diff mbox series

[7/8] arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity

Message ID 20230102114152.297305-7-krzysztof.kozlowski@linaro.org
State Accepted
Commit 4ded91530544afdbac350f609e6597076f569e52
Headers show
Series None | expand

Commit Message

Krzysztof Kozlowski Jan. 2, 2023, 11:41 a.m. UTC 
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 3ed8c84e25b8..f3669c1a311e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -760,7 +760,7 @@  &swr0 {
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -769,7 +769,7 @@  left_spkr: speaker@0,3 {
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;