULE_BASE + 0x0CC) -#define GPMC_WAIT1 (SYSTEM_CONTROL_MODULE_BASE + 0x0CE) -#define GPMC_WAIT2 (SYSTEM_CONTROL_MODULE_BASE + 0x0D0) -#define GPMC_WAIT3 (SYSTEM_CONTROL_MODULE_BASE + 0x0D2) -#define DSS_PCLK (SYSTEM_CONTROL_MODULE_BASE + 0x0D4) -#define DSS_HSYNC (SYSTEM_CONTROL_MODULE_BASE + 0x0D6) -#define DSS_PSYNC (SYSTEM_CONTROL_MODULE_BASE + 0x0D8) -#define DSS_ACBIAS (SYSTEM_CONTROL_MODULE_BASE + 0x0DA) -#define DSS_DATA0 (SYSTEM_CONTROL_MODULE_BASE + 0x0DC) -#define DSS_DATA1 (SYSTEM_CONTROL_MODULE_BASE + 0x0DE) -#define DSS_DATA2 (SYSTEM_CONTROL_MODULE_BASE + 0x0E0) -#define DSS_DATA3 (SYSTEM_CONTROL_MODULE_BASE + 0x0E2) -#define DSS_DATA4 (SYSTEM_CONTROL_MODULE_BASE + 0x0E4) -#define DSS_DATA5 (SYSTEM_CONTROL_MODULE_BASE + 0x0E6) -#define DSS_DATA6 (SYSTEM_CONTROL_MODULE_BASE + 0x0E8) -#define DSS_DATA7 (SYSTEM_CONTROL_MODULE_BASE + 0x0EA) -#define DSS_DATA8 (SYSTEM_CONTROL_MODULE_BASE + 0x0EC) -#define DSS_DATA9 (SYSTEM_CONTROL_MODULE_BASE + 0x0EE) -#define DSS_DATA10 (SYSTEM_CONTROL_MODULE_BASE + 0x0F0) -#define DSS_DATA11 (SYSTEM_CONTROL_MODULE_BASE + 0x0F2) -#define DSS_DATA12 (SYSTEM_CONTROL_MODULE_BASE + 0x0F4) -#define DSS_DATA13 (SYSTEM_CONTROL_MODULE_BASE + 0x0F6) -#define DSS_DATA14 (SYSTEM_CONTROL_MODULE_BASE + 0x0F8) -#define DSS_DATA15 (SYSTEM_CONTROL_MODULE_BASE + 0x0FA) -#define DSS_DATA16 (SYSTEM_CONTROL_MODULE_BASE + 0x0FC) -#define DSS_DATA17 (SYSTEM_CONTROL_MODULE_BASE + 0x0FE) -#define DSS_DATA18 (SYSTEM_CONTROL_MODULE_BASE + 0x100) -#define DSS_DATA19 (SYSTEM_CONTROL_MODULE_BASE + 0x102) -#define DSS_DATA20 (SYSTEM_CONTROL_MODULE_BASE + 0x104) -#define DSS_DATA21 (SYSTEM_CONTROL_MODULE_BASE + 0x106) -#define DSS_DATA22 (SYSTEM_CONTROL_MODULE_BASE + 0x108) -#define DSS_DATA23 (SYSTEM_CONTROL_MODULE_BASE + 0x10A) -#define CAM_HS (SYSTEM_CONTROL_MODULE_BASE + 0x10C) -#define CAM_VS (SYSTEM_CONTROL_MODULE_BASE + 0x10E) -#define CAM_XCLKA (SYSTEM_CONTROL_MODULE_BASE + 0x110) -#define CAM_PCLK (SYSTEM_CONTROL_MODULE_BASE + 0x112) -#define CAM_FLD (SYSTEM_CONTROL_MODULE_BASE + 0x114) -#define CAM_D0 (SYSTEM_CONTROL_MODULE_BASE + 0x116) -#define CAM_D1 (SYSTEM_CONTROL_MODULE_BASE + 0x118) -#define CAM_D2 (SYSTEM_CONTROL_MODULE_BASE + 0x11A) -#define CAM_D3 (SYSTEM_CONTROL_MODULE_BASE + 0x11C) -#define CAM_D4 (SYSTEM_CONTROL_MODULE_BASE + 0x11E) -#define CAM_D5 (SYSTEM_CONTROL_MODULE_BASE + 0x120) -#define CAM_D6 (SYSTEM_CONTROL_MODULE_BASE + 0x122) -#define CAM_D7 (SYSTEM_CONTROL_MODULE_BASE + 0x124) -#define CAM_D8 (SYSTEM_CONTROL_MODULE_BASE + 0x126) -#define CAM_D9 (SYSTEM_CONTROL_MODULE_BASE + 0x128) -#define CAM_D10 (SYSTEM_CONTROL_MODULE_BASE + 0x12A) -#define CAM_D11 (SYSTEM_CONTROL_MODULE_BASE + 0x12C) -#define CAM_XCLKB (SYSTEM_CONTROL_MODULE_BASE + 0x12E) -#define CAM_WEN (SYSTEM_CONTROL_MODULE_BASE + 0x130) -#define CAM_STROBE (SYSTEM_CONTROL_MODULE_BASE + 0x132) -#define CSI2_DX0 (SYSTEM_CONTROL_MODULE_BASE + 0x134) -#define CSI2_DY0 (SYSTEM_CONTROL_MODULE_BASE + 0x136) -#define CSI2_DX1 (SYSTEM_CONTROL_MODULE_BASE + 0x138) -#define CSI2_DY1 (SYSTEM_CONTROL_MODULE_BASE + 0x13A) -#define MCBSP2_FSX (SYSTEM_CONTROL_MODULE_BASE + 0x13C) -#define MCBSP2_CLKX (SYSTEM_CONTROL_MODULE_BASE + 0x13E) -#define MCBSP2_DR (SYSTEM_CONTROL_MODULE_BASE + 0x140) -#define MCBSP2_DX (SYSTEM_CONTROL_MODULE_BASE + 0x142) -#define MMC1_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x144) -#define MMC1_CMD (SYSTEM_CONTROL_MODULE_BASE + 0x146) -#define MMC1_DAT0 (SYSTEM_CONTROL_MODULE_BASE + 0x148) -#define MMC1_DAT1 (SYSTEM_CONTROL_MODULE_BASE + 0x14A) -#define MMC1_DAT2 (SYSTEM_CONTROL_MODULE_BASE + 0x14C) -#define MMC1_DAT3 (SYSTEM_CONTROL_MODULE_BASE + 0x14E) -#define MMC1_DAT4 (SYSTEM_CONTROL_MODULE_BASE + 0x150) -#define MMC1_DAT5 (SYSTEM_CONTROL_MODULE_BASE + 0x152) -#define MMC1_DAT6 (SYSTEM_CONTROL_MODULE_BASE + 0x154) -#define MMC1_DAT7 (SYSTEM_CONTROL_MODULE_BASE + 0x156) -#define MMC2_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x158) -#define MMC2_CMD (SYSTEM_CONTROL_MODULE_BASE + 0x15A) -#define MMC2_DAT0 (SYSTEM_CONTROL_MODULE_BASE + 0x15C) -#define MMC2_DAT1 (SYSTEM_CONTROL_MODULE_BASE + 0x15E) -#define MMC2_DAT2 (SYSTEM_CONTROL_MODULE_BASE + 0x160) -#define MMC2_DAT3 (SYSTEM_CONTROL_MODULE_BASE + 0x162) -#define MMC2_DAT4 (SYSTEM_CONTROL_MODULE_BASE + 0x164) -#define MMC2_DAT5 (SYSTEM_CONTROL_MODULE_BASE + 0x166) -#define MMC2_DAT6 (SYSTEM_CONTROL_MODULE_BASE + 0x168) -#define MMC2_DAT7 (SYSTEM_CONTROL_MODULE_BASE + 0x16A) -#define MCBSP3_DX (SYSTEM_CONTROL_MODULE_BASE + 0x16C) -#define MCBSP3_DR (SYSTEM_CONTROL_MODULE_BASE + 0x16E) -#define MCBSP3_CLKX (SYSTEM_CONTROL_MODULE_BASE + 0x170) -#define MCBSP3_FSX (SYSTEM_CONTROL_MODULE_BASE + 0x172) -#define UART2_CTS (SYSTEM_CONTROL_MODULE_BASE + 0x174) -#define UART2_RTS (SYSTEM_CONTROL_MODULE_BASE + 0x176) -#define UART2_TX (SYSTEM_CONTROL_MODULE_BASE + 0x178) -#define UART2_RX (SYSTEM_CONTROL_MODULE_BASE + 0x17A) -#define UART1_TX (SYSTEM_CONTROL_MODULE_BASE + 0x17C) -#define UART1_RTS (SYSTEM_CONTROL_MODULE_BASE + 0x17E) -#define UART1_CTS (SYSTEM_CONTROL_MODULE_BASE + 0x180) -#define UART1_RX (SYSTEM_CONTROL_MODULE_BASE + 0x182) -#define MCBSP4_CLKX (SYSTEM_CONTROL_MODULE_BASE + 0x184) -#define MCBSP4_DR (SYSTEM_CONTROL_MODULE_BASE + 0x186) -#define MCBSP4_DX (SYSTEM_CONTROL_MODULE_BASE + 0x188) -#define MCBSP4_FSX (SYSTEM_CONTROL_MODULE_BASE + 0x18A) -#define MCBSP1_CLKR (SYSTEM_CONTROL_MODULE_BASE + 0x18C) -#define MCBSP1_FSR (SYSTEM_CONTROL_MODULE_BASE + 0x18E) -#define MCBSP1_DX (SYSTEM_CONTROL_MODULE_BASE + 0x190) -#define MCBSP1_DR (SYSTEM_CONTROL_MODULE_BASE + 0x192) -#define MCBSP1_CLKS (SYSTEM_CONTROL_MODULE_BASE + 0x194) -#define MCBSP1_FSX (SYSTEM_CONTROL_MODULE_BASE + 0x196) -#define MCBSP1_CLKX (SYSTEM_CONTROL_MODULE_BASE + 0x198) -#define UART3_CTS_RCTX (SYSTEM_CONTROL_MODULE_BASE + 0x19A) -#define UART3_RTS_SD (SYSTEM_CONTROL_MODULE_BASE + 0x19C) -#define UART3_RX_IRRX (SYSTEM_CONTROL_MODULE_BASE + 0x19E) -#define UART3_TX_IRTX (SYSTEM_CONTROL_MODULE_BASE + 0x1A0) -#define HSUSB0_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x1A2) -#define HSUSB0_STP (SYSTEM_CONTROL_MODULE_BASE + 0x1A4) -#define HSUSB0_DIR (SYSTEM_CONTROL_MODULE_BASE + 0x1A6) -#define HSUSB0_NXT (SYSTEM_CONTROL_MODULE_BASE + 0x1A8) -#define HSUSB0_DATA0 (SYSTEM_CONTROL_MODULE_BASE + 0x1AA) -#define HSUSB0_DATA1 (SYSTEM_CONTROL_MODULE_BASE + 0x1AC) -#define HSUSB0_DATA2 (SYSTEM_CONTROL_MODULE_BASE + 0x1AE) -#define HSUSB0_DATA3 (SYSTEM_CONTROL_MODULE_BASE + 0x1B0) -#define HSUSB0_DATA4 (SYSTEM_CONTROL_MODULE_BASE + 0x1B2) -#define HSUSB0_DATA5 (SYSTEM_CONTROL_MODULE_BASE + 0x1B4) -#define HSUSB0_DATA6 (SYSTEM_CONTROL_MODULE_BASE + 0x1B6) -#define HSUSB0_DATA7 (SYSTEM_CONTROL_MODULE_BASE + 0x1B8) -#define I2C1_SCL (SYSTEM_CONTROL_MODULE_BASE + 0x1BA) -#define I2C1_SDA (SYSTEM_CONTROL_MODULE_BASE + 0x1BC) -#define I2C2_SCL (SYSTEM_CONTROL_MODULE_BASE + 0x1BE) -#define I2C2_SDA (SYSTEM_CONTROL_MODULE_BASE + 0x1C0) -#define I2C3_SCL (SYSTEM_CONTROL_MODULE_BASE + 0x1C2) -#define I2C3_SDA (SYSTEM_CONTROL_MODULE_BASE + 0x1C4) -#define HDQ_SIO (SYSTEM_CONTROL_MODULE_BASE + 0x1C6) -#define MCSPI1_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x1C8) -#define MCSPI1_SIMO (SYSTEM_CONTROL_MODULE_BASE + 0x1CA) -#define MCSPI1_SOMI (SYSTEM_CONTROL_MODULE_BASE + 0x1CC) -#define MCSPI1_CS0 (SYSTEM_CONTROL_MODULE_BASE + 0x1CE) -#define MCSPI1_CS1 (SYSTEM_CONTROL_MODULE_BASE + 0x1D0) -#define MCSPI1_CS2 (SYSTEM_CONTROL_MODULE_BASE + 0x1D2) -#define MCSPI1_CS3 (SYSTEM_CONTROL_MODULE_BASE + 0x1D4) -#define MCSPI2_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x1D6) -#define MCSPI2_SIMO (SYSTEM_CONTROL_MODULE_BASE + 0x1D8) -#define MCSPI2_SOMI (SYSTEM_CONTROL_MODULE_BASE + 0x1DA) -#define MCSPI2_CS0 (SYSTEM_CONTROL_MODULE_BASE + 0x1DC) -#define MCSPI2_CS1 (SYSTEM_CONTROL_MODULE_BASE + 0x1DE) -#define SYS_NIRQ (SYSTEM_CONTROL_MODULE_BASE + 0x1E0) -#define SYS_CLKOUT2 (SYSTEM_CONTROL_MODULE_BASE + 0x1E2) -#define ETK_CLK (SYSTEM_CONTROL_MODULE_BASE + 0x5D8) -#define ETK_CTL (SYSTEM_CONTROL_MODULE_BASE + 0x5DA) -#define ETK_D0 (SYSTEM_CONTROL_MODULE_BASE + 0x5DC) -#define ETK_D1 (SYSTEM_CONTROL_MODULE_BASE + 0x5DE) -#define ETK_D2 (SYSTEM_CONTROL_MODULE_BASE + 0x5E0) -#define ETK_D3 (SYSTEM_CONTROL_MODULE_BASE + 0x5E2) -#define ETK_D4 (SYSTEM_CONTROL_MODULE_BASE + 0x5E4) -#define ETK_D5 (SYSTEM_CONTROL_MODULE_BASE + 0x5E6) -#define ETK_D6 (SYSTEM_CONTROL_MODULE_BASE + 0x5E8) -#define ETK_D7 (SYSTEM_CONTROL_MODULE_BASE + 0x5EA) -#define ETK_D8 (SYSTEM_CONTROL_MODULE_BASE + 0x5EC) -#define ETK_D9 (SYSTEM_CONTROL_MODULE_BASE + 0x5EE) -#define ETK_D10 (SYSTEM_CONTROL_MODULE_BASE + 0x5F0) -#define ETK_D11 (SYSTEM_CONTROL_MODULE_BASE + 0x5F2) -#define ETK_D12 (SYSTEM_CONTROL_MODULE_BASE + 0x5F4) -#define ETK_D13 (SYSTEM_CONTROL_MODULE_BASE + 0x5F6) -#define ETK_D14 (SYSTEM_CONTROL_MODULE_BASE + 0x5F8) -#define ETK_D15 (SYSTEM_CONTROL_MODULE_BASE + 0x5FA) -#define SYS_BOOT0 (SYSTEM_CONTROL_MODULE_BASE + 0xA0A) -#define SYS_BOOT1 (SYSTEM_CONTROL_MODULE_BASE + 0xA0C) -#define SYS_BOOT3 (SYSTEM_CONTROL_MODULE_BASE + 0xA10) -#define SYS_BOOT4 (SYSTEM_CONTROL_MODULE_BASE + 0xA12) -#define SYS_BOOT5 (SYSTEM_CONTROL_MODULE_BASE + 0xA14) -#define SYS_BOOT6 (SYSTEM_CONTROL_MODULE_BASE + 0xA16) - -//Mux modes -#define MUXMODE0 (0x0UL) -#define MUXMODE1 (0x1UL) -#define MUXMODE2 (0x2UL) -#define MUXMODE3 (0x3UL) -#define MUXMODE4 (0x4UL) -#define MUXMODE5 (0x5UL) -#define MUXMODE6 (0x6UL) -#define MUXMODE7 (0x7UL) - -//Pad configuration register. -#define PAD_CONFIG_MASK (0xFFFFUL) -#define MUXMODE_OFFSET 0 -#define MUXMODE_MASK (0x7UL << MUXMODE_OFFSET) -#define PULL_CONFIG_OFFSET 3 -#define PULL_CONFIG_MASK (0x3UL << PULL_CONFIG_OFFSET) -#define INPUTENABLE_OFFSET 8 -#define INPUTENABLE_MASK (0x1UL << INPUTENABLE_OFFSET) -#define OFFMODE_VALUE_OFFSET 9 -#define OFFMODE_VALUE_MASK (0x1FUL << OFFMODE_VALUE_OFFSET) -#define WAKEUP_OFFSET 14 -#define WAKEUP_MASK (0x2UL << WAKEUP_OFFSET) - -#define PULL_DOWN_SELECTED ((0x0UL << 1) | BIT0) -#define PULL_UP_SELECTED (BIT1 | BIT0) -#define PULL_DISABLED (0x0UL << 0) - -#define OUTPUT (0x0UL) //Pin is configured in output only mode. -#define INPUT (0x1UL) //Pin is configured in bi-directional mode. - -typedef struct { - UINTN Pin; - UINTN MuxMode; - UINTN PullConfig; - UINTN InputEnable; -} PAD_CONFIGURATION; - -#endif //__OMAP3530_PAD_CONFIGURATION_H__ diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h deleted file mode 100644 index 1871dbb12238..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h +++ /dev/null @@ -1,165 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530PRCM_H__ -#define __OMAP3530PRCM_H__ - -#define CM_FCLKEN1_CORE (0x48004A00) -#define CM_FCLKEN3_CORE (0x48004A08) -#define CM_ICLKEN1_CORE (0x48004A10) -#define CM_ICLKEN3_CORE (0x48004A18) -#define CM_CLKEN2_PLL (0x48004D04) -#define CM_CLKSEL4_PLL (0x48004D4C) -#define CM_CLKSEL5_PLL (0x48004D50) -#define CM_FCLKEN_USBHOST (0x48005400) -#define CM_ICLKEN_USBHOST (0x48005410) -#define CM_CLKSTST_USBHOST (0x4800544c) - -//Wakeup clock defintion -#define CM_FCLKEN_WKUP (0x48004C00) -#define CM_ICLKEN_WKUP (0x48004C10) - -//Peripheral clock definition -#define CM_FCLKEN_PER (0x48005000) -#define CM_ICLKEN_PER (0x48005010) -#define CM_CLKSEL_PER (0x48005040) - -//Reset management definition -#define PRM_RSTCTRL (0x48307250) -#define PRM_RSTST (0x48307258) - -//CORE clock -#define CM_FCLKEN1_CORE_EN_I2C1_MASK BIT15 -#define CM_FCLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15) -#define CM_FCLKEN1_CORE_EN_I2C1_ENABLE BIT15 - -#define CM_ICLKEN1_CORE_EN_I2C1_MASK BIT15 -#define CM_ICLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15) -#define CM_ICLKEN1_CORE_EN_I2C1_ENABLE BIT15 - -#define CM_FCLKEN1_CORE_EN_MMC1_MASK BIT24 -#define CM_FCLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24) -#define CM_FCLKEN1_CORE_EN_MMC1_ENABLE BIT24 - -#define CM_FCLKEN3_CORE_EN_USBTLL_MASK BIT2 -#define CM_FCLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2) -#define CM_FCLKEN3_CORE_EN_USBTLL_ENABLE BIT2 - -#define CM_ICLKEN1_CORE_EN_MMC1_MASK BIT24 -#define CM_ICLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24) -#define CM_ICLKEN1_CORE_EN_MMC1_ENABLE BIT24 - -#define CM_ICLKEN3_CORE_EN_USBTLL_MASK BIT2 -#define CM_ICLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2) -#define CM_ICLKEN3_CORE_EN_USBTLL_ENABLE BIT2 - -#define CM_CLKEN_FREQSEL_075_100 (0x03UL << 4) -#define CM_CLKEN_ENABLE (7UL << 0) - -#define CM_CLKSEL_PLL_MULT(x) (((x) & 0x07FF) << 8) -#define CM_CLKSEL_PLL_DIV(x) ((((x) - 1) & 0x7F) << 0) - -#define CM_CLKSEL_DIV_120M(x) (((x) & 0x1F) << 0) - -#define CM_FCLKEN_USBHOST_EN_USBHOST2_MASK BIT1 -#define CM_FCLKEN_USBHOST_EN_USBHOST2_DISABLE (0UL << 1) -#define CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE BIT1 - -#define CM_FCLKEN_USBHOST_EN_USBHOST1_MASK BIT0 -#define CM_FCLKEN_USBHOST_EN_USBHOST1_DISABLE (0UL << 0) -#define CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE BIT0 - -#define CM_ICLKEN_USBHOST_EN_USBHOST_MASK BIT0 -#define CM_ICLKEN_USBHOST_EN_USBHOST_DISABLE (0UL << 0) -#define CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE BIT0 - -//Wakeup functional clock -#define CM_FCLKEN_WKUP_EN_GPIO1_DISABLE (0UL << 3) -#define CM_FCLKEN_WKUP_EN_GPIO1_ENABLE BIT3 - -#define CM_FCLKEN_WKUP_EN_WDT2_DISABLE (0UL << 5) -#define CM_FCLKEN_WKUP_EN_WDT2_ENABLE BIT5 - -//Wakeup interface clock -#define CM_ICLKEN_WKUP_EN_GPIO1_DISABLE (0UL << 3) -#define CM_ICLKEN_WKUP_EN_GPIO1_ENABLE BIT3 - -#define CM_ICLKEN_WKUP_EN_WDT2_DISABLE (0UL << 5) -#define CM_ICLKEN_WKUP_EN_WDT2_ENABLE BIT5 - -//Peripheral functional clock -#define CM_FCLKEN_PER_EN_GPT3_DISABLE (0UL << 4) -#define CM_FCLKEN_PER_EN_GPT3_ENABLE BIT4 - -#define CM_FCLKEN_PER_EN_GPT4_DISABLE (0UL << 5) -#define CM_FCLKEN_PER_EN_GPT4_ENABLE BIT5 - -#define CM_FCLKEN_PER_EN_UART3_DISABLE (0UL << 11) -#define CM_FCLKEN_PER_EN_UART3_ENABLE BIT11 - -#define CM_FCLKEN_PER_EN_GPIO2_DISABLE (0UL << 13) -#define CM_FCLKEN_PER_EN_GPIO2_ENABLE BIT13 - -#define CM_FCLKEN_PER_EN_GPIO3_DISABLE (0UL << 14) -#define CM_FCLKEN_PER_EN_GPIO3_ENABLE BIT14 - -#define CM_FCLKEN_PER_EN_GPIO4_DISABLE (0UL << 15) -#define CM_FCLKEN_PER_EN_GPIO4_ENABLE BIT15 - -#define CM_FCLKEN_PER_EN_GPIO5_DISABLE (0UL << 16) -#define CM_FCLKEN_PER_EN_GPIO5_ENABLE BIT16 - -#define CM_FCLKEN_PER_EN_GPIO6_DISABLE (0UL << 17) -#define CM_FCLKEN_PER_EN_GPIO6_ENABLE BIT17 - -//Peripheral interface clock -#define CM_ICLKEN_PER_EN_GPT3_DISABLE (0UL << 4) -#define CM_ICLKEN_PER_EN_GPT3_ENABLE BIT4 - -#define CM_ICLKEN_PER_EN_GPT4_DISABLE (0UL << 5) -#define CM_ICLKEN_PER_EN_GPT4_ENABLE BIT5 - -#define CM_ICLKEN_PER_EN_UART3_DISABLE (0UL << 11) -#define CM_ICLKEN_PER_EN_UART3_ENABLE BIT11 - -#define CM_ICLKEN_PER_EN_GPIO2_DISABLE (0UL << 13) -#define CM_ICLKEN_PER_EN_GPIO2_ENABLE BIT13 - -#define CM_ICLKEN_PER_EN_GPIO3_DISABLE (0UL << 14) -#define CM_ICLKEN_PER_EN_GPIO3_ENABLE BIT14 - -#define CM_ICLKEN_PER_EN_GPIO4_DISABLE (0UL << 15) -#define CM_ICLKEN_PER_EN_GPIO4_ENABLE BIT15 - -#define CM_ICLKEN_PER_EN_GPIO5_DISABLE (0UL << 16) -#define CM_ICLKEN_PER_EN_GPIO5_ENABLE BIT16 - -#define CM_ICLKEN_PER_EN_GPIO6_DISABLE (0UL << 17) -#define CM_ICLKEN_PER_EN_GPIO6_ENABLE BIT17 - -//Timer source clock selection -#define CM_CLKSEL_PER_CLKSEL_GPT3_32K (0UL << 1) -#define CM_CLKSEL_PER_CLKSEL_GPT3_SYS BIT1 - -#define CM_CLKSEL_PER_CLKSEL_GPT4_32K (0UL << 2) -#define CM_CLKSEL_PER_CLKSEL_GPT4_SYS BIT2 - -//Reset management (Global and Cold reset) -#define RST_GS BIT1 -#define RST_DPLL3 BIT2 -#define GLOBAL_SW_RST BIT1 -#define GLOBAL_COLD_RST (0x0UL << 0) - -#endif // __OMAP3530PRCM_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h deleted file mode 100644 index d66da8dc0446..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h +++ /dev/null @@ -1,82 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530TIMER_H__ -#define __OMAP3530TIMER_H__ - -#define GPTIMER1_BASE (0x48313000) -#define GPTIMER2_BASE (0x49032000) -#define GPTIMER3_BASE (0x49034000) -#define GPTIMER4_BASE (0x49036000) -#define GPTIMER5_BASE (0x49038000) -#define GPTIMER6_BASE (0x4903A000) -#define GPTIMER7_BASE (0x4903C000) -#define GPTIMER8_BASE (0x4903E000) -#define GPTIMER9_BASE (0x49040000) -#define GPTIMER10_BASE (0x48086000) -#define GPTIMER11_BASE (0x48088000) -#define GPTIMER12_BASE (0x48304000) -#define WDTIMER2_BASE (0x48314000) - -#define GPTIMER_TIOCP_CFG (0x0010) -#define GPTIMER_TISTAT (0x0014) -#define GPTIMER_TISR (0x0018) -#define GPTIMER_TIER (0x001C) -#define GPTIMER_TWER (0x0020) -#define GPTIMER_TCLR (0x0024) -#define GPTIMER_TCRR (0x0028) -#define GPTIMER_TLDR (0x002C) -#define GPTIMER_TTGR (0x0030) -#define GPTIMER_TWPS (0x0034) -#define GPTIMER_TMAR (0x0038) -#define GPTIMER_TCAR1 (0x003C) -#define GPTIMER_TSICR (0x0040) -#define GPTIMER_TCAR2 (0x0044) -#define GPTIMER_TPIR (0x0048) -#define GPTIMER_TNIR (0x004C) -#define GPTIMER_TCVR (0x0050) -#define GPTIMER_TOCR (0x0054) -#define GPTIMER_TOWR (0x0058) - -#define WSPR (0x048) - -#define TISR_TCAR_IT_FLAG_MASK BIT2 -#define TISR_OVF_IT_FLAG_MASK BIT1 -#define TISR_MAT_IT_FLAG_MASK BIT0 -#define TISR_ALL_INTERRUPT_MASK (TISR_TCAR_IT_FLAG_MASK | TISR_OVF_IT_FLAG_MASK | TISR_MAT_IT_FLAG_MASK) - -#define TISR_TCAR_IT_FLAG_NOT_PENDING (0UL << 2) -#define TISR_OVF_IT_FLAG_NOT_PENDING (0UL << 1) -#define TISR_MAT_IT_FLAG_NOT_PENDING (0UL << 0) -#define TISR_NO_INTERRUPTS_PENDING (TISR_TCAR_IT_FLAG_NOT_PENDING | TISR_OVF_IT_FLAG_NOT_PENDING | TISR_MAT_IT_FLAG_NOT_PENDING) - -#define TISR_TCAR_IT_FLAG_CLEAR BIT2 -#define TISR_OVF_IT_FLAG_CLEAR BIT1 -#define TISR_MAT_IT_FLAG_CLEAR BIT0 -#define TISR_CLEAR_ALL (TISR_TCAR_IT_FLAG_CLEAR | TISR_OVF_IT_FLAG_CLEAR | TISR_MAT_IT_FLAG_CLEAR) - -#define TCLR_AR_AUTORELOAD BIT1 -#define TCLR_AR_ONESHOT (0UL << 1) -#define TCLR_ST_ON BIT0 -#define TCLR_ST_OFF (0UL << 0) - -#define TIER_TCAR_IT_ENABLE (BIT2 -#define TIER_TCAR_IT_DISABLE (0UL << 2) -#define TIER_OVF_IT_ENABLE BIT1 -#define TIER_OVF_IT_DISABLE (0UL << 1) -#define TIER_MAT_IT_ENABLE BIT0 -#define TIER_MAT_IT_DISABLE (0UL << 0) - -#endif // __OMAP3530TIMER_H__ - diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h deleted file mode 100644 index 62cbe3070edc..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h +++ /dev/null @@ -1,54 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530UART_H__ -#define __OMAP3530UART_H__ - -#define UART1_BASE (0x4806A000) -#define UART2_BASE (0x4806C000) -#define UART3_BASE (0x49020000) - -#define UART_DLL_REG (0x0000) -#define UART_RBR_REG (0x0000) -#define UART_THR_REG (0x0000) -#define UART_DLH_REG (0x0004) -#define UART_FCR_REG (0x0008) -#define UART_LCR_REG (0x000C) -#define UART_MCR_REG (0x0010) -#define UART_LSR_REG (0x0014) -#define UART_MDR1_REG (0x0020) - -#define UART_FCR_TX_FIFO_CLEAR BIT2 -#define UART_FCR_RX_FIFO_CLEAR BIT1 -#define UART_FCR_FIFO_ENABLE BIT0 - -#define UART_LCR_DIV_EN_ENABLE BIT7 -#define UART_LCR_DIV_EN_DISABLE (0UL << 7) -#define UART_LCR_CHAR_LENGTH_8 (BIT1 | BIT0) - -#define UART_MCR_RTS_FORCE_ACTIVE BIT1 -#define UART_MCR_DTR_FORCE_ACTIVE BIT0 - -#define UART_LSR_TX_FIFO_E_MASK BIT5 -#define UART_LSR_TX_FIFO_E_NOT_EMPTY (0UL << 5) -#define UART_LSR_TX_FIFO_E_EMPTY BIT5 -#define UART_LSR_RX_FIFO_E_MASK BIT0 -#define UART_LSR_RX_FIFO_E_NOT_EMPTY BIT0 -#define UART_LSR_RX_FIFO_E_EMPTY (0UL << 0) - -// BIT2:BIT0 -#define UART_MDR1_MODE_SELECT_DISABLE (7UL) -#define UART_MDR1_MODE_SELECT_UART_16X (0UL) - -#endif // __OMAP3530UART_H__ diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h deleted file mode 100644 index 5d64cafc577d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3530USB_H__ -#define __OMAP3530USB_H__ - -#define USB_BASE (0x48060000) - -#define UHH_SYSCONFIG (USB_BASE + 0x4010) -#define UHH_HOSTCONFIG (USB_BASE + 0x4040) -#define UHH_SYSSTATUS (USB_BASE + 0x4014) - -#define USB_EHCI_HCCAPBASE (USB_BASE + 0x4800) - -#define UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY BIT12 -#define UHH_SYSCONFIG_CLOCKACTIVITY_ON BIT8 -#define UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY BIT3 -#define UHH_SYSCONFIG_ENAWAKEUP_ENABLE BIT2 -#define UHH_SYSCONFIG_SOFTRESET BIT1 -#define UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN (0UL << 0) - -#define UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT (0UL << 10) -#define UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT (0UL << 9) -#define UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT (0UL << 8) -#define UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE (0UL << 5) -#define UHH_HOSTCONFIG_ENA_INCR16_ENABLE BIT4 -#define UHH_HOSTCONFIG_ENA_INCR8_ENABLE BIT3 -#define UHH_HOSTCONFIG_ENA_INCR4_ENABLE BIT2 -#define UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON (0UL << 1) -#define UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE (0UL << 0) - -#define UHH_SYSSTATUS_RESETDONE (BIT0 | BIT1 | BIT2) - -#endif // __OMAP3530USB_H__ - - - diff --git a/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h b/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h deleted file mode 100644 index 1db8b6db4617..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h +++ /dev/null @@ -1,80 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __TPS65950_H__ -#define __TPS65950_H__ - -#define EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(x) (((x) >> 8) & 0xFF) -#define EXTERNAL_DEVICE_REGISTER_TO_REGISTER(x) ((x) & 0xFF) -#define EXTERNAL_DEVICE_REGISTER(SlaveAddress, Register) (((SlaveAddress) & 0xFF) << 8 | ((Register) & 0xFF)) - -// I2C Address group -#define I2C_ADDR_GRP_ID1 0x48 -#define I2C_ADDR_GRP_ID2 0x49 -#define I2C_ADDR_GRP_ID3 0x4A -#define I2C_ADDR_GRP_ID4 0x4B -#define I2C_ADDR_GRP_ID5 0x12 - -// MMC definitions. -#define VMMC1_DEV_GRP 0x82 -#define DEV_GRP_P1 BIT5 - -#define VMMC1_DEDICATED_REG 0x85 -#define VSEL_1_85V 0x0 -#define VSEL_2_85V 0x1 -#define VSEL_3_00V 0x2 -#define VSEL_3_15V 0x3 - -#define TPS65950_GPIO_CTRL 0xaa //I2C_ADDR_GRP_ID2 -#define CARD_DETECT_ENABLE (BIT2 | BIT0) // GPIO ON + GPIO CD1 enabled - - -#define GPIODATAIN1 0x98 //I2C_ADDR_GRP_ID2 -#define CARD_DETECT_BIT BIT0 - -// LEDEN register -#define LEDEN 0xEE -#define LEDAON BIT0 -#define LEDBON BIT1 -#define LEDAPWM BIT4 -#define LEDBPWM BIT5 - -// RTC registers -#define SECONDS_REG 0x1C -#define MINUTES_REG 0x1D -#define HOURS_REG 0x1E -#define DAYS_REG 0x1F -#define MONTHS_REG 0x20 -#define YEARS_REG 0x21 -#define WEEKS_REG 0x22 -#define RTC_CTRL_REG 0x29 - -// USB PHY power -#define VAUX2_DEDICATED 0x79 -#define VAUX2_DEV_GRP 0x76 - -#define VAUX_DEV_GRP_NONE 0x00 -#define VAUX_DEV_GRP_P1 0x20 -#define VAUX_DEV_GRP_P2 0x40 -#define VAUX_DEV_GRP_P3 0x80 -#define VAUX_DEDICATED_18V 0x05 - -// Display subsystem -#define VPLL2_DEDICATED 0x91 -#define VPLL2_DEV_GRP 0x8E - -#define GPIODATADIR1 0x9B -#define SETGPIODATAOUT1 0xA4 - -#endif //__TPS65950_H__ diff --git a/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c b/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c deleted file mode 100644 index 09e22b5921b0..000000000000 --- a/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c +++ /dev/null @@ -1,357 +0,0 @@ -/** @file - Handle OMAP35xx interrupt controller - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -// -// Notifications -// -EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL; - - -HARDWARE_INTERRUPT_HANDLER gRegisteredInterruptHandlers[INT_NROF_VECTORS]; - -/** - Shutdown our hardware - - DXE Core will disable interrupts and turn off the timer and disable interrupts - after all the event handlers have run. - - @param[in] Event The Event that is being processed - @param[in] Context Event Context -**/ -VOID -EFIAPI -ExitBootServicesEvent ( - IN EFI_EVENT Event, - IN VOID *Context - ) -{ - // Disable all interrupts - MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF); - MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF); - MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF); - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - - // Add code here to disable all FIQs as debugger may have turned one on -} - -/** - Register Handler for the specified interrupt source. - - @param This Instance pointer for this protocol - @param Source Hardware source of the interrupt - @param Handler Callback for interrupt. NULL to unregister - - @retval EFI_SUCCESS Source was updated to support Handler. - @retval EFI_DEVICE_ERROR Hardware could not be programmed. - -**/ -EFI_STATUS -EFIAPI -RegisterInterruptSource ( - IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This, - IN HARDWARE_INTERRUPT_SOURCE Source, - IN HARDWARE_INTERRUPT_HANDLER Handler - ) -{ - if (Source > MAX_VECTOR) { - ASSERT(FALSE); - return EFI_UNSUPPORTED; - } - - if ((MmioRead32 (INTCPS_ILR(Source)) & INTCPS_ILR_FIQ) == INTCPS_ILR_FIQ) { - // This vector has been programmed as FIQ so we can't use it for IRQ - // EFI does not use FIQ, but the debugger can use it to check for - // ctrl-c. So this ASSERT means you have a conflict with the debug agent - ASSERT (FALSE); - return EFI_UNSUPPORTED; - } - - if ((Handler == NULL) && (gRegisteredInterruptHandlers[Source] == NULL)) { - return EFI_INVALID_PARAMETER; - } - - if ((Handler != NULL) && (gRegisteredInterruptHandlers[Source] != NULL)) { - return EFI_ALREADY_STARTED; - } - - gRegisteredInterruptHandlers[Source] = Handler; - return This->EnableInterruptSource(This, Source); -} - - -/** - Enable interrupt source Source. - - @param This Instance pointer for this protocol - @param Source Hardware source of the interrupt - - @retval EFI_SUCCESS Source interrupt enabled. - @retval EFI_DEVICE_ERROR Hardware could not be programmed. - -**/ -EFI_STATUS -EFIAPI -EnableInterruptSource ( - IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This, - IN HARDWARE_INTERRUPT_SOURCE Source - ) -{ - UINTN Bank; - UINTN Bit; - - if (Source > MAX_VECTOR) { - ASSERT(FALSE); - return EFI_UNSUPPORTED; - } - - Bank = Source / 32; - Bit = 1UL << (Source % 32); - - MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit); - - return EFI_SUCCESS; -} - - -/** - Disable interrupt source Source. - - @param This Instance pointer for this protocol - @param Source Hardware source of the interrupt - - @retval EFI_SUCCESS Source interrupt disabled. - @retval EFI_DEVICE_ERROR Hardware could not be programmed. - -**/ -EFI_STATUS -EFIAPI -DisableInterruptSource ( - IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This, - IN HARDWARE_INTERRUPT_SOURCE Source - ) -{ - UINTN Bank; - UINTN Bit; - - if (Source > MAX_VECTOR) { - ASSERT(FALSE); - return EFI_UNSUPPORTED; - } - - Bank = Source / 32; - Bit = 1UL << (Source % 32); - - MmioWrite32 (INTCPS_MIR_SET(Bank), Bit); - - return EFI_SUCCESS; -} - - - -/** - Return current state of interrupt source Source. - - @param This Instance pointer for this protocol - @param Source Hardware source of the interrupt - @param InterruptState TRUE: source enabled, FALSE: source disabled. - - @retval EFI_SUCCESS InterruptState is valid - @retval EFI_DEVICE_ERROR InterruptState is not valid - -**/ -EFI_STATUS -EFIAPI -GetInterruptSourceState ( - IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This, - IN HARDWARE_INTERRUPT_SOURCE Source, - IN BOOLEAN *InterruptState - ) -{ - UINTN Bank; - UINTN Bit; - - if (InterruptState == NULL) { - return EFI_INVALID_PARAMETER; - } - - if (Source > MAX_VECTOR) { - ASSERT(FALSE); - return EFI_UNSUPPORTED; - } - - Bank = Source / 32; - Bit = 1UL << (Source % 32); - - if ((MmioRead32(INTCPS_MIR(Bank)) & Bit) == Bit) { - *InterruptState = FALSE; - } else { - *InterruptState = TRUE; - } - - return EFI_SUCCESS; -} - -/** - Signal to the hardware that the End Of Intrrupt state - has been reached. - - @param This Instance pointer for this protocol - @param Source Hardware source of the interrupt - - @retval EFI_SUCCESS Source interrupt EOI'ed. - @retval EFI_DEVICE_ERROR Hardware could not be programmed. - -**/ -EFI_STATUS -EFIAPI -EndOfInterrupt ( - IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This, - IN HARDWARE_INTERRUPT_SOURCE Source - ) -{ - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - ArmDataSynchronizationBarrier (); - return EFI_SUCCESS; -} - - -/** - EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs. - - @param InterruptType Defines the type of interrupt or exception that - occurred on the processor.This parameter is processor architecture specific. - @param SystemContext A pointer to the processor context when - the interrupt occurred on the processor. - - @return None - -**/ -VOID -EFIAPI -IrqInterruptHandler ( - IN EFI_EXCEPTION_TYPE InterruptType, - IN EFI_SYSTEM_CONTEXT SystemContext - ) -{ - UINT32 Vector; - HARDWARE_INTERRUPT_HANDLER InterruptHandler; - - Vector = MmioRead32 (INTCPS_SIR_IRQ) & INTCPS_SIR_IRQ_MASK; - - // Needed to prevent infinite nesting when Time Driver lowers TPL - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - ArmDataSynchronizationBarrier (); - - InterruptHandler = gRegisteredInterruptHandlers[Vector]; - if (InterruptHandler != NULL) { - // Call the registered interrupt handler. - InterruptHandler (Vector, SystemContext); - } - - // Needed to clear after running the handler - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - ArmDataSynchronizationBarrier (); -} - -// -// Making this global saves a few bytes in image size -// -EFI_HANDLE gHardwareInterruptHandle = NULL; - -// -// The protocol instance produced by this driver -// -EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = { - RegisterInterruptSource, - EnableInterruptSource, - DisableInterruptSource, - GetInterruptSourceState, - EndOfInterrupt -}; - -/** - Initialize the state information for the CPU Architectural Protocol - - @param ImageHandle of the loaded driver - @param SystemTable Pointer to the System Table - - @retval EFI_SUCCESS Protocol registered - @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure - @retval EFI_DEVICE_ERROR Hardware problems - -**/ -EFI_STATUS -InterruptDxeInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - EFI_CPU_ARCH_PROTOCOL *Cpu; - - // Make sure the Interrupt Controller Protocol is not already installed in the system. - ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid); - - // Make sure all interrupts are disabled by default. - MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF); - MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF); - MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF); - MmioOr32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - - Status = gBS->InstallMultipleProtocolInterfaces(&gHardwareInterruptHandle, - &gHardwareInterruptProtocolGuid, &gHardwareInterruptProtocol, - NULL); - ASSERT_EFI_ERROR(Status); - - // - // Get the CPU protocol that this driver requires. - // - Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu); - ASSERT_EFI_ERROR(Status); - - // - // Unregister the default exception handler. - // - Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, NULL); - ASSERT_EFI_ERROR(Status); - - // - // Register to receive interrupts - // - Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, IrqInterruptHandler); - ASSERT_EFI_ERROR(Status); - - // Register for an ExitBootServicesEvent - Status = gBS->CreateEvent(EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent); - ASSERT_EFI_ERROR(Status); - - return Status; -} - diff --git a/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf b/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf deleted file mode 100644 index 76276dd3601d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf +++ /dev/null @@ -1,54 +0,0 @@ -#/** @file -# -# Interrupt DXE driver -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = Omap35xxBoardInterruptDxe - FILE_GUID = 23eed05d-1b93-4a1a-8e1b-931d69e37952 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = InterruptDxeInitialize - - -[Sources.common] - HardwareInterrupt.c - - -[Packages] - ArmPkg/ArmPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[LibraryClasses] - BaseLib - UefiLib - UefiBootServicesTableLib - DebugLib - PrintLib - UefiDriverEntryPoint - IoLib - ArmLib - -[Protocols] - gHardwareInterruptProtocolGuid - gEfiCpuArchProtocolGuid - -[FixedPcd.common] - gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress - -[Depex] - gEfiCpuArchProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c deleted file mode 100644 index 418328afe496..000000000000 --- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c +++ /dev/null @@ -1,445 +0,0 @@ -/** @file - - Copyright (c) 2011, ARM Ltd. All rights reserved.
- This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - - **/ - -#include -#include -#include -#include -#include -#include - -#include - -#include "LcdGraphicsOutputDxe.h" - -extern BOOLEAN mDisplayInitialized; - -// -// Function Definitions -// - -STATIC -EFI_STATUS -VideoCopyNoHorizontalOverlap ( - IN UINTN BitsPerPixel, - IN volatile VOID *FrameBufferBase, - IN UINT32 HorizontalResolution, - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height - ) -{ - EFI_STATUS Status = EFI_SUCCESS; - UINTN SourceLine; - UINTN DestinationLine; - UINTN WidthInBytes; - UINTN LineCount; - INTN Step; - VOID *SourceAddr; - VOID *DestinationAddr; - - if( DestinationY <= SourceY ) { - // scrolling up (or horizontally but without overlap) - SourceLine = SourceY; - DestinationLine = DestinationY; - Step = 1; - } else { - // scrolling down - SourceLine = SourceY + Height; - DestinationLine = DestinationY + Height; - Step = -1; - } - - WidthInBytes = Width * 2; - - for( LineCount = 0; LineCount < Height; LineCount++ ) { - // Update the start addresses of source & destination using 16bit pointer arithmetic - SourceAddr = (VOID *)((UINT16 *)FrameBufferBase + SourceLine * HorizontalResolution + SourceX ); - DestinationAddr = (VOID *)((UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution + DestinationX); - - // Copy the entire line Y from video ram to the temp buffer - CopyMem( DestinationAddr, SourceAddr, WidthInBytes); - - // Update the line numbers - SourceLine += Step; - DestinationLine += Step; - } - - return Status; -} - -STATIC -EFI_STATUS -VideoCopyHorizontalOverlap ( - IN UINTN BitsPerPixel, - IN volatile VOID *FrameBufferBase, - UINT32 HorizontalResolution, - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height - ) -{ - EFI_STATUS Status = EFI_SUCCESS; - - UINT16 *PixelBuffer16bit; - UINT16 *SourcePixel16bit; - UINT16 *DestinationPixel16bit; - - UINT32 SourcePixelY; - UINT32 DestinationPixelY; - UINTN SizeIn16Bits; - - // Allocate a temporary buffer - PixelBuffer16bit = (UINT16 *) AllocatePool((Height * Width) * sizeof(UINT16)); - - if (PixelBuffer16bit == NULL) { - Status = EFI_OUT_OF_RESOURCES; - goto EXIT; - } - - // Access each pixel inside the source area of the Video Memory and copy it to the temp buffer - - SizeIn16Bits = Width * 2; - - for (SourcePixelY = SourceY, DestinationPixel16bit = PixelBuffer16bit; - SourcePixelY < SourceY + Height; - SourcePixelY++, DestinationPixel16bit += Width) - { - // Calculate the source address: - SourcePixel16bit = (UINT16 *)FrameBufferBase + SourcePixelY * HorizontalResolution + SourceX; - - // Copy the entire line Y from Video to the temp buffer - CopyMem( (VOID *)DestinationPixel16bit, (CONST VOID *)SourcePixel16bit, SizeIn16Bits); - } - - // Copy from the temp buffer into the destination area of the Video Memory - - for (DestinationPixelY = DestinationY, SourcePixel16bit = PixelBuffer16bit; - DestinationPixelY < DestinationY + Height; - DestinationPixelY++, SourcePixel16bit += Width) - { - // Calculate the target address: - DestinationPixel16bit = (UINT16 *)FrameBufferBase + (DestinationPixelY * HorizontalResolution + DestinationX); - - // Copy the entire line Y from the temp buffer to Video - CopyMem( (VOID *)DestinationPixel16bit, (CONST VOID *)SourcePixel16bit, SizeIn16Bits); - } - - // Free the allocated memory - FreePool((VOID *) PixelBuffer16bit); - - -EXIT: - return Status; -} - -STATIC -EFI_STATUS -BltVideoFill ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *EfiSourcePixel, OPTIONAL - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer - ) -{ - EFI_PIXEL_BITMASK* PixelInformation; - EFI_STATUS Status; - UINT32 HorizontalResolution; - VOID *FrameBufferBase; - UINT16 *DestinationPixel16bit; - UINT16 Pixel16bit; - UINT32 DestinationPixelX; - UINT32 DestinationLine; - - Status = EFI_SUCCESS; - PixelInformation = &This->Mode->Info->PixelInformation; - FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase)); - HorizontalResolution = This->Mode->Info->HorizontalResolution; - - // Convert the EFI pixel at the start of the BltBuffer(0,0) into a video display pixel - Pixel16bit = (UINT16) ( - ( (EfiSourcePixel->Red << 8) & PixelInformation->RedMask ) - | ( (EfiSourcePixel->Green << 3) & PixelInformation->GreenMask ) - | ( (EfiSourcePixel->Blue >> 3) & PixelInformation->BlueMask ) - ); - - // Copy the SourcePixel into every pixel inside the target rectangle - for (DestinationLine = DestinationY; - DestinationLine < DestinationY + Height; - DestinationLine++) - { - for (DestinationPixelX = DestinationX; - DestinationPixelX < DestinationX + Width; - DestinationPixelX++) - { - // Calculate the target address: - DestinationPixel16bit = (UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution + DestinationPixelX; - - // Copy the pixel into the new target - *DestinationPixel16bit = Pixel16bit; - } - } - - - return Status; -} - -STATIC -EFI_STATUS -BltVideoToBltBuffer ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer - ) -{ - EFI_STATUS Status; - UINT32 HorizontalResolution; - EFI_PIXEL_BITMASK *PixelInformation; - EFI_GRAPHICS_OUTPUT_BLT_PIXEL *EfiDestinationPixel; - VOID *FrameBufferBase; - UINT16 *SourcePixel16bit; - UINT16 Pixel16bit; - UINT32 SourcePixelX; - UINT32 SourceLine; - UINT32 DestinationPixelX; - UINT32 DestinationLine; - UINT32 BltBufferHorizontalResolution; - - Status = EFI_SUCCESS; - PixelInformation = &This->Mode->Info->PixelInformation; - HorizontalResolution = This->Mode->Info->HorizontalResolution; - FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase)); - - if(( Delta != 0 ) && ( Delta != Width * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL))) { - // Delta is not zero and it is different from the width. - // Divide it by the size of a pixel to find out the buffer's horizontal resolution. - BltBufferHorizontalResolution = (UINT32) (Delta / sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)); - } else { - BltBufferHorizontalResolution = Width; - } - - // Access each pixel inside the Video Memory - for (SourceLine = SourceY, DestinationLine = DestinationY; - SourceLine < SourceY + Height; - SourceLine++, DestinationLine++) - { - for (SourcePixelX = SourceX, DestinationPixelX = DestinationX; - SourcePixelX < SourceX + Width; - SourcePixelX++, DestinationPixelX++) - { - // Calculate the source and target addresses: - SourcePixel16bit = (UINT16 *)FrameBufferBase + SourceLine * HorizontalResolution + SourcePixelX; - EfiDestinationPixel = BltBuffer + DestinationLine * BltBufferHorizontalResolution + DestinationPixelX; - - // Snapshot the pixel from the video buffer once, to speed up the operation. - // If we were dereferencing the pointer, as it is volatile, we would perform 3 memory read operations. - Pixel16bit = *SourcePixel16bit; - - // Copy the pixel into the new target - EfiDestinationPixel->Red = (UINT8) ( (Pixel16bit & PixelInformation->RedMask ) >> 8 ); - EfiDestinationPixel->Green = (UINT8) ( (Pixel16bit & PixelInformation->GreenMask ) >> 3 ); - EfiDestinationPixel->Blue = (UINT8) ( (Pixel16bit & PixelInformation->BlueMask ) << 3 ); - } - } - - return Status; -} - -STATIC -EFI_STATUS -BltBufferToVideo ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer - ) -{ - EFI_STATUS Status; - UINT32 HorizontalResolution; - EFI_PIXEL_BITMASK *PixelInformation; - EFI_GRAPHICS_OUTPUT_BLT_PIXEL *EfiSourcePixel; - VOID *FrameBufferBase; - UINT16 *DestinationPixel16bit; - UINT32 SourcePixelX; - UINT32 SourceLine; - UINT32 DestinationPixelX; - UINT32 DestinationLine; - UINT32 BltBufferHorizontalResolution; - - Status = EFI_SUCCESS; - PixelInformation = &This->Mode->Info->PixelInformation; - HorizontalResolution = This->Mode->Info->HorizontalResolution; - FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase)); - - if(( Delta != 0 ) && ( Delta != Width * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL))) { - // Delta is not zero and it is different from the width. - // Divide it by the size of a pixel to find out the buffer's horizontal resolution. - BltBufferHorizontalResolution = (UINT32) (Delta / sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)); - } else { - BltBufferHorizontalResolution = Width; - } - - // Access each pixel inside the BltBuffer Memory - for (SourceLine = SourceY, DestinationLine = DestinationY; - SourceLine < SourceY + Height; - SourceLine++, DestinationLine++) { - - for (SourcePixelX = SourceX, DestinationPixelX = DestinationX; - SourcePixelX < SourceX + Width; - SourcePixelX++, DestinationPixelX++) - { - // Calculate the source and target addresses: - EfiSourcePixel = BltBuffer + SourceLine * BltBufferHorizontalResolution + SourcePixelX; - DestinationPixel16bit = (UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution + DestinationPixelX; - - // Copy the pixel into the new target - // Only the most significant bits will be copied across: - // To convert from 8 bits to 5 bits per pixel we throw away the 3 least significant bits - *DestinationPixel16bit = (UINT16) ( - ( (EfiSourcePixel->Red << 8) & PixelInformation->RedMask ) - | ( (EfiSourcePixel->Green << 3) & PixelInformation->GreenMask ) - | ( (EfiSourcePixel->Blue >> 3) & PixelInformation->BlueMask ) - ); - } - } - - return Status; -} - -STATIC -EFI_STATUS -BltVideoToVideo ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer - ) -{ - EFI_STATUS Status; - UINT32 HorizontalResolution; - UINTN BitsPerPixel; - VOID *FrameBufferBase; - - BitsPerPixel = 16; - - HorizontalResolution = This->Mode->Info->HorizontalResolution; - FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase)); - - // - // BltVideo to BltVideo: - // - // Source is the Video Memory, - // Destination is the Video Memory - - FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase)); - - // The UEFI spec currently states: - // "There is no limitation on the overlapping of the source and destination rectangles" - // Therefore, we must be careful to avoid overwriting the source data - if( SourceY == DestinationY ) { - // Copying within the same height, e.g. horizontal shift - if( SourceX == DestinationX ) { - // Nothing to do - Status = EFI_SUCCESS; - } else if( ((SourceX>DestinationX)?(SourceX - DestinationX):(DestinationX - SourceX)) < Width ) { - // There is overlap - Status = VideoCopyHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height ); - } else { - // No overlap - Status = VideoCopyNoHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height ); - } - } else { - // Copying from different heights - Status = VideoCopyNoHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height ); - } - - return Status; -} - -EFI_STATUS -EFIAPI -LcdGraphicsBlt ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL - IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation, - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer - ) -{ - EFI_STATUS Status; - LCD_INSTANCE *Instance; - - Instance = LCD_INSTANCE_FROM_GOP_THIS(This); - - if (!mDisplayInitialized) { - InitializeDisplay (Instance); - } - - switch (BltOperation) { - case EfiBltVideoFill: - Status = BltVideoFill (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta); - break; - - case EfiBltVideoToBltBuffer: - Status = BltVideoToBltBuffer (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta); - break; - - case EfiBltBufferToVideo: - Status = BltBufferToVideo (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta); - break; - - case EfiBltVideoToVideo: - Status = BltVideoToVideo (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta); - break; - - case EfiGraphicsOutputBltOperationMax: - default: - DEBUG((DEBUG_ERROR, "LcdGraphicsBlt: Invalid Operation\n")); - Status = EFI_INVALID_PARAMETER; - break; -} - - return Status; -} diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c deleted file mode 100644 index 4364dd71a02b..000000000000 --- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c +++ /dev/null @@ -1,400 +0,0 @@ -/** @file - - Copyright (c) 2011-2014, ARM Ltd. All rights reserved.
