| Message ID | 20231027082144.639369-2-wtli@nuvoton.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add DMIC slew rate select | expand |
On Fri, Oct 27, 2023 at 03:11:35PM +0100, Conor Dooley wrote: > Hey, > > On Fri, Oct 27, 2023 at 04:21:43PM +0800, Seven Lee wrote: > > Add input with DMIC slew rate selection > > > > Signed-off-by: Seven Lee <wtli@nuvoton.com> > > --- > > .../devicetree/bindings/sound/nuvoton,nau8821.yaml | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml > > index 3e54abd4ca74..01028b7ff85c 100644 > > --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml > > +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml > > @@ -89,6 +89,13 @@ properties: > > $ref: /schemas/types.yaml#/definitions/uint32 > > default: 3072000 > > > > + nuvoton,dmic-slew-rate-selection: > > + description: the number from 0 to 7 that sets the DMIC slew rate. > > + The unit is mV/ns. 0 is the slowest, and 7 is the fastest. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + maximum: 7 > > + default: 0 > > I meant make the property in terms of the unit, so > nuvoton,dmic-slew-rate-volt-per-sec (or similar, Rob would likely know > better how he likes the unit suffix for a more complex unit like this > one) and then make it an enum with possible values corresponding to > the real values that putting 0, 1, 2, 3 etc into the register produces. >From what I've seen, you often don't know what units the h/w settings correspond to. Often it's just fast, medium, slow or something. And here, 0 doesn't make sense if the units really are mV/ns. So I'd just drop '-selection' and be done with it. (And clear up the units part). > > Cheers, > Conor. > > > + > > nuvoton,left-input-single-end: > > description: Enable left input with single-ended settings if set. > > For the headset mic application, the single-ended control is > > @@ -127,6 +134,7 @@ examples: > > nuvoton,jack-insert-debounce = <7>; > > nuvoton,jack-eject-debounce = <0>; > > nuvoton,dmic-clk-threshold = <3072000>; > > + nuvoton,dmic-slew-rate-selection= <0>; > > #sound-dai-cells = <0>; > > }; > > }; > > -- > > 2.25.1 > >
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml index 3e54abd4ca74..01028b7ff85c 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -89,6 +89,13 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 default: 3072000 + nuvoton,dmic-slew-rate-selection: + description: the number from 0 to 7 that sets the DMIC slew rate. + The unit is mV/ns. 0 is the slowest, and 7 is the fastest. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + nuvoton,left-input-single-end: description: Enable left input with single-ended settings if set. For the headset mic application, the single-ended control is @@ -127,6 +134,7 @@ examples: nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <0>; nuvoton,dmic-clk-threshold = <3072000>; + nuvoton,dmic-slew-rate-selection= <0>; #sound-dai-cells = <0>; }; };
Add input with DMIC slew rate selection Signed-off-by: Seven Lee <wtli@nuvoton.com> --- .../devicetree/bindings/sound/nuvoton,nau8821.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)