mbox series

[resend,v3,0/6] crypto/uadk: introduce uadk crypto driver

Message ID 20221008083747.6559-1-zhangfei.gao@linaro.org
Headers show
Series crypto/uadk: introduce uadk crypto driver | expand

Message

Zhangfei Gao Oct. 8, 2022, 8:37 a.m. UTC
Introduce a new crypto PMD for hardware accelerators based on UADK [1].

UADK is a framework for user applications to access hardware accelerators.
UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
the same page table between IOMMU and MMU.
Thereby user application can directly use virtual address for device dma,
which enhances the performance as well as easy usability.

[1] https://github.com/Linaro/uadk

Test:
sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
RTE>>cryptodev_uadk_autotest
RTE>>quit

resend:
Rebase on next/for-main, which just merged series "cryptodev: rework session framework".

update in v3:
Split patches according to Akhil's suggestions
Please split the patches as below.
1. introduce driver - create files with meson.build and with probe/remove
   and device ops defined but not implemented. You do not need to write empty functions.
   Add basic documentation also which defines what the driver is.
   You can explain the build dependency here.
2. define queue structs and setup/remove APIs
3. Add data path
4. implement cipher op. Add capabilities and documentation of what is supported in each of the patch. Add feature flags etc.
5. implement auth,  add capabilities and documentation
6. test app changes.

Update in v2:
Change uadk_supported_platform to uadk_crypto_version, which matches better
than platform.
enum uadk_crypto_version {
	UADK_CRYPTO_V2,
	UADK_CRYPTO_V3,
};

Update in v1, compared with rfc

Suggested from Akhil Goyal <gakhil@marvell.com>
Only consider crypto PMD first
Split patch into small (individually compiled) patches.
Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini

Zhangfei Gao (6):
  crypto/uadk: introduce uadk crypto driver
  crypto/uadk: support basic operations
  crypto/uadk: support enqueue/dequeue operations
  crypto/uadk: support cipher algorithms
  crypto/uadk: support auth algorithms
  test/crypto: add cryptodev_uadk_autotest

 MAINTAINERS                             |    6 +
 app/test/test_cryptodev.c               |    7 +
 app/test/test_cryptodev.h               |    1 +
 doc/guides/cryptodevs/features/uadk.ini |   55 ++
 doc/guides/cryptodevs/index.rst         |    1 +
 doc/guides/cryptodevs/uadk.rst          |   74 ++
 drivers/crypto/meson.build              |    1 +
 drivers/crypto/uadk/meson.build         |   36 +
 drivers/crypto/uadk/uadk_crypto_pmd.c   | 1145 +++++++++++++++++++++++
 drivers/crypto/uadk/version.map         |    3 +
 10 files changed, 1329 insertions(+)
 create mode 100644 doc/guides/cryptodevs/features/uadk.ini
 create mode 100644 doc/guides/cryptodevs/uadk.rst
 create mode 100644 drivers/crypto/uadk/meson.build
 create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
 create mode 100644 drivers/crypto/uadk/version.map

Comments

Akhil Goyal Oct. 10, 2022, 7:55 a.m. UTC | #1
Hi Zhangfei,

I see below compilation error after executing the steps mentioned in UADK README. It would be better if you could add compilation steps for UADK in uadk.rst as well.

gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
make  all-recursive
make[1]: Entering directory '/home/gakhil/up/uadk'
Making all in .
make[2]: Entering directory '/home/gakhil/up/uadk'
depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -MP -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo wd_mempool.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -fPIC -DPIC -o .libs/wd_mempool.o
depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -MD -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -MD -MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
In file included from v1/wd.c:30:
./v1/wd_util.h:354:2: error: #error "no platform mb, define one before compiling"
  354 | #error "no platform mb, define one before compiling"
      |  ^~~~~
make[2]: *** [Makefile:788: v1/wd.lo] Error 1
make[2]: Leaving directory '/home/gakhil/up/uadk'
make[1]: *** [Makefile:859: all-recursive] Error 1
make[1]: Leaving directory '/home/gakhil/up/uadk'
make: *** [Makefile:565: all] Error 2