- This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "LcdGraphicsOutputDxe.h" - -BOOLEAN mDisplayInitialized = FALSE; - -LCD_MODE LcdModes[] = { - { - 0, 640, 480, - 9, 4, - 96, 16, 48, - 2, 10, 33 - }, - { - 1, 800, 600, - 11, 2, - 120, 56, 64, - 5, 37, 22 - }, - { - 2, 1024, 768, - 6, 2, - 96, 16, 48, - 2, 10, 33 - }, -}; - -LCD_INSTANCE mLcdTemplate = { - LCD_INSTANCE_SIGNATURE, - NULL, // Handle - { // ModeInfo - 0, // Version - 0, // HorizontalResolution - 0, // VerticalResolution - PixelBltOnly, // PixelFormat - { - 0xF800, //RedMask; - 0x7E0, //GreenMask; - 0x1F, //BlueMask; - 0x0//ReservedMask - }, // PixelInformation - 0, // PixelsPerScanLine - }, - { // Mode - 3, // MaxMode; - 0, // Mode; - NULL, // Info; - 0, // SizeOfInfo; - 0, // FrameBufferBase; - 0 // FrameBufferSize; - }, - { // Gop - LcdGraphicsQueryMode, // QueryMode - LcdGraphicsSetMode, // SetMode - LcdGraphicsBlt, // Blt - NULL // *Mode - }, - { // DevicePath - { - { - HARDWARE_DEVICE_PATH, HW_VENDOR_DP, - { (UINT8) (sizeof(VENDOR_DEVICE_PATH)), (UINT8) ((sizeof(VENDOR_DEVICE_PATH)) >> 8) }, - }, - // Hardware Device Path for Lcd - EFI_CALLER_ID_GUID // Use the driver's GUID - }, - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { sizeof(EFI_DEVICE_PATH_PROTOCOL), 0} - } - } -}; - -EFI_STATUS -LcdInstanceContructor ( - OUT LCD_INSTANCE** NewInstance - ) -{ - LCD_INSTANCE* Instance; - - Instance = AllocateCopyPool (sizeof(LCD_INSTANCE), &mLcdTemplate); - if (Instance == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Instance->Gop.Mode = &Instance->Mode; - Instance->Mode.Info = &Instance->ModeInfo; - - *NewInstance = Instance; - return EFI_SUCCESS; -} - -EFI_STATUS -LcdPlatformGetVram ( - OUT EFI_PHYSICAL_ADDRESS* VramBaseAddress, - OUT UINTN* VramSize - ) -{ - EFI_STATUS Status; - EFI_CPU_ARCH_PROTOCOL *Cpu; - UINTN MaxSize; - - MaxSize = 0x500000; - *VramSize = MaxSize; - - // Allocate VRAM from DRAM - Status = gBS->AllocatePages (AllocateAnyPages, EfiBootServicesData, EFI_SIZE_TO_PAGES((MaxSize)), VramBaseAddress); - if (EFI_ERROR(Status)) { - return Status; - } - - // Ensure the Cpu architectural protocol is already installed - Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu); - ASSERT_EFI_ERROR(Status); - - // Mark the VRAM as un-cacheable. The VRAM is inside the DRAM, which is cacheable. - Status = Cpu->SetMemoryAttributes (Cpu, *VramBaseAddress, *VramSize, EFI_MEMORY_UC); - if (EFI_ERROR(Status)) { - gBS->FreePool (VramBaseAddress); - return Status; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -DssSetMode ( - UINT32 VramBaseAddress, - UINTN ModeNumber - ) -{ - // Make sure the interface clock is running - MmioWrite32 (CM_ICLKEN_DSS, EN_DSS); - - // Stop the functional clocks - MmioAnd32 (CM_FCLKEN_DSS, ~(EN_DSS1 | EN_DSS2 | EN_TV)); - - // Program the DSS clock divisor - MmioWrite32 (CM_CLKSEL_DSS, 0x1000 | (LcdModes[ModeNumber].DssDivisor)); - - // Start the functional clocks - MmioOr32 (CM_FCLKEN_DSS, (EN_DSS1 | EN_DSS2 | EN_TV)); - - // Wait for DSS to stabilize - gBS->Stall(1); - - // Reset the subsystem - MmioWrite32(DSS_SYSCONFIG, DSS_SOFTRESET); - while (!(MmioRead32 (DSS_SYSSTATUS) & DSS_RESETDONE)); - - // Configure LCD parameters - MmioWrite32 (DISPC_SIZE_LCD, - ((LcdModes[ModeNumber].HorizontalResolution - 1) - | ((LcdModes[ModeNumber].VerticalResolution - 1) << 16)) - ); - MmioWrite32 (DISPC_TIMING_H, - ( (LcdModes[ModeNumber].HSync - 1) - | ((LcdModes[ModeNumber].HFrontPorch - 1) << 8) - | ((LcdModes[ModeNumber].HBackPorch - 1) << 20)) - ); - MmioWrite32 (DISPC_TIMING_V, - ( (LcdModes[ModeNumber].VSync - 1) - | ((LcdModes[ModeNumber].VFrontPorch - 1) << 8) - | ((LcdModes[ModeNumber].VBackPorch - 1) << 20)) - ); - - // Set the framebuffer to only load frames (no gamma tables) - MmioAnd32 (DISPC_CONFIG, CLEARLOADMODE); - MmioOr32 (DISPC_CONFIG, LOAD_FRAME_ONLY); - - // Divisor for the pixel clock - MmioWrite32(DISPC_DIVISOR, ((1 << 16) | LcdModes[ModeNumber].DispcDivisor) ); - - // Set up the graphics layer - MmioWrite32 (DISPC_GFX_PRELD, 0x2D8); - MmioWrite32 (DISPC_GFX_BA0, VramBaseAddress); - MmioWrite32 (DISPC_GFX_SIZE, - ((LcdModes[ModeNumber].HorizontalResolution - 1) - | ((LcdModes[ModeNumber].VerticalResolution - 1) << 16)) - ); - - MmioWrite32(DISPC_GFX_ATTR, (GFXENABLE | RGB16 | BURSTSIZE16)); - - // Start it all - MmioOr32 (DISPC_CONTROL, (LCDENABLE | ACTIVEMATRIX | DATALINES24 | BYPASS_MODE | LCDENABLESIGNAL)); - MmioOr32 (DISPC_CONTROL, GOLCD); - - return EFI_SUCCESS; -} - -EFI_STATUS -HwInitializeDisplay ( - UINTN VramBaseAddress, - UINTN VramSize - ) -{ - EFI_STATUS Status; - UINT8 Data; - EFI_TPL OldTpl; - EMBEDDED_EXTERNAL_DEVICE *gTPS65950; - - // Enable power lines used by TFP410 - Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); - ASSERT_EFI_ERROR (Status); - - OldTpl = gBS->RaiseTPL(TPL_NOTIFY); - Data = VAUX_DEV_GRP_P1; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VPLL2_DEV_GRP), 1, &Data); - ASSERT_EFI_ERROR(Status); - - Data = VAUX_DEDICATED_18V; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VPLL2_DEDICATED), 1, &Data); - ASSERT_EFI_ERROR (Status); - - // Power up TFP410 (set GPIO2 on TPS - for BeagleBoard-xM) - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATADIR1), 1, &Data); - ASSERT_EFI_ERROR (Status); - Data |= BIT2; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATADIR1), 1, &Data); - ASSERT_EFI_ERROR (Status); - - Data = BIT2; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, SETGPIODATAOUT1), 1, &Data); - ASSERT_EFI_ERROR (Status); - - gBS->RestoreTPL(OldTpl); - - // Power up TFP410 (set GPIO 170 - for older BeagleBoards) - MmioAnd32 (GPIO6_BASE + GPIO_OE, ~BIT10); - MmioOr32 (GPIO6_BASE + GPIO_SETDATAOUT, BIT10); - - return EFI_SUCCESS; -} - -EFI_STATUS -InitializeDisplay ( - IN LCD_INSTANCE* Instance - ) -{ - EFI_STATUS Status; - UINTN VramSize; - EFI_PHYSICAL_ADDRESS VramBaseAddress; - - Status = LcdPlatformGetVram (&VramBaseAddress, &VramSize); - if (EFI_ERROR (Status)) { - return Status; - } - - Instance->Mode.FrameBufferBase = VramBaseAddress; - Instance->Mode.FrameBufferSize = VramSize; - - Status = HwInitializeDisplay((UINTN)VramBaseAddress, VramSize); - if (!EFI_ERROR (Status)) { - mDisplayInitialized = TRUE; - } - - return Status; -} - -EFI_STATUS -EFIAPI -LcdGraphicsQueryMode ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN UINT32 ModeNumber, - OUT UINTN *SizeOfInfo, - OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info - ) -{ - LCD_INSTANCE *Instance; - - Instance = LCD_INSTANCE_FROM_GOP_THIS(This); - - if (!mDisplayInitialized) { - InitializeDisplay (Instance); - } - - // Error checking - if ( (This == NULL) || (Info == NULL) || (SizeOfInfo == NULL) || (ModeNumber >= This->Mode->MaxMode) ) { - DEBUG((DEBUG_ERROR, "LcdGraphicsQueryMode: ERROR - For mode number %d : Invalid Parameter.\n", ModeNumber )); - return EFI_INVALID_PARAMETER; - } - - *Info = AllocateCopyPool(sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION), &Instance->ModeInfo); - if (*Info == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - *SizeOfInfo = sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION); - - (*Info)->Version = 0; - (*Info)->HorizontalResolution = LcdModes[ModeNumber].HorizontalResolution; - (*Info)->VerticalResolution = LcdModes[ModeNumber].VerticalResolution; - (*Info)->PixelFormat = PixelBltOnly; - - return EFI_SUCCESS; -} - -EFI_STATUS -EFIAPI -LcdGraphicsSetMode ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN UINT32 ModeNumber - ) -{ - LCD_INSTANCE *Instance; - - Instance = LCD_INSTANCE_FROM_GOP_THIS(This); - - if (ModeNumber >= Instance->Mode.MaxMode) { - return EFI_UNSUPPORTED; - } - - if (!mDisplayInitialized) { - InitializeDisplay (Instance); - } - - DssSetMode((UINT32)Instance->Mode.FrameBufferBase, ModeNumber); - - Instance->Mode.Mode = ModeNumber; - Instance->ModeInfo.HorizontalResolution = LcdModes[ModeNumber].HorizontalResolution; - Instance->ModeInfo.VerticalResolution = LcdModes[ModeNumber].VerticalResolution; - - return EFI_SUCCESS; -} - -EFI_STATUS -EFIAPI -LcdGraphicsOutputDxeInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status = EFI_SUCCESS; - LCD_INSTANCE* Instance; - - Status = LcdInstanceContructor (&Instance); - if (EFI_ERROR(Status)) { - goto EXIT; - } - - // Install the Graphics Output Protocol and the Device Path - Status = gBS->InstallMultipleProtocolInterfaces( - &Instance->Handle, - &gEfiGraphicsOutputProtocolGuid, &Instance->Gop, - &gEfiDevicePathProtocolGuid, &Instance->DevicePath, - NULL - ); - - if (EFI_ERROR(Status)) { - DEBUG((DEBUG_ERROR, "GraphicsOutputDxeInitialize: Can not install the protocol. Exit Status=%r\n", Status)); - goto EXIT; - } - - // Register for an ExitBootServicesEvent - // When ExitBootServices starts, this function here will make sure that the graphics driver will shut down properly, - // i.e. it will free up all allocated memory and perform any necessary hardware re-configuration. - /*Status = gBS->CreateEvent ( - EVT_SIGNAL_EXIT_BOOT_SERVICES, - TPL_NOTIFY, - LcdGraphicsExitBootServicesEvent, NULL, - &Instance->ExitBootServicesEvent - ); - - if (EFI_ERROR(Status)) { - DEBUG((DEBUG_ERROR, "GraphicsOutputDxeInitialize: Can not install the ExitBootServicesEvent handler. Exit Status=%r\n", Status)); - goto EXIT_ERROR_UNINSTALL_PROTOCOL; - }*/ - - // To get here, everything must be fine, so just exit - goto EXIT; - -//EXIT_ERROR_UNINSTALL_PROTOCOL: - /* The following function could return an error message, - * however, to get here something must have gone wrong already, - * so preserve the original error, i.e. don't change - * the Status variable, even it fails to uninstall the protocol. - */ - /* gBS->UninstallMultipleProtocolInterfaces ( - Instance->Handle, - &gEfiGraphicsOutputProtocolGuid, &Instance->Gop, // Uninstall Graphics Output protocol - &gEfiDevicePathProtocolGuid, &Instance->DevicePath, // Uninstall device path - NULL - );*/ - -EXIT: - return Status; - -} diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h deleted file mode 100644 index a1bd7afdb023..000000000000 --- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h +++ /dev/null @@ -1,157 +0,0 @@ -/** @file - - Copyright (c) 2011, ARM Ltd. All rights reserved.
- This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __OMAP3_DSS_GRAPHICS__ -#define __OMAP3_DSS_GRAPHICS__ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include - -typedef struct { - VENDOR_DEVICE_PATH Guid; - EFI_DEVICE_PATH_PROTOCOL End; -} LCD_GRAPHICS_DEVICE_PATH; - -typedef struct { - UINTN Signature; - EFI_HANDLE Handle; - EFI_GRAPHICS_OUTPUT_MODE_INFORMATION ModeInfo; - EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE Mode; - EFI_GRAPHICS_OUTPUT_PROTOCOL Gop; - LCD_GRAPHICS_DEVICE_PATH DevicePath; -// EFI_EVENT ExitBootServicesEvent; -} LCD_INSTANCE; - -#define LCD_INSTANCE_SIGNATURE SIGNATURE_32('l', 'c', 'd', '0') -#define LCD_INSTANCE_FROM_GOP_THIS(a) CR (a, LCD_INSTANCE, Gop, LCD_INSTANCE_SIGNATURE) - -typedef struct { - UINTN Mode; - UINTN HorizontalResolution; - UINTN VerticalResolution; - - UINT32 DssDivisor; - UINT32 DispcDivisor; - - UINT32 HSync; - UINT32 HFrontPorch; - UINT32 HBackPorch; - - UINT32 VSync; - UINT32 VFrontPorch; - UINT32 VBackPorch; -} LCD_MODE; - -EFI_STATUS -InitializeDisplay ( - IN LCD_INSTANCE* Instance -); - -EFI_STATUS -EFIAPI -LcdGraphicsQueryMode ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN UINT32 ModeNumber, - OUT UINTN *SizeOfInfo, - OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info -); - -EFI_STATUS -EFIAPI -LcdGraphicsSetMode ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN UINT32 ModeNumber -); - -EFI_STATUS -EFIAPI -LcdGraphicsBlt ( - IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, - IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL - IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation, - IN UINTN SourceX, - IN UINTN SourceY, - IN UINTN DestinationX, - IN UINTN DestinationY, - IN UINTN Width, - IN UINTN Height, - IN UINTN Delta OPTIONAL // Number of BYTES in a row of the BltBuffer -); - -// HW registers -#define CM_FCLKEN_DSS 0x48004E00 -#define CM_ICLKEN_DSS 0x48004E10 - -#define DSS_CONTROL 0x48050040 -#define DSS_SYSCONFIG 0x48050010 -#define DSS_SYSSTATUS 0x48050014 - -#define DISPC_CONTROL 0x48050440 -#define DISPC_CONFIG 0x48050444 -#define DISPC_SIZE_LCD 0x4805047C -#define DISPC_TIMING_H 0x48050464 -#define DISPC_TIMING_V 0x48050468 - -#define CM_CLKSEL_DSS 0x48004E40 -#define DISPC_DIVISOR 0x48050470 -#define DISPC_POL_FREQ 0x4805046C - -#define DISPC_GFX_TABLE_BA 0x480504B8 -#define DISPC_GFX_BA0 0x48050480 -#define DISPC_GFX_BA1 0x48050484 -#define DISPC_GFX_POS 0x48050488 -#define DISPC_GFX_SIZE 0x4805048C -#define DISPC_GFX_ATTR 0x480504A0 -#define DISPC_GFX_PRELD 0x4805062C - -#define DISPC_DEFAULT_COLOR_0 0x4805044C - -//#define DISPC_IRQSTATUS - -// Bits -#define EN_TV 0x4 -#define EN_DSS2 0x2 -#define EN_DSS1 0x1 -#define EN_DSS 0x1 - -#define DSS_SOFTRESET 0x2 -#define DSS_RESETDONE 0x1 - -#define BYPASS_MODE (BIT15 | BIT16) - -#define LCDENABLE BIT0 -#define ACTIVEMATRIX BIT3 -#define GOLCD BIT5 -#define DATALINES24 (BIT8 | BIT9) -#define LCDENABLESIGNAL BIT28 - -#define GFXENABLE BIT0 -#define RGB16 (0x6 << 1) -#define BURSTSIZE16 (0x2 << 6) - -#define CLEARLOADMODE ~(BIT2 | BIT1) -#define LOAD_FRAME_ONLY BIT2 - -#endif diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf deleted file mode 100644 index 1fec2dbbac6f..000000000000 --- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf +++ /dev/null @@ -1,52 +0,0 @@ -#/** @file -# -# Copyright (c) 2011, ARM Ltd. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = LcdGraphicsDxe - FILE_GUID = E68088EF-D1A4-4336-C1DB-4D3A204730A6 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - ENTRY_POINT = LcdGraphicsOutputDxeInitialize - -[Sources.common] - LcdGraphicsOutputDxe.c - LcdGraphicsOutputBlt.c - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - ArmPkg/ArmPkg.dec - ArmPlatformPkg/ArmPlatformPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[LibraryClasses] - ArmLib - UefiLib - BaseLib - DebugLib - TimerLib - UefiDriverEntryPoint - UefiBootServicesTableLib - IoLib - BaseMemoryLib - -[Protocols] - gEfiDevicePathProtocolGuid - gEfiGraphicsOutputProtocolGuid - gEfiDevicePathToTextProtocolGuid - gEmbeddedExternalDeviceProtocolGuid - -[Depex] - gEfiCpuArchProtocolGuid AND gEfiTimerArchProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c b/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c deleted file mode 100755 index 11f0bdd117af..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c +++ /dev/null @@ -1,165 +0,0 @@ -/** @file - Debug Agent timer lib for OMAP 35xx. - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ -#include -#include -#include -#include -#include -#include - -#include - - -volatile UINT32 gVector; - -// Cached registers -volatile UINT32 gTISR; -volatile UINT32 gTCLR; -volatile UINT32 gTLDR; -volatile UINT32 gTCRR; -volatile UINT32 gTIER; - -VOID -EnableInterruptSource ( - VOID - ) -{ - UINTN Bank; - UINTN Bit; - - // Map vector to FIQ, IRQ is default - MmioWrite32 (INTCPS_ILR (gVector), 1); - - Bank = gVector / 32; - Bit = 1UL << (gVector % 32); - - MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit); -} - -VOID -DisableInterruptSource ( - VOID - ) -{ - UINTN Bank; - UINTN Bit; - - Bank = gVector / 32; - Bit = 1UL << (gVector % 32); - - MmioWrite32 (INTCPS_MIR_SET(Bank), Bit); -} - - - -/** - Setup all the hardware needed for the debug agents timer. - - This function is used to set up debug enviroment. It may enable interrupts. - -**/ -VOID -EFIAPI -DebugAgentTimerIntialize ( - VOID - ) -{ - UINT32 TimerBaseAddress; - UINT32 TimerNumber; - - TimerNumber = PcdGet32(PcdOmap35xxDebugAgentTimer); - gVector = InterruptVectorForTimer (TimerNumber); - - // Set up the timer registers - TimerBaseAddress = TimerBase (TimerNumber); - gTISR = TimerBaseAddress + GPTIMER_TISR; - gTCLR = TimerBaseAddress + GPTIMER_TCLR; - gTLDR = TimerBaseAddress + GPTIMER_TLDR; - gTCRR = TimerBaseAddress + GPTIMER_TCRR; - gTIER = TimerBaseAddress + GPTIMER_TIER; - - if ((TimerNumber < 2) || (TimerNumber > 9)) { - // This code assumes one the General Purpose timers is used - // GPT2 - GPT9 - CpuDeadLoop (); - } - // Set source clock for GPT2 - GPT9 to SYS_CLK - MmioOr32 (CM_CLKSEL_PER, 1 << (TimerNumber - 2)); - -} - - -/** - Set the period for the debug agent timer. Zero means disable the timer. - - @param[in] TimerPeriodMilliseconds Frequency of the debug agent timer. - -**/ -VOID -EFIAPI -DebugAgentTimerSetPeriod ( - IN UINT32 TimerPeriodMilliseconds - ) -{ - UINT64 TimerCount; - INT32 LoadValue; - - if (TimerPeriodMilliseconds == 0) { - // Turn off GPTIMER3 - MmioWrite32 (gTCLR, TCLR_ST_OFF); - - DisableInterruptSource (); - } else { - // Calculate required timer count - TimerCount = DivU64x32(TimerPeriodMilliseconds * 1000000, PcdGet32(PcdDebugAgentTimerFreqNanoSeconds)); - - // Set GPTIMER5 Load register - LoadValue = (INT32) -TimerCount; - MmioWrite32 (gTLDR, LoadValue); - MmioWrite32 (gTCRR, LoadValue); - - // Enable Overflow interrupt - MmioWrite32 (gTIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE); - - // Turn on GPTIMER3, it will reload at overflow - MmioWrite32 (gTCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); - - EnableInterruptSource (); - } -} - - -/** - Perform End Of Interrupt for the debug agent timer. This is called in the - interrupt handler after the interrupt has been processed. - -**/ -VOID -EFIAPI -DebugAgentTimerEndOfInterrupt ( - VOID - ) -{ - // Clear all timer interrupts - MmioWrite32 (gTISR, TISR_CLEAR_ALL); - - // Poll interrupt status bits to ensure clearing - while ((MmioRead32 (gTISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING); - - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWFIQAGR); - ArmDataSynchronizationBarrier (); - -} - diff --git a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf b/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf deleted file mode 100755 index bf09b1155c1d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf +++ /dev/null @@ -1,46 +0,0 @@ -#/** @file -# Component description file for Base PCI Cf8 Library. -# -# PCI CF8 Library that uses I/O ports 0xCF8 and 0xCFC to perform PCI Configuration cycles. -# Layers on top of an I/O Library instance. -# Copyright (c) 2007, Intel Corporation. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = DebugAgentTimerLibNull - FILE_GUID = E82F99DE-74ED-4e56-BBA1-B143FCA3F69A - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = DebugAgentTimerLib|SEC BASE DXE_CORE - - -[Sources.common] - DebugAgentTimerLib.c - - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - ArmPkg/ArmPkg.dec - - -[LibraryClasses] - BaseLib - IoLib - OmapLib - ArmLib - -[Pcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer - gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds diff --git a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c b/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c deleted file mode 100644 index 47161755de84..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c +++ /dev/null @@ -1,72 +0,0 @@ -/** @file - Add custom commands for BeagleBoard development. - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -//PcdEmbeddedFdBaseAddress - -/** - Fill Me In - - Argv[0] - "%CommandName%" - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblEdk2Cmd ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - return EFI_SUCCESS; -} - - -GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] = -{ - { - "edk2", - " filename ; Load FD into memory and boot from it", - NULL, - EblEdk2Cmd - } -}; - - -VOID -EblInitializeExternalCmd ( - VOID - ) -{ - EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE)); - return; -} diff --git a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf b/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf deleted file mode 100644 index dd7a13cf6629..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf +++ /dev/null @@ -1,48 +0,0 @@ -#/** @file -# Component description file for the entry point to a EFIDXE Drivers -# -# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification -# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardEblCmdLib - FILE_GUID = ea62bdc3-1063-425f-8851-98cb47f213a8 - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER - - -# -# The following information is for reference only and not required by the build tools. -# -# VALID_ARCHITECTURES = IA32 X64 IPF EBC -# - -[Sources.common] - EblCmdLib.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - -[LibraryClasses] - BaseLib - DebugLib - -[Protocols] - -[Guids] - -[Pcd] diff --git a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c b/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c deleted file mode 100644 index dcc518244a42..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c +++ /dev/null @@ -1,102 +0,0 @@ -/** @file - Basic serial IO abstaction for GDB - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include -#include - -RETURN_STATUS -EFIAPI -GdbSerialLibConstructor ( - VOID - ) -{ - return RETURN_SUCCESS; -} - -RETURN_STATUS -EFIAPI -GdbSerialInit ( - IN UINT64 BaudRate, - IN UINT8 Parity, - IN UINT8 DataBits, - IN UINT8 StopBits - ) -{ - return RETURN_SUCCESS; -} - -BOOLEAN -EFIAPI -GdbIsCharAvailable ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - - if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { - return TRUE; - } else { - return FALSE; - } -} - -CHAR8 -EFIAPI -GdbGetChar ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; - CHAR8 Char; - - while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); - Char = MmioRead8(RBR); - - return Char; -} - -VOID -EFIAPI -GdbPutChar ( - IN CHAR8 Char - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; - - while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); - MmioWrite8(THR, Char); -} - -VOID -GdbPutString ( - IN CHAR8 *String - ) -{ - while (*String != '\0') { - GdbPutChar (*String); - String++; - } -} - - - - diff --git a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf b/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf deleted file mode 100644 index 2cacd0f0e6c7..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf +++ /dev/null @@ -1,41 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = GdbSerialLib - FILE_GUID = E2423349-EF5D-439B-95F5-8B8D8E3B443F - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = GdbSerialLib - - CONSTRUCTOR = GdbSerialLibConstructor - - -[Sources.common] - GdbSerialLib.c - - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - DebugLib - IoLib - OmapLib - -[FixedPcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart - diff --git a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf b/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf deleted file mode 100644 index e20b65477ad3..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf +++ /dev/null @@ -1,45 +0,0 @@ -#/** @file -# Timer library implementation -# -# A non-functional instance of the Timer Library that can be used as a template -# for the implementation of a functional timer library instance. This library instance can -# also be used to test build DXE, Runtime, DXE SAL, and DXE SMM modules that require timer -# services as well as EBC modules that require timer services -# Copyright (c) 2007, Intel Corporation. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardTimerLib - FILE_GUID = fe1d7183-9abb-42ce-9a3b-36d7c6a8959f - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = TimerLib - -[Sources.common] - TimerLib.c - -[Packages] - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[LibraryClasses] - DebugLib - OmapLib - IoLib - -[Pcd] - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds - gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer - diff --git a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c b/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c deleted file mode 100644 index 652c47b6f61a..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c +++ /dev/null @@ -1,133 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include - -#include -#include -#include -#include -#include -#include - -#include - -RETURN_STATUS -EFIAPI -TimerConstructor ( - VOID - ) -{ - UINTN Timer = PcdGet32(PcdOmap35xxFreeTimer); - UINT32 TimerBaseAddress = TimerBase(Timer); - - if ((MmioRead32 (TimerBaseAddress + GPTIMER_TCLR) & TCLR_ST_ON) == 0) { - // Set source clock for GPT3 & GPT4 to SYS_CLK - MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS); - - // Set count & reload registers - MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000); - MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000); - - // Disable interrupts - MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE); - - // Start Timer - MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); - - // Disable OMAP Watchdog timer (WDT2) - MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA); - DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n")); - MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555); - } - return EFI_SUCCESS; -} - -UINTN -EFIAPI -MicroSecondDelay ( - IN UINTN MicroSeconds - ) -{ - UINT64 NanoSeconds; - - NanoSeconds = MultU64x32(MicroSeconds, 1000); - - while (NanoSeconds > (UINTN)-1) { - NanoSecondDelay((UINTN)-1); - NanoSeconds -= (UINTN)-1; - } - - NanoSecondDelay(NanoSeconds); - - return MicroSeconds; -} - -UINTN -EFIAPI -NanoSecondDelay ( - IN UINTN NanoSeconds - ) -{ - UINT32 Delay; - UINT32 StartTime; - UINT32 CurrentTime; - UINT32 ElapsedTime; - UINT32 TimerCountRegister; - - Delay = (NanoSeconds / PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds)) + 1; - - TimerCountRegister = TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR; - - StartTime = MmioRead32 (TimerCountRegister); - - do - { - CurrentTime = MmioRead32 (TimerCountRegister); - ElapsedTime = CurrentTime - StartTime; - } while (ElapsedTime < Delay); - - NanoSeconds = ElapsedTime * PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds); - - return NanoSeconds; -} - -UINT64 -EFIAPI -GetPerformanceCounter ( - VOID - ) -{ - return (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR); -} - -UINT64 -EFIAPI -GetPerformanceCounterProperties ( - OUT UINT64 *StartValue, OPTIONAL - OUT UINT64 *EndValue OPTIONAL - ) -{ - if (StartValue != NULL) { - // Timer starts with the reload value - *StartValue = (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TLDR); - } - - if (EndValue != NULL) { - // Timer counts up to 0xFFFFFFFF - *EndValue = 0xFFFFFFFF; - } - - return PcdGet64(PcdEmbeddedPerformanceCounterFrequencyInHz); -} diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c b/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c deleted file mode 100755 index 41cfefbebc11..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c +++ /dev/null @@ -1,176 +0,0 @@ -/** @file - Abstractions for simple OMAP DMA channel. - - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include - - -/** - Configure OMAP DMA Channel - - @param Channel DMA Channel to configure - @param Dma4 Pointer to structure used to initialize DMA registers for the Channel - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Channel is not valid - @retval EFI_DEVICE_ERROR The system hardware could not map the requested information. - -**/ -EFI_STATUS -EFIAPI -EnableDmaChannel ( - IN UINTN Channel, - IN OMAP_DMA4 *DMA4 - ) -{ - UINT32 RegVal; - - - if (Channel > DMA4_MAX_CHANNEL) { - return EFI_INVALID_PARAMETER; - } - - /* 1) Configure the transfer parameters in the logical DMA registers */ - /*-------------------------------------------------------------------*/ - - /* a) Set the data type CSDP[1:0], the Read/Write Port access type - CSDP[8:7]/[15:14], the Source/dest endianism CSDP[21]/CSDP[19], - write mode CSDP[17:16], source/dest packed or nonpacked CSDP[6]/CSDP[13] */ - - // Read CSDP - RegVal = MmioRead32 (DMA4_CSDP (Channel)); - - // Build reg - RegVal = ((RegVal & ~ 0x3) | DMA4->DataType ); - RegVal = ((RegVal & ~(0x3 << 7)) | (DMA4->ReadPortAccessType << 7)); - RegVal = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessType << 14)); - RegVal = ((RegVal & ~(0x1 << 21)) | (DMA4->SourceEndiansim << 21)); - RegVal = ((RegVal & ~(0x1 << 19)) | (DMA4->DestinationEndianism << 19)); - RegVal = ((RegVal & ~(0x3 << 16)) | (DMA4->WriteMode << 16)); - RegVal = ((RegVal & ~(0x1 << 6)) | (DMA4->SourcePacked << 6)); - RegVal = ((RegVal & ~(0x1 << 13)) | (DMA4->DestinationPacked << 13)); - // Write CSDP - MmioWrite32 (DMA4_CSDP (Channel), RegVal); - - /* b) Set the number of element per frame CEN[23:0]*/ - MmioWrite32 (DMA4_CEN (Channel), DMA4->NumberOfElementPerFrame); - - /* c) Set the number of frame per block CFN[15:0]*/ - MmioWrite32 (DMA4_CFN (Channel), DMA4->NumberOfFramePerTransferBlock); - - /* d) Set the Source/dest start address index CSSA[31:0]/CDSA[31:0]*/ - MmioWrite32 (DMA4_CSSA (Channel), DMA4->SourceStartAddress); - MmioWrite32 (DMA4_CDSA (Channel), DMA4->DestinationStartAddress); - - /* e) Set the Read Port addressing mode CCR[13:12], the Write Port addressing mode CCR[15:14], - read/write priority CCR[6]/CCR[26] - I changed LCH CCR[20:19]=00 and CCR[4:0]=00000 to - LCH CCR[20:19]= DMA4->WriteRequestNumber and CCR[4:0]=DMA4->ReadRequestNumber - */ - - // Read CCR - RegVal = MmioRead32 (DMA4_CCR (Channel)); - - // Build reg - RegVal = ((RegVal & ~0x1f) | DMA4->ReadRequestNumber); - RegVal = ((RegVal & ~(BIT20 | BIT19)) | DMA4->WriteRequestNumber << 19); - RegVal = ((RegVal & ~(0x3 << 12)) | (DMA4->ReadPortAccessMode << 12)); - RegVal = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessMode << 14)); - RegVal = ((RegVal & ~(0x1 << 6)) | (DMA4->ReadPriority << 6)); - RegVal = ((RegVal & ~(0x1 << 26)) | (DMA4->WritePriority << 26)); - - // Write CCR - MmioWrite32 (DMA4_CCR (Channel), RegVal); - - /* f)- Set the source element index CSEI[15:0]*/ - MmioWrite32 (DMA4_CSEI (Channel), DMA4->SourceElementIndex); - - /* - Set the source frame index CSFI[15:0]*/ - MmioWrite32 (DMA4_CSFI (Channel), DMA4->SourceFrameIndex); - - - /* - Set the destination element index CDEI[15:0]*/ - MmioWrite32 (DMA4_CDEI (Channel), DMA4->DestinationElementIndex); - - /* - Set the destination frame index CDFI[31:0]*/ - MmioWrite32 (DMA4_CDFI (Channel), DMA4->DestinationFrameIndex); - - MmioWrite32 (DMA4_CDFI (Channel), DMA4->DestinationFrameIndex); - - // Enable all the status bits since we are polling - MmioWrite32 (DMA4_CICR (Channel), DMA4_CICR_ENABLE_ALL); - MmioWrite32 (DMA4_CSR (Channel), DMA4_CSR_RESET); - - /* 2) Start the DMA transfer by Setting the enable bit CCR[7]=1 */ - /*--------------------------------------------------------------*/ - //write enable bit - MmioOr32 (DMA4_CCR(Channel), DMA4_CCR_ENABLE); //Launch transfer - - return EFI_SUCCESS; -} - -/** - Turn of DMA channel configured by EnableDma(). - - @param Channel DMA Channel to configure - @param SuccesMask Bits in DMA4_CSR register indicate EFI_SUCCESS - @param ErrorMask Bits in DMA4_CSR register indicate EFI_DEVICE_ERROR - - @retval EFI_SUCCESS DMA hardware disabled - @retval EFI_INVALID_PARAMETER Channel is not valid - @retval EFI_DEVICE_ERROR The system hardware could not map the requested information. - -**/ -EFI_STATUS -EFIAPI -DisableDmaChannel ( - IN UINTN Channel, - IN UINT32 SuccessMask, - IN UINT32 ErrorMask - ) -{ - EFI_STATUS Status = EFI_SUCCESS; - UINT32 Reg; - - - if (Channel > DMA4_MAX_CHANNEL) { - return EFI_INVALID_PARAMETER; - } - - do { - Reg = MmioRead32 (DMA4_CSR(Channel)); - if ((Reg & ErrorMask) != 0) { - Status = EFI_DEVICE_ERROR; - DEBUG ((EFI_D_ERROR, "DMA Error (%d) %x\n", Channel, Reg)); - break; - } - } while ((Reg & SuccessMask) != SuccessMask); - - - // Disable all status bits and clear them - MmioWrite32 (DMA4_CICR (Channel), 0); - MmioWrite32 (DMA4_CSR (Channel), DMA4_CSR_RESET); - - MmioAnd32 (DMA4_CCR(0), ~(DMA4_CCR_ENABLE | DMA4_CCR_RD_ACTIVE | DMA4_CCR_WR_ACTIVE)); - return Status; -} - - - diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf b/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf deleted file mode 100755 index 1893adf1180a..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf +++ /dev/null @@ -1,50 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = OmapDmaLib - FILE_GUID = 09B17D99-BB07-49a8-B0D2-06D6AFCBE3AB - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = OmapDmaLib - - -[Sources.common] - OmapDmaLib.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - DebugLib - UefiBootServicesTableLib - MemoryAllocationLib - UncachedMemoryAllocationLib - IoLib - BaseMemoryLib - ArmLib - - -[Protocols] - gEfiCpuArchProtocolGuid - -[Guids] - -[Pcd] - -[Depex] - gEfiCpuArchProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c b/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c deleted file mode 100644 index 29645ee55a91..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c +++ /dev/null @@ -1,83 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include - -UINT32 -GpioBase ( - IN UINTN Port - ) -{ - switch (Port) { - case 1: return GPIO1_BASE; - case 2: return GPIO2_BASE; - case 3: return GPIO3_BASE; - case 4: return GPIO4_BASE; - case 5: return GPIO5_BASE; - case 6: return GPIO6_BASE; - default: ASSERT(FALSE); return 0; - } -} - -UINT32 -TimerBase ( - IN UINTN Timer - ) -{ - switch (Timer) { - case 1: return GPTIMER1_BASE; - case 2: return GPTIMER2_BASE; - case 3: return GPTIMER3_BASE; - case 4: return GPTIMER4_BASE; - case 5: return GPTIMER5_BASE; - case 6: return GPTIMER6_BASE; - case 7: return GPTIMER7_BASE; - case 8: return GPTIMER8_BASE; - case 9: return GPTIMER9_BASE; - case 10: return GPTIMER10_BASE; - case 11: return GPTIMER11_BASE; - case 12: return GPTIMER12_BASE; - default: return 0; - } -} - -UINTN -InterruptVectorForTimer ( - IN UINTN Timer - ) -{ - if ((Timer < 1) || (Timer > 12)) { - ASSERT(FALSE); - return 0xFFFFFFFF; - } - - return 36 + Timer; -} - -UINT32 -UartBase ( - IN UINTN Uart - ) -{ - switch (Uart) { - case 1: return UART1_BASE; - case 2: return UART2_BASE; - case 3: return UART3_BASE; - default: ASSERT(FALSE); return 0; - } -} - diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf b/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf deleted file mode 100644 index b75d68696c66..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf +++ /dev/null @@ -1,37 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = OmapLib - FILE_GUID = d035f5c2-1b92-4746-9f6c-5ff6202970df - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = OmapLib - -[Sources.common] - OmapLib.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - DebugLib - -[Protocols] - -[Guids] - -[Pcd] diff --git a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c b/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c deleted file mode 100755 index 0ae452ebd7c1..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c +++ /dev/null @@ -1,297 +0,0 @@ -/** @file -* -* Copyright (c) 2011, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#include - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - - -EMBEDDED_EXTERNAL_DEVICE *gTPS65950; -INT16 TimeZone = EFI_UNSPECIFIED_TIMEZONE; - -/** - Returns the current time and date information, and the time-keeping capabilities - of the hardware platform. - - @param Time A pointer to storage to receive a snapshot of the current time. - @param Capabilities An optional pointer to a buffer to receive the real time clock - device's capabilities. - - @retval EFI_SUCCESS The operation completed successfully. - @retval EFI_INVALID_PARAMETER Time is NULL. - @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error. - -**/ -EFI_STATUS -EFIAPI -LibGetTime ( - OUT EFI_TIME *Time, - OUT EFI_TIME_CAPABILITIES *Capabilities - ) -{ - EFI_STATUS Status; - UINT8 Data; - EFI_TPL OldTpl; - - if (Time == NULL) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL(TPL_NOTIFY); - - /* Get time and date */ - ZeroMem(Time, sizeof(EFI_TIME)); - - // Latch values - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Data |= BIT6; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - // Read registers - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, YEARS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Year = 2000 + ((Data >> 4) & 0xF) * 10 + (Data & 0xF); - - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MONTHS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Month = ((Data >> 4) & 0x1) * 10 + (Data & 0xF); - - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, DAYS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Day = ((Data >> 4) & 0x3) * 10 + (Data & 0xF); - - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, HOURS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Hour = ((Data >> 4) & 0x3) * 10 + (Data & 0xF); - - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MINUTES_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Minute = ((Data >> 4) & 0x7) * 10 + (Data & 0xF); - - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, SECONDS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - Time->Second = ((Data >> 4) & 0x7) * 10 + (Data & 0xF); - - Time->TimeZone = TimeZone; - // TODO: check what to use here - Time->Daylight = EFI_TIME_ADJUST_DAYLIGHT; - - // Set capabilities - - // TODO: Set real capabilities - if (Capabilities != NULL) { - Capabilities->Resolution = 1; - Capabilities->Accuracy = 50000000; - Capabilities->SetsToZero = FALSE; - } - -EXIT: - gBS->RestoreTPL(OldTpl); - - return (Status == EFI_SUCCESS) ? Status : EFI_DEVICE_ERROR; -} - -/** - Sets the current local time and date information. - - @param Time A pointer to the current time. - - @retval EFI_SUCCESS The operation completed successfully. - @retval EFI_INVALID_PARAMETER A time field is out of range. - @retval EFI_DEVICE_ERROR The time could not be set due due to hardware error. - -**/ -EFI_STATUS -EFIAPI -LibSetTime ( - IN EFI_TIME *Time - ) -{ - EFI_STATUS Status; - UINT8 Data; - UINT8 MonthDayCount[12] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - EFI_TPL OldTpl; - - // Input validation according both to UEFI spec and hardware constraints - // UEFI spec says valid year range is 1900-9999 but TPS only supports 2000-2099 - if ( (Time == NULL) - || (Time->Year < 2000 || Time->Year > 2099) - || (Time->Month < 1 || Time->Month > 12) - || (Time->Day < 1 || Time->Day > MonthDayCount[Time->Month]) - || (Time->Hour > 23) - || (Time->Minute > 59) - || (Time->Second > 59) - || (Time->Nanosecond > 999999999) - || ((Time->TimeZone < -1440 || Time->TimeZone > 1440) && Time->TimeZone != 2047) - ) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL(TPL_NOTIFY); - - Data = Time->Year - 2000; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, YEARS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - Data = ((Time->Month / 10) << 4) | (Time->Month % 10); - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MONTHS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - Data = ((Time->Day / 10) << 4) | (Time->Day % 10); - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, DAYS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - Data = ((Time->Hour / 10) << 4) | (Time->Hour % 10); - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, HOURS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - Data = ((Time->Minute / 10) << 4) | (Time->Minute % 10); - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MINUTES_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - Data = ((Time->Second / 10) << 4) | (Time->Second % 10); - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, SECONDS_REG), 1, &Data); - if (Status != EFI_SUCCESS) goto EXIT; - - TimeZone = Time->TimeZone; - -EXIT: - gBS->RestoreTPL(OldTpl); - - return (Status == EFI_SUCCESS) ? Status : EFI_DEVICE_ERROR; -} - -/** - Returns the current wakeup alarm clock setting. - - @param Enabled Indicates if the alarm is currently enabled or disabled. - @param Pending Indicates if the alarm signal is pending and requires acknowledgement. - @param Time The current alarm setting. - - @retval EFI_SUCCESS The alarm settings were returned. - @retval EFI_INVALID_PARAMETER Any parameter is NULL. - @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error. - -**/ -EFI_STATUS -EFIAPI -LibGetWakeupTime ( - OUT BOOLEAN *Enabled, - OUT BOOLEAN *Pending, - OUT EFI_TIME *Time - ) -{ - return EFI_UNSUPPORTED; -} - -/** - Sets the system wakeup alarm clock time. - - @param Enabled Enable or disable the wakeup alarm. - @param Time If Enable is TRUE, the time to set the wakeup alarm for. - - @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If - Enable is FALSE, then the wakeup alarm was disabled. - @retval EFI_INVALID_PARAMETER A time field is out of range. - @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error. - @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. - -**/ -EFI_STATUS -EFIAPI -LibSetWakeupTime ( - IN BOOLEAN Enabled, - OUT EFI_TIME *Time - ) -{ - return EFI_UNSUPPORTED; -} - -/** - This is the declaration of an EFI image entry point. This can be the entry point to an application - written to this specification, an EFI boot service driver, or an EFI runtime driver. - - @param ImageHandle Handle that identifies the loaded image. - @param SystemTable System Table for this image. - - @retval EFI_SUCCESS The operation completed successfully. - -**/ -EFI_STATUS -EFIAPI -LibRtcInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - EFI_HANDLE Handle; - UINT8 Data; - EFI_TPL OldTpl; - - Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); - ASSERT_EFI_ERROR(Status); - - OldTpl = gBS->RaiseTPL(TPL_NOTIFY); - Data = 1; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data); - ASSERT_EFI_ERROR(Status); - gBS->RestoreTPL(OldTpl); - - // Setup the setters and getters - gRT->GetTime = LibGetTime; - gRT->SetTime = LibSetTime; - gRT->GetWakeupTime = LibGetWakeupTime; - gRT->SetWakeupTime = LibSetWakeupTime; - - // Install the protocol - Handle = NULL; - Status = gBS->InstallMultipleProtocolInterfaces ( - &Handle, - &gEfiRealTimeClockArchProtocolGuid, NULL, - NULL - ); - - return Status; -} - -/** - Fixup internal data so that EFI can be call in virtual mode. - Call the passed in Child Notify event and convert any pointers in - lib to virtual mode. - - @param[in] Event The Event that is being processed - @param[in] Context Event Context -**/ -VOID -EFIAPI -LibRtcVirtualNotifyEvent ( - IN EFI_EVENT Event, - IN VOID *Context - ) -{ - return; -} diff --git a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf b/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf deleted file mode 100755 index 83edd86d6ccd..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf +++ /dev/null @@ -1,38 +0,0 @@ -# Copyright (c) 2011, ARM Limited. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = RealTimeClockLib - FILE_GUID = EC1713DB-7DB5-4c99-8FE2-6F52F95A1132 - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = RealTimeClockLib - -[Sources.common] - RealTimeClockLib.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - IoLib - UefiLib - DebugLib - PcdLib - -[Protocols] - gEmbeddedExternalDeviceProtocolGuid - -[depex] - gEmbeddedExternalDeviceProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c b/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c deleted file mode 100644 index 82f04eaad1c8..