@@ -225,12 +225,15 @@ static int bbclk_ev(struct snd_soc_dapm_widget *w,
}
static const struct snd_kcontrol_new controls[] = {
+ SOC_DAPM_PIN_SWITCH("Headphone"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("WM1250 Input"),
SOC_DAPM_PIN_SWITCH("WM1250 Output"),
};
static const struct snd_soc_dapm_widget widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_HP("Headset Mic", NULL),
SND_SOC_DAPM_MIC("AMIC", NULL),
SND_SOC_DAPM_MIC("DMIC", NULL),
@@ -255,6 +258,16 @@ static const struct snd_soc_dapm_route audio_paths[] = {
};
static struct snd_soc_jack littlemill_headset;
+static struct snd_soc_jack_pin littlemill_headset_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
static int littlemill_late_probe(struct snd_soc_card *card)
{
@@ -281,12 +294,14 @@ static int littlemill_late_probe(struct snd_soc_card *card)
if (ret < 0)
return ret;
- ret = snd_soc_card_jack_new(card, "Headset",
- SND_JACK_HEADSET | SND_JACK_MECHANICAL |
- SND_JACK_BTN_0 | SND_JACK_BTN_1 |
- SND_JACK_BTN_2 | SND_JACK_BTN_3 |
- SND_JACK_BTN_4 | SND_JACK_BTN_5,
- &littlemill_headset);
+ ret = snd_soc_card_jack_new_pins(card, "Headset",
+ SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+ SND_JACK_BTN_4 | SND_JACK_BTN_5,
+ &littlemill_headset,
+ littlemill_headset_pins,
+ ARRAY_SIZE(littlemill_headset_pins));
if (ret)
return ret;
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The WM8958 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol and add the necessary widgets. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> --- Would SND_JACK_MECHANICAL be useful as a kcontrol as well? sound/soc/samsung/littlemill.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)