> -----Original Message-----
> From: Zhangfei Gao <zhangfei.gao@linaro.org>
> Sent: Saturday, October 8, 2022 2:08 PM
> To: Akhil Goyal <gakhil@marvell.com>; Declan Doherty
> <declan.doherty@intel.com>; Fan Zhang <roy.fan.zhang@intel.com>; Ashish
> Gupta <ashishg@marvell.com>; Ray Kinsella <mdr@ashroe.eu>
> Cc: dev@dpdk.org; acc@openeuler.org; Zhangfei Gao
> <zhangfei.gao@linaro.org>
> Subject: [EXT] [PATCH resend v3 0/6] crypto/uadk: introduce uadk crypto driver
> 
> External Email
> 
> ----------------------------------------------------------------------
> Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> 
> UADK is a framework for user applications to access hardware accelerators.
> UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> the same page table between IOMMU and MMU.
> Thereby user application can directly use virtual address for device dma,
> which enhances the performance as well as easy usability.
> 
> [1] https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=riOYJQEEoq2hZSApJn-
> _dXs6fqKRm8wqS-cJ48j15-
> zpW3dOS8NrcrsBD7wC4cqY&s=irxZ2g1W2PchLQnfMPsNb8WJpjCS_-
> Y_sdVRQT6wwo0&e=
> 
> Test:
> sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> RTE>>cryptodev_uadk_autotest
> RTE>>quit
> 
> resend:
> Rebase on next/for-main, which just merged series "cryptodev: rework session
> framework".
> 
> update in v3:
> Split patches according to Akhil's suggestions
> Please split the patches as below.
> 1. introduce driver - create files with meson.build and with probe/remove
>    and device ops defined but not implemented. You do not need to write empty
> functions.
>    Add basic documentation also which defines what the driver is.
>    You can explain the build dependency here.
> 2. define queue structs and setup/remove APIs
> 3. Add data path
> 4. implement cipher op. Add capabilities and documentation of what is
> supported in each of the patch. Add feature flags etc.
> 5. implement auth,  add capabilities and documentation
> 6. test app changes.
> 
> Update in v2:
> Change uadk_supported_platform to uadk_crypto_version, which matches
> better
> than platform.
> enum uadk_crypto_version {
> 	UADK_CRYPTO_V2,
> 	UADK_CRYPTO_V3,
> };
> 
> Update in v1, compared with rfc
> 
> Suggested from Akhil Goyal <gakhil@marvell.com>
> Only consider crypto PMD first
> Split patch into small (individually compiled) patches.
> Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini
> 
> Zhangfei Gao (6):
>   crypto/uadk: introduce uadk crypto driver
>   crypto/uadk: support basic operations
>   crypto/uadk: support enqueue/dequeue operations
>   crypto/uadk: support cipher algorithms
>   crypto/uadk: support auth algorithms
>   test/crypto: add cryptodev_uadk_autotest
> 
>  MAINTAINERS                             |    6 +
>  app/test/test_cryptodev.c               |    7 +
>  app/test/test_cryptodev.h               |    1 +
>  doc/guides/cryptodevs/features/uadk.ini |   55 ++
>  doc/guides/cryptodevs/index.rst         |    1 +
>  doc/guides/cryptodevs/uadk.rst          |   74 ++
>  drivers/crypto/meson.build              |    1 +
>  drivers/crypto/uadk/meson.build         |   36 +
>  drivers/crypto/uadk/uadk_crypto_pmd.c   | 1145 +++++++++++++++++++++++
>  drivers/crypto/uadk/version.map         |    3 +
>  10 files changed, 1329 insertions(+)
>  create mode 100644 doc/guides/cryptodevs/features/uadk.ini
>  create mode 100644 doc/guides/cryptodevs/uadk.rst
>  create mode 100644 drivers/crypto/uadk/meson.build
>  create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
>  create mode 100644 drivers/crypto/uadk/version.map
> 
> --
> 2.36.1
Zhangfei Gao Oct. 10, 2022, 9:30 a.m. UTC | #2
On 2022/10/10 下午3:55, Akhil Goyal wrote:
> Hi Zhangfei,
>
> I see below compilation error after executing the steps mentioned in UADK README. It would be better if you could add compilation steps for UADK in uadk.rst as well.