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c +++ /dev/null @@ -1,90 +0,0 @@ -/** @file - Template library implementation to support ResetSystem Runtime call. - - Fill in the templates with what ever makes you system reset. - - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - - -#include - -#include -#include -#include -#include -#include - - -/** - Resets the entire platform. - - @param ResetType The type of reset to perform. - @param ResetStatus The status code for the reset. - @param DataSize The size, in bytes, of WatchdogData. - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or - EfiResetShutdown the data buffer starts with a Null-terminated - Unicode string, optionally followed by additional binary data. - -**/ -EFI_STATUS -EFIAPI -LibResetSystem ( - IN EFI_RESET_TYPE ResetType, - IN EFI_STATUS ResetStatus, - IN UINTN DataSize, - IN CHAR16 *ResetData OPTIONAL - ) -{ - if (ResetData != NULL) { - DEBUG((EFI_D_ERROR, "%s", ResetData)); - } - - switch (ResetType) { - case EfiResetWarm: - // Map a warm reset into a cold reset - case EfiResetCold: - case EfiResetShutdown: - default: - // Perform cold reset of the system. - MmioOr32 (PRM_RSTCTRL, RST_DPLL3); - while ((MmioRead32 (PRM_RSTST) & GLOBAL_COLD_RST) != 0x1); - break; - } - - // If the reset didn't work, return an error. - ASSERT (FALSE); - return EFI_DEVICE_ERROR; -} - - - -/** - Initialize any infrastructure required for LibResetSystem () to function. - - @param ImageHandle The firmware allocated handle for the EFI image. - @param SystemTable A pointer to the EFI System Table. - - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS. - -**/ -EFI_STATUS -EFIAPI -LibInitializeResetSystem ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - return EFI_SUCCESS; -} - diff --git a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf b/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf deleted file mode 100644 index 20496fa16735..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf +++ /dev/null @@ -1,40 +0,0 @@ -#/** @file -# Reset System lib to make it easy to port new platforms -# -# Copyright (c) 2008, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardResetSystemLib - FILE_GUID = 781371a2-3fdd-41d4-96a1-7b34cbc9e895 - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = EfiResetSystemLib - - -[Sources.common] - ResetSystemLib.c - -[Packages] - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - ArmPkg/ArmPkg.dec - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[Pcd.common] - gArmTokenSpaceGuid.PcdCpuResetAddress - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress - -[LibraryClasses] - DebugLib - BeagleBoardSystemLib diff --git a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c b/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c deleted file mode 100644 index 7ac12c729f57..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c +++ /dev/null @@ -1,214 +0,0 @@ -/** @file - Serial I/O Port library functions with no library constructor/destructor - - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- Copyright (c) 2015, Intel Corporation. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include -#include - -/* - - Programmed hardware of Serial port. - - @return Always return EFI_UNSUPPORTED. - -**/ -RETURN_STATUS -EFIAPI -SerialPortInitialize ( - VOID - ) -{ - // assume assembly code at reset vector has setup UART - return RETURN_SUCCESS; -} - -/** - Write data to serial device. - - @param Buffer Point of data buffer which need to be writed. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Write data failed. - @retval !0 Actual number of bytes writed to serial device. - -**/ -UINTN -EFIAPI -SerialPortWrite ( - IN UINT8 *Buffer, - IN UINTN NumberOfBytes -) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; - UINTN Count; - - for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) { - while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); - MmioWrite8(THR, *Buffer); - } - - return NumberOfBytes; -} - - -/** - Read data from serial device and save the datas in buffer. - - @param Buffer Point of data buffer which need to be writed. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Read data failed. - @retval !0 Aactual number of bytes read from serial device. - -**/ -UINTN -EFIAPI -SerialPortRead ( - OUT UINT8 *Buffer, - IN UINTN NumberOfBytes -) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; - UINTN Count; - - for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) { - while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); - *Buffer = MmioRead8(RBR); - } - - return NumberOfBytes; -} - - -/** - Check to see if any data is avaiable to be read from the debug device. - - @retval EFI_SUCCESS At least one byte of data is avaiable to be read - @retval EFI_NOT_READY No data is avaiable to be read - @retval EFI_DEVICE_ERROR The serial device is not functioning properly - -**/ -BOOLEAN -EFIAPI -SerialPortPoll ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - - if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { - return TRUE; - } else { - return FALSE; - } -} - -/** - Sets the control bits on a serial device. - - @param[in] Control Sets the bits of Control that are settable. - - @retval RETURN_SUCCESS The new control bits were set on the serial device. - @retval RETURN_UNSUPPORTED The serial device does not support this operation. - @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetControl ( - IN UINT32 Control - ) -{ - return RETURN_UNSUPPORTED; -} - -/** - Retrieve the status of the control bits on a serial device. - - @param[out] Control A pointer to return the current control signals from the serial device. - - @retval RETURN_SUCCESS The control bits were read from the serial device. - @retval RETURN_UNSUPPORTED The serial device does not support this operation. - @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortGetControl ( - OUT UINT32 *Control - ) -{ - *Control = 0; - if (!SerialPortPoll ()) { - *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY; - } - return RETURN_SUCCESS; -} - -/** - Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, - data bits, and stop bits on a serial device. - - @param BaudRate The requested baud rate. A BaudRate value of 0 will use the - device's default interface speed. - On output, the value actually set. - @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the - serial interface. A ReceiveFifoDepth value of 0 will use - the device's default FIFO depth. - On output, the value actually set. - @param Timeout The requested time out for a single character in microseconds. - This timeout applies to both the transmit and receive side of the - interface. A Timeout value of 0 will use the device's default time - out value. - On output, the value actually set. - @param Parity The type of parity to use on this serial device. A Parity value of - DefaultParity will use the device's default parity value. - On output, the value actually set. - @param DataBits The number of data bits to use on the serial device. A DataBits - vaule of 0 will use the device's default data bit setting. - On output, the value actually set. - @param StopBits The number of stop bits to use on this serial device. A StopBits - value of DefaultStopBits will use the device's default number of - stop bits. - On output, the value actually set. - - @retval RETURN_SUCCESS The new attributes were set on the serial device. - @retval RETURN_UNSUPPORTED The serial device does not support this operation. - @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value. - @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetAttributes ( - IN OUT UINT64 *BaudRate, - IN OUT UINT32 *ReceiveFifoDepth, - IN OUT UINT32 *Timeout, - IN OUT EFI_PARITY_TYPE *Parity, - IN OUT UINT8 *DataBits, - IN OUT EFI_STOP_BITS_TYPE *StopBits - ) -{ - return RETURN_UNSUPPORTED; -} - diff --git a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf b/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf deleted file mode 100644 index 3382ef75296f..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf +++ /dev/null @@ -1,44 +0,0 @@ -#/** @file -# EDK Serial port lib -# -# Copyright (c) 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardSerialPortLib - FILE_GUID = 97546cbd-c0ff-4c48-ab0b-e4f58862acd3 - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = SerialPortLib - - -# -# VALID_ARCHITECTURES = ARM IA32 X64 IPF EBC -# - -[Sources.common] - SerialPortLib.c - -[LibraryClasses] - DebugLib - IoLib - OmapLib - -[Packages] - EmbeddedPkg/EmbeddedPkg.dec - MdePkg/MdePkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[FixedPcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart - diff --git a/Chips/TexasInstruments/Omap35xx/License.txt b/Chips/TexasInstruments/Omap35xx/License.txt deleted file mode 100755 index 05dbd3606dcc..000000000000 --- a/Chips/TexasInstruments/Omap35xx/License.txt +++ /dev/null @@ -1,26 +0,0 @@ -Copyright (c) 2009-2010, Apple Inc. All rights reserved. -Copyright (c) 2011-2012, ARM Limited. All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions -are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c deleted file mode 100644 index 9f0ebe0f65d5..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c +++ /dev/null @@ -1,1494 +0,0 @@ -/** @file - MMC/SD Card driver for OMAP 35xx (SDIO not supported) - - This driver always produces a BlockIo protocol but it starts off with no Media - present. A TimerCallBack detects when media is inserted or removed and after - a media change event a call to BlockIo ReadBlocks/WriteBlocks will cause the - media to be detected (or removed) and the BlockIo Media structure will get - updated. No MMC/SD Card harward registers are updated until the first BlockIo - ReadBlocks/WriteBlocks after media has been insterted (booting with a card - plugged in counts as an insertion event). - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "MMCHS.h" - -EFI_BLOCK_IO_MEDIA gMMCHSMedia = { - SIGNATURE_32('s','d','i','o'), // MediaId - TRUE, // RemovableMedia - FALSE, // MediaPresent - FALSE, // LogicalPartition - FALSE, // ReadOnly - FALSE, // WriteCaching - 512, // BlockSize - 4, // IoAlign - 0, // Pad - 0 // LastBlock -}; - -typedef struct { - VENDOR_DEVICE_PATH Mmc; - EFI_DEVICE_PATH End; -} MMCHS_DEVICE_PATH; - -MMCHS_DEVICE_PATH gMmcHsDevicePath = { - { - HARDWARE_DEVICE_PATH, - HW_VENDOR_DP, - (UINT8)(sizeof(VENDOR_DEVICE_PATH)), - (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8), - 0xb615f1f5, 0x5088, 0x43cd, 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00 - }, - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 } - } -}; - -CARD_INFO gCardInfo; -EMBEDDED_EXTERNAL_DEVICE *gTPS65950; -EFI_EVENT gTimerEvent; -BOOLEAN gMediaChange = FALSE; - -// -// Internal Functions -// - - -VOID -ParseCardCIDData ( - UINT32 Response0, - UINT32 Response1, - UINT32 Response2, - UINT32 Response3 - ) -{ - gCardInfo.CIDData.MDT = ((Response0 >> 8) & 0xFFF); - gCardInfo.CIDData.PSN = (((Response0 >> 24) & 0xFF) | ((Response1 & 0xFFFFFF) << 8)); - gCardInfo.CIDData.PRV = ((Response1 >> 24) & 0xFF); - gCardInfo.CIDData.PNM[4] = ((Response2) & 0xFF); - gCardInfo.CIDData.PNM[3] = ((Response2 >> 8) & 0xFF); - gCardInfo.CIDData.PNM[2] = ((Response2 >> 16) & 0xFF); - gCardInfo.CIDData.PNM[1] = ((Response2 >> 24) & 0xFF); - gCardInfo.CIDData.PNM[0] = ((Response3) & 0xFF); - gCardInfo.CIDData.OID = ((Response3 >> 8) & 0xFFFF); - gCardInfo.CIDData.MID = ((Response3 >> 24) & 0xFF); -} - - -VOID -UpdateMMCHSClkFrequency ( - UINTN NewCLKD - ) -{ - //Set Clock enable to 0x0 to not provide the clock to the card - MmioAnd32 (MMCHS_SYSCTL, ~CEN); - - //Set new clock frequency. - MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6); - - //Poll till Internal Clock Stable - while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS); - - //Set Clock enable to 0x1 to provide the clock to the card - MmioOr32 (MMCHS_SYSCTL, CEN); -} - - -EFI_STATUS -SendCmd ( - UINTN Cmd, - UINTN CmdInterruptEnableVal, - UINTN CmdArgument - ) -{ - UINTN MmcStatus; - UINTN RetryCount = 0; - - //Check if command line is in use or not. Poll till command line is available. - while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); - - //Provide the block size. - MmioWrite32 (MMCHS_BLK, BLEN_512BYTES); - - //Setting Data timeout counter value to max value. - MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL); - - //Clear Status register. - MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF); - - //Set command argument register - MmioWrite32 (MMCHS_ARG, CmdArgument); - - //Enable interrupt enable events to occur - MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal); - - //Send a command - MmioWrite32 (MMCHS_CMD, Cmd); - - //Check for the command status. - while (RetryCount < MAX_RETRY_COUNT) { - do { - MmcStatus = MmioRead32 (MMCHS_STAT); - } while (MmcStatus == 0); - - //Read status of command response - if ((MmcStatus & ERRI) != 0) { - - //Perform soft-reset for mmci_cmd line. - MmioOr32 (MMCHS_SYSCTL, SRC); - while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); - - DEBUG ((EFI_D_INFO, "MmcStatus: %x\n", MmcStatus)); - return EFI_DEVICE_ERROR; - } - - //Check if command is completed. - if ((MmcStatus & CC) == CC) { - MmioWrite32 (MMCHS_STAT, CC); - break; - } - - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - - -VOID -GetBlockInformation ( - UINTN *BlockSize, - UINTN *NumBlocks - ) -{ - CSD_SDV2 *CsdSDV2Data; - UINTN CardSize; - - if (gCardInfo.CardType == SD_CARD_2_HIGH) { - CsdSDV2Data = (CSD_SDV2 *)&gCardInfo.CSDData; - - //Populate BlockSize. - *BlockSize = (0x1UL << CsdSDV2Data->READ_BL_LEN); - - //Calculate Total number of blocks. - CardSize = CsdSDV2Data->C_SIZELow16 | (CsdSDV2Data->C_SIZEHigh6 << 2); - *NumBlocks = ((CardSize + 1) * 1024); - } else { - //Populate BlockSize. - *BlockSize = (0x1UL << gCardInfo.CSDData.READ_BL_LEN); - - //Calculate Total number of blocks. - CardSize = gCardInfo.CSDData.C_SIZELow2 | (gCardInfo.CSDData.C_SIZEHigh10 << 2); - *NumBlocks = (CardSize + 1) * (1 << (gCardInfo.CSDData.C_SIZE_MULT + 2)); - } - - //For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes. - if (*BlockSize > 512) { - *NumBlocks = MultU64x32(*NumBlocks, *BlockSize/2); - *BlockSize = 512; - } - - DEBUG ((EFI_D_INFO, "Card type: %x, BlockSize: %x, NumBlocks: %x\n", gCardInfo.CardType, *BlockSize, *NumBlocks)); -} - - -VOID -CalculateCardCLKD ( - UINTN *ClockFrequencySelect - ) -{ - UINT8 MaxDataTransferRate; - UINTN TransferRateValue = 0; - UINTN TimeValue = 0 ; - UINTN Frequency = 0; - - MaxDataTransferRate = gCardInfo.CSDData.TRAN_SPEED; - - // For SD Cards we would need to send CMD6 to set - // speeds abouve 25MHz. High Speed mode 50 MHz and up - - //Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED) - switch (MaxDataTransferRate & 0x7) { - case 0: - TransferRateValue = 100 * 1000; - break; - - case 1: - TransferRateValue = 1 * 1000 * 1000; - break; - - case 2: - TransferRateValue = 10 * 1000 * 1000; - break; - - case 3: - TransferRateValue = 100 * 1000 * 1000; - break; - - default: - DEBUG((EFI_D_ERROR, "Invalid parameter.\n")); - ASSERT(FALSE); - } - - //Calculate Time value (Bits 6:3 of TRAN_SPEED) - switch ((MaxDataTransferRate >> 3) & 0xF) { - case 1: - TimeValue = 10; - break; - - case 2: - TimeValue = 12; - break; - - case 3: - TimeValue = 13; - break; - - case 4: - TimeValue = 15; - break; - - case 5: - TimeValue = 20; - break; - - case 6: - TimeValue = 25; - break; - - case 7: - TimeValue = 30; - break; - - case 8: - TimeValue = 35; - break; - - case 9: - TimeValue = 40; - break; - - case 10: - TimeValue = 45; - break; - - case 11: - TimeValue = 50; - break; - - case 12: - TimeValue = 55; - break; - - case 13: - TimeValue = 60; - break; - - case 14: - TimeValue = 70; - break; - - case 15: - TimeValue = 80; - break; - - default: - DEBUG((EFI_D_ERROR, "Invalid parameter.\n")); - ASSERT(FALSE); - } - - Frequency = TransferRateValue * TimeValue/10; - - //Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field. - *ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1); - - DEBUG ((EFI_D_INFO, "MaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", MaxDataTransferRate, Frequency/1000, *ClockFrequencySelect)); -} - - -VOID -GetCardConfigurationData ( - VOID - ) -{ - UINTN BlockSize; - UINTN NumBlocks; - UINTN ClockFrequencySelect; - - //Calculate BlockSize and Total number of blocks in the detected card. - GetBlockInformation(&BlockSize, &NumBlocks); - gCardInfo.BlockSize = BlockSize; - gCardInfo.NumBlocks = NumBlocks; - - //Calculate Card clock divider value. - CalculateCardCLKD(&ClockFrequencySelect); - gCardInfo.ClockFrequencySelect = ClockFrequencySelect; -} - - -EFI_STATUS -InitializeMMCHS ( - VOID - ) -{ - UINT8 Data = 0; - EFI_STATUS Status; - - //Select Device group to belong to P1 device group in Power IC. - Data = DEV_GRP_P1; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data); - ASSERT_EFI_ERROR(Status); - - //Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage. - Data = VSEL_3_00V; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data); - ASSERT_EFI_ERROR(Status); - - //After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable. - MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); - - // Enable WP GPIO - MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23); - - // Enable Card Detect - Data = CARD_DETECT_ENABLE; - gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data); - - - return Status; -} - - -EFI_STATUS -PerformCardIdenfication ( - VOID - ) -{ - EFI_STATUS Status; - UINTN CmdArgument = 0; - UINTN Response = 0; - UINTN RetryCount = 0; - BOOLEAN SDCmd8Supported = FALSE; - - //Enable interrupts. - MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | - CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN)); - - //Controller INIT procedure start. - MmioOr32 (MMCHS_CON, INIT); - MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32 (MMCHS_STAT) & CC)); - - //Wait for 1 ms - gBS->Stall(1000); - - //Set CC bit to 0x1 to clear the flag - MmioOr32 (MMCHS_STAT, CC); - - //Retry INIT procedure. - MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32 (MMCHS_STAT) & CC)); - - //End initialization sequence - MmioAnd32 (MMCHS_CON, ~INIT); - - MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON)); - - //Change clock frequency to 400KHz to fit protocol - UpdateMMCHSClkFrequency(CLKD_400KHZ); - - MmioOr32 (MMCHS_CON, OD); - - //Send CMD0 command. - Status = SendCmd (CMD0, CMD0_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "Cmd0 fails.\n")); - return Status; - } - - DEBUG ((EFI_D_INFO, "CMD0 response: %x\n", MmioRead32 (MMCHS_RSP10))); - - //Send CMD5 command. - Status = SendCmd (CMD5, CMD5_INT_EN, CmdArgument); - if (Status == EFI_SUCCESS) { - DEBUG ((EFI_D_ERROR, "CMD5 Success. SDIO card. Follow SDIO card specification.\n")); - DEBUG ((EFI_D_INFO, "CMD5 response: %x\n", MmioRead32 (MMCHS_RSP10))); - //NOTE: Returning unsupported error for now. Need to implement SDIO specification. - return EFI_UNSUPPORTED; - } else { - DEBUG ((EFI_D_INFO, "CMD5 fails. Not an SDIO card.\n")); - } - - MmioOr32 (MMCHS_SYSCTL, SRC); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); - - //Send CMD8 command. (New v2.00 command for Voltage check) - //Only 2.7V - 3.6V is supported for SD2.0, only SD 2.0 card can pass. - //MMC & SD1.1 card will fail this command. - CmdArgument = CMD8_ARG; - Status = SendCmd (CMD8, CMD8_INT_EN, CmdArgument); - if (Status == EFI_SUCCESS) { - Response = MmioRead32 (MMCHS_RSP10); - DEBUG ((EFI_D_INFO, "CMD8 success. CMD8 response: %x\n", Response)); - if (Response != CmdArgument) { - return EFI_DEVICE_ERROR; - } - DEBUG ((EFI_D_INFO, "Card is SD2.0\n")); - SDCmd8Supported = TRUE; //Supports high capacity. - } else { - DEBUG ((EFI_D_INFO, "CMD8 fails. Not an SD2.0 card.\n")); - } - - MmioOr32 (MMCHS_SYSCTL, SRC); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); - - //Poll till card is busy - while (RetryCount < MAX_RETRY_COUNT) { - //Send CMD55 command. - CmdArgument = 0; - Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument); - if (Status == EFI_SUCCESS) { - DEBUG ((EFI_D_INFO, "CMD55 success. CMD55 response: %x\n", MmioRead32 (MMCHS_RSP10))); - gCardInfo.CardType = SD_CARD; - } else { - DEBUG ((EFI_D_INFO, "CMD55 fails.\n")); - gCardInfo.CardType = MMC_CARD; - } - - //Send appropriate command for the card type which got detected. - if (gCardInfo.CardType == SD_CARD) { - CmdArgument = ((UINTN *) &(gCardInfo.OCRData))[0]; - - //Set HCS bit. - if (SDCmd8Supported) { - CmdArgument |= HCS; - } - - Status = SendCmd (ACMD41, ACMD41_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_INFO, "ACMD41 fails.\n")); - return Status; - } - ((UINT32 *) &(gCardInfo.OCRData))[0] = MmioRead32 (MMCHS_RSP10); - DEBUG ((EFI_D_INFO, "SD card detected. ACMD41 OCR: %x\n", ((UINT32 *) &(gCardInfo.OCRData))[0])); - } else if (gCardInfo.CardType == MMC_CARD) { - CmdArgument = 0; - Status = SendCmd (CMD1, CMD1_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_INFO, "CMD1 fails.\n")); - return Status; - } - Response = MmioRead32 (MMCHS_RSP10); - DEBUG ((EFI_D_INFO, "MMC card detected.. CMD1 response: %x\n", Response)); - - //NOTE: For now, I am skipping this since I only have an SD card. - //Compare card OCR and host OCR (Section 22.6.1.3.2.4) - return EFI_UNSUPPORTED; //For now, MMC is not supported. - } - - //Poll the card until it is out of its power-up sequence. - if (gCardInfo.OCRData.Busy == 1) { - - if (SDCmd8Supported) { - gCardInfo.CardType = SD_CARD_2; - } - - //Card is ready. Check CCS (Card capacity status) bit (bit#30). - //SD 2.0 standard card will response with CCS 0, SD high capacity card will respond with CCS 1. - if (gCardInfo.OCRData.AccessMode & BIT1) { - gCardInfo.CardType = SD_CARD_2_HIGH; - DEBUG ((EFI_D_INFO, "High capacity card.\n")); - } else { - DEBUG ((EFI_D_INFO, "Standard capacity card.\n")); - } - - break; - } - - gBS->Stall(1000); - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - DEBUG ((EFI_D_ERROR, "Timeout error. RetryCount: %d\n", RetryCount)); - return EFI_TIMEOUT; - } - - //Read CID data. - CmdArgument = 0; - Status = SendCmd (CMD2, CMD2_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD2 fails. Status: %x\n", Status)); - return Status; - } - - DEBUG ((EFI_D_INFO, "CMD2 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76))); - - //Parse CID register data. - ParseCardCIDData(MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)); - - //Read RCA - CmdArgument = 0; - Status = SendCmd (CMD3, CMD3_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD3 fails. Status: %x\n", Status)); - return Status; - } - - //Set RCA for the detected card. RCA is CMD3 response. - gCardInfo.RCA = (MmioRead32 (MMCHS_RSP10) >> 16); - DEBUG ((EFI_D_INFO, "CMD3 response: RCA %x\n", gCardInfo.RCA)); - - //MMC Bus setting change after card identification. - MmioAnd32 (MMCHS_CON, ~OD); - MmioOr32 (MMCHS_HCTL, SDVS_3_0_V); - UpdateMMCHSClkFrequency(CLKD_400KHZ); //Set the clock frequency to 400KHz. - - return EFI_SUCCESS; -} - - -EFI_STATUS -GetCardSpecificData ( - VOID - ) -{ - EFI_STATUS Status; - UINTN CmdArgument; - - //Send CMD9 to retrieve CSD. - CmdArgument = gCardInfo.RCA << 16; - Status = SendCmd (CMD9, CMD9_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD9 fails. Status: %x\n", Status)); - return Status; - } - - //Populate 128-bit CSD register data. - ((UINT32 *)&(gCardInfo.CSDData))[0] = MmioRead32 (MMCHS_RSP10); - ((UINT32 *)&(gCardInfo.CSDData))[1] = MmioRead32 (MMCHS_RSP32); - ((UINT32 *)&(gCardInfo.CSDData))[2] = MmioRead32 (MMCHS_RSP54); - ((UINT32 *)&(gCardInfo.CSDData))[3] = MmioRead32 (MMCHS_RSP76); - - DEBUG ((EFI_D_INFO, "CMD9 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76))); - - //Calculate total number of blocks and max. data transfer rate supported by the detected card. - GetCardConfigurationData(); - - return Status; -} - - -EFI_STATUS -PerformCardConfiguration ( - VOID - ) -{ - UINTN CmdArgument = 0; - EFI_STATUS Status; - - //Send CMD7 - CmdArgument = gCardInfo.RCA << 16; - Status = SendCmd (CMD7, CMD7_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD7 fails. Status: %x\n", Status)); - return Status; - } - - if ((gCardInfo.CardType != UNKNOWN_CARD) && (gCardInfo.CardType != MMC_CARD)) { - // We could read SCR register, but SD Card Phys spec stats any SD Card shall - // set SCR.SD_BUS_WIDTHS to support 4-bit mode, so why bother? - - // Send ACMD6 (application specific commands must be prefixed with CMD55) - Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument); - if (!EFI_ERROR (Status)) { - // set device into 4-bit data bus mode - Status = SendCmd (ACMD6, ACMD6_INT_EN, 0x2); - if (!EFI_ERROR (Status)) { - // Set host controler into 4-bit mode - MmioOr32 (MMCHS_HCTL, DTW_4_BIT); - DEBUG ((EFI_D_INFO, "SD Memory Card set to 4-bit mode\n")); - } - } - } - - //Send CMD16 to set the block length - CmdArgument = gCardInfo.BlockSize; - Status = SendCmd (CMD16, CMD16_INT_EN, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD16 fails. Status: %x\n", Status)); - return Status; - } - - //Change MMCHS clock frequency to what detected card can support. - UpdateMMCHSClkFrequency(gCardInfo.ClockFrequencySelect); - - return EFI_SUCCESS; -} - - -EFI_STATUS -ReadBlockData ( - IN EFI_BLOCK_IO_PROTOCOL *This, - OUT VOID *Buffer - ) -{ - UINTN MmcStatus; - UINTN *DataBuffer = Buffer; - UINTN DataSize = This->Media->BlockSize/4; - UINTN Count; - UINTN RetryCount = 0; - - //Check controller status to make sure there is no error. - while (RetryCount < MAX_RETRY_COUNT) { - do { - //Read Status. - MmcStatus = MmioRead32 (MMCHS_STAT); - } while(MmcStatus == 0); - - //Check if Buffer read ready (BRR) bit is set? - if (MmcStatus & BRR) { - - //Clear BRR bit - MmioOr32 (MMCHS_STAT, BRR); - - //Read block worth of data. - for (Count = 0; Count < DataSize; Count++) { - *DataBuffer++ = MmioRead32 (MMCHS_DATA); - } - break; - } - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - - -EFI_STATUS -WriteBlockData ( - IN EFI_BLOCK_IO_PROTOCOL *This, - OUT VOID *Buffer - ) -{ - UINTN MmcStatus; - UINTN *DataBuffer = Buffer; - UINTN DataSize = This->Media->BlockSize/4; - UINTN Count; - UINTN RetryCount = 0; - - //Check controller status to make sure there is no error. - while (RetryCount < MAX_RETRY_COUNT) { - do { - //Read Status. - MmcStatus = MmioRead32 (MMCHS_STAT); - } while(MmcStatus == 0); - - //Check if Buffer write ready (BWR) bit is set? - if (MmcStatus & BWR) { - - //Clear BWR bit - MmioOr32 (MMCHS_STAT, BWR); - - //Write block worth of data. - for (Count = 0; Count < DataSize; Count++) { - MmioWrite32 (MMCHS_DATA, *DataBuffer++); - } - - break; - } - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -DmaBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINTN Lba, - IN OUT VOID *Buffer, - IN UINTN BlockCount, - IN OPERATION_TYPE OperationType - ) -{ - EFI_STATUS Status; - UINTN DmaSize = 0; - UINTN Cmd = 0; - UINTN CmdInterruptEnable; - UINTN CmdArgument; - VOID *BufferMap; - EFI_PHYSICAL_ADDRESS BufferAddress; - OMAP_DMA4 Dma4; - DMA_MAP_OPERATION DmaOperation; - EFI_STATUS MmcStatus; - UINTN RetryCount = 0; - -CpuDeadLoop (); - // Map passed in buffer for DMA xfer - DmaSize = BlockCount * This->Media->BlockSize; - Status = DmaMap (DmaOperation, Buffer, &DmaSize, &BufferAddress, &BufferMap); - if (EFI_ERROR (Status)) { - return Status; - } - - ZeroMem (&DmaOperation, sizeof (DMA_MAP_OPERATION)); - - - Dma4.DataType = 2; // DMA4_CSDPi[1:0] 32-bit elements from MMCHS_DATA - - Dma4.SourceEndiansim = 0; // DMA4_CSDPi[21] - - Dma4.DestinationEndianism = 0; // DMA4_CSDPi[19] - - Dma4.SourcePacked = 0; // DMA4_CSDPi[6] - - Dma4.DestinationPacked = 0; // DMA4_CSDPi[13] - - Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi (TRM 4K is optimum value) - - Dma4.NumberOfFramePerTransferBlock = BlockCount; // DMA4_CFNi - - Dma4.ReadPriority = 0; // DMA4_CCRi[6] Low priority read - - Dma4.WritePriority = 0; // DMA4_CCRi[23] Prefetech disabled - - - //Populate the command information based on the operation type. - if (OperationType == READ) { - Cmd = CMD18; //Multiple block read - CmdInterruptEnable = CMD18_INT_EN; - DmaOperation = MapOperationBusMasterCommonBuffer; - - Dma4.ReadPortAccessType =0 ; // DMA4_CSDPi[8:7] Can not burst MMCHS_DATA reg - - Dma4.WritePortAccessType = 3; // DMA4_CSDPi[15:14] Memory burst 16x32 - - Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted - - - - Dma4.SourceStartAddress = MMCHS_DATA; // DMA4_CSSAi - - Dma4.DestinationStartAddress = (UINT32)BufferAddress; // DMA4_CDSAi - - Dma4.SourceElementIndex = 1; // DMA4_CSEi - - Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi - - Dma4.DestinationElementIndex = 1; // DMA4_CDEi - - Dma4.DestinationFrameIndex = 0; // DMA4_CDFi - - - - Dma4.ReadPortAccessMode = 0; // DMA4_CCRi[13:12] Always read MMCHS_DATA - - Dma4.WritePortAccessMode = 1; // DMA4_CCRi[15:14] Post increment memory address - - Dma4.ReadRequestNumber = 0x1e; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_RX (61) - - Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3e == 62 (one based) - - } else if (OperationType == WRITE) { - Cmd = CMD25; //Multiple block write - CmdInterruptEnable = CMD25_INT_EN; - DmaOperation = MapOperationBusMasterRead; - - Dma4.ReadPortAccessType = 3; // DMA4_CSDPi[8:7] Memory burst 16x32 - - Dma4.WritePortAccessType = 0; // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg - - Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted ??? - - - - Dma4.SourceStartAddress = (UINT32)BufferAddress; // DMA4_CSSAi - - Dma4.DestinationStartAddress = MMCHS_DATA; // DMA4_CDSAi - - Dma4.SourceElementIndex = 1; // DMA4_CSEi - - Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi - - Dma4.DestinationElementIndex = 1; // DMA4_CDEi - - Dma4.DestinationFrameIndex = 0; // DMA4_CDFi - - - - Dma4.ReadPortAccessMode = 1; // DMA4_CCRi[13:12] Post increment memory address - - Dma4.WritePortAccessMode = 0; // DMA4_CCRi[15:14] Always write MMCHS_DATA - - Dma4.ReadRequestNumber = 0x1d; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_TX (60) - - Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3d == 61 (one based) - - } else { - return EFI_INVALID_PARAMETER; - } - - - EnableDmaChannel (2, &Dma4); - - - //Set command argument based on the card access mode (Byte mode or Block mode) - if (gCardInfo.OCRData.AccessMode & BIT1) { - CmdArgument = Lba; - } else { - CmdArgument = Lba * This->Media->BlockSize; - } - - //Send Command. - Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status)); - return Status; - } - - //Check for the Transfer completion. - while (RetryCount < MAX_RETRY_COUNT) { - //Read Status - do { - MmcStatus = MmioRead32 (MMCHS_STAT); - } while (MmcStatus == 0); - - //Check if Transfer complete (TC) bit is set? - if (MmcStatus & TC) { - break; - } else { - DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus)); - //Check if DEB, DCRC or DTO interrupt occured. - if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) { - //There was an error during the data transfer. - - //Set SRD bit to 1 and wait until it return to 0x0. - MmioOr32 (MMCHS_SYSCTL, SRD); - while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0); - - DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR); - DmaUnmap (BufferMap); - return EFI_DEVICE_ERROR; - } - } - RetryCount++; - } - - DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR); - Status = DmaUnmap (BufferMap); - - if (RetryCount == MAX_RETRY_COUNT) { - DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n")); - return EFI_TIMEOUT; - } - - return Status; -} - - -EFI_STATUS -TransferBlock ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINTN Lba, - IN OUT VOID *Buffer, - IN OPERATION_TYPE OperationType - ) -{ - EFI_STATUS Status; - UINTN MmcStatus; - UINTN RetryCount = 0; - UINTN Cmd = 0; - UINTN CmdInterruptEnable = 0; - UINTN CmdArgument = 0; - - - //Populate the command information based on the operation type. - if (OperationType == READ) { - Cmd = CMD17; //Single block read - CmdInterruptEnable = CMD18_INT_EN; - } else if (OperationType == WRITE) { - Cmd = CMD24; //Single block write - CmdInterruptEnable = CMD24_INT_EN; - } - - //Set command argument based on the card access mode (Byte mode or Block mode) - if (gCardInfo.OCRData.AccessMode & BIT1) { - CmdArgument = Lba; - } else { - CmdArgument = Lba * This->Media->BlockSize; - } - - //Send Command. - Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status)); - return Status; - } - - //Read or Write data. - if (OperationType == READ) { - Status = ReadBlockData (This, Buffer); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "ReadBlockData fails.\n")); - return Status; - } - } else if (OperationType == WRITE) { - Status = WriteBlockData (This, Buffer); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "WriteBlockData fails.\n")); - return Status; - } - } - - //Check for the Transfer completion. - while (RetryCount < MAX_RETRY_COUNT) { - //Read Status - do { - MmcStatus = MmioRead32 (MMCHS_STAT); - } while (MmcStatus == 0); - - //Check if Transfer complete (TC) bit is set? - if (MmcStatus & TC) { - break; - } else { - DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus)); - //Check if DEB, DCRC or DTO interrupt occured. - if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) { - //There was an error during the data transfer. - - //Set SRD bit to 1 and wait until it return to 0x0. - MmioOr32 (MMCHS_SYSCTL, SRD); - while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0); - - return EFI_DEVICE_ERROR; - } - } - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n")); - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -BOOLEAN -CardPresent ( - VOID - ) -{ - EFI_STATUS Status; - UINT8 Data; - - // - // Card detect is a GPIO0 on the TPS65950 - // - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data); - if (EFI_ERROR (Status)) { - return FALSE; - } - - if ((Data & CARD_DETECT_BIT) == CARD_DETECT_BIT) { - // No Card present - return FALSE; - } else { - return TRUE; - } -} - -EFI_STATUS -DetectCard ( - VOID - ) -{ - EFI_STATUS Status; - - if (!CardPresent ()) { - return EFI_NO_MEDIA; - } - - //Initialize MMC host controller clocks. - Status = InitializeMMCHS (); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "Initialize MMC host controller fails. Status: %x\n", Status)); - return Status; - } - - //Software reset of the MMCHS host controller. - MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); - - //Soft reset for all. - MmioWrite32 (MMCHS_SYSCTL, SRA); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0); - - //Voltage capabilities initialization. Activate VS18 and VS30. - MmioOr32 (MMCHS_CAPA, (VS30 | VS18)); - - //Wakeup configuration - MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP); - MmioOr32 (MMCHS_HCTL, IWE); - - //MMCHS Controller default initialization - MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); - - MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); - - //Enable internal clock - MmioOr32 (MMCHS_SYSCTL, ICE); - - //Set the clock frequency to 80KHz. - UpdateMMCHSClkFrequency (CLKD_80KHZ); - - //Enable SD bus power. - MmioOr32 (MMCHS_HCTL, (SDBP_ON)); - - //Poll till SD bus power bit is set. - while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON); - - //Card idenfication - Status = PerformCardIdenfication (); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "No MMC/SD card detected.\n")); - return Status; - } - - //Get CSD (Card specific data) for the detected card. - Status = GetCardSpecificData(); - if (EFI_ERROR(Status)) { - return Status; - } - - //Configure the card in data transfer mode. - Status = PerformCardConfiguration(); - if (EFI_ERROR(Status)) { - return Status; - } - - //Patch the Media structure. - gMMCHSMedia.LastBlock = (gCardInfo.NumBlocks - 1); - gMMCHSMedia.BlockSize = gCardInfo.BlockSize; - gMMCHSMedia.ReadOnly = (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23; - gMMCHSMedia.MediaPresent = TRUE; - gMMCHSMedia.MediaId++; - - DEBUG ((EFI_D_INFO, "SD Card Media Change on Handle 0x%08x\n", gImageHandle)); - - return Status; -} - -#define MAX_MMCHS_TRANSFER_SIZE 0x4000 - -EFI_STATUS -SdReadWrite ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINTN Lba, - OUT VOID *Buffer, - IN UINTN BufferSize, - IN OPERATION_TYPE OperationType - ) -{ - EFI_STATUS Status = EFI_SUCCESS; - UINTN RetryCount = 0; - UINTN BlockCount; - UINTN BytesToBeTranferedThisPass = 0; - UINTN BytesRemainingToBeTransfered; - EFI_TPL OldTpl; - - BOOLEAN Update; - - - - Update = FALSE; - - if (gMediaChange) { - Update = TRUE; - Status = DetectCard (); - if (EFI_ERROR (Status)) { - // We detected a removal - gMMCHSMedia.MediaPresent = FALSE; - gMMCHSMedia.LastBlock = 0; - gMMCHSMedia.BlockSize = 512; // Should be zero but there is a bug in DiskIo - gMMCHSMedia.ReadOnly = FALSE; - } - gMediaChange = FALSE; - } else if (!gMMCHSMedia.MediaPresent) { - Status = EFI_NO_MEDIA; - goto Done; - } - - if (Update) { - DEBUG ((EFI_D_INFO, "SD Card ReinstallProtocolInterface ()\n")); - gBS->ReinstallProtocolInterface ( - gImageHandle, - &gEfiBlockIoProtocolGuid, - &gBlockIo, - &gBlockIo - ); - return EFI_MEDIA_CHANGED; - } - - if (EFI_ERROR (Status)) { - goto Done; - } - - if (Buffer == NULL) { - Status = EFI_INVALID_PARAMETER; - goto Done; - } - - if (Lba > This->Media->LastBlock) { - Status = EFI_INVALID_PARAMETER; - goto Done; - } - - if ((BufferSize % This->Media->BlockSize) != 0) { - Status = EFI_BAD_BUFFER_SIZE; - goto Done; - } - - //Check if the data lines are not in use. - while ((RetryCount++ < MAX_RETRY_COUNT) && ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) != DATI_ALLOWED)); - if (RetryCount == MAX_RETRY_COUNT) { - Status = EFI_TIMEOUT; - goto Done; - } - - OldTpl = gBS->RaiseTPL (TPL_NOTIFY); - - BytesRemainingToBeTransfered = BufferSize; - while (BytesRemainingToBeTransfered > 0) { - - if (gMediaChange) { - Status = EFI_NO_MEDIA; - DEBUG ((EFI_D_INFO, "SdReadWrite() EFI_NO_MEDIA due to gMediaChange\n")); - goto DoneRestoreTPL; - } - - // Turn OFF DMA path until it is debugged - // BytesToBeTranferedThisPass = (BytesToBeTranferedThisPass >= MAX_MMCHS_TRANSFER_SIZE) ? MAX_MMCHS_TRANSFER_SIZE : BytesRemainingToBeTransfered; - BytesToBeTranferedThisPass = This->Media->BlockSize; - - BlockCount = BytesToBeTranferedThisPass/This->Media->BlockSize; - - if (BlockCount > 1) { - Status = DmaBlocks (This, Lba, Buffer, BlockCount, OperationType); - } else { - //Transfer a block worth of data. - Status = TransferBlock (This, Lba, Buffer, OperationType); - } - - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "TransferBlockData fails. %x\n", Status)); - goto DoneRestoreTPL; - } - - BytesRemainingToBeTransfered -= BytesToBeTranferedThisPass; - Lba += BlockCount; - Buffer = (UINT8 *)Buffer + This->Media->BlockSize; - } - -DoneRestoreTPL: - - gBS->RestoreTPL (OldTpl); - -Done: - - return Status; - -} - - -/** - - Reset the Block Device. - - - - @param This Indicates a pointer to the calling context. - - @param ExtendedVerification Driver may perform diagnostics on reset. - - - - @retval EFI_SUCCESS The device was reset. - - @retval EFI_DEVICE_ERROR The device is not functioning properly and could - - not be reset. - - - -**/ -EFI_STATUS -EFIAPI -MMCHSReset ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN BOOLEAN ExtendedVerification - ) -{ - return EFI_SUCCESS; -} - - -/** - - Read BufferSize bytes from Lba into Buffer. - - - - @param This Indicates a pointer to the calling context. - - @param MediaId Id of the media, changes every time the media is replaced. - - @param Lba The starting Logical Block Address to read from - - @param BufferSize Size of Buffer, must be a multiple of device block size. - - @param Buffer A pointer to the destination buffer for the data. The caller is - - responsible for either having implicit or explicit ownership of the buffer. - - - - @retval EFI_SUCCESS The data was read correctly from the device. - - @retval EFI_DEVICE_ERROR The device reported an error while performing the read. - - @retval EFI_NO_MEDIA There is no media in the device. - - @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device. - - @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. - - @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, - - or the buffer is not on proper alignment. - -EFI_STATUS - -**/ -EFI_STATUS -EFIAPI -MMCHSReadBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN EFI_LBA Lba, - IN UINTN BufferSize, - OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - - //Perform Read operation. - Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, READ); - - return Status; - -} - - -/** - - Write BufferSize bytes from Lba into Buffer. - - - - @param This Indicates a pointer to the calling context. - - @param MediaId The media ID that the write request is for. - - @param Lba The starting logical block address to be written. The caller is - - responsible for writing to only legitimate locations. - - @param BufferSize Size of Buffer, must be a multiple of device block size. - - @param Buffer A pointer to the source buffer for the data. - - - - @retval EFI_SUCCESS The data was written correctly to the device. - - @retval EFI_WRITE_PROTECTED The device can not be written to. - - @retval EFI_DEVICE_ERROR The device reported an error while performing the write. - - @retval EFI_NO_MEDIA There is no media in the device. - - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device. - - @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. - - @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, - - or the buffer is not on proper alignment. - - - -**/ -EFI_STATUS -EFIAPI -MMCHSWriteBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN EFI_LBA Lba, - IN UINTN BufferSize, - IN VOID *Buffer - ) -{ - EFI_STATUS Status; - - //Perform write operation. - Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, WRITE); - - - return Status; - -} - - -/** - - Flush the Block Device. - - - - @param This Indicates a pointer to the calling context. - - - - @retval EFI_SUCCESS All outstanding data was written to the device - - @retval EFI_DEVICE_ERROR The device reported an error while writting back the data - - @retval EFI_NO_MEDIA There is no media in the device. - - - -**/ -EFI_STATUS -EFIAPI -MMCHSFlushBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This - ) -{ - return EFI_SUCCESS; -} - - -EFI_BLOCK_IO_PROTOCOL gBlockIo = { - EFI_BLOCK_IO_INTERFACE_REVISION, // Revision - &gMMCHSMedia, // *Media - MMCHSReset, // Reset - MMCHSReadBlocks, // ReadBlocks - MMCHSWriteBlocks, // WriteBlocks - MMCHSFlushBlocks // FlushBlocks -}; - - -/** - - Timer callback to convert card present hardware into a boolean that indicates - - a media change event has happened. If you just check the GPIO you could see - - card 1 and then check again after card 1 was removed and card 2 was inserted - - and you would still see media present. Thus you need the timer tick to catch - - the toggle event. - - - - @param Event Event whose notification function is being invoked. - - @param Context The pointer to the notification function's context, - - which is implementation-dependent. Not used. - - - -**/ -VOID -EFIAPI -TimerCallback ( - IN EFI_EVENT Event, - IN VOID *Context - ) -{ - BOOLEAN Present; - - Present = CardPresent (); - if (gMMCHSMedia.MediaPresent) { - if (!Present && !gMediaChange) { - gMediaChange = TRUE; - } - } else { - if (Present && !gMediaChange) { - gMediaChange = TRUE; - } - } -} - - -EFI_STATUS -EFIAPI -MMCHSInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); - ASSERT_EFI_ERROR(Status); - - ZeroMem (&gCardInfo, sizeof (CARD_INFO)); - - Status = gBS->CreateEvent (EVT_TIMER | EVT_NOTIFY_SIGNAL, TPL_CALLBACK, TimerCallback, NULL, &gTimerEvent); - ASSERT_EFI_ERROR (Status); - - Status = gBS->SetTimer (gTimerEvent, TimerPeriodic, FixedPcdGet32 (PcdMmchsTimerFreq100NanoSeconds)); - ASSERT_EFI_ERROR (Status); - - //Publish BlockIO. - Status = gBS->InstallMultipleProtocolInterfaces ( - &ImageHandle, - &gEfiBlockIoProtocolGuid, &gBlockIo, - &gEfiDevicePathProtocolGuid, &gMmcHsDevicePath, - NULL - ); - return Status; -} diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h deleted file mode 100644 index 06960a3bd6ce..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h +++ /dev/null @@ -1,175 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _MMCHS_H_ -#define _MMCHS_H_ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#define MAX_RETRY_COUNT (100*5) - -#define HCS BIT30 //Host capacity support/1 = Supporting high capacity -#define CCS BIT30 //Card capacity status/1 = High capacity card -typedef struct { - UINT32 Reserved0: 7; // 0 - UINT32 V170_V195: 1; // 1.70V - 1.95V - UINT32 V200_V260: 7; // 2.00V - 2.60V - UINT32 V270_V360: 9; // 2.70V - 3.60V - UINT32 RESERVED_1: 5; // Reserved - UINT32 AccessMode: 2; // 00b (byte mode), 10b (sector mode) - UINT32 Busy: 1; // This bit is set to LOW if the card has not finished the power up routine -}OCR; - -typedef struct { - UINT32 NOT_USED; // 1 [0:0] - UINT32 CRC; // CRC7 checksum [7:1] - UINT32 MDT; // Manufacturing date [19:8] - UINT32 RESERVED_1; // Reserved [23:20] - UINT32 PSN; // Product serial number [55:24] - UINT8 PRV; // Product revision [63:56] - UINT8 PNM[5]; // Product name [64:103] - UINT16 OID; // OEM/Application ID [119:104] - UINT8 MID; // Manufacturer ID [127:120] -}CID; - -typedef struct { - UINT8 NOT_USED: 1; // Not used, always 1 [0:0] - UINT8 CRC: 7; // CRC [7:1] - - UINT8 RESERVED_1: 2; // Reserved [9:8] - UINT8 FILE_FORMAT: 2; // File format [11:10] - UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12] - UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13] - UINT8 COPY: 1; // Copy flag (OTP) [14:14] - UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15] - - UINT16 RESERVED_2: 5; // Reserved [20:16] - UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21] - UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22] - UINT16 R2W_FACTOR: 3; // Write speed factor [28:26] - UINT16 RESERVED_3: 2; // Reserved [30:29] - UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31] - - UINT32 WP_GRP_SIZE: 7; // Write protect group size [38:32] - UINT32 SECTOR_SIZE: 7; // Erase sector size [45:39] - UINT32 ERASE_BLK_EN: 1; // Erase single block enable [46:46] - UINT32 C_SIZE_MULT: 3; // Device size multiplier [49:47] - UINT32 VDD_W_CURR_MAX: 3; // Max. write current @ VDD max [52:50] - UINT32 VDD_W_CURR_MIN: 3; // Max. write current @ VDD min [55:53] - UINT32 VDD_R_CURR_MAX: 3; // Max. read current @ VDD max [58:56] - UINT32 VDD_R_CURR_MIN: 3; // Max. read current @ VDD min [61:59] - UINT32 C_SIZELow2: 2; // Device size [63:62] - - UINT32 C_SIZEHigh10: 10;// Device size [73:64] - UINT32 RESERVED_4: 2; // Reserved [75:74] - UINT32 DSR_IMP: 1; // DSR implemented [76:76] - UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77] - UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78] - UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79] - UINT32 READ_BL_LEN: 4; // Max. read data block length [83:80] - UINT32 CCC: 12;// Card command classes [95:84] - - UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96] - UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104] - UINT8 TAAC ; // Data read access-time 1 [119:112] - - UINT8 RESERVED_5: 6; // Reserved [125:120] - UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126] -}CSD; - -typedef struct { - UINT8 NOT_USED: 1; // Not used, always 1 [0:0] - UINT8 CRC: 7; // CRC [7:1] - UINT8 RESERVED_1: 2; // Reserved [9:8] - UINT8 FILE_FORMAT: 2; // File format [11:10] - UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12] - UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13] - UINT8 COPY: 1; // Copy flag (OTP) [14:14] - UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15] - UINT16 RESERVED_2: 5; // Reserved [20:16] - UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21] - UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22] - UINT16 R2W_FACTOR: 3; // Write speed factor [28:26] - UINT16 RESERVED_3: 2; // Reserved [30:29] - UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31] - UINT16 WP_GRP_SIZE: 7; // Write protect group size [38:32] - UINT16 SECTOR_SIZE: 7; // Erase sector size [45:39] - UINT16 ERASE_BLK_EN: 1; // Erase single block enable [46:46] - UINT16 RESERVED_4: 1; // Reserved [47:47] - UINT32 C_SIZELow16: 16;// Device size [69:48] - UINT32 C_SIZEHigh6: 6; // Device size [69:48] - UINT32 RESERVED_5: 6; // Reserved [75:70] - UINT32 DSR_IMP: 1; // DSR implemented [76:76] - UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77] - UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78] - UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79] - UINT16 READ_BL_LEN: 4; // Max. read data block length [83:80] - UINT16 CCC: 12;// Card command classes [95:84] - UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96] - UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104] - UINT8 TAAC ; // Data read access-time 1 [119:112] - UINT8 RESERVED_6: 6; // 0 [125:120] - UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126] -}CSD_SDV2; - -typedef enum { - UNKNOWN_CARD, - MMC_CARD, //MMC card - SD_CARD, //SD 1.1 card - SD_CARD_2, //SD 2.0 or above standard card - SD_CARD_2_HIGH //SD 2.0 or above high capacity card -} CARD_TYPE; - -typedef enum { - READ, - WRITE -} OPERATION_TYPE; - -typedef struct { - UINT16 RCA; - UINTN BlockSize; - UINTN NumBlocks; - UINTN ClockFrequencySelect; - CARD_TYPE CardType; - OCR OCRData; - CID CIDData; - CSD CSDData; -} CARD_INFO; - -EFI_STATUS -DetectCard ( - VOID - ); - -extern EFI_BLOCK_IO_PROTOCOL gBlockIo; - -#endif diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf deleted file mode 100644 index e40abdc73c4d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf +++ /dev/null @@ -1,54 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = MMCHS - FILE_GUID = 100c2cfa-b586-4198-9b4c-1683d195b1da - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = MMCHSInitialize - - -[Sources.common] - MMCHS.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - PcdLib - UefiLib - UefiDriverEntryPoint - MemoryAllocationLib - IoLib - OmapDmaLib - DmaLib - -[Guids] - -[Protocols] - gEfiBlockIoProtocolGuid - gEfiCpuArchProtocolGuid - gEfiDevicePathProtocolGuid - gEmbeddedExternalDeviceProtocolGuid - -[Pcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base - gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds - -[depex] - gEmbeddedExternalDeviceProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c deleted file mode 100755 index ad922a18e348..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c +++ /dev/null @@ -1,677 +0,0 @@ -/** @file -* -* Copyright (c) 2008 - 2009, Apple Inc. All rights reserved. -* Copyright (c) 2011 - 2014, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#include "MmcHostDxe.h" - -EMBEDDED_EXTERNAL_DEVICE *gTPS65950; -UINT8 mMaxDataTransferRate = 0; -UINT32 mRca = 0; -BOOLEAN mBitModeSet = FALSE; - - -typedef struct { - VENDOR_DEVICE_PATH Mmc; - EFI_DEVICE_PATH End; -} MMCHS_DEVICE_PATH; - -MMCHS_DEVICE_PATH gMMCDevicePath = { - { - { - HARDWARE_DEVICE_PATH, - HW_VENDOR_DP, - { (UINT8)(sizeof(VENDOR_DEVICE_PATH)), (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8) }, - }, - { 0xb615f1f5, 0x5088, 0x43cd, { 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00 } } - }, - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 } - } -}; - -BOOLEAN -IgnoreCommand ( - UINT32 Command - ) -{ - switch(Command) { - case MMC_CMD12: - return TRUE; - case MMC_CMD13: - return TRUE; - default: - return FALSE; - } -} - -UINT32 -TranslateCommand ( - UINT32 Command - ) -{ - UINT32 Translation; - - switch(Command) { - case MMC_CMD2: - Translation = CMD2; - break; - case MMC_CMD3: - Translation = CMD3; - break; - /*case MMC_CMD6: - Translation = CMD6; - break;*/ - case MMC_CMD7: - Translation = CMD7; - break; - case MMC_CMD8: - Translation = CMD8; - break; - case MMC_CMD9: - Translation = CMD9; - break; - /*case MMC_CMD12: - Translation = CMD12; - break; - case MMC_CMD13: - Translation = CMD13; - break;*/ - case MMC_CMD16: - Translation = CMD16; - break; - case MMC_CMD17: - Translation = 0x113A0014;//CMD17; - break; - case MMC_CMD24: - Translation = CMD24 | 4; - break; - case MMC_CMD55: - Translation = CMD55; - break; - case MMC_ACMD41: - Translation = ACMD41; - break; - default: - Translation = Command; - } - - return Translation; -} - -VOID -CalculateCardCLKD ( - UINTN *ClockFrequencySelect - ) -{ - UINTN TransferRateValue = 0; - UINTN TimeValue = 0 ; - UINTN Frequency = 0; - - DEBUG ((DEBUG_BLKIO, "CalculateCardCLKD()\n")); - - // For SD Cards we would need to send CMD6 to set - // speeds abouve 25MHz. High Speed mode 50 MHz and up - - // Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED) - switch (mMaxDataTransferRate & 0x7) { // 2 - case 0: - TransferRateValue = 100 * 1000; - break; - - case 1: - TransferRateValue = 1 * 1000 * 1000; - break; - - case 2: - TransferRateValue = 10 * 1000 * 1000; - break; - - case 3: - TransferRateValue = 100 * 1000 * 1000; - break; - - default: - DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n")); - ASSERT(FALSE); - return; - } - - //Calculate Time value (Bits 6:3 of TRAN_SPEED) - switch ((mMaxDataTransferRate >> 3) & 0xF) { // 6 - case 1: - TimeValue = 10; - break; - - case 2: - TimeValue = 12; - break; - - case 3: - TimeValue = 13; - break; - - case 4: - TimeValue = 15; - break; - - case 5: - TimeValue = 20; - break; - - case 6: - TimeValue = 25; - break; - - case 7: - TimeValue = 30; - break; - - case 8: - TimeValue = 35; - break; - - case 9: - TimeValue = 40; - break; - - case 10: - TimeValue = 45; - break; - - case 11: - TimeValue = 50; - break; - - case 12: - TimeValue = 55; - break; - - case 13: - TimeValue = 60; - break; - - case 14: - TimeValue = 70; - break; - - case 15: - TimeValue = 80; - break; - - default: - DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n")); - ASSERT(FALSE); - return; - } - - Frequency = TransferRateValue * TimeValue/10; - - // Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field. - *ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1); - - DEBUG ((DEBUG_BLKIO, "mMaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", mMaxDataTransferRate, Frequency/1000, *ClockFrequencySelect)); -} - -VOID -UpdateMMCHSClkFrequency ( - UINTN NewCLKD - ) -{ - DEBUG ((DEBUG_BLKIO, "UpdateMMCHSClkFrequency()\n")); - - // Set Clock enable to 0x0 to not provide the clock to the card - MmioAnd32 (MMCHS_SYSCTL, ~CEN); - - // Set new clock frequency. - MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6); - - // Poll till Internal Clock Stable - while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS); - - // Set Clock enable to 0x1 to provide the clock to the card - MmioOr32 (MMCHS_SYSCTL, CEN); -} - -EFI_STATUS -InitializeMMCHS ( - VOID - ) -{ - UINT8 Data; - EFI_STATUS Status; - - DEBUG ((DEBUG_BLKIO, "InitializeMMCHS()\n")); - - // Select Device group to belong to P1 device group in Power IC. - Data = DEV_GRP_P1; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data); - ASSERT_EFI_ERROR(Status); - - // Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage. - Data = VSEL_3_00V; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data); - ASSERT_EFI_ERROR(Status); - - // After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable. - MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); - - // Enable WP GPIO - MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23); - - // Enable Card Detect - Data = CARD_DETECT_ENABLE; - gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data); - - return Status; -} - -BOOLEAN -MMCIsCardPresent ( - IN EFI_MMC_HOST_PROTOCOL *This - ) -{ - EFI_STATUS Status; - UINT8 Data; - - // - // Card detect is a GPIO0 on the TPS65950 - // - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data); - if (EFI_ERROR (Status)) { - return FALSE; - } - - return !(Data & CARD_DETECT_BIT); -} - -BOOLEAN -MMCIsReadOnly ( - IN EFI_MMC_HOST_PROTOCOL *This - ) -{ - /* Note: - * On our BeagleBoard the SD card WP pin is always read as TRUE. - * Probably something wrong with GPIO configuration. - * BeagleBoard-xM uses microSD cards so there is no write protect at all. - * Hence commenting out SD card WP pin read status. - */ - //return (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23; - return 0; - -} - -// TODO -EFI_GUID mPL180MciDevicePathGuid = EFI_CALLER_ID_GUID; - -EFI_STATUS -MMCBuildDevicePath ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN EFI_DEVICE_PATH_PROTOCOL **DevicePath - ) -{ - EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode; - - NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH,HW_VENDOR_DP,sizeof(VENDOR_DEVICE_PATH)); - CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid,&mPL180MciDevicePathGuid); - *DevicePath = NewDevicePathNode; - return EFI_SUCCESS; -} - -EFI_STATUS -MMCSendCommand ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN MMC_CMD MmcCmd, - IN UINT32 Argument - ) -{ - UINTN MmcStatus; - UINTN RetryCount = 0; - - if (IgnoreCommand(MmcCmd)) - return EFI_SUCCESS; - - MmcCmd = TranslateCommand(MmcCmd); - - //DEBUG ((EFI_D_ERROR, "MMCSendCommand(%d)\n", MmcCmd)); - - // Check if command line is in use or not. Poll till command line is available. - while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); - - // Provide the block size. - MmioWrite32 (MMCHS_BLK, BLEN_512BYTES); - - // Setting Data timeout counter value to max value. - MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL); - - // Clear Status register. - MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF); - - // Set command argument register - MmioWrite32 (MMCHS_ARG, Argument); - - //TODO: fix this - //Enable interrupt enable events to occur - //MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal); - - // Send a command - MmioWrite32 (MMCHS_CMD, MmcCmd); - - // Check for the command status. - while (RetryCount < MAX_RETRY_COUNT) { - do { - MmcStatus = MmioRead32 (MMCHS_STAT); - } while (MmcStatus == 0); - - // Read status of command response - if ((MmcStatus & ERRI) != 0) { - - // Perform soft-reset for mmci_cmd line. - MmioOr32 (MMCHS_SYSCTL, SRC); - while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); - - //DEBUG ((EFI_D_INFO, "MmcStatus: 0x%x\n", MmcStatus)); - return EFI_DEVICE_ERROR; - } - - // Check if command is completed. - if ((MmcStatus & CC) == CC) { - MmioWrite32 (MMCHS_STAT, CC); - break; - } - - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - DEBUG ((DEBUG_BLKIO, "MMCSendCommand: Timeout\n")); - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -MMCNotifyState ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN MMC_STATE State - ) -{ - EFI_STATUS Status; - UINTN FreqSel; - - switch(State) { - case MmcInvalidState: - ASSERT(0); - break; - case MmcHwInitializationState: - mBitModeSet = FALSE; - - DEBUG ((DEBUG_BLKIO, "MMCHwInitializationState()\n")); - Status = InitializeMMCHS (); - if (EFI_ERROR(Status)) { - DEBUG ((DEBUG_BLKIO, "Initialize MMC host controller fails. Status: %x\n", Status)); - return Status; - } - - // Software reset of the MMCHS host controller. - MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); - - // Soft reset for all. - MmioWrite32 (MMCHS_SYSCTL, SRA); - gBS->Stall(1000); - while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0); - - //Voltage capabilities initialization. Activate VS18 and VS30. - MmioOr32 (MMCHS_CAPA, (VS30 | VS18)); - - // Wakeup configuration - MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP); - MmioOr32 (MMCHS_HCTL, IWE); - - // MMCHS Controller default initialization - MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); - - MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); - - // Enable internal clock - MmioOr32 (MMCHS_SYSCTL, ICE); - - // Set the clock frequency to 80KHz. - UpdateMMCHSClkFrequency (CLKD_80KHZ); - - // Enable SD bus power. - MmioOr32 (MMCHS_HCTL, (SDBP_ON)); - - // Poll till SD bus power bit is set. - while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON); - - // Enable interrupts. - MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | - CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN)); - - // Controller INIT procedure start. - MmioOr32 (MMCHS_CON, INIT); - MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32 (MMCHS_STAT) & CC)); - - // Wait for 1 ms - gBS->Stall (1000); - - // Set CC bit to 0x1 to clear the flag - MmioOr32 (MMCHS_STAT, CC); - - // Retry INIT procedure. - MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32 (MMCHS_STAT) & CC)); - - // End initialization sequence - MmioAnd32 (MMCHS_CON, ~INIT); - - MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON)); - - // Change clock frequency to 400KHz to fit protocol - UpdateMMCHSClkFrequency(CLKD_400KHZ); - - MmioOr32 (MMCHS_CON, OD); - break; - case MmcIdleState: - break; - case MmcReadyState: - break; - case MmcIdentificationState: - break; - case MmcStandByState: - CalculateCardCLKD (&FreqSel); - UpdateMMCHSClkFrequency (FreqSel); - break; - case MmcTransferState: - if (!mBitModeSet) { - Status = MMCSendCommand (This, CMD55, mRca << 16); - if (!EFI_ERROR (Status)) { - // Set device into 4-bit data bus mode - Status = MMCSendCommand (This, ACMD6, 0x2); - if (!EFI_ERROR (Status)) { - // Set host controler into 4-bit mode - MmioOr32 (MMCHS_HCTL, DTW_4_BIT); - DEBUG ((DEBUG_BLKIO, "SD Memory Card set to 4-bit mode\n")); - mBitModeSet = TRUE; - } - } - } - break; - case MmcSendingDataState: - break; - case MmcReceiveDataState: - break; - case MmcProgrammingState: - break; - case MmcDisconnectState: - default: - ASSERT(0); - } - return EFI_SUCCESS; -} - -EFI_STATUS -MMCReceiveResponse ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN MMC_RESPONSE_TYPE Type, - IN UINT32* Buffer - ) -{ - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - if (Type == MMC_RESPONSE_TYPE_R2) { - Buffer[0] = MmioRead32 (MMCHS_RSP10); - Buffer[1] = MmioRead32 (MMCHS_RSP32); - Buffer[2] = MmioRead32 (MMCHS_RSP54); - Buffer[3] = MmioRead32 (MMCHS_RSP76); - } else { - Buffer[0] = MmioRead32 (MMCHS_RSP10); - } - - if (Type == MMC_RESPONSE_TYPE_CSD) { - mMaxDataTransferRate = Buffer[3] & 0xFF; - } else if (Type == MMC_RESPONSE_TYPE_RCA) { - mRca = Buffer[0] >> 16; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -MMCReadBlockData ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN EFI_LBA Lba, - IN UINTN Length, - IN UINT32* Buffer - ) -{ - UINTN MmcStatus; - UINTN Count; - UINTN RetryCount = 0; - - DEBUG ((DEBUG_BLKIO, "MMCReadBlockData(LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n", Lba, Length, Buffer)); - - // Check controller status to make sure there is no error. - while (RetryCount < MAX_RETRY_COUNT) { - do { - // Read Status. - MmcStatus = MmioRead32 (MMCHS_STAT); - } while(MmcStatus == 0); - - // Check if Buffer read ready (BRR) bit is set? - if (MmcStatus & BRR) { - - // Clear BRR bit - MmioOr32 (MMCHS_STAT, BRR); - - for (Count = 0; Count < Length / 4; Count++) { - *Buffer++ = MmioRead32(MMCHS_DATA); - } - break; - } - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -MMCWriteBlockData ( - IN EFI_MMC_HOST_PROTOCOL *This, - IN EFI_LBA Lba, - IN UINTN Length, - IN UINT32* Buffer - ) -{ - UINTN MmcStatus; - UINTN Count; - UINTN RetryCount = 0; - - // Check controller status to make sure there is no error. - while (RetryCount < MAX_RETRY_COUNT) { - do { - // Read Status. - MmcStatus = MmioRead32 (MMCHS_STAT); - } while(MmcStatus == 0); - - // Check if Buffer write ready (BWR) bit is set? - if (MmcStatus & BWR) { - - // Clear BWR bit - MmioOr32 (MMCHS_STAT, BWR); - - // Write block worth of data. - for (Count = 0; Count < Length / 4; Count++) { - MmioWrite32 (MMCHS_DATA, *Buffer++); - } - - break; - } - RetryCount++; - } - - if (RetryCount == MAX_RETRY_COUNT) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -EFI_MMC_HOST_PROTOCOL gMMCHost = { - MMC_HOST_PROTOCOL_REVISION, - MMCIsCardPresent, - MMCIsReadOnly, - MMCBuildDevicePath, - MMCNotifyState, - MMCSendCommand, - MMCReceiveResponse, - MMCReadBlockData, - MMCWriteBlockData -}; - -EFI_STATUS -MMCInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - EFI_HANDLE Handle = NULL; - - DEBUG ((DEBUG_BLKIO, "MMCInitialize()\n")); - - Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); - ASSERT_EFI_ERROR(Status); - - Status = gBS->InstallMultipleProtocolInterfaces ( - &Handle, - &gEfiMmcHostProtocolGuid, &gMMCHost, - NULL - ); - ASSERT_EFI_ERROR (Status); - - return Status; -} diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h deleted file mode 100755 index 0748ddfa473f..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h +++ /dev/null @@ -1,44 +0,0 @@ -/** @file -* -* Copyright (c) 2011, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#ifndef _MMC_HOST_DXE_H_ -#define _MMC_HOST_DXE_H_ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#define MAX_RETRY_COUNT (100*5) - -extern EFI_BLOCK_IO_PROTOCOL gBlockIo; - -#endif diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf deleted file mode 100755 index f6cca8c88050..000000000000 --- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf +++ /dev/null @@ -1,53 +0,0 @@ -# Copyright (c) 2011, ARM Limited. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = MMC - FILE_GUID = 100c2cfa-b586-4198-9b4c-1683d195b1da - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = MMCInitialize - - -[Sources.common] - MmcHostDxe.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - PcdLib - UefiLib - UefiDriverEntryPoint - MemoryAllocationLib - IoLib - OmapDmaLib - DmaLib - -[Guids] - -[Protocols] - gEfiBlockIoProtocolGuid - gEfiCpuArchProtocolGuid - gEfiDevicePathProtocolGuid - gEmbeddedExternalDeviceProtocolGuid - gEfiMmcHostProtocolGuid - -[Pcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base - gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds - -[depex] - gEmbeddedExternalDeviceProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec b/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec deleted file mode 100644 index 8924e2ac4757..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec +++ /dev/null @@ -1,58 +0,0 @@ -#/** @file -# Omap35xx SoC package. -# -# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials are licensed and made available under -# the terms and conditions of the BSD License which accompanies this distribution. -# The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - DEC_SPECIFICATION = 0x00010005 - PACKAGE_NAME = Omap35xxPkg - PACKAGE_GUID = D196A631-B7B7-4953-A3EE-0F773CBABF20 - PACKAGE_VERSION = 0.1 - -################################################################################ -# -# Include Section - list of Include Paths that are provided by this package. -# Comments are used for Keywords and Module Types. -# -# Supported Module Types: -# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION -# -################################################################################ -[Includes.common] - Include # Root include for the package - -[LibraryClasses] - ## @libraryclass Abstract location of basic OMAP components - ## - OmapLib|Include/Library/OmapLib.h - - ## @libraryclass Abstract OMAP and ARM DMA, modeled after PCI IO protocol - ## - OmapDmaLib|Include/Library/OmapDmaLib.h - - -[Guids.common] - gOmap35xxTokenSpaceGuid = { 0x24b09abe, 0x4e47, 0x481c, { 0xa9, 0xad, 0xce, 0xf1, 0x2c, 0x39, 0x23, 0x27} } - -[PcdsFeatureFlag.common] - -[PcdsFixedAtBuild.common] - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3|UINT32|0x00000202 - gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x00000000|UINT32|0x00000203 - gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x00000000|UINT32|0x00000204 - gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3|UINT32|0x00000205 - gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4|UINT32|0x00000206 - gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer|5|UINT32|0x00000207 - gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds|77|UINT32|0x00000208 - gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds|1000000|UINT32|0x00000209 - diff --git a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc b/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc deleted file mode 100644 index 9056bba831c5..000000000000 --- a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc +++ /dev/null @@ -1,188 +0,0 @@ -#/** @file -# Omap35xx SoC package. -# -# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -################################################################################ -# -# Defines Section - statements that will be processed to create a Makefile. -# -################################################################################ -[Defines] - PLATFORM_NAME = Omap35xxPkg - PLATFORM_GUID = D196A631-B7B7-4953-A3EE-0F773CBABF20 - PLATFORM_VERSION = 0.1 - DSC_SPECIFICATION = 0x00010005 - OUTPUT_DIRECTORY = Build/Omap35xxPkg - SUPPORTED_ARCHITECTURES = ARM - BUILD_TARGETS = DEBUG|RELEASE - SKUID_IDENTIFIER = DEFAULT - DEFINE TARGET_HACK = DEBUG - - -[LibraryClasses.common] - DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf - - ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf - ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf - MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf - - BaseLib|MdePkg/Library/BaseLib/BaseLib.inf - BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf - - PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf - - CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf - DefaultExceptioHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf - PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf - - RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf - - IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf - OmapLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf - OmapDmaLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf - - MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf - UefiLib|MdePkg/Library/UefiLib/UefiLib.inf - UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf - DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf - UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf - - DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf - UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf - UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf - DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf - -# -# Assume everything is fixed at build -# - PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf - - UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf - - # UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf - UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf - - CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf - - -[LibraryClasses.common.DXE_DRIVER] - DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf - - -[LibraryClasses.ARM] - # - # Note: This NULL library feature is not yet in the edk2/BaseTools, but it is checked in to - # the BaseTools project. So you need to build with the BaseTools project util this feature gets synced. - # - NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf - - -[BuildOptions] - XCODE:*_*_ARM_ARCHCC_FLAGS == -arch armv7 -march=armv7 - XCODE:*_*_ARM_ARCHASM_FLAGS == -arch armv7 - XCODE:*_*_ARM_ARCHDLINK_FLAGS == -arch armv7 - - GCC:*_*_ARM_ARCHCC_FLAGS == -march=armv7-a -mthumb - GCC:*_*_ARM_ARCHASM_FLAGS == -march=armv7-a - - RVCT:*_*_ARM_ARCHCC_FLAGS == --cpu 7-A - RVCT:*_*_ARM_ARCHASM_FLAGS == --cpu 7-A - - -################################################################################ -# -# Pcd Section - list of all EDK II PCD Entries defined by this Platform -# -################################################################################ - - -[PcdsFixedAtBuild.common] - -# DEBUG_ASSERT_ENABLED 0x01 -# DEBUG_PRINT_ENABLED 0x02 -# DEBUG_CODE_ENABLED 0x04 -# CLEAR_MEMORY_ENABLED 0x08 -# ASSERT_BREAKPOINT_ENABLED 0x10 -# ASSERT_DEADLOOP_ENABLED 0x20 - gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f - -# DEBUG_INIT 0x00000001 // Initialization -# DEBUG_WARN 0x00000002 // Warnings -# DEBUG_LOAD 0x00000004 // Load events -# DEBUG_FS 0x00000008 // EFI File system -# DEBUG_POOL 0x00000010 // Alloc & Free's -# DEBUG_PAGE 0x00000020 // Alloc & Free's -# DEBUG_INFO 0x00000040 // Verbose -# DEBUG_DISPATCH 0x00000080 // PEI/DXE Dispatchers -# DEBUG_VARIABLE 0x00000100 // Variable -# DEBUG_BM 0x00000400 // Boot Manager -# DEBUG_BLKIO 0x00001000 // BlkIo Driver -# DEBUG_NET 0x00004000 // SNI Driver -# DEBUG_UNDI 0x00010000 // UNDI Driver -# DEBUG_LOADFILE 0x00020000 // UNDI Driver -# DEBUG_EVENT 0x00080000 // Event messages -# DEBUG_ERROR 0x80000000 // Error - gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000004 - - gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07 - - gEmbeddedTokenSpaceGuid.PcdPrePiTempMemorySize|0 - gEmbeddedTokenSpaceGuid.PcdPrePiBfvBaseAddress|0 - gEmbeddedTokenSpaceGuid.PcdPrePiBfvSize|0 - gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|0 - gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize|0 - gEmbeddedTokenSpaceGuid.PcdPrePiHobBase|0x80001000 - gEmbeddedTokenSpaceGuid.PcdPrePiStackBase|0x87FE0000 # stack at top of memory - gEmbeddedTokenSpaceGuid.PcdPrePiStackSize|0x20000 # 128K stack - gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0x80000000 - gArmTokenSpaceGuid.PcdCpuResetAddress|0x80008000 - - gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x6E000000 - gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x4809C000 - - # Console - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3 - - # Timers - gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3 - gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4 - gEmbeddedTokenSpaceGuid.PcdTimerPeriod|100000 - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds|77 - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz|13000000 - - # - # ARM Pcds - # - gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000 - -################################################################################ -# -# Components Section - list of all EDK II Modules needed by this Platform -# -################################################################################ -[Components.common] - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf - - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf - - - diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c deleted file mode 100644 index 17ea03ccf486..000000000000 --- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c +++ /dev/null @@ -1,633 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "PciEmulation.h" - -EMBEDDED_EXTERNAL_DEVICE *gTPS65950; - -#define HOST_CONTROLLER_OPERATION_REG_SIZE 0x44 - -typedef struct { - ACPI_HID_DEVICE_PATH AcpiDevicePath; - PCI_DEVICE_PATH PciDevicePath; - EFI_DEVICE_PATH_PROTOCOL EndDevicePath; -} EFI_PCI_IO_DEVICE_PATH; - -typedef struct { - UINT32 Signature; - EFI_PCI_IO_DEVICE_PATH DevicePath; - EFI_PCI_IO_PROTOCOL PciIoProtocol; - PCI_TYPE00 *ConfigSpace; - PCI_ROOT_BRIDGE RootBridge; - UINTN Segment; -} EFI_PCI_IO_PRIVATE_DATA; - -#define EFI_PCI_IO_PRIVATE_DATA_SIGNATURE SIGNATURE_32('p', 'c', 'i', 'o') -#define EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(a) CR(a, EFI_PCI_IO_PRIVATE_DATA, PciIoProtocol, EFI_PCI_IO_PRIVATE_DATA_SIGNATURE) - -EFI_PCI_IO_DEVICE_PATH PciIoDevicePathTemplate = -{ - { - { ACPI_DEVICE_PATH, ACPI_DP, { sizeof (ACPI_HID_DEVICE_PATH), 0 } }, - EISA_PNP_ID(0x0A03), // HID - 0 // UID - }, - { - { HARDWARE_DEVICE_PATH, HW_PCI_DP, { sizeof (PCI_DEVICE_PATH), 0 } }, - 0, - 0 - }, - { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} } -}; - -STATIC -VOID -ConfigureUSBHost ( - VOID - ) -{ - EFI_STATUS Status; - UINT8 Data = 0; - - // Take USB host out of force-standby mode - MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY - | UHH_SYSCONFIG_CLOCKACTIVITY_ON - | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY - | UHH_SYSCONFIG_ENAWAKEUP_ENABLE - | UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN); - MmioWrite32 (UHH_HOSTCONFIG, UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT - | UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT - | UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT - | UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE - | UHH_HOSTCONFIG_ENA_INCR16_ENABLE - | UHH_HOSTCONFIG_ENA_INCR8_ENABLE - | UHH_HOSTCONFIG_ENA_INCR4_ENABLE - | UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON - | UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE); - - // USB reset (GPIO 147 - Port 5 pin 19) output high - MmioAnd32 (GPIO5_BASE + GPIO_OE, ~BIT19); - MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19); - - // Get the Power IC protocol - Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); - ASSERT_EFI_ERROR (Status); - - // Power the USB PHY - Data = VAUX_DEV_GRP_P1; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEV_GRP), 1, &Data); - ASSERT_EFI_ERROR(Status); - - Data = VAUX_DEDICATED_18V; - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEDICATED), 1, &Data); - ASSERT_EFI_ERROR (Status); - - // Enable power to the USB hub - Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data); - ASSERT_EFI_ERROR (Status); - - // LEDAON controls the power to the USB host, PWM is disabled - Data &= ~LEDAPWM; - Data |= LEDAON; - - Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data); - ASSERT_EFI_ERROR (Status); -} - - -EFI_STATUS -PciIoPollMem ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_STATUS -PciIoPollIo ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_STATUS -PciIoMemRead ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(This); - - return PciRootBridgeIoMemRead (&Private->RootBridge.Io, - (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, - Private->ConfigSpace->Device.Bar[BarIndex] + Offset, - Count, - Buffer - ); -} - -EFI_STATUS -PciIoMemWrite ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(This); - - return PciRootBridgeIoMemWrite (&Private->RootBridge.Io, - (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, - Private->ConfigSpace->Device.Bar[BarIndex] + Offset, - Count, - Buffer - ); -} - -EFI_STATUS -PciIoIoRead ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_STATUS -PciIoIoWrite ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 BarIndex, - IN UINT64 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -/** - Enable a PCI driver to read PCI controller registers in PCI configuration space. - - @param[in] This A pointer to the EFI_PCI_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] Offset The offset within the PCI configuration space for - the PCI controller. - @param[in] Count The number of PCI configuration operations to - perform. Bytes moved is Width size * Count, - starting at Offset. - - @param[in out] Buffer The destination buffer to store the results. - - @retval EFI_SUCCESS The data was read from the PCI controller. - @retval EFI_INVALID_PARAMETER "Width" is invalid. - @retval EFI_INVALID_PARAMETER "Buffer" is NULL. - -**/ -EFI_STATUS -PciIoPciRead ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT32 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This); - EFI_STATUS Status; - - if ((Width < 0) || (Width >= EfiPciIoWidthMaximum) || (Buffer == NULL)) { - return EFI_INVALID_PARAMETER; - } - - Status = PciRootBridgeIoMemRW ( - (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH)Width, - Count, - TRUE, - (PTR)(UINTN)Buffer, - TRUE, - (PTR)(UINTN)(((UINT8 *)Private->ConfigSpace) + Offset) //Fix me ConfigSpace - ); - - return Status; -} - -/** - Enable a PCI driver to write PCI controller registers in PCI configuration space. - - @param[in] This A pointer to the EFI_PCI_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] Offset The offset within the PCI configuration space for - the PCI controller. - @param[in] Count The number of PCI configuration operations to - perform. Bytes moved is Width size * Count, - starting at Offset. - - @param[in out] Buffer The source buffer to write data from. - - @retval EFI_SUCCESS The data was read from the PCI controller. - @retval EFI_INVALID_PARAMETER "Width" is invalid. - @retval EFI_INVALID_PARAMETER "Buffer" is NULL. - -**/ -EFI_STATUS -PciIoPciWrite ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT32 Offset, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This); - - if ((Width < 0) || (Width >= EfiPciIoWidthMaximum) || (Buffer == NULL)) { - return EFI_INVALID_PARAMETER; - } - - return PciRootBridgeIoMemRW ((EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, - Count, - TRUE, - (PTR)(UINTN)(((UINT8 *)Private->ConfigSpace) + Offset), - TRUE, - (PTR)(UINTN)Buffer - ); -} - -EFI_STATUS -PciIoCopyMem ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_WIDTH Width, - IN UINT8 DestBarIndex, - IN UINT64 DestOffset, - IN UINT8 SrcBarIndex, - IN UINT64 SrcOffset, - IN UINTN Count - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_STATUS -PciIoMap ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ) -{ - DMA_MAP_OPERATION DmaOperation; - - if (Operation == EfiPciIoOperationBusMasterRead) { - DmaOperation = MapOperationBusMasterRead; - } else if (Operation == EfiPciIoOperationBusMasterWrite) { - DmaOperation = MapOperationBusMasterWrite; - } else if (Operation == EfiPciIoOperationBusMasterCommonBuffer) { - DmaOperation = MapOperationBusMasterCommonBuffer; - } else { - return EFI_INVALID_PARAMETER; - } - return DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping); -} - -EFI_STATUS -PciIoUnmap ( - IN EFI_PCI_IO_PROTOCOL *This, - IN VOID *Mapping - ) -{ - return DmaUnmap (Mapping); -} - -/** - Allocate pages that are suitable for an EfiPciIoOperationBusMasterCommonBuffer - mapping. - - @param[in] This A pointer to the EFI_PCI_IO_PROTOCOL instance. - @param[in] Type This parameter is not used and must be ignored. - @param[in] MemoryType The type of memory to allocate, EfiBootServicesData or - EfiRuntimeServicesData. - @param[in] Pages The number of pages to allocate. - @param[out] HostAddress A pointer to store the base system memory address of - the allocated range. - @param[in] Attributes The requested bit mask of attributes for the allocated - range. Only the attributes, - EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE and - EFI_PCI_ATTRIBUTE_MEMORY_CACHED may be used with this - function. If any other bits are set, then EFI_UNSUPPORTED - is returned. This function ignores this bit mask. - - @retval EFI_SUCCESS The requested memory pages were allocated. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - @retval EFI_UNSUPPORTED Attributes is unsupported. - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. - -**/ -EFI_STATUS -PciIoAllocateBuffer ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ) -{ - if (Attributes & - (~(EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE | - EFI_PCI_ATTRIBUTE_MEMORY_CACHED ))) { - return EFI_UNSUPPORTED; - } - - return DmaAllocateBuffer (MemoryType, Pages, HostAddress); -} - - -EFI_STATUS -PciIoFreeBuffer ( - IN EFI_PCI_IO_PROTOCOL *This, - IN UINTN Pages, - IN VOID *HostAddress - ) -{ - return DmaFreeBuffer (Pages, HostAddress); -} - - -EFI_STATUS -PciIoFlush ( - IN EFI_PCI_IO_PROTOCOL *This - ) -{ - return EFI_SUCCESS; -} - -/** - Retrieves this PCI controller's current PCI bus number, device number, and function number. - - @param[in] This A pointer to the EFI_PCI_IO_PROTOCOL instance. - @param[out] SegmentNumber The PCI controller's current PCI segment number. - @param[out] BusNumber The PCI controller's current PCI bus number. - @param[out] DeviceNumber The PCI controller's current PCI device number. - @param[out] FunctionNumber The PCI controller’s current PCI function number. - - @retval EFI_SUCCESS The PCI controller location was returned. - @retval EFI_INVALID_PARAMETER At least one out of the four output parameters is - a NULL pointer. -**/ -EFI_STATUS -PciIoGetLocation ( - IN EFI_PCI_IO_PROTOCOL *This, - OUT UINTN *SegmentNumber, - OUT UINTN *BusNumber, - OUT UINTN *DeviceNumber, - OUT UINTN *FunctionNumber - ) -{ - EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This); - - if ((SegmentNumber == NULL) || (BusNumber == NULL) || - (DeviceNumber == NULL) || (FunctionNumber == NULL) ) { - return EFI_INVALID_PARAMETER; - } - - *SegmentNumber = Private->Segment; - *BusNumber = 0xff; - *DeviceNumber = 0; - *FunctionNumber = 0; - - return EFI_SUCCESS; -} - -/** - Performs an operation on the attributes that this PCI controller supports. - - The operations include getting the set of supported attributes, retrieving - the current attributes, setting the current attributes, enabling attributes, - and disabling attributes. - - @param[in] This A pointer to the EFI_PCI_IO_PROTOCOL instance. - @param[in] Operation The operation to perform on the attributes for this - PCI controller. - @param[in] Attributes The mask of attributes that are used for Set, - Enable and Disable operations. - @param[out] Result A pointer to the result mask of attributes that are - returned for the Get and Supported operations. This - is an optional parameter that may be NULL for the - Set, Enable, and Disable operations. - - @retval EFI_SUCCESS The operation on the PCI controller's - attributes was completed. If the operation - was Get or Supported, then the attribute mask - is returned in Result. - @retval EFI_INVALID_PARAMETER Operation is greater than or equal to - EfiPciIoAttributeOperationMaximum. - @retval EFI_INVALID_PARAMETER Operation is Get and Result is NULL. - @retval EFI_INVALID_PARAMETER Operation is Supported and Result is NULL. - -**/ -EFI_STATUS -PciIoAttributes ( - IN EFI_PCI_IO_PROTOCOL *This, - IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, - IN UINT64 Attributes, - OUT UINT64 *Result OPTIONAL - ) -{ - switch (Operation) { - case EfiPciIoAttributeOperationGet: - case EfiPciIoAttributeOperationSupported: - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - // - // We are not a real PCI device so just say things we kind of do - // - *Result = EFI_PCI_DEVICE_ENABLE; - break; - - case EfiPciIoAttributeOperationSet: - case EfiPciIoAttributeOperationEnable: - case EfiPciIoAttributeOperationDisable: - if (Attributes & (~EFI_PCI_DEVICE_ENABLE)) { - return EFI_UNSUPPORTED; - } - // Since we are not a real PCI device no enable/set or disable operations exist. - return EFI_SUCCESS; - - default: - return EFI_INVALID_PARAMETER; - }; - return EFI_SUCCESS; -} - -EFI_STATUS -PciIoGetBarAttributes ( - IN EFI_PCI_IO_PROTOCOL *This, - IN UINT8 BarIndex, - OUT UINT64 *Supports, OPTIONAL - OUT VOID **Resources OPTIONAL - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_STATUS -PciIoSetBarAttributes ( - IN EFI_PCI_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN UINT8 BarIndex, - IN OUT UINT64 *Offset, - IN OUT UINT64 *Length - ) -{ - ASSERT (FALSE); - return EFI_UNSUPPORTED; -} - -EFI_PCI_IO_PROTOCOL PciIoTemplate = -{ - PciIoPollMem, - PciIoPollIo, - { PciIoMemRead, PciIoMemWrite }, - { PciIoIoRead, PciIoIoWrite }, - { PciIoPciRead, PciIoPciWrite }, - PciIoCopyMem, - PciIoMap, - PciIoUnmap, - PciIoAllocateBuffer, - PciIoFreeBuffer, - PciIoFlush, - PciIoGetLocation, - PciIoAttributes, - PciIoGetBarAttributes, - PciIoSetBarAttributes, - 0, - 0 -}; - -EFI_STATUS -EFIAPI -PciEmulationEntryPoint ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - EFI_HANDLE Handle; - EFI_PCI_IO_PRIVATE_DATA *Private; - UINT8 CapabilityLength; - UINT8 PhysicalPorts; - UINTN Count; - - - //Configure USB host for OMAP3530. - ConfigureUSBHost(); - - // Create a private structure - Private = AllocatePool(sizeof(EFI_PCI_IO_PRIVATE_DATA)); - if (Private == NULL) { - Status = EFI_OUT_OF_RESOURCES; - return Status; - } - - Private->Signature = EFI_PCI_IO_PRIVATE_DATA_SIGNATURE; // Fill in signature - Private->RootBridge.Signature = PCI_ROOT_BRIDGE_SIGNATURE; // Fake Root Bridge structure needs a signature too - Private->RootBridge.MemoryStart = USB_EHCI_HCCAPBASE; // Get the USB capability register base - Private->Segment = 0; // Default to segment zero - - // Find out the capability register length and number of physical ports. - CapabilityLength = MmioRead8(Private->RootBridge.MemoryStart); - PhysicalPorts = (MmioRead32 (Private->RootBridge.MemoryStart + 0x4)) & 0x0000000F; - - // Calculate the total size of the USB registers. - Private->RootBridge.MemorySize = CapabilityLength + (HOST_CONTROLLER_OPERATION_REG_SIZE + ((4 * PhysicalPorts) - 1)); - - // Enable Port Power bit in Port status and control registers in EHCI register space. - // Port Power Control (PPC) bit in the HCSPARAMS register is already set which indicates - // host controller implementation includes port power control. - for (Count = 0; Count < PhysicalPorts; Count++) { - MmioOr32 ((Private->RootBridge.MemoryStart + CapabilityLength + HOST_CONTROLLER_OPERATION_REG_SIZE + 4*Count), 0x00001000); - } - - // Create fake PCI config space. - Private->ConfigSpace = AllocateZeroPool(sizeof(PCI_TYPE00)); - if (Private->ConfigSpace == NULL) { - Status = EFI_OUT_OF_RESOURCES; - FreePool(Private); - return Status; - } - - // Configure PCI config space - Private->ConfigSpace->Hdr.VendorId = 0xFFFF; // Invalid vendor Id as it is not an actual device. - Private->ConfigSpace->Hdr.DeviceId = 0x0000; // Not relevant as the vendor id is not valid. - Private->ConfigSpace->Hdr.ClassCode[0] = 0x20; - Private->ConfigSpace->Hdr.ClassCode[1] = 0x03; - Private->ConfigSpace->Hdr.ClassCode[2] = 0x0C; - Private->ConfigSpace->Device.Bar[0] = Private->RootBridge.MemoryStart; - - Handle = NULL; - - // Unique device path. - CopyMem(&Private->DevicePath, &PciIoDevicePathTemplate, sizeof(PciIoDevicePathTemplate)); - Private->DevicePath.AcpiDevicePath.UID = 0; - - // Copy protocol structure - CopyMem(&Private->PciIoProtocol, &PciIoTemplate, sizeof(PciIoTemplate)); - - Status = gBS->InstallMultipleProtocolInterfaces(&Handle, - &gEfiPciIoProtocolGuid, &Private->PciIoProtocol, - &gEfiDevicePathProtocolGuid, &Private->DevicePath, - NULL); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "PciEmulationEntryPoint InstallMultipleProtocolInterfaces() failed.