Sure

Will add something like this

Build & Install UADK on ARM
--------------------

```
     git clone https://github.com/Linaro/uadk.git
     cd uadk
     ./cleanup.sh
     ./autogen.sh
     ./conf.sh
     make
     sudo make install
```
* If get error:"cannot find -lnuma", please install the libnuma-dev

>
> gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
> make  all-recursive
> make[1]: Entering directory '/home/gakhil/up/uadk'
> Making all in .
> make[2]: Entering directory '/home/gakhil/up/uadk'
> depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -MP -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
> depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo wd_mempool.c &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -fPIC -DPIC -o .libs/wd_mempool.o
> depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall -Werror -fno-strict-aliasing -I./include  -DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -MD -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -MD -MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
> In file included from v1/wd.c:30:
> ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before compiling"
>    354 | #error "no platform mb, define one before compiling"
>        |  ^~~~~
> make[2]: *** [Makefile:788: v1/wd.lo] Error 1
> make[2]: Leaving directory '/home/gakhil/up/uadk'
> make[1]: *** [Makefile:859: all-recursive] Error 1
> make[1]: Leaving directory '/home/gakhil/up/uadk'
> make: *** [Makefile:565: all] Error 2
By the way, what platform are you using.
I can not reproduce this error.

Thanks
Akhil Goyal Oct. 10, 2022, 9:57 a.m. UTC | #3
> > gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
> > make  all-recursive
> > make[1]: Entering directory '/home/gakhil/up/uadk'
> > Making all in .
> > make[2]: Entering directory '/home/gakhil/up/uadk'
> > depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> Wall -Werror -fno-strict-aliasing -I./include  -
> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -
> MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
> > mv -f $depbase.Tpo $depbase.Plo
> > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -
> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -MP
> -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
> > depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> Wall -Werror -fno-strict-aliasing -I./include  -
> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
> wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
> wd_mempool.c &&\
> > mv -f $depbase.Tpo $depbase.Plo
> > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -
> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
> wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -fPIC
> -DPIC -o .libs/wd_mempool.o
> > depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> Wall -Werror -fno-strict-aliasing -I./include  -
> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -MD
> -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
> > mv -f $depbase.Tpo $depbase.Plo
> > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-aliasing -
> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -MD -
> MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
> > In file included from v1/wd.c:30:
> > ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
> compiling"
> >    354 | #error "no platform mb, define one before compiling"
> >        |  ^~~~~
> > make[2]: *** [Makefile:788: v1/wd.lo] Error 1
> > make[2]: Leaving directory '/home/gakhil/up/uadk'
> > make[1]: *** [Makefile:859: all-recursive] Error 1
> > make[1]: Leaving directory '/home/gakhil/up/uadk'
> > make: *** [Makefile:565: all] Error 2
> By the way, what platform are you using.
> I can not reproduce this error.
> 
I am compiling on Intel XEON server with ubuntu 18.04
Akhil Goyal Oct. 11, 2022, 9:22 a.m. UTC | #4
> > > gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
> > > make  all-recursive
> > > make[1]: Entering directory '/home/gakhil/up/uadk'
> > > Making all in .
> > > make[2]: Entering directory '/home/gakhil/up/uadk'
> > > depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> > Wall -Werror -fno-strict-aliasing -I./include  -
> > DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -
> > MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
> > > mv -f $depbase.Tpo $depbase.Plo
> > > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> aliasing -
> > I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -
> MP
> > -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
> > > depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> > Wall -Werror -fno-strict-aliasing -I./include  -
> > DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
> > wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
> > wd_mempool.c &&\
> > > mv -f $depbase.Tpo $depbase.Plo
> > > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> aliasing -
> > I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
> > wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -
> fPIC
> > -DPIC -o .libs/wd_mempool.o
> > > depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > > /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
> > Wall -Werror -fno-strict-aliasing -I./include  -
> > DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -
> MD
> > -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
> > > mv -f $depbase.Tpo $depbase.Plo
> > > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> aliasing -
> > I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -
> MD -
> > MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
> > > In file included from v1/wd.c:30:
> > > ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
> > compiling"
> > >    354 | #error "no platform mb, define one before compiling"
> > >        |  ^~~~~
> > > make[2]: *** [Makefile:788: v1/wd.lo] Error 1
> > > make[2]: Leaving directory '/home/gakhil/up/uadk'
> > > make[1]: *** [Makefile:859: all-recursive] Error 1
> > > make[1]: Leaving directory '/home/gakhil/up/uadk'
> > > make: *** [Makefile:565: all] Error 2
> > By the way, what platform are you using.
> > I can not reproduce this error.
> >
> I am compiling on Intel XEON server with ubuntu 18.04