\n")); - } - - return Status; -} - diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h deleted file mode 100644 index d5ee04318939..000000000000 --- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h +++ /dev/null @@ -1,292 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _PCI_ROOT_BRIDGE_H_ -#define _PCI_ROOT_BRIDGE_H_ - -#include - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include - -#include - - - -#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL -#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL -#define EFI_RESOURCE_SATISFIED 0x0000000000000000ULL - - -typedef struct { - ACPI_HID_DEVICE_PATH AcpiDevicePath; - EFI_DEVICE_PATH_PROTOCOL EndDevicePath; -} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; - - -#define ACPI_CONFIG_IO 0 -#define ACPI_CONFIG_MMIO 1 -#define ACPI_CONFIG_BUS 2 - -typedef struct { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR Desc[3]; - EFI_ACPI_END_TAG_DESCRIPTOR EndDesc; -} ACPI_CONFIG_INFO; - - -#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32 ('P', 'c', 'i', 'F') - -typedef struct { - UINT32 Signature; - EFI_HANDLE Handle; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io; - EFI_PCI_ROOT_BRIDGE_DEVICE_PATH DevicePath; - - UINT8 StartBus; - UINT8 EndBus; - UINT16 Type; - UINT32 MemoryStart; - UINT32 MemorySize; - UINTN IoOffset; - UINT32 IoStart; - UINT32 IoSize; - UINT64 PciAttributes; - - ACPI_CONFIG_INFO *Config; - -} PCI_ROOT_BRIDGE; - - -#define INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) CR (a, PCI_ROOT_BRIDGE, Io, PCI_ROOT_BRIDGE_SIGNATURE) - - -typedef union { - UINT8 volatile *buf; - UINT8 volatile *ui8; - UINT16 volatile *ui16; - UINT32 volatile *ui32; - UINT64 volatile *ui64; - UINTN volatile ui; -} PTR; - - - -EFI_STATUS -EFIAPI -PciRootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN OUT VOID *UserBuffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN OUT VOID *UserBuffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ); - -EFI_STATUS -EFIAPI -PciRootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ); - -// -// Private Function Prototypes -// -EFI_STATUS -EFIAPI -PciRootBridgeIoMemRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINTN Count, - IN BOOLEAN InStrideFlag, - IN PTR In, - IN BOOLEAN OutStrideFlag, - OUT PTR Out - ); - -BOOLEAN -PciIoMemAddressValid ( - IN EFI_PCI_IO_PROTOCOL *This, - IN UINT64 Address - ); - -EFI_STATUS -EmulatePciIoForEhci ( - INTN MvPciIfMaxIf - ); - -#endif - diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf deleted file mode 100644 index 02e09c334d28..000000000000 --- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf +++ /dev/null @@ -1,56 +0,0 @@ -/** @file - - Copyright (c) 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardPciEmulation - FILE_GUID = feaa2e2b-53ac-4d5e-ae10-1efd5da4a2ba - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = PciEmulationEntryPoint - -[Sources.common] - PciRootBridgeIo.c - PciEmulation.c - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - IntelFrameworkPkg/IntelFrameworkPkg.dec - ArmPkg/ArmPkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - BaseLib - DxeServicesTableLib - UefiLib - UefiBootServicesTableLib - UefiDriverEntryPoint - UefiRuntimeServicesTableLib - IoLib - OmapDmaLib - DmaLib - -[Protocols] - gEfiPciRootBridgeIoProtocolGuid - gEfiDevicePathProtocolGuid - gEfiPciHostBridgeResourceAllocationProtocolGuid - gEfiPciIoProtocolGuid - gEmbeddedExternalDeviceProtocolGuid - -[Depex] - gEfiMetronomeArchProtocolGuid AND - gEmbeddedExternalDeviceProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c deleted file mode 100644 index e8635ed88d91..000000000000 --- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c +++ /dev/null @@ -1,306 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "PciEmulation.h" - -BOOLEAN -PciRootBridgeMemAddressValid ( - IN PCI_ROOT_BRIDGE *Private, - IN UINT64 Address - ) -{ - if ((Address >= Private->MemoryStart) && (Address < (Private->MemoryStart + Private->MemorySize))) { - return TRUE; - } - - return FALSE; -} - - -EFI_STATUS -PciRootBridgeIoMemRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINTN Count, - IN BOOLEAN InStrideFlag, - IN PTR In, - IN BOOLEAN OutStrideFlag, - OUT PTR Out - ) -{ - UINTN Stride; - UINTN InStride; - UINTN OutStride; - - - Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - Stride = (UINTN)1 << Width; - InStride = InStrideFlag ? Stride : 0; - OutStride = OutStrideFlag ? Stride : 0; - - // - // Loop for each iteration and move the data - // - switch (Width) { - case EfiPciWidthUint8: - for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) { - *In.ui8 = *Out.ui8; - } - break; - case EfiPciWidthUint16: - for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) { - *In.ui16 = *Out.ui16; - } - break; - case EfiPciWidthUint32: - for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) { - *In.ui32 = *Out.ui32; - } - break; - default: - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} - -EFI_STATUS -PciRootBridgeIoPciRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN OUT VOID *UserBuffer - ) -{ - return EFI_SUCCESS; -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Width Signifies the width of the memory operations. - @param Address The base address of the memory operations. - @param Count The number of memory operations to perform. - @param Buffer For read operations, the destination buffer to store the results. For write - operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - @retval EFI_INVALID_PARAMETER One or more parameters are invalid. - -**/ -EFI_STATUS -EFIAPI -PciRootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - PCI_ROOT_BRIDGE *Private; - UINTN AlignMask; - PTR In; - PTR Out; - - if ( Buffer == NULL ) { - return EFI_INVALID_PARAMETER; - } - - Private = INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - if (!PciRootBridgeMemAddressValid (Private, Address)) { - return EFI_INVALID_PARAMETER; - } - - AlignMask = (1 << (Width & 0x03)) - 1; - if (Address & AlignMask) { - return EFI_INVALID_PARAMETER; - } - - In.buf = Buffer; - Out.buf = (VOID *)(UINTN) Address; - - switch (Width) { - case EfiPciWidthUint8: - case EfiPciWidthUint16: - case EfiPciWidthUint32: - case EfiPciWidthUint64: - return PciRootBridgeIoMemRW (Width, Count, TRUE, In, TRUE, Out); - - case EfiPciWidthFifoUint8: - case EfiPciWidthFifoUint16: - case EfiPciWidthFifoUint32: - case EfiPciWidthFifoUint64: - return PciRootBridgeIoMemRW (Width, Count, TRUE, In, FALSE, Out); - - case EfiPciWidthFillUint8: - case EfiPciWidthFillUint16: - case EfiPciWidthFillUint32: - case EfiPciWidthFillUint64: - return PciRootBridgeIoMemRW (Width, Count, FALSE, In, TRUE, Out); - - default: - break; - } - - return EFI_INVALID_PARAMETER; -} - - - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Width Signifies the width of the memory operations. - @param Address The base address of the memory operations. - @param Count The number of memory operations to perform. - @param Buffer For read operations, the destination buffer to store the results. For write - operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - @retval EFI_INVALID_PARAMETER One or more parameters are invalid. - -**/ -EFI_STATUS -EFIAPI -PciRootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - PCI_ROOT_BRIDGE *Private; - UINTN AlignMask; - PTR In; - PTR Out; - - if ( Buffer == NULL ) { - return EFI_INVALID_PARAMETER; - } - - Private = INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - if (!PciRootBridgeMemAddressValid (Private, Address)) { - return EFI_INVALID_PARAMETER; - } - - AlignMask = (1 << (Width & 0x03)) - 1; - if (Address & AlignMask) { - return EFI_INVALID_PARAMETER; - } - - In.buf = (VOID *)(UINTN) Address; - Out.buf = Buffer; - - switch (Width) { - case EfiPciWidthUint8: - case EfiPciWidthUint16: - case EfiPciWidthUint32: - case EfiPciWidthUint64: - return PciRootBridgeIoMemRW (Width, Count, TRUE, In, TRUE, Out); - - case EfiPciWidthFifoUint8: - case EfiPciWidthFifoUint16: - case EfiPciWidthFifoUint32: - case EfiPciWidthFifoUint64: - return PciRootBridgeIoMemRW (Width, Count, FALSE, In, TRUE, Out); - - case EfiPciWidthFillUint8: - case EfiPciWidthFillUint16: - case EfiPciWidthFillUint32: - case EfiPciWidthFillUint64: - return PciRootBridgeIoMemRW (Width, Count, TRUE, In, FALSE, Out); - - default: - break; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Width Signifies the width of the memory operations. - @param Address The base address of the memory operations. - @param Count The number of memory operations to perform. - @param Buffer For read operations, the destination buffer to store the results. For write - operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - @retval EFI_INVALID_PARAMETER One or more parameters are invalid. - -**/ -EFI_STATUS -EFIAPI -PciRootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - return PciRootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer); -} - - - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Width Signifies the width of the memory operations. - @param Address The base address of the memory operations. - @param Count The number of memory operations to perform. - @param Buffer For read operations, the destination buffer to store the results. For write - operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - @retval EFI_INVALID_PARAMETER One or more parameters are invalid. - -**/ -EFI_STATUS -EFIAPI -PciRootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - return PciRootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer); -} - - diff --git a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c b/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c deleted file mode 100644 index f2f43e252fdd..000000000000 --- a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c +++ /dev/null @@ -1,325 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include - -#include -#include -#include - -#include - -#define MAX_RETRY 1000 - -// -// Internal Functions -// -STATIC -EFI_STATUS -WaitForBusBusy ( - VOID - ) -{ - UINTN Retry = 0; - - while (++Retry < MAX_RETRY && (MmioRead16(I2C_STAT) & BB) == 0x1); - - if (Retry == MAX_RETRY) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -PollForStatus( - UINT16 StatusBit - ) -{ - UINTN Retry = 0; - - while(Retry < MAX_RETRY) { - if (MmioRead16(I2C_STAT) & StatusBit) { - //Clear particular status bit from Status register. - MmioOr16(I2C_STAT, StatusBit); - break; - } - Retry++; - } - - if (Retry == MAX_RETRY) { - return EFI_TIMEOUT; - } - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -ConfigureI2c ( - VOID - ) -{ - //Program prescaler to obtain 12-MHz clock - MmioWrite16(I2C_PSC, 0x0000); - - //Program SCLL and SCLH - //NOTE: Following values are the register dump after U-Boot code executed. - //We need to figure out how its calculated based on the I2C functional clock and I2C_PSC. - MmioWrite16(I2C_SCLL, 0x0035); - MmioWrite16(I2C_SCLH, 0x0035); - - //Take the I2C controller out of reset. - MmioOr16(I2C_CON, I2C_EN); - - //Initialize the I2C controller. - - //Set I2C controller in Master mode. - MmioOr16(I2C_CON, MST); - - //Enable interrupts for receive/transmit mode. - MmioOr16(I2C_IE, (XRDY_IE | RRDY_IE | ARDY_IE | NACK_IE)); - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -I2CReadOneByte ( - UINT8 *Data - ) -{ - EFI_STATUS Status; - - //I2C bus status checking - Status = WaitForBusBusy(); - if (EFI_ERROR(Status)) { - return Status; - } - - //Poll till Receive ready bit is set. - Status = PollForStatus(RRDY); - if (EFI_ERROR(Status)) { - return Status; - } - - *Data = MmioRead8(I2C_DATA); - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -I2CWriteOneByte ( - UINT8 Data - ) -{ - EFI_STATUS Status; - - //I2C bus status checking - Status = WaitForBusBusy(); - if (EFI_ERROR(Status)) { - return Status; - } - - //Data transfer - //Poll till Transmit ready bit is set - Status = PollForStatus(XRDY); - if (EFI_ERROR(Status)) { - return Status; - } - - MmioWrite8(I2C_DATA, Data); - - //Wait and check if the NACK is not set. - gBS->Stall(1000); - if (MmioRead16(I2C_STAT) & NACK) { - return EFI_DEVICE_ERROR; - } - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -SmbusBlockRead ( - OUT UINT8 *Buffer, - IN UINTN Length - ) -{ - UINTN Index = 0; - EFI_STATUS Status = EFI_SUCCESS; - - //Transfer configuration for receiving data. - MmioWrite16(I2C_CNT, Length); - //Need stop bit before sending data. - MmioWrite16(I2C_CON, (I2C_EN | MST | STP | STT)); - - while (Index < Length) { - //Read a byte - Status = I2CReadOneByte(&Buffer[Index++]); - if (EFI_ERROR(Status)) { - return Status; - } - } - - //Transfer completion - Status = PollForStatus(ARDY); - if (EFI_ERROR(Status)) { - return Status; - } - - return Status; -} - -STATIC -EFI_STATUS -SmbusBlockWrite ( - IN UINT8 *Buffer, - IN UINTN Length - ) -{ - UINTN Index = 0; - EFI_STATUS Status = EFI_SUCCESS; - - //Transfer configuration for transmitting data - MmioWrite16(I2C_CNT, Length); - MmioWrite16(I2C_CON, (I2C_EN | TRX | MST | STT | STP)); - - while (Index < Length) { - //Send a byte - Status = I2CWriteOneByte(Buffer[Index++]); - if (EFI_ERROR(Status)) { - return Status; - } - } - - //Transfer completion - Status = PollForStatus(ARDY); - if (EFI_ERROR(Status)) { - return Status; - } - - return Status; -} - -// -// Public Functions. -// -EFI_STATUS -EFIAPI -SmbusExecute ( - IN CONST EFI_SMBUS_HC_PROTOCOL *This, - IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress, - IN CONST EFI_SMBUS_DEVICE_COMMAND Command, - IN CONST EFI_SMBUS_OPERATION Operation, - IN CONST BOOLEAN PecCheck, - IN OUT UINTN *Length, - IN OUT VOID *Buffer - ) -{ - UINT8 *ByteBuffer = Buffer; - EFI_STATUS Status = EFI_SUCCESS; - UINT8 SlaveAddr = (UINT8)(SlaveAddress.SmbusDeviceAddress); - - if (PecCheck) { - return EFI_UNSUPPORTED; - } - - if ((Operation != EfiSmbusWriteBlock) && (Operation != EfiSmbusReadBlock)) { - return EFI_UNSUPPORTED; - } - - //Set the Slave address. - MmioWrite16(I2C_SA, SlaveAddr); - - if (Operation == EfiSmbusReadBlock) { - Status = SmbusBlockRead(ByteBuffer, *Length); - } else if (Operation == EfiSmbusWriteBlock) { - Status = SmbusBlockWrite(ByteBuffer, *Length); - } - - return Status; -} - -EFI_STATUS -EFIAPI -SmbusArpDevice ( - IN CONST EFI_SMBUS_HC_PROTOCOL *This, - IN BOOLEAN ArpAll, - IN EFI_SMBUS_UDID *SmbusUdid OPTIONAL, - IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL - ) -{ - return EFI_UNSUPPORTED; -} - - -EFI_STATUS -EFIAPI -SmbusGetArpMap ( - IN CONST EFI_SMBUS_HC_PROTOCOL *This, - IN OUT UINTN *Length, - IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap - ) -{ - return EFI_UNSUPPORTED; -} - - -EFI_STATUS -EFIAPI -SmbusNotify ( - IN CONST EFI_SMBUS_HC_PROTOCOL *This, - IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress, - IN CONST UINTN Data, - IN CONST EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction - ) -{ - return EFI_UNSUPPORTED; -} - -EFI_SMBUS_HC_PROTOCOL SmbusProtocol = -{ - SmbusExecute, - SmbusArpDevice, - SmbusGetArpMap, - SmbusNotify -}; - -EFI_STATUS -InitializeSmbus ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_HANDLE Handle = NULL; - EFI_STATUS Status; - - //Configure I2C controller. - Status = ConfigureI2c(); - if (EFI_ERROR(Status)) { - DEBUG ((EFI_D_ERROR, "InitializeI2c fails.\n")); - return Status; - } - - // Install the SMBUS interface - Status = gBS->InstallMultipleProtocolInterfaces(&Handle, &gEfiSmbusHcProtocolGuid, &SmbusProtocol, NULL); - ASSERT_EFI_ERROR(Status); - - return Status; -} - diff --git a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf b/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf deleted file mode 100644 index a92474f41f20..000000000000 --- a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf +++ /dev/null @@ -1,45 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = Smbus - FILE_GUID = d5125e0f-1226-444f-a218-0085996ed5da - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = InitializeSmbus - -[Sources.common] - Smbus.c - -[Packages] - MdePkg/MdePkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - PcdLib - UefiLib - UefiDriverEntryPoint - MemoryAllocationLib - IoLib - -[Guids] - -[Protocols] - gEfiSmbusHcProtocolGuid - -[Pcd] - -[depex] - TRUE diff --git a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c b/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c deleted file mode 100644 index 66f9d853ff11..000000000000 --- a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c +++ /dev/null @@ -1,116 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include - -#include - -#include -#include -#include -#include - -#include -#include - -EFI_SMBUS_HC_PROTOCOL *Smbus; - -EFI_STATUS -Read ( - IN EMBEDDED_EXTERNAL_DEVICE *This, - IN UINTN Register, - IN UINTN Length, - OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - EFI_SMBUS_DEVICE_ADDRESS SlaveAddress; - UINT8 DeviceRegister; - UINTN DeviceRegisterLength = 1; - - SlaveAddress.SmbusDeviceAddress = EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(Register); - DeviceRegister = (UINT8)EXTERNAL_DEVICE_REGISTER_TO_REGISTER(Register); - - //Write DeviceRegister. - Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusWriteBlock, FALSE, &DeviceRegisterLength, &DeviceRegister); - if (EFI_ERROR(Status)) { - return Status; - } - - //Read Data - Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusReadBlock, FALSE, &Length, Buffer); - return Status; -} - -EFI_STATUS -Write ( - IN EMBEDDED_EXTERNAL_DEVICE *This, - IN UINTN Register, - IN UINTN Length, - IN VOID *Buffer - ) -{ - EFI_STATUS Status; - EFI_SMBUS_DEVICE_ADDRESS SlaveAddress; - UINT8 DeviceRegister; - UINTN DeviceBufferLength = Length + 1; - UINT8 *DeviceBuffer; - - SlaveAddress.SmbusDeviceAddress = EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(Register); - DeviceRegister = (UINT8)EXTERNAL_DEVICE_REGISTER_TO_REGISTER(Register); - - //Prepare buffer for writing - DeviceBuffer = (UINT8 *)AllocatePool(DeviceBufferLength); - if (DeviceBuffer == NULL) { - Status = EFI_OUT_OF_RESOURCES; - goto exit; - } - - //Set Device register followed by data to write. - DeviceBuffer[0] = DeviceRegister; - CopyMem(&DeviceBuffer[1], Buffer, Length); - - //Write Data - Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusWriteBlock, FALSE, &DeviceBufferLength, DeviceBuffer); - if (EFI_ERROR(Status)) { - goto exit; - } - -exit: - if (DeviceBuffer) { - FreePool(DeviceBuffer); - } - - return Status; -} - -EMBEDDED_EXTERNAL_DEVICE ExternalDevice = { - Read, - Write -}; - -EFI_STATUS -TPS65950Initialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - Status = gBS->LocateProtocol(&gEfiSmbusHcProtocolGuid, NULL, (VOID **)&Smbus); - ASSERT_EFI_ERROR(Status); - - Status = gBS->InstallMultipleProtocolInterfaces(&ImageHandle, &gEmbeddedExternalDeviceProtocolGuid, &ExternalDevice, NULL); - return Status; -} diff --git a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf b/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf deleted file mode 100644 index bd851551042d..000000000000 --- a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf +++ /dev/null @@ -1,48 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = TPS65950 - FILE_GUID = 71fe861a-5450-48b6-bfb0-b93522616f99 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = TPS65950Initialize - - -[Sources.common] - TPS65950.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - BaseMemoryLib - PcdLib - UefiLib - UefiDriverEntryPoint - MemoryAllocationLib - -[Guids] - -[Protocols] - gEfiSmbusHcProtocolGuid - gEmbeddedExternalDeviceProtocolGuid - -[Pcd] - -[depex] - gEfiSmbusHcProtocolGuid diff --git a/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c b/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c deleted file mode 100644 index 8b56d457e413..000000000000 --- a/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c +++ /dev/null @@ -1,376 +0,0 @@ -/** @file - Template for Timer Architecture Protocol driver of the ARM flavor - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - - -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - - -// The notification function to call on every timer interrupt. -volatile EFI_TIMER_NOTIFY mTimerNotifyFunction = (EFI_TIMER_NOTIFY)NULL; - - -// The current period of the timer interrupt -volatile UINT64 mTimerPeriod = 0; - -// Cached copy of the Hardware Interrupt protocol instance -EFI_HARDWARE_INTERRUPT_PROTOCOL *gInterrupt = NULL; - -// Cached registers -volatile UINT32 TISR; -volatile UINT32 TCLR; -volatile UINT32 TLDR; -volatile UINT32 TCRR; -volatile UINT32 TIER; - -// Cached interrupt vector -volatile UINTN gVector; - - -/** - - C Interrupt Handler calledin the interrupt context when Source interrupt is active. - - - @param Source Source of the interrupt. Hardware routing off a specific platform defines - what source means. - - @param SystemContext Pointer to system register context. Mostly used by debuggers and will - update the system context after the return from the interrupt if - modified. Don't change these values unless you know what you are doing - -**/ -VOID -EFIAPI -TimerInterruptHandler ( - IN HARDWARE_INTERRUPT_SOURCE Source, - IN EFI_SYSTEM_CONTEXT SystemContext - ) -{ - EFI_TPL OriginalTPL; - - - - // - // DXE core uses this callback for the EFI timer tick. The DXE core uses locks - // that raise to TPL_HIGH and then restore back to current level. Thus we need - // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick. - // - OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL); - - if (mTimerNotifyFunction) { - mTimerNotifyFunction(mTimerPeriod); - } - - // Clear all timer interrupts - MmioWrite32 (TISR, TISR_CLEAR_ALL); - - // Poll interrupt status bits to ensure clearing - while ((MmioRead32 (TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING); - - gBS->RestoreTPL (OriginalTPL); -} - -/** - This function registers the handler NotifyFunction so it is called every time - the timer interrupt fires. It also passes the amount of time since the last - handler call to the NotifyFunction. If NotifyFunction is NULL, then the - handler is unregistered. If the handler is registered, then EFI_SUCCESS is - returned. If the CPU does not support registering a timer interrupt handler, - then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler - when a handler is already registered, then EFI_ALREADY_STARTED is returned. - If an attempt is made to unregister a handler when a handler is not registered, - then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to - register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR - is returned. - - @param This The EFI_TIMER_ARCH_PROTOCOL instance. - @param NotifyFunction The function to call when a timer interrupt fires. This - function executes at TPL_HIGH_LEVEL. The DXE Core will - register a handler for the timer interrupt, so it can know - how much time has passed. This information is used to - signal timer based events. NULL will unregister the handler. - @retval EFI_SUCCESS The timer handler was registered. - @retval EFI_UNSUPPORTED The platform does not support timer interrupts. - @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already - registered. - @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not - previously registered. - @retval EFI_DEVICE_ERROR The timer handler could not be registered. - -**/ -EFI_STATUS -EFIAPI -TimerDriverRegisterHandler ( - IN EFI_TIMER_ARCH_PROTOCOL *This, - IN EFI_TIMER_NOTIFY NotifyFunction - ) -{ - if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) { - return EFI_INVALID_PARAMETER; - } - - if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) { - return EFI_ALREADY_STARTED; - } - - mTimerNotifyFunction = NotifyFunction; - - return EFI_SUCCESS; -} - -/** - - This function adjusts the period of timer interrupts to the value specified - by TimerPeriod. If the timer period is updated, then the selected timer - period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If - the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. - If an error occurs while attempting to update the timer period, then the - timer hardware will be put back in its state prior to this call, and - EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt - is disabled. This is not the same as disabling the CPU's interrupts. - Instead, it must either turn off the timer hardware, or it must adjust the - interrupt controller so that a CPU interrupt is not generated when the timer - interrupt fires. - - @param This The EFI_TIMER_ARCH_PROTOCOL instance. - @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If - the timer hardware is not programmable, then EFI_UNSUPPORTED is - returned. If the timer is programmable, then the timer period - will be rounded up to the nearest timer period that is supported - by the timer hardware. If TimerPeriod is set to 0, then the - timer interrupts will be disabled. - - - @retval EFI_SUCCESS The timer period was changed. - @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt. - @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error. - -**/ -EFI_STATUS -EFIAPI -TimerDriverSetTimerPeriod ( - IN EFI_TIMER_ARCH_PROTOCOL *This, - IN UINT64 TimerPeriod - ) -{ - EFI_STATUS Status; - UINT64 TimerCount; - INT32 LoadValue; - - if (TimerPeriod == 0) { - // Turn off GPTIMER3 - MmioWrite32 (TCLR, TCLR_ST_OFF); - - Status = gInterrupt->DisableInterruptSource(gInterrupt, gVector); - } else { - // Calculate required timer count - TimerCount = DivU64x32(TimerPeriod * 100, PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds)); - - // Set GPTIMER3 Load register - LoadValue = (INT32) -TimerCount; - MmioWrite32 (TLDR, LoadValue); - MmioWrite32 (TCRR, LoadValue); - - // Enable Overflow interrupt - MmioWrite32 (TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE); - - // Turn on GPTIMER3, it will reload at overflow - MmioWrite32 (TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); - - Status = gInterrupt->EnableInterruptSource(gInterrupt, gVector); - } - - // - // Save the new timer period - // - mTimerPeriod = TimerPeriod; - return Status; -} - - -/** - This function retrieves the period of timer interrupts in 100 ns units, - returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod - is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is - returned, then the timer is currently disabled. - - @param This The EFI_TIMER_ARCH_PROTOCOL instance. - @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If - 0 is returned, then the timer is currently disabled. - - - @retval EFI_SUCCESS The timer period was returned in TimerPeriod. - @retval EFI_INVALID_PARAMETER TimerPeriod is NULL. - -**/ -EFI_STATUS -EFIAPI -TimerDriverGetTimerPeriod ( - IN EFI_TIMER_ARCH_PROTOCOL *This, - OUT UINT64 *TimerPeriod - ) -{ - if (TimerPeriod == NULL) { - return EFI_INVALID_PARAMETER; - } - - *TimerPeriod = mTimerPeriod; - return EFI_SUCCESS; -} - -/** - This function generates a soft timer interrupt. If the platform does not support soft - timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned. - If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler() - service, then a soft timer interrupt will be generated. If the timer interrupt is - enabled when this service is called, then the registered handler will be invoked. The - registered handler should not be able to distinguish a hardware-generated timer - interrupt from a software-generated timer interrupt. - - @param This The EFI_TIMER_ARCH_PROTOCOL instance. - - @retval EFI_SUCCESS The soft timer interrupt was generated. - @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts. - -**/ -EFI_STATUS -EFIAPI -TimerDriverGenerateSoftInterrupt ( - IN EFI_TIMER_ARCH_PROTOCOL *This - ) -{ - return EFI_UNSUPPORTED; -} - - -/** - Interface stucture for the Timer Architectural Protocol. - - @par Protocol Description: - This protocol provides the services to initialize a periodic timer - interrupt, and to register a handler that is called each time the timer - interrupt fires. It may also provide a service to adjust the rate of the - periodic timer interrupt. When a timer interrupt occurs, the handler is - passed the amount of time that has passed since the previous timer - interrupt. - - @param RegisterHandler - Registers a handler that will be called each time the - timer interrupt fires. TimerPeriod defines the minimum - time between timer interrupts, so TimerPeriod will also - be the minimum time between calls to the registered - handler. - - @param SetTimerPeriod - Sets the period of the timer interrupt in 100 nS units. - This function is optional, and may return EFI_UNSUPPORTED. - If this function is supported, then the timer period will - be rounded up to the nearest supported timer period. - - - @param GetTimerPeriod - Retrieves the period of the timer interrupt in 100 nS units. - - @param GenerateSoftInterrupt - Generates a soft timer interrupt that simulates the firing of - the timer interrupt. This service can be used to invoke the registered handler if the timer interrupt has been masked for - a period of time. - -**/ -EFI_TIMER_ARCH_PROTOCOL gTimer = { - TimerDriverRegisterHandler, - TimerDriverSetTimerPeriod, - TimerDriverGetTimerPeriod, - TimerDriverGenerateSoftInterrupt -}; - - -/** - Initialize the state information for the Timer Architectural Protocol and - the Timer Debug support protocol that allows the debugger to break into a - running program. - - @param ImageHandle of the loaded driver - @param SystemTable Pointer to the System Table - - @retval EFI_SUCCESS Protocol registered - @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure - @retval EFI_DEVICE_ERROR Hardware problems - -**/ -EFI_STATUS -EFIAPI -TimerInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_HANDLE Handle = NULL; - EFI_STATUS Status; - UINT32 TimerBaseAddress; - - // Find the interrupt controller protocol. ASSERT if not found. - Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL, (VOID **)&gInterrupt); - ASSERT_EFI_ERROR (Status); - - // Set up the timer registers - TimerBaseAddress = TimerBase (FixedPcdGet32(PcdOmap35xxArchTimer)); - TISR = TimerBaseAddress + GPTIMER_TISR; - TCLR = TimerBaseAddress + GPTIMER_TCLR; - TLDR = TimerBaseAddress + GPTIMER_TLDR; - TCRR = TimerBaseAddress + GPTIMER_TCRR; - TIER = TimerBaseAddress + GPTIMER_TIER; - - // Disable the timer - Status = TimerDriverSetTimerPeriod (&gTimer, 0); - ASSERT_EFI_ERROR (Status); - - // Install interrupt handler - gVector = InterruptVectorForTimer (FixedPcdGet32(PcdOmap35xxArchTimer)); - Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler); - ASSERT_EFI_ERROR (Status); - - // Turn on the functional clock for Timer - MmioOr32 (CM_FCLKEN_PER, CM_FCLKEN_PER_EN_GPT3_ENABLE); - - // Set up default timer - Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod)); - ASSERT_EFI_ERROR (Status); - - // Install the Timer Architectural Protocol onto a new handle - Status = gBS->InstallMultipleProtocolInterfaces ( - &Handle, - &gEfiTimerArchProtocolGuid, &gTimer, - NULL - ); - ASSERT_EFI_ERROR(Status); - - return Status; -} - diff --git a/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf b/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf deleted file mode 100644 index 6344a1d28889..000000000000 --- a/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf +++ /dev/null @@ -1,57 +0,0 @@ -#/** @file -# -# Component description file for Timer module -# -# Copyright (c) 2009, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardTimerDxe - FILE_GUID = 6ddbf08b-cfc9-43cc-9e81-0784ba312ca0 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = TimerInitialize - -[Sources.common] - Timer.c - -[Packages] - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - -[LibraryClasses] - BaseLib - UefiRuntimeServicesTableLib - UefiLib - UefiBootServicesTableLib - BaseMemoryLib - DebugLib - UefiDriverEntryPoint - IoLib - OmapLib - -[Guids] - -[Protocols] - gEfiTimerArchProtocolGuid - gHardwareInterruptProtocolGuid - -[Pcd.common] - gEmbeddedTokenSpaceGuid.PcdTimerPeriod - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds - gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer - -[Depex] - gHardwareInterruptProtocolGuid diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf b/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf deleted file mode 100644 index 2b20a09549d5..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf +++ /dev/null @@ -1,65 +0,0 @@ - -#/** @file -# -# Component description file for Bds module -# -# Copyright (c) 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardBds - FILE_GUID = 934431fe-5745-402e-913d-17b4434eb0f3 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = BdsInitialize - -[Sources.common] - BdsEntry.c - FirmwareVolume.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[LibraryClasses] - DevicePathLib - BaseLib - HobLib - UefiRuntimeServicesTableLib - ReportStatusCodeLib - PerformanceLib - DxeServicesTableLib - MemoryAllocationLib - UefiLib - UefiBootServicesTableLib - BaseMemoryLib - DebugLib - PrintLib - UefiDriverEntryPoint - -[Guids] - - -[Protocols] - gEfiBdsArchProtocolGuid - gEfiSimpleTextInProtocolGuid - gEfiSimpleTextOutProtocolGuid - gEfiSerialIoProtocolGuid - gEfiDevicePathProtocolGuid - gEfiSimpleFileSystemProtocolGuid - gEfiUsbIoProtocolGuid - gEfiFirmwareVolume2ProtocolGuid - -[Depex] - TRUE diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c b/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c deleted file mode 100644 index f2f1ae3983a6..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c +++ /dev/null @@ -1,242 +0,0 @@ -/** @file - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements - of the UEFI specification as it is designed to implement an embedded systmes - propriatary boot scheme. - - This template assume a DXE driver produces a SerialIo protocol not using the EFI - driver module and it will attempt to connect a console on top of this. - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "BdsEntry.h" - - -BOOLEAN gConsolePresent = FALSE; - -EFI_BDS_ARCH_PROTOCOL gBdsProtocol = { - BdsEntry, -}; - - - - -/** - This function uses policy data from the platform to determine what operating - system or system utility should be loaded and invoked. This function call - also optionally make the use of user input to determine the operating system - or system utility to be loaded and invoked. When the DXE Core has dispatched - all the drivers on the dispatch queue, this function is called. This - function will attempt to connect the boot devices required to load and invoke - the selected operating system or system utility. During this process, - additional firmware volumes may be discovered that may contain addition DXE - drivers that can be dispatched by the DXE Core. If a boot device cannot be - fully connected, this function calls the DXE Service Dispatch() to allow the - DXE drivers from any newly discovered firmware volumes to be dispatched. - Then the boot device connection can be attempted again. If the same boot - device connection operation fails twice in a row, then that boot device has - failed, and should be skipped. This function should never return. - - @param This The EFI_BDS_ARCH_PROTOCOL instance. - - @return None. - -**/ -VOID -EFIAPI -BdsEntry ( - IN EFI_BDS_ARCH_PROTOCOL *This - ) -{ - EFI_STATUS Status; - UINTN NoHandles; - EFI_HANDLE *Buffer; - EFI_HANDLE FvHandle; - EFI_HANDLE ImageHandle; - EFI_HANDLE UsbDeviceHandle; - EFI_GUID NameGuid; - UINTN Size; - UINTN HandleCount; - UINTN OldHandleCount; - EFI_HANDLE *HandleBuffer; - UINTN Index; - EFI_DEVICE_PATH_PROTOCOL *LoadImageDevicePath; - EFI_DEVICE_PATH_PROTOCOL *FileSystemDevicePath; - - PERF_END (NULL, "DXE", NULL, 0); - PERF_START (NULL, "BDS", NULL, 0); - - - // - // Now do the EFI stuff - // - Size = 0x100; - gST->FirmwareVendor = AllocateRuntimePool (Size); - ASSERT (gST->FirmwareVendor != NULL); - - UnicodeSPrint (gST->FirmwareVendor, Size, L"BeagleBoard EFI %a %a", __DATE__, __TIME__); - - // - // Now we need to setup the EFI System Table with information about the console devices. - // This code is normally in the console spliter driver on platforms that support multiple - // consoles at the same time - // - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextOutProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - // Use the first SimpleTextOut we find and update the EFI System Table - gST->ConsoleOutHandle = Buffer[0]; - gST->StandardErrorHandle = Buffer[0]; - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextOutProtocolGuid, (VOID **)&gST->ConOut); - ASSERT_EFI_ERROR (Status); - - gST->StdErr = gST->ConOut; - - gST->ConOut->OutputString (gST->ConOut, L"BDS: Console Started!!!!\n\r"); - FreePool (Buffer); - - gConsolePresent = TRUE; - } - - - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextInProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - // Use the first SimpleTextIn we find and update the EFI System Table - gST->ConsoleInHandle = Buffer[0]; - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextInProtocolGuid, (VOID **)&gST->ConIn); - ASSERT_EFI_ERROR (Status); - - FreePool (Buffer); - } - - // - // We now have EFI Consoles up and running. Print () will work now. DEBUG () and ASSERT () worked - // prior to this point as they were configured to use a more primative output scheme. - // - - // - //Perform Connect - // - HandleCount = 0; - while (1) { - OldHandleCount = HandleCount; - Status = gBS->LocateHandleBuffer ( - AllHandles, - NULL, - NULL, - &HandleCount, - &HandleBuffer - ); - if (EFI_ERROR (Status)) { - break; - } - - if (HandleCount == OldHandleCount) { - break; - } - - for (Index = 0; Index < HandleCount; Index++) { - gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE); - } - } - - EfiSignalEventReadyToBoot (); - - //Locate handles for SimpleFileSystem protocol - Status = gBS->LocateHandleBuffer ( - ByProtocol, - &gEfiSimpleFileSystemProtocolGuid, - NULL, - &HandleCount, - &HandleBuffer - ); - if (!EFI_ERROR(Status)) { - for (Index = 0; Index < HandleCount; Index++) { - //Get the device path - FileSystemDevicePath = DevicePathFromHandle(HandleBuffer[Index]); - if (FileSystemDevicePath == NULL) { - continue; - } - - //Check if UsbIo is on any handles in the device path. - Status = gBS->LocateDevicePath(&gEfiUsbIoProtocolGuid, &FileSystemDevicePath, &UsbDeviceHandle); - if (EFI_ERROR(Status)) { - continue; - } - - //Check if Usb stick has a magic EBL file. - LoadImageDevicePath = FileDevicePath(HandleBuffer[Index], L"Ebl.efi"); - Status = gBS->LoadImage (TRUE, gImageHandle, LoadImageDevicePath, NULL, 0, &ImageHandle); - if (EFI_ERROR(Status)) { - continue; - } - - //Boot to Shell on USB stick. - Status = gBS->StartImage (ImageHandle, NULL, NULL); - if (EFI_ERROR(Status)) { - continue; - } - } - } - - // - // Normal UEFI behavior is to process Globally Defined Variables as defined in Chapter 3 - // (Boot Manager) of the UEFI specification. For this embedded system we don't do this. - // - - // - // Search all the FVs for an application with a UI Section of Ebl. A .FDF file can be used - // to control the names of UI sections in an FV. - // - Status = FindApplicationMatchingUiSection (L"Ebl", &FvHandle, &NameGuid); - if (!EFI_ERROR (Status)) { - - //Boot to Shell. - Status = LoadPeCoffSectionFromFv (FvHandle, &NameGuid); - - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Boot from Shell failed. Status: %r\n", Status)); - } - } - - // - // EFI does not define the behaviour if all boot attemps fail and the last one returns. - // So we make a policy choice to reset the system since this BDS does not have a UI. - // - gRT->ResetSystem (EfiResetShutdown, Status, 0, NULL); - - return ; -} - - -EFI_STATUS -EFIAPI -BdsInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - // - // Install protocol interface - // - Status = gBS->InstallMultipleProtocolInterfaces ( - &ImageHandle, - &gEfiBdsArchProtocolGuid, &gBdsProtocol, - NULL - ); - ASSERT_EFI_ERROR (Status); - - return Status; -} - - diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h b/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h deleted file mode 100644 index 646f7b276d45..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h +++ /dev/null @@ -1,66 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __BDS_ENTRY_H__ -#define __BDS_ENTRY_H__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -EFI_STATUS -LoadPeCoffSectionFromFv ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ); - -EFI_STATUS -FindApplicationMatchingUiSection ( - IN CHAR16 *UiString, - OUT EFI_HANDLE *FvHandle, - OUT EFI_GUID *NameGuid - ); - -VOID -EFIAPI -BdsEntry ( - IN EFI_BDS_ARCH_PROTOCOL *This - ); - -#endif - diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c b/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c deleted file mode 100644 index 31e1c5100eff..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c +++ /dev/null @@ -1,150 +0,0 @@ -/** @file - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements - of the UEFI specification as it is designed to implement an embedded systmes - propriatary boot scheme. - - This template assume a DXE driver produces a SerialIo protocol not using the EFI - driver module and it will attempt to connect a console on top of this. - - - Copyright (c) 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "BdsEntry.h" - - -EFI_STATUS -FindApplicationMatchingUiSection ( - IN CHAR16 *UiString, - OUT EFI_HANDLE *FvHandle, - OUT EFI_GUID *NameGuid - ) -{ - EFI_STATUS Status; - EFI_STATUS NextStatus; - UINTN NoHandles; - EFI_HANDLE *Buffer; - UINTN Index; - EFI_FV_FILETYPE FileType; - EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv; - VOID *Key; - EFI_FV_FILE_ATTRIBUTES Attributes; - UINTN Size; - UINTN UiStringLen; - CHAR16 *UiSection; - UINT32 Authentication; - - - UiStringLen = 0; - if (UiString != NULL) { - DEBUG ((DEBUG_ERROR, "UiString %s\n", UiString)); - UiStringLen = StrLen (UiString); - } - - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiFirmwareVolume2ProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - for (Index = 0; Index < NoHandles; Index++) { - Status = gBS->HandleProtocol (Buffer[Index], &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv); - if (!EFI_ERROR (Status)) { - Key = AllocatePool (Fv->KeySize); - ASSERT (Key != NULL); - ZeroMem (Key, Fv->KeySize); - - FileType = EFI_FV_FILETYPE_APPLICATION; - - do { - NextStatus = Fv->GetNextFile (Fv, Key, &FileType, NameGuid, &Attributes, &Size); - if (!EFI_ERROR (NextStatus)) { - if (UiString == NULL) { - // - // If UiString is NULL match first application we find. - // - *FvHandle = Buffer[Index]; - FreePool (Key); - return Status; - } - - UiSection = NULL; - Status = Fv->ReadSection ( - Fv, - NameGuid, - EFI_SECTION_USER_INTERFACE, - 0, - (VOID **)&UiSection, - &Size, - &Authentication - ); - if (!EFI_ERROR (Status)) { - if (StrnCmp (UiString, UiSection, UiStringLen) == 0) { - // - // We found a UiString match. - // - *FvHandle = Buffer[Index]; - FreePool (Key); - FreePool (UiSection); - return Status; - } - FreePool (UiSection); - } - } - } while (!EFI_ERROR (NextStatus)); - - FreePool (Key); - } - } - - FreePool (Buffer); - } - - return EFI_NOT_FOUND; -} - - -EFI_DEVICE_PATH * -FvFileDevicePath ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ) -{ - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - MEDIA_FW_VOL_FILEPATH_DEVICE_PATH NewNode; - - DevicePath = DevicePathFromHandle (FvHandle); - - EfiInitializeFwVolDevicepathNode (&NewNode, NameGuid); - - return AppendDevicePathNode (DevicePath, (EFI_DEVICE_PATH_PROTOCOL *)&NewNode); -} - - - -EFI_STATUS -LoadPeCoffSectionFromFv ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ) -{ - EFI_STATUS Status; - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - EFI_HANDLE ImageHandle; - - DevicePath = FvFileDevicePath (FvHandle, NameGuid); - - Status = gBS->LoadImage (TRUE, gImageHandle, DevicePath, NULL, 0, &ImageHandle); - if (!EFI_ERROR (Status)) { - PERF_END (NULL, "BDS", NULL, 0); - Status = gBS->StartImage (ImageHandle, NULL, NULL); - } - - return Status; -} - diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec deleted file mode 100644 index 496442a627e8..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec +++ /dev/null @@ -1,36 +0,0 @@ -#/** @file -# Beagle board package. -# -# Copyright (c) 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials are licensed and made available under -# the terms and conditions of the BSD License which accompanies this distribution. -# The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - DEC_SPECIFICATION = 0x00010005 - PACKAGE_NAME = BeagleBoardPkg - PACKAGE_GUID = 6eba6648-d853-4eb3-9761-528b82d5ab04 - PACKAGE_VERSION = 0.1 - -################################################################################ -# -# Include Section - list of Include Paths that are provided by this package. -# Comments are used for Keywords and Module Types. -# -# Supported Module Types: -# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION -# -################################################################################ -[Includes.common] - Include # Root include for the package - -[Guids.common] - gBeagleBoardTokenSpaceGuid = { 0x6834fe45, 0x4aee, 0x4fc6, { 0xbc, 0xb5, 0xff, 0x45, 0xb7, 0xa8, 0x71, 0xe2 } } - diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc deleted file mode 100644 index f04aa983d307..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc +++ /dev/null @@ -1,481 +0,0 @@ -#/** @file -# Beagle board package. -# -# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -################################################################################ -# -# Defines Section - statements that will be processed to create a Makefile. -# -################################################################################ -[Defines] - PLATFORM_NAME = BeagleBoardPkg - PLATFORM_GUID = 91fa6c28-33df-46ac-aee6-292d6811ea31 - PLATFORM_VERSION = 0.1 - DSC_SPECIFICATION = 0x00010005 - OUTPUT_DIRECTORY = Build/BeagleBoard - SUPPORTED_ARCHITECTURES = ARM - BUILD_TARGETS = DEBUG|RELEASE - SKUID_IDENTIFIER = DEFAULT - FLASH_DEFINITION = OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf - - -[LibraryClasses.common] - ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf - ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf - ArmPlatformLib|OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf - ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA8Lib/ArmCortexA8Lib.inf - ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf - ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf - - HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf - UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf - -!if $(TARGET) == RELEASE - DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf - UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf -!else - DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf - UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf -# UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf -!endif - DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf - - MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf - - BaseLib|MdePkg/Library/BaseLib/BaseLib.inf - BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf - - EfiResetSystemLib|OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf - - PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf - PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf - PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf - - EfiFileLib|EmbeddedPkg/Library/EfiFileLib/EfiFileLib.inf - - # These libraries are used by the dynamic EFI Shell commands - ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf - FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf - SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf - - PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf - - # - # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window - # in the debugger will show load and unload commands for symbols. You can cut and paste this - # into the command window to load symbols. We should be able to use a script to do this, but - # the version of RVD I have does not support scipts accessing system memory. - # -# PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf - PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf -# PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf - - - CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf - DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf - CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf - PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf - - SerialPortLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf - SemihostLib|ArmPkg/Library/SemihostLib/SemihostLib.inf - - RealTimeClockLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf - - IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf - - MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf - UefiLib|MdePkg/Library/UefiLib/UefiLib.inf - HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf - UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf - DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf - UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf - - DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf - UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf - UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf - -# -# Assume everything is fixed at build -# - PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf - - UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf - - UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf - - CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf - - TimerLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf - OmapLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf - OmapDmaLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf - DebugAgentTimerLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf - - GdbSerialLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf - ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf - DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf - DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf - - NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf - BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf - FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf - -[LibraryClasses.common.SEC] - PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf - UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf - ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf - LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf - - PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf - - HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf - PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf - MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf - PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf - PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf - MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf - - # 1/123 faster than Stm or Vstm version - BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf - - # Uncomment to turn on GDB stub in SEC. - #DebugAgentLib|EmbeddedPkg/Library/GdbDebugAgent/GdbDebugAgent.inf - -[LibraryClasses.common.PEI_CORE] - PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf - -[LibraryClasses.common.DXE_CORE] - HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf - MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf - DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf - ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf - UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf - DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf -# PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf - PeCoffLib|EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf - - PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf - - -[LibraryClasses.common.DXE_DRIVER] - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf - DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf - SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf - PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf - -[LibraryClasses.common.UEFI_APPLICATION] - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf - UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf - PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf - HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf - -[LibraryClasses.common.UEFI_DRIVER] - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf - UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf - ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf - PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf - DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf - -[LibraryClasses.common.DXE_RUNTIME_DRIVER] - HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf - MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf - ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf - CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf -# PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf - PeCoffLib|EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf - - -[LibraryClasses.ARM] - # - # It is not possible to prevent the ARM compiler for generic intrinsic functions. - # This library provides the instrinsic functions generate by a given compiler. - # [LibraryClasses.ARM] and NULL mean link this library into all ARM images. - # - NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf - - # Add support for GCC stack protector - NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf - -[BuildOptions] - XCODE:*_*_ARM_PLATFORM_FLAGS == -arch armv7 - - GCC:*_*_ARM_PLATFORM_FLAGS == -march=armv7-a - - RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A8 - -################################################################################ -# -# Pcd Section - list of all EDK II PCD Entries defined by this Platform -# -################################################################################ - -[PcdsFeatureFlag.common] - gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE - gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE - gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE - gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE - - # - # Control what commands are supported from the UI - # Turn these on and off to add features or save size - # - gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE - gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE - gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE - gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE - gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE - gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE - gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE - - gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE - - # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress - gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE - - gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE - gArmTokenSpaceGuid.PcdCpuDxeProduceDebugSupport|FALSE - - gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE - - ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe. - # It could be set FALSE to save size. - gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE - -[PcdsFixedAtBuild.common] - gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Beagle Board" - - gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt|"BeagleEdk2" - gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000 - gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000 - gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000 - gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000 - gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF - gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1 - gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0 - gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320 - -# DEBUG_ASSERT_ENABLED 0x01 -# DEBUG_PRINT_ENABLED 0x02 -# DEBUG_CODE_ENABLED 0x04 -# CLEAR_MEMORY_ENABLED 0x08 -# ASSERT_BREAKPOINT_ENABLED 0x10 -# ASSERT_DEADLOOP_ENABLED 0x20 -!if $(TARGET) == RELEASE - gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21 -!else - gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f -!endif - -# DEBUG_INIT 0x00000001 // Initialization -# DEBUG_WARN 0x00000002 // Warnings -# DEBUG_LOAD 0x00000004 // Load events -# DEBUG_FS 0x00000008 // EFI File system -# DEBUG_POOL 0x00000010 // Alloc & Free's -# DEBUG_PAGE 0x00000020 // Alloc & Free's -# DEBUG_INFO 0x00000040 // Verbose -# DEBUG_DISPATCH 0x00000080 // PEI/DXE Dispatchers -# DEBUG_VARIABLE 0x00000100 // Variable -# DEBUG_BM 0x00000400 // Boot Manager -# DEBUG_BLKIO 0x00001000 // BlkIo Driver -# DEBUG_NET 0x00004000 // SNI Driver -# DEBUG_UNDI 0x00010000 // UNDI Driver -# DEBUG_LOADFILE 0x00020000 // UNDI Driver -# DEBUG_EVENT 0x00080000 // Event messages -# DEBUG_ERROR 0x80000000 // Error - gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F - - gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07 - - gEmbeddedTokenSpaceGuid.PcdEmbeddedAutomaticBootCommand|"" - gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07 - gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000 - -# -# Optional feature to help prevent EFI memory map fragments -# Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob -# Values are in EFI Pages (4K). DXE Core will make sure that -# at least this much of each type of memory can be allocated -# from a single memory range. This way you only end up with -# maximum of two fragements for each type in the memory map -# (the memory used, and the free memory that was prereserved -# but not used). -# - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|80 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|40 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|3000 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|10 - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0 - - -# -# Beagle board Specific PCDs -# - gArmTokenSpaceGuid.PcdVFPEnabled|1 - - gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000 - gArmTokenSpaceGuid.PcdSystemMemorySize|0x08000000 - - # Size of the region used by UEFI in permanent memory (Reserved 16MB) - gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x01000000 - - # Size of the region reserved for fixed address allocations (Reserved 32MB) - gArmTokenSpaceGuid.PcdArmLinuxKernelMaxOffset|0x02000000 - - gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0x80008000 - gArmTokenSpaceGuid.PcdCpuResetAddress|0x80008000 - - gEmbeddedTokenSpaceGuid.PcdTimerPeriod|100000 - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds|77 - gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz|13000000 - - # We want to use the Shell Libraries but don't want it to initialise - # automatically. We initialise the libraries when the command is called by the - # Shell. - gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE - - # - # ARM Pcds - # - gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000 - - gArmPlatformTokenSpaceGuid.PcdDefaultBootDescription|L"Linux from SD" - gArmPlatformTokenSpaceGuid.PcdDefaultBootDevicePath|L"VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/Image" - gArmPlatformTokenSpaceGuid.PcdDefaultBootArgument|"console=tty0 console=ttyS2,115200n8 root=UUID=a4af765b-c2b5-48f4-9564-7a4e9104c4f6 rootwait ro earlyprintk" - gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|10 - - gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi();VenHw(E68088EF-D1A4-4336-C1DB-4D3A204730A6)" - gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()" - -################################################################################ -# -# Components Section - list of all EDK II Modules needed by this Platform -# -################################################################################ -[Components.common] - - # - # SEC - # - ArmPlatformPkg/PrePi/PeiUniCore.inf - - # - # DXE - # - MdeModulePkg/Core/Dxe/DxeMain.inf { - - PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf - NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf - NULL|EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf - } - - ArmPkg/Drivers/CpuDxe/CpuDxe.inf - - MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf - MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf - MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf - MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf - MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf - EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf - - MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf - MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf - MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf - MdeModulePkg/Universal/SerialDxe/SerialDxe.inf - MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf -# -# This version uses semi-hosting console -# EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf { -# -# SerialPortLib|ArmPkg/Library/SemiHostingSerialPortLib/SemiHostingSerialPortLib.inf -# } - - EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf - EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf - EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf - - # - # Semi-hosting filesystem - # - ArmPkg/Filesystem/SemihostFs/SemihostFs.inf - - # - # FAT filesystem + GPT/MBR partitioning - # - MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf - MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf - MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf - - # - # USB - # - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf - - MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf { - - gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800fffff - } - - MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf - MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf - - # - # Nand Flash - # - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf - - # - # MMC/SD - # - EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf - - # - # I2C - # - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf - - # - # SoC Drivers - # - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf - - # - # Power IC - # - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf - - # - # Bds - # - MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf - MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf - ArmPlatformPkg/Bds/Bds.inf - - # Legacy Linux Loader - ArmPkg/Application/LinuxLoader/LinuxLoader.inf - - # - # Example Application - # - MdeModulePkg/Application/HelloWorld/HelloWorld.inf - diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf deleted file mode 100644 index 9728efd43b76..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf +++ /dev/null @@ -1,310 +0,0 @@ -# FLASH layout file for Beagle board. -# -# Copyright (c) 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -################################################################################ -# -# FD Section -# The [FD] Section is made up of the definition statements and a -# description of what goes into the Flash Device Image. Each FD section -# defines one flash "device" image. A flash device image may be one of -# the following: Removable media bootable image (like a boot floppy -# image,) an Option ROM image (that would be "flashed" into an add-in -# card,) a System "Flash" image (that would be burned into a system's -# flash) or an Update ("Capsule") image that will be used to update and -# existing system flash. -# -################################################################################ - - -[FD.BeagleBoard_EFI] -BaseAddress = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device. -Size = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device -ErasePolarity = 1 -BlockSize = 0x1 -NumBlocks = 0xB0000 - -################################################################################ -# -# Following are lists of FD Region layout which correspond to the locations of different -# images within the flash device. -# -# Regions must be defined in ascending order and may not overlap. -# -# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by -# the pipe "|" character, followed by the size of the region, also in hex with the leading -# "0x" characters. Like: -# Offset|Size -# PcdOffsetCName|PcdSizeCName -# RegionType -# -################################################################################ -0x00000000|0x000B0000 -gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize -FV = FVMAIN_COMPACT - -################################################################################ -# -# FV Section -# -# [FV] section is used to define what components or modules are placed within a flash -# device file. This section also defines order the components and modules are positioned -# within the image. The [FV] section consists of define statements, set statements and -# module statements. -# -################################################################################ - -[FV.FvMain] -BlockSize = 0x1 -NumBlocks = 0 # This FV gets compressed so make it just big enough -FvAlignment = 8 # FV alignment and FV attributes setting. -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE -FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282 - - INF MdeModulePkg/Core/Dxe/DxeMain.inf - - # - # PI DXE Drivers producing Architectural Protocols (EFI Services) - # - INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf - - INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf - INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf - INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf - INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf - INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf - INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf - - INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf - INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf - INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf - INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf - INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf - - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf - INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf - INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf - -!if $(TARGET) == RELEASE - # - # Semi-hosting filesystem - # - INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf -!endif - - # - # Nand Flash - # - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf - - # - # MMC/SD - # - INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf - - # - # I2C - # - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf - - # - # SoC Drivers - # - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf - - # - # Power IC - # - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf - - # - # FAT filesystem + GPT/MBR partitioning - # - INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf - INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf - INF FatBinPkg/EnhancedFatDxe/Fat.inf - INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf - - # - # USB Support - # - - INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf - - INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf - INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf - INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf - - # - # UEFI application (Shell Embedded Boot Loader) - # - INF ShellBinPkg/UefiShell/UefiShell.inf - - # - # Bds - # - INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf - INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf - INF ArmPlatformPkg/Bds/Bds.inf - - # Legacy Linux Loader - INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf - - -[FV.FVMAIN_COMPACT] -FvAlignment = 8 -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE - - INF ArmPlatformPkg/PrePi/PeiUniCore.inf - - FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { - SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { - SECTION FV_IMAGE = FVMAIN - } - } - - -################################################################################ -# -# Rules are use with the [FV] section's module INF type to define -# how an FFS file is created for a given INF file. The following Rule are the default -# rules for the different module type. User can add the customized rules to define the -# content of the FFS file. -# -################################################################################ - - -############################################################################ -# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # -############################################################################ -# -#[Rule.Common.DXE_DRIVER] -# FILE DRIVER = $(NAMED_GUID) { -# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex -# COMPRESS PI_STD { -# GUIDED { -# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi -# UI STRING="$(MODULE_NAME)" Optional -# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) -# } -# } -# } -# -############################################################################ - -[Rule.Common.SEC] - FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { - TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi - } - -[Rule.Common.PEI_CORE] - FILE PEI_CORE = $(NAMED_GUID) { - TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING ="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM] - FILE PEIM = $(NAMED_GUID) { - PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM.TIANOCOMPRESSED] - FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { - PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex - GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - } - -[Rule.Common.DXE_CORE] - FILE DXE_CORE = $(NAMED_GUID) { - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - - -[Rule.Common.UEFI_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_RUNTIME_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.UEFI_APPLICATION] - FILE APPLICATION = $(NAMED_GUID) { - UI STRING ="$(MODULE_NAME)" Optional - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi - } - -[Rule.Common.UEFI_DRIVER.BINARY] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) - } - -[Rule.Common.UEFI_APPLICATION.BINARY] - FILE APPLICATION = $(NAMED_GUID) { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) - } diff --git a/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat b/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat deleted file mode 100644 index 5f6897e306d8..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat +++ /dev/null @@ -1,41 +0,0 @@ -PRM_CLKSRC_CTRL=0x00000080 -PRM_CLKSEL=0x00000003 -CM_CLKSEL1_EMU=0x03020A50 -CM_CLKSEL_CORE=0x0000030A -CM_CLKSEL_WKUP=0x00000015 -CM_CLKEN_PLL_DPLL3=0x00370037 -CM_AUTOIDLE_PLL_DPLL3=0x00000000 -CM_CLKSEL1_PLL=0x094C0C00 -CM_CLKEN_PLL_DPLL4=0x00370037 -CM_AUTOIDLE_PLL_DPLL4=0x00000000 -CM_CLKSEL2_PLL=0x0001B00C -CM_CLKSEL3_PLL=0x00000009 -CM_CLKEN_PLL_MPU=0x00000037 -CM_AUTOIDLE_PLL_MPU=0x00000000 -CM_CLKSEL1_PLL_MPU=0x0011F40C -CM_CLKSEL2_PLL_MPU=0x00000001 -CM_CLKSTCTRL_MPU=0x00000000 -SDRC_SYSCONFIG_LSB=0x0000 -SDRC_CS_CFG_LSB=0x0001 -SDRC_SHARING_LSB=0x0100 -SDRC_ERR_TYPE_LSB=0x0000 -SDRC_DLLA_CTRL=0x0000000A -SDRC_POWER=0x00000081 -MEMORY_TYPE_CS0=0x0003 -SDRC_MCFG_0=0x02D04011 -SDRC_MR_0_LSB=0x0032 -SDRC_EMR1_0_LSB=0x0000 -SDRC_EMR2_0_LSB=0x0000 -SDRC_EMR3_0_LSB=0x0000 -SDRC_ACTIM_CTRLA_0=0xBA9DC4C6 -SDRC_ACTIM_CTRLB_0=0x00012522 -SDRC_RFRCTRL_0=0x0004E201 -MEMORY_TYPE_CS1=0x0003 -SDRC_MCFG_1=0x02D04011 -SDRC_MR_1_LSB=0x0032 -SDRC_EMR1_1_LSB=0x0000 -SDRC_EMR2_1_LSB=0x0000 -SDRC_EMR3_1_LSB=0x0000 -SDRC_ACTIM_CTRLA_1=0xBA9DC4C6 -SDRC_ACTIM_CTRLB_1=0x00012522 -SDRC_RFRCTRL_1=0x0004E201 diff --git a/Platforms/TexasInstruments/BeagleBoard/Contributions.txt b/Platforms/TexasInstruments/BeagleBoard/Contributions.txt deleted file mode 100644 index f87cbd73c693..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Contributions.txt +++ /dev/null @@ -1,218 +0,0 @@ - -====================== -= Code Contributions = -====================== - -To make a contribution to a TianoCore project, follow these steps. -1. Create a change description in the format specified below to - use in the source control commit log. -2. Your commit message must include your "Signed-off-by" signature, - and "Contributed-under" message. -3. Your "Contributed-under" message explicitly states that the - contribution is made under the terms of the specified - contribution agreement. Your "Contributed-under" message - must include the name of contribution agreement and version. - For example: Contributed-under: TianoCore Contribution Agreement 1.0 - The "TianoCore Contribution Agreement" is included below in - this document. -4. Submit your code to the TianoCore project using the process - that the project documents on its web page. If the process is - not documented, then submit the code on development email list - for the project. -5. It is preferred that contributions are submitted using the same - copyright license as the base project. When that is not possible, - then contributions using the following licenses can be accepted: - * BSD (2-clause): http://opensource.org/licenses/BSD-2-Clause - * BSD (3-clause): http://opensource.org/licenses/BSD-3-Clause - * MIT: http://opensource.org/licenses/MIT - * Python-2.0: http://opensource.org/licenses/Python-2.0 - * Zlib: http://opensource.org/licenses/Zlib - - Contributions of code put into the public domain can also be - accepted. - - Contributions using other licenses might be accepted, but further - review will be required. - -===================================================== -= Change Description / Commit Message / Patch Email = -===================================================== - -Your change description should use the standard format for a -commit message, and must include your "Signed-off-by" signature -and the "Contributed-under" message. - -== Sample Change Description / Commit Message = - -=== Start of sample patch email message === - -From: Contributor Name -Subject: [PATCH] CodeModule: Brief-single-line-summary - -Full-commit-message - -Contributed-under: TianoCore Contribution Agreement 1.0 -Signed-off-by: Contributor Name ---- - -An extra message for the patch email which will not be considered part -of the commit message can be added here. - -Patch content inline or attached - -=== End of sample patch email message === - -=== Notes for sample patch email === - -* The first line of commit message is taken from the email's subject - line following [PATCH]. The remaining portion of the commit message - is the email's content until the '---' line. -* git format-patch is one way to create this format - -=== Definitions for sample patch email === - -* "CodeModule" is a short idenfier for the affected code. For - example MdePkg, or MdeModulePkg UsbBusDxe. -* "Brief-single-line-summary" is a short summary of the change. -* The entire first line should be less than ~70 characters. -* "Full-commit-message" a verbose multiple line comment describing - the change. Each line should be less than ~70 characters. -* "Contributed-under" explicitely states that the contribution is - made under the terms of the contribtion agreement. This - agreement is included below in this document. -* "Signed-off-by" is the contributor's signature identifying them - by their real/legal name and their email address. - -======================================== -= TianoCore Contribution Agreement 1.0 = -======================================== - -INTEL CORPORATION ("INTEL") MAKES AVAILABLE SOFTWARE, DOCUMENTATION, -INFORMATION AND/OR OTHER MATERIALS FOR USE IN THE TIANOCORE OPEN SOURCE -PROJECT (COLLECTIVELY "CONTENT"). USE OF THE CONTENT IS GOVERNED BY THE -TERMS AND CONDITIONS OF THIS AGREEMENT BETWEEN YOU AND INTEL AND/OR THE -TERMS AND CONDITIONS OF LICENSE AGREEMENTS OR NOTICES INDICATED OR -REFERENCED BELOW. BY USING THE CONTENT, YOU AGREE THAT YOUR USE OF THE -CONTENT IS GOVERNED BY THIS AGREEMENT AND/OR THE TERMS AND CONDITIONS -OF ANY APPLICABLE LICENSE AGREEMENTS OR NOTICES INDICATED OR REFERENCED -BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS -AGREEMENT AND THE TERMS AND CONDITIONS OF ANY APPLICABLE LICENSE -AGREEMENTS OR NOTICES INDICATED OR REFERENCED BELOW, THEN YOU MAY NOT -USE THE CONTENT. - -Unless otherwise indicated, all Content made available on the TianoCore -site is provided to you under the terms and conditions of the BSD -License ("BSD"). A copy of the BSD License is available at -http://opensource.org/licenses/bsd-license.php -or when applicable, in the associated License.txt file. - -Certain other content may be made available under other licenses as -indicated in or with such Content. (For example, in a License.txt file.) - -You accept and agree to the following terms and conditions for Your -present and future Contributions submitted to TianoCore site. Except -for the license granted to Intel hereunder, You reserve all right, -title, and interest in and to Your Contributions. - -== SECTION 1: Definitions == -* "You" or "Contributor" shall mean the copyright owner or legal - entity authorized by the copyright owner that is making a - Contribution hereunder. All other entities that control, are - controlled by, or are under common control with that entity are - considered to be a single Contributor. For the purposes of this - definition, "control" means (i) the power, direct or indirect, to - cause the direction or management of such entity, whether by - contract or otherwise, or (ii) ownership of fifty percent (50%) - or more of the outstanding shares, or (iii) beneficial ownership - of such entity. -* "Contribution" shall mean any original work of authorship, - including any modifications or additions to an existing work, - that is intentionally submitted by You to the TinaoCore site for - inclusion in, or documentation of, any of the Content. For the - purposes of this definition, "submitted" means any form of - electronic, verbal, or written communication sent to the - TianoCore site or its representatives, including but not limited - to communication on electronic mailing lists, source code - control systems, and issue tracking systems that are managed by, - or on behalf of, the TianoCore site for the purpose of - discussing and improving the Content, but excluding - communication that is conspicuously marked or otherwise - designated in writing by You as "Not a Contribution." - -== SECTION 2: License for Contributions == -* Contributor hereby agrees that redistribution and use of the - Contribution in source and binary forms, with or without - modification, are permitted provided that the following - conditions are met: -** Redistributions of source code must retain the Contributor's - copyright notice, this list of conditions and the following - disclaimer. -** Redistributions in binary form must reproduce the Contributor's - copyright notice, this list of conditions and the following - disclaimer in the documentation and/or other materials provided - with the distribution. -* Disclaimer. None of the names of Contributor, Intel, or the names - of their respective contributors may be used to endorse or - promote products derived from this software without specific - prior written permission. -* Contributor grants a license (with the right to sublicense) under - claims of Contributor's patents that Contributor can license that - are infringed by the Contribution (as delivered by Contributor) to - make, use, distribute, sell, offer for sale, and import the - Contribution and derivative works thereof solely to the minimum - extent necessary for licensee to exercise the granted copyright - license; this patent license applies solely to those portions of - the Contribution that are unmodified. No hardware per se is - licensed. -* EXCEPT AS EXPRESSLY SET FORTH IN SECTION 3 BELOW, THE - CONTRIBUTION IS PROVIDED BY THE CONTRIBUTOR "AS IS" AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - CONTRIBUTOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE - CONTRIBUTION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - DAMAGE. - -== SECTION 3: Representations == -* You represent that You are legally entitled to grant the above - license. If your employer(s) has rights to intellectual property - that You create that includes Your Contributions, You represent - that You have received permission to make Contributions on behalf - of that employer, that Your employer has waived such rights for - Your Contributions. -* You represent that each of Your Contributions is Your original - creation (see Section 4 for submissions on behalf of others). - You represent that Your Contribution submissions include complete - details of any third-party license or other restriction - (including, but not limited to, related patents and trademarks) - of which You are personally aware and which are associated with - any part of Your Contributions. - -== SECTION 4: Third Party Contributions == -* Should You wish to submit work that is not Your original creation, - You may submit it to TianoCore site separately from any - Contribution, identifying the complete details of its source - and of any license or other restriction (including, but not - limited to, related patents, trademarks, and license agreements) - of which You are personally aware, and conspicuously marking the - work as "Submitted on behalf of a third-party: [named here]". - -== SECTION 5: Miscellaneous == -* Applicable Laws. Any claims arising under or relating to this - Agreement shall be governed by the internal substantive laws of - the State of Delaware or federal courts located in Delaware, - without regard to principles of conflict of laws. -* Language. This Agreement is in the English language only, which - language shall be controlling in all respects, and all versions - of this Agreement in any other language shall be for accommodation - only and shall not be binding. All communications and notices made - or given pursuant to this Agreement, and all documentation and - support to be provided, unless otherwise noted, shall be in the - English language. - diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc deleted file mode 100644 index a4e96747f8d2..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc +++ /dev/null @@ -1,21 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// -error = continue -unload -error = abort - -setreg @CP15_CONTROL = 0x0005107E -setreg @pc=0x80008208 -setreg @cpsr=0x000000D3 -dis/D -readfile,raw,nowarn "ZZZZZZ/FV/BEAGLEBOARD_EFI.fd"=0x80008000 - diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh deleted file mode 100755 index 67fdfe1efa14..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http:#opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - - -IN=`/usr/bin/cygpath -u $1` -OUT=`/usr/bin/cygpath -u $2` - -/usr/bin/sed -e "s/\/cygdrive\/\(.\)/load\/a\/ni\/np \"\1:/g" \ - -e 's:\\:/:g' \ - -e "s/^/load\/a\/ni\/np \"/g" \ - -e "s/dll /dll\" \&/g" \ - $IN | /usr/bin/sort.exe --key=3 --output=$OUT - diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf deleted file mode 100755 index 17fabaa6cc649d520848f087954c0729043bf001..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 7984 zcmbVRZERcDd44ZRnY3iPwCQ$+=LU4Zwq6p;vganAF|?8`#nvjvj3mcis+FS1D~S!i za7o%$YS@%3eDNK>lfYWA*T&CZW3b-hrU^ zUZwWhDv{UmNKd6My?CN{#w+z;czE%od}Z7JG@CD;?VhjoU@See1M48;>$%$S_PkQ1 z{HT|vEA@w(J8I}_TSV@9W&7I~&HnoGKJ*^|zF_v(m;bZbyt@W|YQ5XvCjSY{YrWT( z>Ay&|&bc+gtBp<2`ONMOKc~I>So}w^;-D=9KTTUc@CG4!x7ob24s!-{`Kpx~b<-aC zs5=C#LEnZCSL%V_Ttj585u(i?)`Br@P&fUavE{sSec2a&wXwDbwyI~VUinN-!n2J| zkr&tX{6$sU{PJP~G=Fe*(ckm!xx>ugAd4rW%kMvc2uoEo9M%eV#To>`e{_Ssn z0(Q7g)4yn?_DK!C!awP~)bK?w!M{o^AeS0z(f>8#rT9GgO3gctN3I}VRt(HOSgB)u zW=y19sSR-rn3KzxE0-IJrUlE3zTgWD($pNs0ePXtL%ha;gBU+xOWASt%tc2K@d#IH zt9p>bTbCB^X;}Z+>&vaYag7c+Gd{?t6yJsJ{n}H-zQhi+;e>YyoeL~ zP(b&f+t;(*T7NI&KD+3RE+EgZBL02V4vE%K%a72ffV|r1kaG1e8T;}1+AAVmzTm5n zy@Kayw~NqokvXpW7A`gd3vV_y zs{FiseOc>$Yf0p2y#q22%V_;$G8*#bE1K_eMf(WOjV|oXG0fwb*evo^<6()`$0Qp1 z7#`H7rj4KX;5_Q|%V-Vp_in;i!0$KvqllMm4g;^2{tZ6JXd++Mdf!;8V&8Vk5ya+C zy|4k9N_}-0`GwD#ys_kyOV;`?!*BWbhBp5aaJ1fuHFi`gP%~QpL9@A;ap_uLsr@-) z0$J8Pb;0f(E&LO#Z5Z`l_Q>q4zeA4Ie${O5l`v{#>+FAg6FzJ~p1H@oa%q{l{2*j` z_RtpU8g?q7EvQKW--kfkh`f-`7lwa06Ugg>4{L%~8i6qL9j$Mas~y3fD`uSiu#MXF z3UqAy-)6HPwIz1#ExGD$8Q84-d)Ao*+o*fF%X1DfzQeur!(TV=T6-s2|NCDzHh(Jku!`^zNjbVaH$y1O@^meh$4B$ z1h&=L(+M3sqqW|-#kH(A#9rh!YC0N1JU1gqceLoaMbrprM?m{gi$>Wz{HMME^fGpW z^UaHS#x4Ng=s$8{om;`Od3G{3e8yq8w~Q+aeG| zj)yus`@68|sAn3_QrQ~!y{yf7LZ=5hZ$M99ml<=)$t-e!F6y*n8->8B(a`A|$~N;v znO?|HcZ;n*bP8+m^mg{&2uT;bRf83O(`At$WT=C(*P!D*dieE%=c4z5?|et-bA9Jl z&G|#eXF@Z5oj2b2&UfDoo$l)j9p}0z^V-=5)?%)g{(KGdjLSiL?O}{Lf5V<%@pHv5 z>LkxC@c7W%q7t#^Z)1KO<7q1{=R61BFvF0x8C4E#9r{4s0(yyu*E&WDm`3anjX`9Z#G;A37Pk6mPLMWB_2 z^vEBy;5$vOPs(aSGuIn%V4VH3$AQV;>%wUVCjUtXCjTiHo^#=w4ovxfb70CZxiHTH zt6BbXk2*2;nG=@0jd)ij*`$c+P&&OKu_%Rknw6SH0w zru;PrraWuaYL@=5IWXz0SttEX2PU0$tLVh6QzvF!Ix%a|iCKdR)4zxVQy**5YIgix zn0r~#@lqwXU6^;O)jaYcHAL@|cbbFfSuX+fUi`W|j9xX;M-@O%{8{4i3O{~>wVKj5 zSH_u(S?ascqORCu{c+Eb{-rkbCD6I&Nx#;H&U)m0JGz_y>n{2C!vE~z|5xC2*}9`> z&rN6ixF3R=%?>P{!!aK&fVg}(sI`+JY=&tJLdUkC05{V|*V z9S1##dj2C12zCp4-f2EXT( z16Jof@jn93l`a2>zXd!G%=aVWe*wM$%z7by3-~6mqE~^JfO%e%-T+p=9f*GgtbP{| zcY3Y!