Any update??
Zhangfei Gao Oct. 11, 2022, 9:58 a.m. UTC | #5
Hi, Akhil

On 2022/10/11 下午5:22, Akhil Goyal wrote:
>>>> gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
>>>> make  all-recursive
>>>> make[1]: Entering directory '/home/gakhil/up/uadk'
>>>> Making all in .
>>>> make[2]: Entering directory '/home/gakhil/up/uadk'
>>>> depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -
>>> MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -
>> MP
>>> -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
>>>> depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
>>> wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
>>> wd_mempool.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
>>> wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -
>> fPIC
>>> -DPIC -o .libs/wd_mempool.o
>>>> depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -
>> MD
>>> -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -
>> MD -
>>> MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
>>>> In file included from v1/wd.c:30:
>>>> ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
>>> compiling"
>>>>     354 | #error "no platform mb, define one before compiling"
>>>>         |  ^~~~~
>>>> make[2]: *** [Makefile:788: v1/wd.lo] Error 1
>>>> make[2]: Leaving directory '/home/gakhil/up/uadk'
>>>> make[1]: *** [Makefile:859: all-recursive] Error 1
>>>> make[1]: Leaving directory '/home/gakhil/up/uadk'
>>>> make: *** [Makefile:565: all] Error 2
>>> By the way, what platform are you using.
>>> I can not reproduce this error.
>>>
>> I am compiling on Intel XEON server with ubuntu 18.04
> Any update??

Looks the uadk library only considers ARM local build for some time.
I am in checking how to cross-compile on x86.
Sorry for the inconvenience.

Thanks
Zhangfei Gao Oct. 14, 2022, 3:03 a.m. UTC | #6
Hi, Akhil

On 2022/10/11 下午5:22, Akhil Goyal wrote:
>>>> gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
>>>> make  all-recursive
>>>> make[1]: Entering directory '/home/gakhil/up/uadk'
>>>> Making all in .
>>>> make[2]: Entering directory '/home/gakhil/up/uadk'
>>>> depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -MD -
>>> MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD -
>> MP
>>> -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
>>>> depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
>>> wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
>>> wd_mempool.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
>>> wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -
>> fPIC
>>> -DPIC -o .libs/wd_mempool.o
>>>> depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -
>>> Wall -Werror -fno-strict-aliasing -I./include  -
>>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
>>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo -
>> MD
>>> -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
>>>> mv -f $depbase.Tpo $depbase.Plo
>>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
>> aliasing -
>>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
>>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -
>> MD -
>>> MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
>>>> In file included from v1/wd.c:30:
>>>> ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
>>> compiling"
>>>>     354 | #error "no platform mb, define one before compiling"
>>>>         |  ^~~~~
>>>> make[2]: *** [Makefile:788: v1/wd.lo] Error 1
>>>> make[2]: Leaving directory '/home/gakhil/up/uadk'
>>>> make[1]: *** [Makefile:859: all-recursive] Error 1
>>>> make[1]: Leaving directory '/home/gakhil/up/uadk'
>>>> make: *** [Makefile:565: all] Error 2
>>> By the way, what platform are you using.
>>> I can not reproduce this error.
>>>
>> I am compiling on Intel XEON server with ubuntu 18.04
> Any update??
The uadk lib needs cross-compile on x86.
Toolchain: 
https://releases.linaro.org/components/toolchain/binaries/latest-7/aarch64-linux-gnu/
Details are documented in https://github.com/Linaro/uadk/blob/master/INSTALL