^1jW#30S?qll};>Ivn?RVl|0IU5?9E9Q5?fZN^@Md83?o0Y3Himk67OFV^>hBz|dJm?)F9EClN&L6KYJU;`1F+gZlwSbmeu=2{0jv5a{b#_c z-iiMUSe<{=#~0RHkY^+Pp^laJiy-K`fYtj2*MGpq$w(wF zktF_g8+tsQj2Gjg?;X?AMk+Cu)Q{`wu~a^nESwk{cye&;z~InYqwy)=p~1-6M6 zp3JARDUwe{Ci7`LgbyqN_Tu?GO->Y)T6!5zr*nxF*Hcs3c-jpWza6YZyjau?7(=iM z7I?tabUd3(>jvYqb*l|x&!=QxDV0w46^lk{qEyrikx1Y0q1fO^-|^j%Ly_n}q;K!g zu3eF1dxv)JjErD3I504$?;en_3M54n3BYPqPeftKF?~+)oRM2BcZ{oRFVp>l;mI(oAtIW;>tG#gmwH zpqNpltaBz?N~c{@&+A6cjB_l;mBfvyp_r~RFELv)Y7`kjOR#=&g6;7n!0tg1Cv13*YSe~u8Unu5`_>^utoJ+*h9GfvR zOAdfRo6?Ksq!o-rE|Wp=K&#Pm!7!Jail?2nhL6UEQW-OxrZZScAs3oW=o?bW#w}NpmH|QXv*kCJjpq*KUT+(5F&4gw}~-Qzh(C%t3f$@WAlsp@Bn+ zqm`;cYRZvx#fJ4{Q6jNeQlE^M(nylI>0-%L0qH@l6pJ$_jKs9iE4vD?sgdPGE;|X8 z`I4cd7GlXHTTf~DfYSfT<4Ge}V+^6X$FVsYU7#nElv z+vs|cA#_&5I6Rcf;xK$HJp9c5(Le0&34hw$(&5KHzVpvIWiXq^C*u7`A!@#`7dM`H z=;rX5WBAaH(dklVBD{ac{zo4rPdNN>i~(Bc9QvyD*a}#wXAh z4YSYYikM~jV(plowh2(hSGV2NS+<^~Rk+*y!fz5~#`^s>>fr-%Qx|nomugBEzPsD+ z>DC>)35LcM6MDtRuTGBFN+I7@716;T#+a{Xs@=r5#4sLQ(SlbjQy+gME diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc deleted file mode 100644 index dbce4dfdbd5f..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc +++ /dev/null @@ -1,67 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - -error = continue -unload -error = abort - -setreg @CP15_CONTROL = 0x0005107E -setreg @cpsr=0x000000D3 - -; General clock settings. -setmem /32 0x48307270=0x00000080 -setmem /32 0x48306D40=0x00000003 -setmem /32 0x48005140=0x03020A50 - -;Clock configuration -setmem /32 0x48004A40=0x0000030A -setmem /32 0x48004C40=0x00000015 - -;DPLL3 (Core) settings -setmem /32 0x48004D00=0x00370037 -setmem /32 0x48004D30=0x00000000 -setmem /32 0x48004D40=0x094C0C00 - -;DPLL4 (Peripheral) settings -setmem /32 0x48004D00=0x00370037 -setmem /32 0x48004D30=0x00000000 -setmem /32 0x48004D44=0x0001B00C -setmem /32 0x48004D48=0x00000009 - -;DPLL1 (MPU) settings -setmem /32 0x48004904=0x00000037 -setmem /32 0x48004934=0x00000000 -setmem /32 0x48004940=0x0011F40C -setmem /32 0x48004944=0x00000001 -setmem /32 0x48004948=0x00000000 - -;RAM setup. -setmem /16 0x6D000010=0x0000 -setmem /16 0x6D000040=0x0001 -setmem /16 0x6D000044=0x0100 -setmem /16 0x6D000048=0x0000 -setmem /32 0x6D000060=0x0000000A -setmem /32 0x6D000070=0x00000081 -setmem /16 0x6D000040=0x0003 -setmem /32 0x6D000080=0x02D04011 -setmem /16 0x6D000084=0x0032 -setmem /16 0x6D00008C=0x0000 -setmem /32 0x6D00009C=0xBA9DC4C6 -setmem /32 0x6D0000A0=0x00012522 -setmem /32 0x6D0000A4=0x0004E201 -setmem /16 0x6D000040=0x0003 -setmem /32 0x6D0000B0=0x02D04011 -setmem /16 0x6D0000B4=0x0032 -setmem /16 0x6D0000BC=0x0000 -setmem /32 0x6D0000C4=0xBA9DC4C6 -setmem /32 0x6D0000C8=0x00012522 -setmem /32 0x6D0000D4=0x0004E201 diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc deleted file mode 100644 index 33e3eacac45d..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc +++ /dev/null @@ -1,23 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - -include 'ZZZZZZ/rvi_symbols_macros.inc' - -macro write_symbols_file("ZZZZZZ/rvi_symbols.tmp", 0x00000000, 0x10000000) - -host "bash -o igncr ZZZZZZ/rvi_convert_symbols.sh ZZZZZZ/rvi_symbols.tmp ZZZZZZ/rvi_symbols.inc" -include 'ZZZZZZ/rvi_symbols.inc' -load /NI /NP 'ZZZZZZ/rvi_dummy.axf' ;.constdata -unload rvi_dummy.axf -delfile rvi_dummy.axf - - diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc deleted file mode 100755 index 0fc2c64b1a27..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc +++ /dev/null @@ -1,194 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - -define /R int compare_guid(guid1, guid2) - unsigned char *guid1; - unsigned char *guid2; -{ - return strncmp(guid1, guid2, 16); -} -. - -define /R unsigned char * find_system_table(mem_start, mem_size) - unsigned char *mem_start; - unsigned long mem_size; -{ - unsigned char *mem_ptr; - - mem_ptr = mem_start + mem_size; - - do - { - mem_ptr -= 0x400000; // 4 MB - - if (strncmp(mem_ptr, "IBI SYST", 8) == 0) - { - return *(unsigned long *)(mem_ptr + 8); // EfiSystemTableBase - } - - } while (mem_ptr > mem_start); - - return 0; -} -. - -define /R unsigned char * find_debug_info_table_header(system_table) - unsigned char *system_table; -{ - unsigned long configuration_table_entries; - unsigned char *configuration_table; - unsigned long index; - unsigned char debug_table_guid[16]; - - // Fill in the debug table's guid - debug_table_guid[ 0] = 0x77; - debug_table_guid[ 1] = 0x2E; - debug_table_guid[ 2] = 0x15; - debug_table_guid[ 3] = 0x49; - debug_table_guid[ 4] = 0xDA; - debug_table_guid[ 5] = 0x1A; - debug_table_guid[ 6] = 0x64; - debug_table_guid[ 7] = 0x47; - debug_table_guid[ 8] = 0xB7; - debug_table_guid[ 9] = 0xA2; - debug_table_guid[10] = 0x7A; - debug_table_guid[11] = 0xFE; - debug_table_guid[12] = 0xFE; - debug_table_guid[13] = 0xD9; - debug_table_guid[14] = 0x5E; - debug_table_guid[15] = 0x8B; - - configuration_table_entries = *(unsigned long *)(system_table + 64); - configuration_table = *(unsigned long *)(system_table + 68); - - for (index = 0; index < configuration_table_entries; index++) - { - if (compare_guid(configuration_table, debug_table_guid) == 0) - { - return *(unsigned long *)(configuration_table + 16); - } - - configuration_table += 20; - } - - return 0; -} -. - -define /R int valid_pe_header(header) - unsigned char *header; -{ - if ((header[0x00] == 'M') && - (header[0x01] == 'Z') && - (header[0x80] == 'P') && - (header[0x81] == 'E')) - { - return 1; - } - - return 0; -} -. - -define /R unsigned long pe_headersize(header) - unsigned char *header; -{ - unsigned long *size; - - size = header + 0x00AC; - - return *size; -} -. - -define /R unsigned char *pe_filename(header) - unsigned char *header; -{ - unsigned long *debugOffset; - unsigned char *stringOffset; - - if (valid_pe_header(header)) - { - debugOffset = header + 0x0128; - stringOffset = header + *debugOffset + 0x002C; - - return stringOffset; - } - - return 0; -} -. - -define /R int char_is_valid(c) - unsigned char c; -{ - if (c >= 32 && c < 127) - return 1; - - return 0; -} -. - -define /R write_symbols_file(filename, mem_start, mem_size) - unsigned char *filename; - unsigned char *mem_start; - unsigned long mem_size; -{ - unsigned char *system_table; - unsigned char *debug_info_table_header; - unsigned char *debug_info_table; - unsigned long debug_info_table_size; - unsigned long index; - unsigned char *debug_image_info; - unsigned char *loaded_image_protocol; - unsigned char *image_base; - unsigned char *debug_filename; - unsigned long header_size; - int status; - - system_table = find_system_table(mem_start, mem_size); - if (system_table == 0) - { - return; - } - - status = fopen(88, filename, "w"); - - debug_info_table_header = find_debug_info_table_header(system_table); - - debug_info_table = *(unsigned long *)(debug_info_table_header + 8); - debug_info_table_size = *(unsigned long *)(debug_info_table_header + 4); - - for (index = 0; index < (debug_info_table_size * 4); index += 4) - { - debug_image_info = *(unsigned long *)(debug_info_table + index); - - if (debug_image_info == 0) - { - break; - } - - loaded_image_protocol = *(unsigned long *)(debug_image_info + 4); - - image_base = *(unsigned long *)(loaded_image_protocol + 32); - - debug_filename = pe_filename(image_base); - header_size = pe_headersize(image_base); - - $fprintf 88, "%s 0x%08x\n", debug_filename, image_base + header_size$; - } - - - fclose(88); -} -. - diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc deleted file mode 100755 index b00a1322d4aa..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc +++ /dev/null @@ -1,118 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - -error = continue - -unload - -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 -delfile 1 - -error = abort diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm deleted file mode 100644 index 1bae1727633d..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm +++ /dev/null @@ -1,211 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - - ENTRY &ram_start &ram_size - - ;If system is running then stop the execution so we can load symbols. - break - - ;Reset all windows - WINPAGE.RESET - - ;Create AREA to display the symbols we are loading. - AREA.Reset - AREA.Create SYMBOL 300. 100. - AREA.View SYMBOL - AREA.Select SYMBOL - SYS.Option BE OFF - - ;Added based on suggestion from Lauterbach support. - MMU.TABLEWALK ON - MMU.ON - - ;Load symbols. - GOSUB load_symbols &ram_start &ram_size - - ;Open some windows and enable semihosting. - TOOLBAR ON - STATUSBAR ON - WINPAGE.RESET - - WINCLEAR - WINPOS 0.0 17.0 72. 13. 0. 0. W000 - SYStem - - WINPOS 0.0 0.0 110. 55. 13. 1. W001 - WINTABS 10. 10. 25. 62. - Data.List - - WINPAGE.SELECT P000 - - //Enable semihosting - System.Option.BigEndian OFF - - tronchip.set swi on // ARM9/10/11 variant - - // configure and open semihosting channel - winpos 50% 50% 50% 50% - term.heapinfo 0 0x20000 0x30000 0x20000 - term.method armswi - term.mode string - term.gate - - WINPOS 115.0 0. 70. 35. 0. 1. W002 - Var.Local %HEX - - WINPOS 115.10 45. 48. 9. 0. 0. W003 - Register - - END - -find_system_table: - ENTRY &mem_start &mem_size - &mem_ptr=&mem_start+&mem_size - RPT - ( - &mem_ptr=&mem_ptr-0x400000 // 4 MB - &word1=Data.LONG(D:&mem_ptr) - &word2=Data.LONG(D:&mem_ptr+0x04) - IF &word1==0x20494249 - ( - IF &word2==0x54535953 - ( - &result=Data.LONG(D:&mem_ptr+0x08) - RETURN &result - ) - ) - ) - WHILE &mem_ptr>&mem_start - &result=0 - RETURN &result - -compare_guid: - ENTRY &guid - IF Data.LONG(D:&guid)==0x49152E77 - ( - IF Data.LONG(D:&guid+0x04)==0x47641ADA - ( - IF Data.LONG(D:&guid+0x08)==0xFE7AA2B7 - ( - IF Data.LONG(D:&guid+0x0C)==0x8B5ED9FE - ( - RETURN 0 - ) - ) - ) - ) - RETURN 1 - -find_debug_info_table_header: - ENTRY &system_table - &config_table_entries=Data.LONG(D:&system_table+0x40) - &config_table_pointer=Data.LONG(D:&system_table+0x44) - RPT &config_table_entries - ( - GOSUB compare_guid &config_table_pointer - ENTRY &result - IF &result==0 - ( - &result=Data.LONG(D:&config_table_pointer+0x10) - RETURN &result - ) - &config_table_pointer=&config_table_pointer+0x14 - ) - RETURN 0; - -valid_pe_header: - ENTRY &header - IF Data.BYTE(D:&header+0x00)==0x4D - ( - IF Data.BYTE(D:&header+0x01)==0x5A - ( - IF Data.BYTE(D:&header+0x80)==0x50 - ( - IF Data.BYTE(D:&header+0x81)==0x45 - ( - RETURN 1 - ) - ) - ) - ) - RETURN 0 - -get_file_string: - ENTRY &stringOffset - - local &string - - &more_string=data.string(d:&stringOffset) - - if (string.len("&more_string")>=128.) - ( - &string="&string"+"&more_string" - &stringOffset=&stringOffset+string.len("&more_string") - - //Get remaining file string - GOSUB get_file_string &stringOffset - ENTRY &more_string - &string="&string"+"&more_string" - ) - else - ( - &string="&string"+"&more_string" - &more_string="" - ) - RETURN &string - -load_symbol_file: - ENTRY &header &load_address - GOSUB valid_pe_header &header - ENTRY &result - - IF &result==1 - ( - &debugOffset=Data.LONG(D:&header+0x0128) - &stringOffset=&header+&debugOffset+0x002C - - GOSUB get_file_string &stringOffset - ENTRY &filestring - - PRINT "&filestring 0x" &load_address - TDIAG Data.load.elf &filestring &load_address /nocode /noclear - ) - RETURN - -pe_headersize: - ENTRY &header; - RETURN Data.LONG(D:&header+0x00AC) - -load_symbols: - ENTRY &mem_start &mem_size - GOSUB find_system_table &mem_start &mem_size - ENTRY &system_table - GOSUB find_debug_info_table_header &system_table - ENTRY &debug_info_table_header - &debug_info_table=Data.LONG(D:&debug_info_table_header+0x08) - &debug_info_table_size=Data.LONG(D:&debug_info_table_header+0x04) - &index=0 - RPT &debug_info_table_size - ( - &debug_image_info=Data.LONG(D:&debug_info_table+&index) - IF &debug_image_info==0 - RETURN - &loaded_image_protocol=Data.LONG(D:&debug_image_info+0x04); - &image_base=Data.LONG(D:&loaded_image_protocol+0x20); - GOSUB pe_headersize &image_base - ENTRY &header_size - &image_load_address=&image_base+&header_size - GOSUB load_symbol_file &image_base &image_load_address - &index=&index+0x4 - ) - - RETURN diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm deleted file mode 100644 index db9ff4e966a3..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm +++ /dev/null @@ -1,188 +0,0 @@ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - - ENTRY &ram_start &ram_size - - ;If system is running then stop the execution so we can load symbols. - break - - ;Reset all windows - WINPAGE.RESET - - AREA.Reset - AREA.Create SYMBOL 300. 100. - AREA.View SYMBOL - AREA.Select SYMBOL - SYS.Option BE OFF - - ; Added based on suggestion from Lauterbach support. - MMU.TABLEWALK ON - MMU.ON - - GOSUB load_symbols &ram_start &ram_size - - ;Open some windows. - WINPOS 83.125 29.063 48. 9. 0. 0. W003 - Register - - WINPOS 83.25 10. 48. 9. 0. 1. W002 - Var.Local - - END - -find_system_table: - ENTRY &mem_start &mem_size - &mem_ptr=&mem_start+&mem_size - RPT - ( - &mem_ptr=&mem_ptr-0x400000 // 4 MB - &word1=Data.LONG(D:&mem_ptr) - &word2=Data.LONG(D:&mem_ptr+0x04) - IF &word1==0x20494249 - ( - IF &word2==0x54535953 - ( - &result=Data.LONG(D:&mem_ptr+0x08) - RETURN &result - ) - ) - ) - WHILE &mem_ptr>&mem_start - &result=0 - RETURN &result - -compare_guid: - ENTRY &guid - IF Data.LONG(D:&guid)==0x49152E77 - ( - IF Data.LONG(D:&guid+0x04)==0x47641ADA - ( - IF Data.LONG(D:&guid+0x08)==0xFE7AA2B7 - ( - IF Data.LONG(D:&guid+0x0C)==0x8B5ED9FE - ( - RETURN 0 - ) - ) - ) - ) - RETURN 1 - -find_debug_info_table_header: - ENTRY &system_table - &config_table_entries=Data.LONG(D:&system_table+0x40) - &config_table_pointer=Data.LONG(D:&system_table+0x44) - RPT &config_table_entries - ( - GOSUB compare_guid &config_table_pointer - ENTRY &result - IF &result==0 - ( - &result=Data.LONG(D:&config_table_pointer+0x10) - RETURN &result - ) - &config_table_pointer=&config_table_pointer+0x14 - ) - RETURN 0; - -valid_pe_header: - ENTRY &header - IF Data.BYTE(D:&header+0x00)==0x4D - ( - IF Data.BYTE(D:&header+0x01)==0x5A - ( - IF Data.BYTE(D:&header+0x80)==0x50 - ( - IF Data.BYTE(D:&header+0x81)==0x45 - ( - RETURN 1 - ) - ) - ) - ) - RETURN 0 - -get_file_string: - ENTRY &stringOffset - - local &string - - &more_string=data.string(d:&stringOffset) - - if (string.len("&more_string")>=128.) - ( - &string="&string"+"&more_string" - &stringOffset=&stringOffset+string.len("&more_string") - - //Get remaining file string - GOSUB get_file_string &stringOffset - ENTRY &more_string - &string="&string"+"&more_string" - ) - else - ( - &string="&string"+"&more_string" - &more_string="" - ) - RETURN &string - -load_symbol_file: - ENTRY &header &load_address - GOSUB valid_pe_header &header - ENTRY &result - - IF &result==1 - ( - &debugOffset=Data.LONG(D:&header+0x0128) - &stringOffset=&header+&debugOffset+0x002C - - &stringOffset=&stringOffset+11. - - GOSUB get_file_string &stringOffset - ENTRY &filestring - - &filestring="c:"+"&filestring" - - PRINT "&filestring 0x" &load_address - Data.load.elf &filestring &load_address /nocode /noclear - ) - RETURN - -pe_headersize: - ENTRY &header; - RETURN Data.LONG(D:&header+0x00AC) - -load_symbols: - ENTRY &mem_start &mem_size - GOSUB find_system_table &mem_start &mem_size - ENTRY &system_table - GOSUB find_debug_info_table_header &system_table - ENTRY &debug_info_table_header - &debug_info_table=Data.LONG(D:&debug_info_table_header+0x08) - &debug_info_table_size=Data.LONG(D:&debug_info_table_header+0x04) - &index=0 - RPT &debug_info_table_size - ( - &debug_image_info=Data.LONG(D:&debug_info_table+&index) - IF &debug_image_info==0 - RETURN - &loaded_image_protocol=Data.LONG(D:&debug_image_info+0x04); - &image_base=Data.LONG(D:&loaded_image_protocol+0x20); - GOSUB pe_headersize &image_base - ENTRY &header_size - &image_load_address=&image_base+&header_size - GOSUB load_symbol_file &image_base &image_load_address - &index=&index+0x4 - ) - - RETURN - \ No newline at end of file diff --git a/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h b/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h deleted file mode 100755 index f9955b03752e..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h +++ /dev/null @@ -1,179 +0,0 @@ -/** @file -* Header defining the BeagleBoard constants (Base addresses, sizes, flags) -* -* Copyright (c) 2011, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#ifndef __BEAGLEBOARD_PLATFORM_H__ -#define __BEAGLEBOARD_PLATFORM_H__ - -// DDR attributes -#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK -#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED - -// SoC registers. L3 interconnects -#define SOC_REGISTERS_L3_PHYSICAL_BASE 0x68000000 -#define SOC_REGISTERS_L3_PHYSICAL_LENGTH 0x08000000 -#define SOC_REGISTERS_L3_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE - -// SoC registers. L4 interconnects -#define SOC_REGISTERS_L4_PHYSICAL_BASE 0x48000000 -#define SOC_REGISTERS_L4_PHYSICAL_LENGTH 0x08000000 -#define SOC_REGISTERS_L4_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE - - -#if 0 -/******************************************* -// Platform Memory Map -*******************************************/ - -// Can be NOR, DOC, DRAM, SRAM -#define ARM_EB_REMAP_BASE 0x00000000 -#define ARM_EB_REMAP_SZ 0x04000000 - -// Motherboard Peripheral and On-chip peripheral -#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_BASE 0x10000000 -#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_SZ 0x00100000 -#define ARM_EB_BOARD_PERIPH_BASE 0x10000000 -//#define ARM_EB_CHIP_PERIPH_BASE 0x10020000 - -// SMC -#define ARM_EB_SMC_BASE 0x40000000 -#define ARM_EB_SMC_SZ 0x20000000 - -// NOR Flash 1 -#define ARM_EB_SMB_NOR_BASE 0x40000000 -#define ARM_EB_SMB_NOR_SZ 0x04000000 /* 64 MB */ -// DOC Flash -#define ARM_EB_SMB_DOC_BASE 0x44000000 -#define ARM_EB_SMB_DOC_SZ 0x04000000 /* 64 MB */ -// SRAM -#define ARM_EB_SMB_SRAM_BASE 0x48000000 -#define ARM_EB_SMB_SRAM_SZ 0x02000000 /* 32 MB */ -// USB, Ethernet, VRAM -#define ARM_EB_SMB_PERIPH_BASE 0x4E000000 -//#define ARM_EB_SMB_PERIPH_VRAM 0x4C000000 -#define ARM_EB_SMB_PERIPH_SZ 0x02000000 /* 32 MB */ - -// DRAM -#define ARM_EB_DRAM_BASE 0x70000000 -#define ARM_EB_DRAM_SZ 0x10000000 - -// Logic Tile -#define ARM_EB_LOGIC_TILE_BASE 0xC0000000 -#define ARM_EB_LOGIC_TILE_SZ 0x40000000 - -/******************************************* -// Motherboard peripherals -*******************************************/ - -// Define MotherBoard SYS flags offsets (from ARM_EB_BOARD_PERIPH_BASE) -#define ARM_EB_SYS_FLAGS_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030) -#define ARM_EB_SYS_FLAGS_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030) -#define ARM_EB_SYS_FLAGS_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00034) -#define ARM_EB_SYS_FLAGS_NV_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038) -#define ARM_EB_SYS_FLAGS_NV_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038) -#define ARM_EB_SYS_FLAGS_NV_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x0003C) -#define ARM_EB_SYS_CLCD (ARM_EB_BOARD_PERIPH_BASE + 0x00050) -#define ARM_EB_SYS_PROCID0_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00084) -#define ARM_EB_SYS_PROCID1_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00088) -#define ARM_EB_SYS_CFGDATA_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A0) -#define ARM_EB_SYS_CFGCTRL_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A4) -#define ARM_EB_SYS_CFGSTAT_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A8) - -// SP810 Controller -#define SP810_CTRL_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x01000) - -// SYSTRCL Register -#define ARM_EB_SYSCTRL 0x10001000 - -// Uart0 -#define PL011_CONSOLE_UART_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x09000) -#define PL011_CONSOLE_UART_SPEED 115200 - -// SP804 Timer Bases -#define SP804_TIMER0_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11000) -#define SP804_TIMER1_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11020) -#define SP804_TIMER2_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12000) -#define SP804_TIMER3_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12020) - -// PL301 RTC -#define PL031_RTC_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x17000) - -// Dynamic Memory Controller Base -#define ARM_EB_DMC_BASE 0x10018000 - -// Static Memory Controller Base -#define ARM_EB_SMC_CTRL_BASE 0x10080000 - -#define PL111_CLCD_BASE 0x10020000 -//TODO: FIXME ... Reserved the memory in UEFI !!! Otherwise risk of corruption -#define PL111_CLCD_VRAM_BASE 0x78000000 - -#define ARM_EB_SYS_OSCCLK4 0x1000001C - - -/*// System Configuration Controller register Base addresses -//#define ARM_EB_SYS_CFG_CTRL_BASE 0x100E2000 -#define ARM_EB_SYS_CFGRW0_REG 0x100E2000 -#define ARM_EB_SYS_CFGRW1_REG 0x100E2004 -#define ARM_EB_SYS_CFGRW2_REG 0x100E2008 - -#define ARM_EB_CFGRW1_REMAP_NOR0 0 -#define ARM_EB_CFGRW1_REMAP_NOR1 (1 << 28) -#define ARM_EB_CFGRW1_REMAP_EXT_AXI (1 << 29) -#define ARM_EB_CFGRW1_REMAP_DRAM (1 << 30) - -// PL301 Fast AXI Base Address -#define ARM_EB_FAXI_BASE 0x100E9000 - -// L2x0 Cache Controller Base Address -//#define ARM_EB_L2x0_CTLR_BASE 0x1E00A000*/ - - -// PL031 RTC - Other settings -#define PL031_PPM_ACCURACY 300000000 - -/******************************************* -// Interrupt Map -*******************************************/ - -// Timer Interrupts -#define TIMER01_INTERRUPT_NUM 34 -#define TIMER23_INTERRUPT_NUM 35 - - -/******************************************* -// EFI Memory Map in Permanent Memory (DRAM) -*******************************************/ - -// This region is allocated at the bottom of the DRAM. It will be used -// for fixed address allocations such as Vector Table -#define ARM_EB_EFI_FIX_ADDRESS_REGION_SZ SIZE_8MB - -// This region is the memory declared to PEI as permanent memory for PEI -// and DXE. EFI stacks and heaps will be declared in this region. -#define ARM_EB_EFI_MEMORY_REGION_SZ 0x1000000 -#endif - -typedef enum { - REVISION_XM, - REVISION_UNKNOWN0, - REVISION_UNKNOWN1, - REVISION_UNKNOWN2, - REVISION_UNKNOWN3, - REVISION_C4, - REVISION_C123, - REVISION_AB, -} BEAGLEBOARD_REVISION; - -#endif diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c deleted file mode 100755 index 3b0244004853..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c +++ /dev/null @@ -1,135 +0,0 @@ -/** @file -* -* Copyright (c) 2011-2012, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#include -#include -#include -#include - -#include -#include - -VOID -PadConfiguration ( - BEAGLEBOARD_REVISION Revision - ); - -VOID -ClockInit ( - VOID - ); - -/** - Detect board revision - - @return Board revision -**/ -BEAGLEBOARD_REVISION -BeagleBoardGetRevision ( - VOID - ) -{ - UINT32 OldPinDir; - UINT32 Revision; - - // Read GPIO 171, 172, 173 - OldPinDir = MmioRead32 (GPIO6_BASE + GPIO_OE); - MmioWrite32(GPIO6_BASE + GPIO_OE, (OldPinDir | BIT11 | BIT12 | BIT13)); - Revision = MmioRead32 (GPIO6_BASE + GPIO_DATAIN); - - // Restore I/O settings - MmioWrite32 (GPIO6_BASE + GPIO_OE, OldPinDir); - - return (BEAGLEBOARD_REVISION)((Revision >> 11) & 0x7); -} - -/** - Return the current Boot Mode - - This function returns the boot reason on the platform - -**/ -EFI_BOOT_MODE -ArmPlatformGetBootMode ( - VOID - ) -{ - return BOOT_WITH_FULL_CONFIGURATION; -} - -/** - Initialize controllers that must setup at the early stage - - Some peripherals must be initialized in Secure World. - For example, some L2x0 requires to be initialized in Secure World - -**/ -RETURN_STATUS -ArmPlatformInitialize ( - IN UINTN MpId - ) -{ - BEAGLEBOARD_REVISION Revision; - - Revision = BeagleBoardGetRevision(); - - // Set up Pin muxing. - PadConfiguration (Revision); - - // Set up system clocking - ClockInit (); - - // Turn off the functional clock for Timer 3 - MmioAnd32 (CM_FCLKEN_PER, 0xFFFFFFFF ^ CM_ICLKEN_PER_EN_GPT3_ENABLE ); - ArmDataSynchronizationBarrier (); - - // Clear IRQs - MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR); - ArmDataSynchronizationBarrier (); - - return RETURN_SUCCESS; -} - -/** - Initialize the system (or sometimes called permanent) memory - - This memory is generally represented by the DRAM. - -**/ -VOID -ArmPlatformInitializeSystemMemory ( - VOID - ) -{ - // We do not need to initialize the System Memory on RTSM -} - -VOID -ArmPlatformGetPlatformPpiList ( - OUT UINTN *PpiListSize, - OUT EFI_PEI_PPI_DESCRIPTOR **PpiList - ) -{ - *PpiListSize = 0; - *PpiList = NULL; -} - -UINTN -ArmPlatformGetCorePosition ( - IN UINTN MpId - ) -{ - return 1; -} - diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S deleted file mode 100644 index 958f0029935c..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S +++ /dev/null @@ -1,37 +0,0 @@ -# -# Copyright (c) 2012-2013, ARM Limited. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# - -#include - -//UINTN -//ArmPlatformIsPrimaryCore ( -// IN UINTN MpId -// ); -ASM_FUNC(ArmPlatformIsPrimaryCore) - // BeagleBoard has a single core. We must always return 1. - mov r0, #1 - bx lr - -ASM_FUNC(ArmPlatformPeiBootAction) - bx lr - -//UINTN -//ArmPlatformGetPrimaryCoreMpId ( -// VOID -// ); -ASM_FUNC(ArmPlatformGetPrimaryCoreMpId) - // The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is - // always the MPIDR of the calling CPU. - b ASM_PFX(ArmReadMpidr) - -ASM_FUNCTION_REMOVE_IF_UNREFERENCED diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm deleted file mode 100644 index 20fa83f133e9..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm +++ /dev/null @@ -1,48 +0,0 @@ -// -// Copyright (c) 2012-2013, ARM Limited. All rights reserved. -// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// -// - - INCLUDE AsmMacroIoLib.inc - - EXPORT ArmPlatformPeiBootAction - EXPORT ArmPlatformIsPrimaryCore - EXPORT ArmPlatformGetPrimaryCoreMpId - - IMPORT ArmReadMpidr - - AREA BeagleBoardHelper, CODE, READONLY - -//UINTN -//ArmPlatformIsPrimaryCore ( -// IN UINTN MpId -// ); -ArmPlatformIsPrimaryCore FUNCTION - // BeagleBoard has a single core. We must always return 1. - mov r0, #1 - bx lr - ENDFUNC - -ArmPlatformPeiBootAction FUNCTION - bx lr - ENDFUNC - -//UINTN -//ArmPlatformGetPrimaryCoreMpId ( -// VOID -// ); -ArmPlatformGetPrimaryCoreMpId FUNCTION - // The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is - // always the MPIDR of the calling CPU. - b ArmReadMpidr - ENDFUNC - - END diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf deleted file mode 100755 index b6c76a196ea6..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf +++ /dev/null @@ -1,54 +0,0 @@ -#/* @file -# Copyright (c) 2011-2013, ARM Limited. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#*/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardLib - FILE_GUID = 736343a0-1d96-11e0-aaaa-0002a5d5c51b - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = ArmPlatformLib - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - ArmPlatformPkg/ArmPlatformPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec - -[LibraryClasses] - IoLib - ArmLib - MemoryAllocationLib - -[Sources.common] - BeagleBoardHelper.asm | RVCT - BeagleBoardHelper.S | GCC - BeagleBoard.c - BeagleBoardMem.c - PadConfiguration.c - Clock.c - BeagleBoardHelper.S | GCC - BeagleBoardHelper.asm | RVCT - -[FeaturePcd] - gEmbeddedTokenSpaceGuid.PcdCacheEnable - -[FixedPcd] - gArmTokenSpaceGuid.PcdFdBaseAddress - gArmTokenSpaceGuid.PcdFdSize - - gArmTokenSpaceGuid.PcdSystemMemoryBase - gArmTokenSpaceGuid.PcdSystemMemorySize diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c deleted file mode 100755 index b77b06993061..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c +++ /dev/null @@ -1,84 +0,0 @@ -/** @file -* -* Copyright (c) 2011, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#include -#include -#include -#include -#include - -#include - -#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 4 - -/** - Return the Virtual Memory Map of your platform - - This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU on your platform. - - @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to- - Virtual Memory mapping. This array must be ended by a zero-filled - entry - -**/ -VOID -ArmPlatformGetVirtualMemoryMap ( - IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap - ) -{ - ARM_MEMORY_REGION_ATTRIBUTES CacheAttributes; - UINTN Index = 0; - ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable; - - ASSERT(VirtualMemoryMap != NULL); - - VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)AllocatePages(EFI_SIZE_TO_PAGES (sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS)); - if (VirtualMemoryTable == NULL) { - return; - } - - if (FeaturePcdGet(PcdCacheEnable) == TRUE) { - CacheAttributes = DDR_ATTRIBUTES_CACHED; - } else { - CacheAttributes = DDR_ATTRIBUTES_UNCACHED; - } - - // ReMap (Either NOR Flash or DRAM) - VirtualMemoryTable[Index].PhysicalBase = PcdGet64 (PcdSystemMemoryBase); - VirtualMemoryTable[Index].VirtualBase = PcdGet64 (PcdSystemMemoryBase); - VirtualMemoryTable[Index].Length = PcdGet64 (PcdSystemMemorySize); - VirtualMemoryTable[Index].Attributes = CacheAttributes; - - // SOC Registers. L3 interconnects - VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE; - VirtualMemoryTable[Index].VirtualBase = SOC_REGISTERS_L3_PHYSICAL_BASE; - VirtualMemoryTable[Index].Length = SOC_REGISTERS_L3_PHYSICAL_LENGTH; - VirtualMemoryTable[Index].Attributes = SOC_REGISTERS_L3_ATTRIBUTES; - - // SOC Registers. L4 interconnects - VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE; - VirtualMemoryTable[Index].VirtualBase = SOC_REGISTERS_L4_PHYSICAL_BASE; - VirtualMemoryTable[Index].Length = SOC_REGISTERS_L4_PHYSICAL_LENGTH; - VirtualMemoryTable[Index].Attributes = SOC_REGISTERS_L4_ATTRIBUTES; - - // End of Table - VirtualMemoryTable[++Index].PhysicalBase = 0; - VirtualMemoryTable[Index].VirtualBase = 0; - VirtualMemoryTable[Index].Length = 0; - VirtualMemoryTable[Index].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0; - - ASSERT((Index + 1) == MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS); - - *VirtualMemoryMap = VirtualMemoryTable; -} diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c deleted file mode 100755 index 6ca48e0c9fcb..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c +++ /dev/null @@ -1,69 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include - -#include - -VOID -ClockInit ( - VOID - ) -{ - //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses. - - // Enable PLL5 and set to 120 MHz as a reference clock. - MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13)); - MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1)); - MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE); - - // Turn on functional & interface clocks to the USBHOST power domain - MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE - | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE); - MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE); - - // Turn on functional & interface clocks to the USBTLL block. - MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE); - MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE); - - // Turn on functional & interface clocks to MMC1 and I2C1 modules. - MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE - | CM_FCLKEN1_CORE_EN_I2C1_ENABLE); - MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE - | CM_ICLKEN1_CORE_EN_I2C1_ENABLE); - - // Turn on functional & interface clocks to various Peripherals. - MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE - | CM_FCLKEN_PER_EN_GPT4_ENABLE - | CM_FCLKEN_PER_EN_GPIO2_ENABLE - | CM_FCLKEN_PER_EN_GPIO3_ENABLE - | CM_FCLKEN_PER_EN_GPIO4_ENABLE - | CM_FCLKEN_PER_EN_GPIO5_ENABLE - | CM_FCLKEN_PER_EN_GPIO6_ENABLE); - MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE - | CM_ICLKEN_PER_EN_GPT3_ENABLE - | CM_ICLKEN_PER_EN_GPT4_ENABLE - | CM_ICLKEN_PER_EN_GPIO2_ENABLE - | CM_ICLKEN_PER_EN_GPIO3_ENABLE - | CM_ICLKEN_PER_EN_GPIO4_ENABLE - | CM_ICLKEN_PER_EN_GPIO5_ENABLE - | CM_ICLKEN_PER_EN_GPIO6_ENABLE); - - // Turn on functional & inteface clocks to various wakeup modules. - MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE - | CM_FCLKEN_WKUP_EN_WDT2_ENABLE); - MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE - | CM_ICLKEN_WKUP_EN_WDT2_ENABLE); -} diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c deleted file mode 100755 index e6f7cc55ff00..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c +++ /dev/null @@ -1,322 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include - -#define NUM_PINS_SHARED 232 -#define NUM_PINS_ABC 6 -#define NUM_PINS_XM 12 - -PAD_CONFIGURATION PadConfigurationTableShared[] = { - //Pin, MuxMode, PullConfig, InputEnable - { SDRC_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D12, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D13, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D14, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D15, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D16, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D17, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D18, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D19, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D20, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D21, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D22, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D23, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D24, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D25, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D26, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D27, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D28, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D29, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D30, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D31, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_CLK, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS0, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_CKE0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { SDRC_CKE1, MUXMODE7, PULL_DISABLED, INPUT }, - { SDRC_DQS1, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS2, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS3, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_A1, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A2, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A3, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A4, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A6, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A7, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A8, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A9, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A10, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D12, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D13, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D14, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D15, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NCS0, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NCS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS2, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS3, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS4, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NCS6, MUXMODE1, PULL_DISABLED, INPUT }, - { GPMC_NCS7, MUXMODE1, PULL_UP_SELECTED, INPUT }, - { GPMC_CLK, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NADV_ALE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NOE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NWE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NBE0_CLE, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NBE1, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NWP, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_WAIT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { DSS_PCLK, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_HSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_PSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_ACBIAS, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA0, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA1, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA2, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA3, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA4, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA6, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA7, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA8, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA9, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA10, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA11, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA12, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA13, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA14, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA15, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA16, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA17, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_HS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_VS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_XCLKA, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_PCLK, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_FLD, MUXMODE4, PULL_DISABLED, OUTPUT }, - { CAM_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_XCLKB, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_WEN, MUXMODE4, PULL_DISABLED, INPUT }, - { CAM_STROBE, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CSI2_DX0, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DY0, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DX1, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DY1, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_FSX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_CLKX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_DR, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_DX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { MMC1_CLK, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { MMC1_CMD, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT4, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT5, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT6, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT7, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC2_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_CMD, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT0, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT1, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT3, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT4, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT5, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT6, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT7, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCBSP3_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART2_CTS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { UART2_RTS, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART2_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART2_RX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART1_RTS, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_CTS, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_RX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP4_CLKX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_DR, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_DX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_FSX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP1_CLKR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_FSR, MUXMODE4, PULL_UP_SELECTED, OUTPUT }, - { MCBSP1_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_CLKS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MCBSP1_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART3_CTS_RCTX,MUXMODE0, PULL_UP_SELECTED, INPUT }, - { UART3_RTS_SD, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART3_RX_IRRX, MUXMODE0, PULL_DISABLED, INPUT }, - { UART3_TX_IRTX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { HSUSB0_CLK, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_STP, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { HSUSB0_DIR, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_NXT, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA0, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA1, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA2, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA3, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA4, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA5, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA6, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA7, MUXMODE0, PULL_DISABLED, INPUT }, - { I2C1_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C1_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C2_SCL, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { I2C2_SDA, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { I2C3_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C3_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { HDQ_SIO, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCSPI1_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCSPI1_SIMO, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCSPI1_SOMI, MUXMODE0, PULL_DISABLED, INPUT }, - { MCSPI1_CS0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MCSPI1_CS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { MCSPI1_CS2, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCSPI1_CS3, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CLK, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_SIMO, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_SOMI, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CS0, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CS1, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { SYS_NIRQ, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { SYS_CLKOUT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { ETK_CLK, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_CTL, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D0, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D1, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D2, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D3, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D4, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D5, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D6, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D7, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D8, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D9, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { ETK_D10, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D11, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D12, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D13, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D14, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D15, MUXMODE3, PULL_UP_SELECTED, INPUT } -}; - -PAD_CONFIGURATION PadConfigurationTableAbc[] = { - { DSS_DATA18, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA19, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA20, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA21, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA22, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA23, MUXMODE0, PULL_DISABLED, OUTPUT } -}; - -PAD_CONFIGURATION PadConfigurationTableXm[] = { - { DSS_DATA18, MUXMODE3, PULL_DISABLED, OUTPUT }, - { DSS_DATA19, MUXMODE3, PULL_DISABLED, OUTPUT }, - { DSS_DATA20, MUXMODE3, PULL_DISABLED, OUTPUT }, - { DSS_DATA21, MUXMODE3, PULL_DISABLED, OUTPUT }, - { DSS_DATA22, MUXMODE3, PULL_DISABLED, OUTPUT }, - { DSS_DATA23, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT0, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT1, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT3, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT4, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT5, MUXMODE3, PULL_DISABLED, OUTPUT }, - { SYS_BOOT6, MUXMODE3, PULL_DISABLED, OUTPUT } -}; - -VOID -PadConfiguration ( - BEAGLEBOARD_REVISION Revision - ) -{ - UINTN Index; - UINT16 PadConfiguration; - PAD_CONFIGURATION *BoardConfiguration; - UINTN NumPinsToConfigure; - - for (Index = 0; Index < NUM_PINS_SHARED; Index++) { - // Set up Pad configuration for particular pin. - PadConfiguration = (PadConfigurationTableShared[Index].MuxMode << MUXMODE_OFFSET); - PadConfiguration |= (PadConfigurationTableShared[Index].PullConfig << PULL_CONFIG_OFFSET); - PadConfiguration |= (PadConfigurationTableShared[Index].InputEnable << INPUTENABLE_OFFSET); - - // Configure the pin with specific Pad configuration. - MmioWrite16(PadConfigurationTableShared[Index].Pin, PadConfiguration); - } - - if (Revision == REVISION_XM) { - BoardConfiguration = PadConfigurationTableXm; - NumPinsToConfigure = NUM_PINS_XM; - } else { - BoardConfiguration = PadConfigurationTableAbc; - NumPinsToConfigure = NUM_PINS_ABC; - } - - for (Index = 0; Index < NumPinsToConfigure; Index++) { - //Set up Pad configuration for particular pin. - PadConfiguration = (BoardConfiguration[Index].MuxMode << MUXMODE_OFFSET); - PadConfiguration |= (BoardConfiguration[Index].PullConfig << PULL_CONFIG_OFFSET); - PadConfiguration |= (BoardConfiguration[Index].InputEnable << INPUTENABLE_OFFSET); - - //Configure the pin with specific Pad configuration. - MmioWrite16(BoardConfiguration[Index].Pin, PadConfiguration); - } -} diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c deleted file mode 100644 index 46204a4386b6..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c +++ /dev/null @@ -1,299 +0,0 @@ -/** @file - Add custom commands for BeagleBoard development. - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -/** - Simple arm disassembler via a library - - Argv[0] - symboltable - Argv[1] - Optional quoted format string - Argv[2] - Optional flag - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblSymbolTable ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - EFI_STATUS Status; - EFI_DEBUG_IMAGE_INFO_TABLE_HEADER *DebugImageTableHeader = NULL; - EFI_DEBUG_IMAGE_INFO *DebugTable; - UINTN Entry; - CHAR8 *Format; - CHAR8 *Pdb; - UINT32 PeCoffSizeOfHeaders; - UINT32 ImageBase; - BOOLEAN Elf; - - // Need to add lots of error checking on the passed in string - // Default string is for RealView debugger or gdb depending on toolchain used. - if (Argc > 1) { - Format = Argv[1]; - } else { -#if __GNUC__ - // Assume gdb - Format = "add-symbol-file %a 0x%x"; -#else - // Default to RVCT - Format = "load /a /ni /np %a &0x%x"; -#endif - } - Elf = (Argc > 2) ? FALSE : TRUE; - - Status = EfiGetSystemConfigurationTable (&gEfiDebugImageInfoTableGuid, (VOID **)&DebugImageTableHeader); - if (EFI_ERROR (Status)) { - return Status; - } - - DebugTable = DebugImageTableHeader->EfiDebugImageInfoTable; - if (DebugTable == NULL) { - return EFI_SUCCESS; - } - - for (Entry = 0; Entry < DebugImageTableHeader->TableSize; Entry++, DebugTable++) { - if (DebugTable->NormalImage != NULL) { - if ((DebugTable->NormalImage->ImageInfoType == EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL) && (DebugTable->NormalImage->LoadedImageProtocolInstance != NULL)) { - ImageBase = (UINT32)DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase; - PeCoffSizeOfHeaders = PeCoffGetSizeOfHeaders ((VOID *)(UINTN)ImageBase); - Pdb = PeCoffLoaderGetPdbPointer (DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase); - if (Pdb != NULL) { - if (Elf) { - // ELF and Mach-O images don't include the header so the linked address does not include header - ImageBase += PeCoffSizeOfHeaders; - } - AsciiPrint (Format, Pdb, ImageBase); - AsciiPrint ("\n"); - } else { - } - } - } - } - - return EFI_SUCCESS; -} - - -/** - Simple arm disassembler via a library - - Argv[0] - disasm - Argv[1] - Address to start disassembling from - ARgv[2] - Number of instructions to disassembly (optional) - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblDisassembler ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - UINT8 *Ptr, *CurrentAddress; - UINT32 Address; - UINT32 Count; - CHAR8 Buffer[80]; - UINT32 ItBlock; - - if (Argc < 2) { - return EFI_INVALID_PARAMETER; - } - - Address = AsciiStrHexToUintn (Argv[1]); - Count = (Argc > 2) ? (UINT32)AsciiStrHexToUintn (Argv[2]) : 20; - - Ptr = (UINT8 *)(UINTN)Address; - ItBlock = 0; - do { - CurrentAddress = Ptr; - DisassembleInstruction (&Ptr, TRUE, TRUE, &ItBlock, Buffer, sizeof (Buffer)); - AsciiPrint ("0x%08x: %a\n", CurrentAddress, Buffer); - } while (Count-- > 0); - - - return EFI_SUCCESS; -} - - -CHAR8 * -ImageHandleToPdbFileName ( - IN EFI_HANDLE Handle - ) -{ - EFI_STATUS Status; - EFI_LOADED_IMAGE_PROTOCOL *LoadedImage; - CHAR8 *Pdb; - CHAR8 *StripLeading; - - Status = gBS->HandleProtocol (Handle, &gEfiLoadedImageProtocolGuid, (VOID **)&LoadedImage); - if (EFI_ERROR (Status)) { - return ""; - } - - Pdb = PeCoffLoaderGetPdbPointer (LoadedImage->ImageBase); - StripLeading = AsciiStrStr (Pdb, "\\ARM\\"); - if (StripLeading == NULL) { - StripLeading = AsciiStrStr (Pdb, "/ARM/"); - if (StripLeading == NULL) { - return Pdb; - } - } - // Hopefully we hacked off the unneeded part - return (StripLeading + 5); -} - - -CHAR8 *mTokenList[] = { - "SEC", - "PEI", - "DXE", - "BDS", - NULL -}; - -/** - Simple arm disassembler via a library - - Argv[0] - disasm - Argv[1] - Address to start disassembling from - ARgv[2] - Number of instructions to disassembly (optional) - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblPerformance ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - UINTN Key; - CONST VOID *Handle; - CONST CHAR8 *Token, *Module; - UINT64 Start, Stop, TimeStamp; - UINT64 Delta, TicksPerSecond, Milliseconds, Microseconds; - UINTN Index; - - TicksPerSecond = GetPerformanceCounterProperties (NULL, NULL); - - Key = 0; - do { - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); - if (Key != 0) { - if (AsciiStriCmp ("StartImage:", Token) == 0) { - if (Stop == 0) { - // The entry for EBL is still running so the stop time will be zero. Skip it - AsciiPrint (" running %a\n", ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); - } else { - Delta = Stop - Start; - Microseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000000), TicksPerSecond, NULL); - AsciiPrint ("%10ld us %a\n", Microseconds, ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); - } - } - } - } while (Key != 0); - - AsciiPrint ("\n"); - - TimeStamp = 0; - Key = 0; - do { - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); - if (Key != 0) { - for (Index = 0; mTokenList[Index] != NULL; Index++) { - if (AsciiStriCmp (mTokenList[Index], Token) == 0) { - Delta = Stop - Start; - TimeStamp += Delta; - Milliseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000), TicksPerSecond, NULL); - AsciiPrint ("%6a %6ld ms\n", Token, Milliseconds); - break; - } - } - } - } while (Key != 0); - - AsciiPrint ("Total Time = %ld ms\n\n", DivU64x64Remainder (MultU64x32 (TimeStamp, 1000), TicksPerSecond, NULL)); - - return EFI_SUCCESS; -} - - -GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] = -{ - { - "disasm address [count]", - " disassemble count instructions", - NULL, - EblDisassembler - }, - { - "performance", - " Display boot performance info", - NULL, - EblPerformance - }, - { - "symboltable [\"format string\"] [PECOFF]", - " show symbol table commands for debugger", - NULL, - EblSymbolTable - } -}; - - -VOID -EblInitializeExternalCmd ( - VOID - ) -{ - EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE)); - return; -} diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf deleted file mode 100644 index a79448c0e95b..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf +++ /dev/null @@ -1,53 +0,0 @@ -#/** @file -# Component description file for the entry point to a EFIDXE Drivers -# -# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification -# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardEblCmdLib - FILE_GUID = ea62bdc3-1063-425f-8851-98cb47f213a8 - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER - - -# -# The following information is for reference only and not required by the build tools. -# -# VALID_ARCHITECTURES = IA32 X64 IPF EBC -# - -[Sources.common] - EblCmdLib.c - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - -[LibraryClasses] - BaseLib - DebugLib - ArmDisassemblerLib - PerformanceLib - TimerLib - -[Protocols] - gEfiDebugSupportProtocolGuid - gEfiLoadedImageProtocolGuid - -[Guids] - gEfiDebugImageInfoTableGuid diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c deleted file mode 100644 index 82a2957dc97e..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c +++ /dev/null @@ -1,103 +0,0 @@ -/** @file - Basic serial IO abstaction for GDB - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include -#include -#include -#include -#include - -RETURN_STATUS -EFIAPI -GdbSerialLibConstructor ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - return RETURN_SUCCESS; -} - -RETURN_STATUS -EFIAPI -GdbSerialInit ( - IN UINT64 BaudRate, - IN UINT8 Parity, - IN UINT8 DataBits, - IN UINT8 StopBits - ) -{ - return RETURN_SUCCESS; -} - -BOOLEAN -EFIAPI -GdbIsCharAvailable ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - - if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { - return TRUE; - } else { - return FALSE; - } -} - -CHAR8 -EFIAPI -GdbGetChar ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; - CHAR8 Char; - - while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); - Char = MmioRead8(RBR); - - return Char; -} - -VOID -EFIAPI -GdbPutChar ( - IN CHAR8 Char - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; - - while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); - MmioWrite8(THR, Char); -} - -VOID -GdbPutString ( - IN CHAR8 *String - ) -{ - while (*String != '\0') { - GdbPutChar (*String); - String++; - } -} - - - - diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf deleted file mode 100644 index e219ea256f26..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf +++ /dev/null @@ -1,41 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = GdbSerialLib - FILE_GUID = E2423349-EF5D-439B-95F5-8B8D8E3B443F - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = GdbSerialLib - - CONSTRUCTOR = GdbSerialLibConstructor - - -[Sources.common] - GdbSerialLib.c - - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[LibraryClasses] - DebugLib - IoLib - OmapLib - -[FixedPcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart - diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c deleted file mode 100644 index 6b7879b02bd6..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c +++ /dev/null @@ -1,165 +0,0 @@ -/** @file - Do a generic Cold Reset for OMAP3550 and BeagleBoard specific Warm reset - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - - -#include - -#include -#include -#include -#include -#include -#include -#include - -#include - - -VOID -ShutdownEfi ( - VOID - ) -{ - EFI_STATUS Status; - UINTN MemoryMapSize; - EFI_MEMORY_DESCRIPTOR *MemoryMap; - UINTN MapKey; - UINTN DescriptorSize; - UINTN DescriptorVersion; - UINTN Pages; - - MemoryMap = NULL; - MemoryMapSize = 0; - do { - Status = gBS->GetMemoryMap ( - &MemoryMapSize, - MemoryMap, - &MapKey, - &DescriptorSize, - &DescriptorVersion - ); - if (Status == EFI_BUFFER_TOO_SMALL) { - - Pages = EFI_SIZE_TO_PAGES (MemoryMapSize) + 1; - MemoryMap = AllocatePages (Pages); - - // - // Get System MemoryMap - // - Status = gBS->GetMemoryMap ( - &MemoryMapSize, - MemoryMap, - &MapKey, - &DescriptorSize, - &DescriptorVersion - ); - // Don't do anything between the GetMemoryMap() and ExitBootServices() - if (!EFI_ERROR (Status)) { - Status = gBS->ExitBootServices (gImageHandle, MapKey); - if (EFI_ERROR (Status)) { - FreePages (MemoryMap, Pages); - MemoryMap = NULL; - MemoryMapSize = 0; - } - } - } - } while (EFI_ERROR (Status)); - - //Clean and invalidate caches. - WriteBackInvalidateDataCache(); - InvalidateInstructionCache(); - - //Turning off Caches and MMU - ArmDisableDataCache (); - ArmDisableInstructionCache (); - ArmDisableMmu (); -} - -typedef -VOID -(EFIAPI *CALL_STUB)( - VOID -); - - -/** - Resets the entire platform. - - @param ResetType The type of reset to perform. - @param ResetStatus The status code for the reset. - @param DataSize The size, in bytes, of WatchdogData. - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or - EfiResetShutdown the data buffer starts with a Null-terminated - Unicode string, optionally followed by additional binary data. - -**/ -EFI_STATUS -EFIAPI -LibResetSystem ( - IN EFI_RESET_TYPE ResetType, - IN EFI_STATUS ResetStatus, - IN UINTN DataSize, - IN CHAR16 *ResetData OPTIONAL - ) -{ - CALL_STUB StartOfFv; - - if (ResetData != NULL) { - DEBUG((EFI_D_ERROR, "%s", ResetData)); - } - - ShutdownEfi (); - - switch (ResetType) { - case EfiResetWarm: - //Perform warm reset of the system by jumping to the begining of the FV - StartOfFv = (CALL_STUB)(UINTN)PcdGet64 (PcdFvBaseAddress); - StartOfFv (); - break; - case EfiResetCold: - case EfiResetShutdown: - default: - //Perform cold reset of the system. - MmioOr32 (PRM_RSTCTRL, RST_DPLL3); - while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1); - break; - } - - // If the reset didn't work, return an error. - ASSERT (FALSE); - return EFI_DEVICE_ERROR; -} - - - -/** - Initialize any infrastructure required for LibResetSystem () to function. - - @param ImageHandle The firmware allocated handle for the EFI image. - @param SystemTable A pointer to the EFI System Table. - - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS. - -**/ -EFI_STATUS -EFIAPI -LibInitializeResetSystem ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - return EFI_SUCCESS; -} - diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf deleted file mode 100644 index 27bb8d1833a0..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf +++ /dev/null @@ -1,49 +0,0 @@ -#/** @file -# Reset System lib to make it easy to port new platforms -# -# Copyright (c) 2008, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardResetSystemLib - FILE_GUID = 781371a2-3fdd-41d4-96a1-7b34cbc9e895 - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = EfiResetSystemLib - - -[Sources.common] - ResetSystemLib.c - -[Packages] - MdePkg/MdePkg.dec - ArmPkg/ArmPkg.dec - EmbeddedPkg/EmbeddedPkg.dec - OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec - -[Pcd.common] - gArmTokenSpaceGuid.PcdCpuResetAddress - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress - -[LibraryClasses] - DebugLib - ArmLib - CacheMaintenanceLib - MemoryAllocationLib - UefiRuntimeServicesTableLib - TimerLib - UefiLib - UefiBootServicesTableLib - -[Pcd] - gArmTokenSpaceGuid.PcdFvBaseAddress diff --git a/Platforms/TexasInstruments/BeagleBoard/License.txt b/Platforms/TexasInstruments/BeagleBoard/License.txt deleted file mode 100755 index 05dbd3606dcc..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/License.txt +++ /dev/null @@ -1,26 +0,0 @@ -Copyright (c) 2009-2010, Apple Inc. All rights reserved. -Copyright (c) 2011-2012, ARM Limited. All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions -are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile b/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile deleted file mode 100644 index ed09e2bcde07..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -CC = gcc -CFLAGS = -g - -generate_image: generate_image.c - $(CC) $(CCFLAGS) $(LDFLAGS) -o generate_image generate_image.c - -clean: - rm -f generate_image generate_image.exe diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c b/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c deleted file mode 100644 index 7fc3faba10ca..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c +++ /dev/null @@ -1,408 +0,0 @@ -/** @file - The data structures in this code come from: - OMAP35x Applications Processor Technical Reference Manual chapter 25 - OMAP34xx Multimedia Device Technical Reference Manual chapter 26.4.8. - - You should use the OMAP35x manual when possible. Some things, like SectionKey, - are not defined in the OMAP35x manual and you have to use the OMAP34xx manual - to find the data. - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ -#include -#include -#include -#include -#include -#include - - - -//TOC structure as defined by OMAP35XX TRM. -typedef struct { - unsigned int Start; - unsigned int Size; - unsigned int Reserved1; - unsigned int Reserved2; - unsigned int Reserved3; - unsigned char Filename[12]; -} TOC_DATA; - -//NOTE: OMAP3430 TRM has CHSETTINGS and CHRAM structures. -typedef struct { - unsigned int SectionKey; - unsigned char Valid; - unsigned char Version; - unsigned short Reserved; - unsigned int Flags; - unsigned int PRM_CLKSRC_CTRL; - unsigned int PRM_CLKSEL; - unsigned int CM_CLKSEL1_EMU; - unsigned int CM_CLKSEL_CORE; - unsigned int CM_CLKSEL_WKUP; - unsigned int CM_CLKEN_PLL_DPLL3; - unsigned int CM_AUTOIDLE_PLL_DPLL3; - unsigned int CM_CLKSEL1_PLL; - unsigned int CM_CLKEN_PLL_DPLL4; - unsigned int CM_AUTOIDLE_PLL_DPLL4; - unsigned int CM_CLKSEL2_PLL; - unsigned int CM_CLKSEL3_PLL; - unsigned int CM_CLKEN_PLL_MPU; - unsigned int CM_AUTOIDLE_PLL_MPU; - unsigned int CM_CLKSEL1_PLL_MPU; - unsigned int CM_CLKSEL2_PLL_MPU; - unsigned int CM_CLKSTCTRL_MPU; -} CHSETTINGS_DATA; - -typedef struct { - unsigned int SectionKey; - unsigned char Valid; - unsigned char Reserved1; - unsigned char Reserved2; - unsigned char Reserved3; - unsigned short SDRC_SYSCONFIG_LSB; - unsigned short SDRC_CS_CFG_LSB; - unsigned short SDRC_SHARING_LSB; - unsigned short SDRC_ERR_TYPE_LSB; - unsigned int SDRC_DLLA_CTRL; - unsigned short Reserved4; - unsigned short Reserved5; - unsigned int SDRC_POWER; - unsigned short MEMORY_TYPE_CS0; - unsigned short Reserved6; - unsigned int SDRC_MCFG_0; - unsigned short SDRC_MR_0_LSB; - unsigned short SDRC_EMR1_0_LSB; - unsigned short SDRC_EMR2_0_LSB; - unsigned short SDRC_EMR3_0_LSB; - unsigned int SDRC_ACTIM_CTRLA_0; - unsigned int SDRC_ACTIM_CTRLB_0; - unsigned int SDRC_RFRCTRL_0; - unsigned short MEMORY_TYPE_CS1; - unsigned short Reserved7; - unsigned int SDRC_MCFG_1; - unsigned short SDRC_MR_1_LSB; - unsigned short SDRC_EMR1_1_LSB; - unsigned short SDRC_EMR2_1_LSB; - unsigned short SDRC_EMR3_1_LSB; - unsigned int SDRC_ACTIM_CTRLA_1; - unsigned int SDRC_ACTIM_CTRLB_1; - unsigned int SDRC_RFRCTRL_1; - unsigned int Reserved8; - unsigned short Flags; - unsigned short Reserved9; -} CHRAM_DATA; - -#define CHSETTINGS_START 0xA0 -#define CHSETTINGS_SIZE 0x50 -#define CHRAM_START 0xF0 -#define CHRAM_SIZE 0x5C -#define CLOSING_TOC_ITEM_SIZE 4 - -unsigned char gConfigurationHeader[512]; -unsigned int gImageExecutionAddress; -char *gInputImageFile = NULL; -char *gOutputImageFile = NULL; -char *gDataFile = NULL; - -static -void -PrintUsage ( - void - ) -{ - printf("Usage..\n"); -} - -static -void -PopulateCHSETTINGSData ( - FILE *DataFile, - CHSETTINGS_DATA *CHSETTINGSData - ) -{ - unsigned int Value; - - CHSETTINGSData->SectionKey = 0xC0C0C0C1; - CHSETTINGSData->Valid = 0x1; - CHSETTINGSData->Version = 0x1; - CHSETTINGSData->Reserved = 0x00; - CHSETTINGSData->Flags = 0x050001FD; - - //General clock settings. - fscanf(DataFile, "PRM_CLKSRC_CTRL=0x%08x\n", &Value); - CHSETTINGSData->PRM_CLKSRC_CTRL = Value; - fscanf(DataFile, "PRM_CLKSEL=0x%08x\n", &Value); - CHSETTINGSData->PRM_CLKSEL = Value; - fscanf(DataFile, "CM_CLKSEL1_EMU=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL1_EMU = Value; - - //Clock configuration - fscanf(DataFile, "CM_CLKSEL_CORE=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL_CORE = Value; - fscanf(DataFile, "CM_CLKSEL_WKUP=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL_WKUP = Value; - - //DPLL3 (Core) settings - fscanf(DataFile, "CM_CLKEN_PLL_DPLL3=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKEN_PLL_DPLL3 = Value; - fscanf(DataFile, "CM_AUTOIDLE_PLL_DPLL3=0x%08x\n", &Value); - CHSETTINGSData->CM_AUTOIDLE_PLL_DPLL3 = Value; - fscanf(DataFile, "CM_CLKSEL1_PLL=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL1_PLL = Value; - - //DPLL4 (Peripheral) settings - fscanf(DataFile, "CM_CLKEN_PLL_DPLL4=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKEN_PLL_DPLL4 = Value; - fscanf(DataFile, "CM_AUTOIDLE_PLL_DPLL4=0x%08x\n", &Value); - CHSETTINGSData->CM_AUTOIDLE_PLL_DPLL4 = Value; - fscanf(DataFile, "CM_CLKSEL2_PLL=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL2_PLL = Value; - fscanf(DataFile, "CM_CLKSEL3_PLL=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL3_PLL = Value; - - //DPLL1 (MPU) settings - fscanf(DataFile, "CM_CLKEN_PLL_MPU=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKEN_PLL_MPU = Value; - fscanf(DataFile, "CM_AUTOIDLE_PLL_MPU=0x%08x\n", &Value); - CHSETTINGSData->CM_AUTOIDLE_PLL_MPU = Value; - fscanf(DataFile, "CM_CLKSEL1_PLL_MPU=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL1_PLL_MPU = Value; - fscanf(DataFile, "CM_CLKSEL2_PLL_MPU=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSEL2_PLL_MPU = Value; - fscanf(DataFile, "CM_CLKSTCTRL_MPU=0x%08x\n", &Value); - CHSETTINGSData->CM_CLKSTCTRL_MPU = Value; -} - -static -void -PopulateCHRAMData ( - FILE *DataFile, - CHRAM_DATA *CHRAMData - ) -{ - unsigned int Value; - - CHRAMData->SectionKey = 0xC0C0C0C2; - CHRAMData->Valid = 0x1; - - fscanf(DataFile, "SDRC_SYSCONFIG_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_SYSCONFIG_LSB = Value; - fscanf(DataFile, "SDRC_CS_CFG_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_CS_CFG_LSB = Value; - fscanf(DataFile, "SDRC_SHARING_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_SHARING_LSB = Value; - fscanf(DataFile, "SDRC_ERR_TYPE_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_ERR_TYPE_LSB = Value; - fscanf(DataFile, "SDRC_DLLA_CTRL=0x%08x\n", &Value); - CHRAMData->SDRC_DLLA_CTRL = Value; - fscanf(DataFile, "SDRC_POWER=0x%08x\n", &Value); - CHRAMData->SDRC_POWER = Value; - fscanf(DataFile, "MEMORY_TYPE_CS0=0x%04x\n", &Value); - CHRAMData->MEMORY_TYPE_CS0 = Value; - fscanf(DataFile, "SDRC_MCFG_0=0x%08x\n", &Value); - CHRAMData->SDRC_MCFG_0 = Value; - fscanf(DataFile, "SDRC_MR_0_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_MR_0_LSB = Value; - fscanf(DataFile, "SDRC_EMR1_0_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR1_0_LSB = Value; - fscanf(DataFile, "SDRC_EMR2_0_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR2_0_LSB = Value; - fscanf(DataFile, "SDRC_EMR3_0_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR3_0_LSB = Value; - fscanf(DataFile, "SDRC_ACTIM_CTRLA_0=0x%08x\n", &Value); - CHRAMData->SDRC_ACTIM_CTRLA_0 = Value; - fscanf(DataFile, "SDRC_ACTIM_CTRLB_0=0x%08x\n", &Value); - CHRAMData->SDRC_ACTIM_CTRLB_0 = Value; - fscanf(DataFile, "SDRC_RFRCTRL_0=0x%08x\n", &Value); - CHRAMData->SDRC_RFRCTRL_0 = Value; - fscanf(DataFile, "MEMORY_TYPE_CS1=0x%04x\n", &Value); - CHRAMData->MEMORY_TYPE_CS1 = Value; - fscanf(DataFile, "SDRC_MCFG_1=0x%08x\n", &Value); - CHRAMData->SDRC_MCFG_1 = Value; - fscanf(DataFile, "SDRC_MR_1_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_MR_1_LSB = Value; - fscanf(DataFile, "SDRC_EMR1_1_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR1_1_LSB = Value; - fscanf(DataFile, "SDRC_EMR2_1_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR2_1_LSB = Value; - fscanf(DataFile, "SDRC_EMR3_1_LSB=0x%04x\n", &Value); - CHRAMData->SDRC_EMR3_1_LSB = Value; - fscanf(DataFile, "SDRC_ACTIM_CTRLA_1=0x%08x\n", &Value); - CHRAMData->SDRC_ACTIM_CTRLA_1 = Value; - fscanf(DataFile, "SDRC_ACTIM_CTRLB_1=0x%08x\n", &Value); - CHRAMData->SDRC_ACTIM_CTRLB_1 = Value; - fscanf(DataFile, "SDRC_RFRCTRL_1=0x%08x\n", &Value); - CHRAMData->SDRC_RFRCTRL_1 = Value; - - CHRAMData->Flags = 0x0003; -} - -static -void -PrepareConfigurationHeader ( - void - ) -{ - TOC_DATA Toc; - CHSETTINGS_DATA CHSETTINGSData; - CHRAM_DATA CHRAMData; - unsigned int ConfigurationHdrOffset = 0; - FILE *DataFile; - - // Open data file - DataFile = fopen(gDataFile, "rb"); - if (DataFile == NULL) { - fprintf(stderr, "Can't open data file %s.\n", gDataFile); - exit(1); - } - - //Initialize configuration header. - memset(gConfigurationHeader, 0x00, sizeof(gConfigurationHeader)); - - //CHSETTINGS TOC - memset(&Toc, 0x00, sizeof(TOC_DATA)); - Toc.Start = CHSETTINGS_START; - Toc.Size = CHSETTINGS_SIZE; - strcpy((char *)Toc.Filename, (const char *)"CHSETTINGS"); - memcpy(gConfigurationHeader + ConfigurationHdrOffset, &Toc, sizeof(TOC_DATA)); - - //Populate CHSETTINGS Data - memset(&CHSETTINGSData, 0x00, sizeof(CHSETTINGS_DATA)); - PopulateCHSETTINGSData(DataFile, &CHSETTINGSData); - memcpy(gConfigurationHeader + Toc.Start, &CHSETTINGSData, Toc.Size); - - //Adjust ConfigurationHdrOffset to point to next TOC - ConfigurationHdrOffset += sizeof(TOC_DATA); - - //CHRAM TOC - memset(&Toc, 0x00, sizeof(TOC_DATA)); - Toc.Start = CHRAM_START; - Toc.Size = CHRAM_SIZE; - strcpy((char *)Toc.Filename, (const char *)"CHRAM"); - memcpy(gConfigurationHeader + ConfigurationHdrOffset, &Toc, sizeof(TOC_DATA)); - - //Populate CHRAM Data - memset(&CHRAMData, 0x00, sizeof(CHRAM_DATA)); - PopulateCHRAMData(DataFile, &CHRAMData); - memcpy(gConfigurationHeader + Toc.Start, &CHRAMData, Toc.Size); - - //Adjust ConfigurationHdrOffset to point to next TOC - ConfigurationHdrOffset += sizeof(TOC_DATA); - - //Closing TOC item - memset(gConfigurationHeader + ConfigurationHdrOffset, 0xFF, CLOSING_TOC_ITEM_SIZE); - ConfigurationHdrOffset += CLOSING_TOC_ITEM_SIZE; - - // Close data file - fclose(DataFile); -} - -static -void -ConstructImage ( - void - ) -{ - FILE *InputFile; - FILE *OutputFile; - unsigned int InputImageFileSize; - struct stat FileStat; - char Ch; - unsigned int i; - - InputFile = fopen(gInputImageFile, "rb"); - if (InputFile == NULL) { - fprintf(stderr, "Can't open input file.\n"); - exit(0); - } - - // Get the size of the input image. - fstat(fileno(InputFile), &FileStat); - InputImageFileSize = FileStat.st_size; - - OutputFile = fopen(gOutputImageFile, "wb"); - if (OutputFile == NULL) { - fprintf(stderr, "Can't open output file %s.\n", gOutputImageFile); - exit(0); - } - - // Write Configuration header - fwrite(gConfigurationHeader, 1, sizeof(gConfigurationHeader), OutputFile); - - // Write image header (Input image size, execution address) - fwrite(&InputImageFileSize, 1, 4, OutputFile); - fwrite(&gImageExecutionAddress, 1, 4, OutputFile); - - // Copy input image to the output file. - for (i = 0; i < InputImageFileSize; i++) { - fread(&Ch, 1, 1, InputFile); - fwrite(&Ch, 1, 1, OutputFile); - } - - fclose(InputFile); - fclose(OutputFile); -} - - -int -main ( - int argc, - char** argv - ) -{ - char Ch; - unsigned char *ptr; - int i; - int TwoArg; - - if (argc == 1) { - PrintUsage (); - exit(1); - } - - for (i=1; i < argc; i++) { - if (argv[i][0] == '-') { - // TwoArg TRUE -E 0x123, FALSE -E0x1234 - TwoArg = (argv[i][2] != ' '); - switch (argv[i][1]) { - case 'E': /* Image execution address */ - gImageExecutionAddress = strtoul (TwoArg ? argv[i+1] : &argv[i][2], (char **)&ptr, 16); - break; - - case 'I': /* Input image file */ - gInputImageFile = TwoArg ? argv[i+1] : &argv[i][2]; - break; - - case 'O': /* Output image file */ - gOutputImageFile = TwoArg ? argv[i+1] : &argv[i][2]; - break; - - case 'D': /* Data file */ - gDataFile = TwoArg ? argv[i+1] : &argv[i][2]; - break; - - default: - abort (); - } - } - } - - - //Prepare configuration header - PrepareConfigurationHeader (); - - //Build image with configuration header + image header + image - ConstructImage (); - - return 0; -} diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/makefile b/Platforms/TexasInstruments/BeagleBoard/Tools/makefile deleted file mode 100755 index cf50b8f2cf12..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Tools/makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -all: GenerateImage replace - -GenerateImage: generate_image.c - $(CC) $(CCFLAGS) $(LDFLAGS) -o GenerateImage.exe generate_image.c - -replace: replace.c - $(CC) $(CCFLAGS) $(LDFLAGS) -o replace.exe replace.c - -clean: - del GenerateImage.exe generate_image.obj replace.exe replace.obj diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c b/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c deleted file mode 100644 index 00f42495929b..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c +++ /dev/null @@ -1,146 +0,0 @@ -// -// Quick hack to work around not having sed, or any other reasonable -// way to edit a file from a script on Windows...... -// -// Copyright (c) 2010, Apple Inc. All rights reserved.
-// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// - -#include -#include -#include - -#define TRUE 1 -#define FALSE 0 - -typedef struct { - char *Match; - int MatchSize; - char *Replace; -} MATCH_PAIR; - -void -Usage (char *Name) -{ - printf ("\n%s OldFile NewFile MatchString ReplaceString [MatchString2 ReplaceString2]*\n", Name); - printf (" OldFile - Must be arg[1] File to search for MatchStrings\n"); - printf (" NewFile - Must be arg[2] File where MatchString has been replaced with ReplaceString\n"); - printf (" MatchString & ReplaceString. Required arguments.\n"); - printf (" More MatchString/ReplaceString pairs are supported.\n"); -} - -// -// argv[1] - Old File -// argv[2] - New File -// argv[3+n] - Match String -// argv[4+n] - Replace string -int -main (int argc, char **argv) -{ - FILE *In, *Out; - char *Key, *Replace; - int c, i, n, Len, MaxLenKey = 0, MinLenKey = INT_MAX; - unsigned long InFileSize, InFilePos; - MATCH_PAIR *Match; - int MaxMatch; - int ReadCount; - int Found; - - if (argc < 5) { - fprintf (stderr, "Need at least two files and one Match/Replacement string pair\n"); - Usage (argv[0]); - return -1; - } else if ((argc % 2) == 0) { - fprintf (stderr, "Match and Replace string must come in pairs\n"); - return -4; - } - - In = fopen (argv[1], "r"); - fseek (In, 0, SEEK_END); - InFileSize = ftell (In); - if (InFileSize == 0) { - fprintf (stderr, "Could not open %s\n", argv[1]); - return -6; - } - fseek (In, 0, SEEK_SET); - - - Out = fopen (argv[2], "w+"); - if ((In == NULL) || (Out == NULL)) { - fprintf (stderr, "Could not open %s\n", argv[2]); - return -2; - } - - MaxMatch = (argc - 2)/2; - Match = calloc (MaxMatch, sizeof (MATCH_PAIR)); - if (Match == NULL) { - return -7; - } - - for (n=0; n < MaxMatch; n++) { - Match[n].Match = argv[3 + n*2]; - Match[n].MatchSize = strlen (argv[3 + n*2]); - Match[n].Replace = argv[3 + n*2 + 1]; - if (Match[n].MatchSize > MaxLenKey) { - // Max size of match/replace string pair - MaxLenKey = Match[n].MatchSize; - } - if (Match[n].MatchSize < MinLenKey) { - MinLenKey = Match[n].MatchSize; - } - } - - Key = malloc (MaxLenKey); - if (Key == NULL) { - return -5; - } - - // Search for a match by reading every possition of the file - // into a buffer that is as big as the maximum search key size. - // Then we can search the keys for a match. If no match - // copy the old file character to the new file. If it is a match - // then copy the replacement string into the output file. - // This code assumes the file system is smart and caches the - // file in a buffer. So all the reads don't really hit the disk. - InFilePos = 0; - while (InFilePos < (InFileSize - MinLenKey)) { - fseek (In, InFilePos, SEEK_SET); - ReadCount = fread (Key, 1, MaxLenKey, In); - for (i = 0, Found = FALSE;i < MaxMatch; i++) { - if (ReadCount >= Match[i].MatchSize) { - if (!memcmp (Key, Match[i].Match, Match[i].MatchSize)) { - InFilePos += (Match[i].MatchSize - 1); - fputs (Match[i].Replace, Out); - Found = TRUE; - break; - } - } - } - if (!Found) { - fputc (Key[0], Out); - } - - InFilePos++; - } - - // We stoped searching when we got to the point that we could no longer match. - // So the last few bytes of the file are not copied in the privous loop - fseek (In, InFilePos, SEEK_SET); - while ((c = fgetc (In)) != EOF) { - fputc (c, Out); - } - - fclose (In); - fclose (Out); - free (Key); - free (Match); - return 0; -} - diff --git a/Platforms/TexasInstruments/BeagleBoard/b.bat b/Platforms/TexasInstruments/BeagleBoard/b.bat deleted file mode 100755 index 76ddea68bd90..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/b.bat +++ /dev/null @@ -1,68 +0,0 @@ -@REM Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-@REM This program and the accompanying materials -@REM are licensed and made available under the terms and conditions of the BSD License -@REM which accompanies this distribution. The full text of the license may be found at -@REM http://opensource.org/licenses/bsd-license.php -@REM -@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -@REM - -@REM Example usage of this script. default is a DEBUG build -@REM b -@REM b clean -@REM b release -@REM b release clean -@REM b -v -y build.log - -ECHO OFF -@REM Setup Build environment. Sets WORKSPACE and puts build in path -CALL ..\edksetup.bat - -@REM Set for tools chain. Currently RVCT -SET TARGET_TOOLS=RVCT -SET TARGET=DEBUG - -@if /I "%1"=="RELEASE" ( - @REM If 1st argument is release set TARGET to RELEASE and shift arguments to remove it - SET TARGET=RELEASE - shift /1 -) - -SET BUILD_ROOT=%WORKSPACE%\Build\BeagleBoard\%TARGET%_%TARGET_TOOLS% - -@REM Build the Beagle Board firmware and creat an FD (FLASH Device) Image. -CALL build -p BeagleBoardPkg\BeagleBoardPkg.dsc -a ARM -t %TARGET_TOOLS% -b %TARGET% %1 %2 %3 %4 %5 %6 %7 %8 -@if ERRORLEVEL 1 goto Exit - -@if /I "%1"=="CLEAN" goto Clean - -@REM -@REM Ram starts at 0x80000000 -@REM OMAP 3530 TRM defines 0x80008208 as the entry point -@REM The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry -@REM point looks so strange. -@REM OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM) -@REM -@cd Tools - -ECHO Building tools... -CALL nmake - -ECHO Patching image with ConfigurationHeader.dat -CALL GenerateImage -D ..\ConfigurationHeader.dat -E 0x80008208 -I %BUILD_ROOT%\FV\BEAGLEBOARD_EFI.fd -O %BUILD_ROOT%\FV\BeagleBoard_EFI_flashboot.fd - -ECHO Patching ..\Debugger_scripts ... -SET DEBUGGER_SCRIPT=..\Debugger_scripts -@for /f %%a IN ('dir /b %DEBUGGER_SCRIPT%\*.inc %DEBUGGER_SCRIPT%\*.cmm') do ( - @CALL replace %DEBUGGER_SCRIPT%\%%a %BUILD_ROOT%\%%a ZZZZZZ %BUILD_ROOT% WWWWWW %WORKSPACE% -) - -cd .. -:Exit -EXIT /B - -:Clean -cd Tools -CALL nmake clean -cd .. diff --git a/Platforms/TexasInstruments/BeagleBoard/ba.bat b/Platforms/TexasInstruments/BeagleBoard/ba.bat deleted file mode 100755 index 24a60e46d877..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/ba.bat +++ /dev/null @@ -1,68 +0,0 @@ -@REM Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
-@REM This program and the accompanying materials -@REM are licensed and made available under the terms and conditions of the BSD License -@REM which accompanies this distribution. The full text of the license may be found at -@REM http://opensource.org/licenses/bsd-license.php -@REM -@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -@REM - -@REM Example usage of this script. default is a DEBUG build -@REM b -@REM b clean -@REM b release -@REM b release clean -@REM b -v -y build.log - -ECHO OFF -@REM Setup Build environment. Sets WORKSPACE and puts build in path -CALL ..\edksetup.bat - -@REM Set for tools chain. Currently ARMGCC -SET TARGET_TOOLS=ARMGCC -SET TARGET=DEBUG - -@if /I "%1"=="RELEASE" ( - @REM If 1st argument is release set TARGET to RELEASE and shift arguments to remove it - SET TARGET=RELEASE - shift /1 -) - -SET BUILD_ROOT=%WORKSPACE%\Build\BeagleBoard\%TARGET%_%TARGET_TOOLS% - -@REM Build the Beagle Board firmware and creat an FD (FLASH Device) Image. -CALL build -p BeagleBoardPkg\BeagleBoardPkg.dsc -a ARM -t %TARGET_TOOLS% -b %TARGET% %1 %2 %3 %4 %5 %6 %7 %8 -@if ERRORLEVEL 1 goto Exit - -@if /I "%1"=="CLEAN" goto Clean - -@REM -@REM Ram starts at 0x80000000 -@REM OMAP 3530 TRM defines 0x80008208 as the entry point -@REM The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry -@REM point looks so strange. -@REM OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM) -@REM -@cd Tools - -ECHO Building tools... -CALL nmake - -ECHO Patching image with ConfigurationHeader.dat -CALL GenerateImage -D ..\ConfigurationHeader.dat -E 0x80008208 -I %BUILD_ROOT%\FV\BEAGLEBOARD_EFI.fd -O %BUILD_ROOT%\FV\BeagleBoard_EFI_flashboot.fd - -ECHO Patching ..\Debugger_scripts ... -SET DEBUGGER_SCRIPT=..\Debugger_scripts -@for /f %%a IN ('dir /b %DEBUGGER_SCRIPT%\*.inc %DEBUGGER_SCRIPT%\*.cmm') do ( - @CALL replace %DEBUGGER_SCRIPT%\%%a %BUILD_ROOT%\%%a ZZZZZZ %BUILD_ROOT% WWWWWW %WORKSPACE% -) - -cd .. -:Exit -EXIT /B - -:Clean -cd Tools -CALL nmake clean -cd .. diff --git a/Platforms/TexasInstruments/BeagleBoard/build.sh b/Platforms/TexasInstruments/BeagleBoard/build.sh deleted file mode 100755 index 32b22f085777..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/build.sh +++ /dev/null @@ -1,150 +0,0 @@ -#!/bin/bash -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -set -e -shopt -s nocasematch - -function process_debug_scripts { - if [[ -d $1 ]]; then - for filename in `ls $1` - do - sed -e "s@ZZZZZZ@$BUILD_ROOT@g" -e "s@WWWWWW@$WORKSPACE@g" \ - "$1/$filename" \ - > "$BUILD_ROOT/$filename" - - #For ARMCYGWIN, we have to change /cygdrive/c to c: - if [[ $TARGET_TOOLS == RVCT31CYGWIN ]] - then - mv "$BUILD_ROOT/$filename" "$BUILD_ROOT/$filename"_temp - sed -e "s@/cygdrive/\(.\)@\1:@g" \ - "$BUILD_ROOT/$filename"_temp \ - > "$BUILD_ROOT/$filename" - rm -f "$BUILD_ROOT/$filename"_temp - fi - done - fi -} - - -# -# Setup workspace if it is not set -# -if [ -z "${WORKSPACE:-}" ] -then - echo Initializing workspace - cd .. -# Uses an external BaseTools project -# export EDK_TOOLS_PATH=`pwd`/../BaseTools -# Uses the BaseTools in edk2 - export EDK_TOOLS_PATH=`pwd`/BaseTools - source edksetup.sh BaseTools -else - echo Building from: $WORKSPACE -fi - -# -# Pick a default tool type for a given OS if no toolchain already defined -# -if [ -z "${TARGET_TOOLS:-}" ] -then - case `uname` in - CYGWIN*) - TARGET_TOOLS=RVCT31CYGWIN - ;; - Linux*) - if [[ ! -z `locate arm-linux-gnueabi-gcc` ]]; then - TARGET_TOOLS=ARMLINUXGCC - else - TARGET_TOOLS=ARMGCC - fi - ;; - Darwin*) - Major=$(uname -r | cut -f 1 -d '.') - if [[ $Major == 9 ]] - then - # Not supported by this open source project - TARGET_TOOLS=XCODE31 - else - TARGET_TOOLS=XCODE32 - fi - ;; - esac -fi - -TARGET=DEBUG -for arg in "$@" -do - if [[ $arg == RELEASE ]]; - then - TARGET=RELEASE - fi -done - -BUILD_ROOT=$WORKSPACE/Build/BeagleBoard/"$TARGET"_"$TARGET_TOOLS" -GENERATE_IMAGE=$WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image -FLASH_BOOT=$BUILD_ROOT/FV/BeagleBoard_EFI_flashboot.fd - -if [[ ! -e $EDK_TOOLS_PATH/Source/C/bin ]]; -then - # build the tools if they don't yet exist - echo Building tools: $EDK_TOOLS_PATH - make -C $EDK_TOOLS_PATH -else - echo using prebuilt tools -fi - -# -# Build the edk2 BeagleBoard code -# -if [[ $TARGET == RELEASE ]]; then - build -p $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc -a ARM -t $TARGET_TOOLS -b $TARGET -D DEBUG_TARGET=RELEASE ${2:-} ${3:-} ${4:-} ${5:-} ${6:-} ${7:-} ${8:-} -else - build -p ${WORKSPACE:-}/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc -a ARM -t $TARGET_TOOLS -b $TARGET ${1:-} ${2:-} ${3:-} ${4:-} ${5:-} ${6:-} ${7:-} ${8:-} -fi - - -for arg in "$@" -do - if [[ $arg == clean ]]; then - # no need to post process if we are doing a clean - exit - elif [[ $arg == cleanall ]]; then - make -C $EDK_TOOLS_PATH clean - make -C $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools clean - exit - - fi -done - - -# -# Build the tool used to patch the FLASH image to work with the Beagle board ROM -# -if [[ ! -e $GENERATE_IMAGE ]]; -then - make -C $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools -fi - -echo Patching FD to work with BeagleBoard ROM -rm -f $FLASH_BOOT - -# -# Ram starts at 0x80000000 -# OMAP 3530 TRM defines 0x80008000 as the entry point -# The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry -# point looks so strange. -# OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM) -# -$GENERATE_IMAGE -D $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat -E 0x80008000 -I $BUILD_ROOT/FV/BEAGLEBOARD_EFI.fd -O $FLASH_BOOT - -echo Creating debugger scripts -process_debug_scripts $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts - diff --git a/Platforms/TexasInstruments/BeagleBoard/readme.txt b/Platforms/TexasInstruments/BeagleBoard/readme.txt deleted file mode 100644 index d15b1fb2db4a..000000000000 --- a/Platforms/TexasInstruments/BeagleBoard/readme.txt +++ /dev/null @@ -1,78 +0,0 @@ -On Ubuntu 10.04, in your $(WORKROOT) directory (eg: ~/dev/) - -Build UEFI for the BeagleBoard : -================================ -# Requirements -sudo apt-get install uuid-dev - -# Get the arm-none-eabi Toolchain: -cd $(WORKROOT) -wget http://www.codesourcery.com/sgpp/lite/arm/portal/package7813/public/arm-none-eabi/arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2 -tar xjf arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2 -Add the arm-none-eabi toolchain to your path - -# Build UEFI -svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest -cd $(WORKROOT)/edk2 -svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest -patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch -cd OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/ -./build.sh - -# To Build a Release verion of UEFI -./build.sh RELEASE - - -Test UEFI on qEmu : -=================== - -Installing Linaro qEmu: ------------------------ -cd $(WORKROOT) -git clone git://git.linaro.org/qemu/qemu-linaro.git -cd $(WORKROOT)/qemu-linaro -./configure --target-list=arm-softmmu,arm-linux-user,armeb-linux-user -make - -Installing Linaro image Creator: --------------------------------- -wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-tools-0.4.8.tar.gz -tar xzf linaro-image-tools-0.4.8.tar.gz -cd $(WORKROOT)/linaro-image-tools-0.4.8/ -sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found - -Creating u-boot + Linux Linaro image: -------------------------------------- -mkdir $(WORKROOT)/beagle_image && cd $(WORKROOT)/beagle_image -wget http://releases.linaro.org/platform/linaro-m/hwpacks/final/hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz -wget http://releases.linaro.org/platform/linaro-m/headless/release-candidate/linaro-m-headless-tar-20101101-0.tar.gz -sudo $(WORKROOT)/linaro-image-tools-0.4.8/linaro-media-create --image_file beagle_sd.img --dev beagle --binary linaro-m-headless-tar-20101101-0.tar.gz --hwpack hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz -sudo chmod a+rw beagle_sd.img - -Test u-boot + Linux Linaro image on qEmu: ------------------------------------------ -$(WORKROOT)/qemu-linaro/arm-softmmu/qemu-system-arm -M beagle -sd $(WORKROOT)/beagle_image/beagle_sd.img -serial stdio -clock unix -# in u-boot: -boot - -Start UEFI from NOR Flash : ---------------------------- -# Adding zImage to beagle_sd.img -mkdir /tmp/beagle_img1 -sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1 -cp zImage /tmp/beagle_img1 -sudo umount /tmp/beagle_img1 - -./qemu-system-arm -M beagle -mtdblock /work/tianocore/Build/BeagleBoard/DEBUG_ARMGCC/FV/BeagleBoard_EFI_flashboot.fd -serial stdio -sd /work/linaro-image-tools-0.4.8/beagle_sd.img - -Start UEFI from SD card : -------------------------- -# To replace u-boot by uefi in the SD card -1) Build the BeagleBoard UEFI firmware without the OMAP353x header -cd $(WORKROOT)/edk2/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/ -./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1 - -2) Replace u-boot by UEFI -sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1 -sudo cp ../Build/BeagleBoard/DEBUG_ARMGCC/FV/BEAGLEBOARD_EFI.fd /tmp/beagle_img1/u-boot.bin -sudo umount /tmp/beagle_img1