Considering the confusion caused by simple build info in README,
We are planning to remove the simple build step in README, only keeps 
INSTALL.
https://github.com/Linaro/uadk/pull/510

Since there are some dependent libraries (libz & openssl) causes 
cross-compile complicated.
We are planning to omit build tests if not found these libs
https://github.com/Linaro/uadk/pull/508

Only libnuma is must required for lib.
Fortunately the numa cross compile is simple

https://github.com/Linaro/uadk/blob/master/INSTALL
     $git clone https://github.com/numactl/numactl.git
     $cd numactl
     $./autogen.sh
     $autoconf -i
     $CC=aarch64-linux-gnu-gcc ./configure --host=i386-linux-gnu 
--target=aarch64-linux-gnu --prefix=${LIBROOT}/usr/local
     $make
     $make install

Do you think we still need paste uadk build steps (and cross-compile steps)
on dpdk doc/guides/cryptodevs/uadk.rst

Sorry for the confusion.

Thanks
Akhil Goyal Oct. 14, 2022, 11:28 a.m. UTC | #7
Hi Zhangfei,
> Hi, Akhil
> 
> On 2022/10/11 下午5:22, Akhil Goyal wrote:
> >>>> gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
> >>>> make  all-recursive
> >>>> make[1]: Entering directory '/home/gakhil/up/uadk'
> >>>> Making all in .
> >>>> make[2]: Entering directory '/home/gakhil/up/uadk'
> >>>> depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
> -
> >>> Wall -Werror -fno-strict-aliasing -I./include  -
> >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -
> MD -
> >>> MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
> >>>> mv -f $depbase.Tpo $depbase.Plo
> >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> >> aliasing -
> >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -MD
> -
> >> MP
> >>> -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
> >>>> depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
> -
> >>> Wall -Werror -fno-strict-aliasing -I./include  -
> >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
> >>> wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
> >>> wd_mempool.c &&\
> >>>> mv -f $depbase.Tpo $depbase.Plo
> >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> >> aliasing -
> >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
> >>> wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c  -
> >> fPIC
> >>> -DPIC -o .libs/wd_mempool.o
> >>>> depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
> -
> >>> Wall -Werror -fno-strict-aliasing -I./include  -
> >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT v1/wd.lo
> -
> >> MD
> >>> -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
> >>>> mv -f $depbase.Tpo $depbase.Plo
> >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> >> aliasing -
> >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo -
> >> MD -
> >>> MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
> >>>> In file included from v1/wd.c:30:
> >>>> ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
> >>> compiling"
> >>>>     354 | #error "no platform mb, define one before compiling"
> >>>>         |  ^~~~~
> >>>> make[2]: *** [Makefile:788: v1/wd.lo] Error 1
> >>>> make[2]: Leaving directory '/home/gakhil/up/uadk'
> >>>> make[1]: *** [Makefile:859: all-recursive] Error 1
> >>>> make[1]: Leaving directory '/home/gakhil/up/uadk'
> >>>> make: *** [Makefile:565: all] Error 2
> >>> By the way, what platform are you using.
> >>> I can not reproduce this error.
> >>>
> >> I am compiling on Intel XEON server with ubuntu 18.04
> > Any update??
> The uadk lib needs cross-compile on x86.
> Toolchain:
> https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__releases.linaro.org_components_toolchain_binaries_latest-2D7_aarch64-
> 2Dlinux-
> 2Dgnu_&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey
> 3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DE
> o6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=2-
> jhckUNn9LCXbLaFaAEdl_5seC82SCXxvkVQEPnNz0&e=
> Details are documented in https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk_blob_master_INSTALL&d=DwIDaQ&c=nKjWec2b
> 6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m
> =91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9
> Q8&s=pyjDRDPApEQXxPjZ4q0QlXT5DgmAAYdZtNscFbRp8lk&e=
> 
> Considering the confusion caused by simple build info in README,
> We are planning to remove the simple build step in README, only keeps
> INSTALL.
> https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk_pull_510&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7x
> tfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=m6I26
> VelKVBjODnByclMKGtmaSEN2kv8ACeZsWbPTg4&e=
> 
> Since there are some dependent libraries (libz & openssl) causes
> cross-compile complicated.
> We are planning to omit build tests if not found these libs
> https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk_pull_508&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7x
> tfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=tcbWSI
> hyL8b2mX4-Ta54bR4kH2fNkezlmVD24I09mTc&e=
> 
> Only libnuma is must required for lib.
> Fortunately the numa cross compile is simple
> 
> https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk_blob_master_INSTALL&d=DwIDaQ&c=nKjWec2b
> 6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m
> =91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9
> Q8&s=pyjDRDPApEQXxPjZ4q0QlXT5DgmAAYdZtNscFbRp8lk&e=
>      $git clone https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_numactl_numactl.git&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xt
> fQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=hZdhP
> WLMGMgV9tP7nEQY1G_iWnODYJMCfR41whWchSU&e=
>      $cd numactl
>      $./autogen.sh
>      $autoconf -i
>      $CC=aarch64-linux-gnu-gcc ./configure --host=i386-linux-gnu
> --target=aarch64-linux-gnu --prefix=${LIBROOT}/usr/local
>      $make
>      $make install
> 
> Do you think we still need paste uadk build steps (and cross-compile steps)
> on dpdk doc/guides/cryptodevs/uadk.rst
> 
Is it not possible to use pkg-config?

Also while building on DPDK which config file is needed?
Do you need that also to be cross compiled?
Akhil Goyal Oct. 14, 2022, 12:02 p.m. UTC | #8
> Hi Zhangfei,
> > Hi, Akhil
> >
> > On 2022/10/11 下午5:22, Akhil Goyal wrote:
> > >>>> gakhil@cavium-SR1-T640:/home/gakhil/up/uadk$ make
> > >>>> make  all-recursive
> > >>>> make[1]: Entering directory '/home/gakhil/up/uadk'
> > >>>> Making all in .
> > >>>> make[2]: Entering directory '/home/gakhil/up/uadk'
> > >>>> depbase=`echo wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -
> I.
> > -
> > >>> Wall -Werror -fno-strict-aliasing -I./include  -
> > >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT wd.lo -
> > MD -
> > >>> MP -MF $depbase.Tpo -c -o wd.lo wd.c &&\
> > >>>> mv -f $depbase.Tpo $depbase.Plo
> > >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> > >> aliasing -
> > >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT wd.lo -
> MD
> > -
> > >> MP
> > >>> -MF .deps/wd.Tpo -c wd.c  -fPIC -DPIC -o .libs/wd.o
> > >>>> depbase=`echo wd_mempool.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -
> I.
> > -
> > >>> Wall -Werror -fno-strict-aliasing -I./include  -
> > >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
> > >>> wd_mempool.lo -MD -MP -MF $depbase.Tpo -c -o wd_mempool.lo
> > >>> wd_mempool.c &&\
> > >>>> mv -f $depbase.Tpo $depbase.Plo
> > >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> > >> aliasing -
> > >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT
> > >>> wd_mempool.lo -MD -MP -MF .deps/wd_mempool.Tpo -c wd_mempool.c
> -
> > >> fPIC
> > >>> -DPIC -o .libs/wd_mempool.o
> > >>>> depbase=`echo v1/wd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> > >>>> /bin/bash ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -
> I.
> > -
> > >>> Wall -Werror -fno-strict-aliasing -I./include  -
> > >>> DUADK_VERSION_NUMBER="\"UADK version: 2.3.37\"" -
> > >>> DUADK_RELEASED_TIME="\"Released Jun 11, 2022\""  -g -O2 -MT
> v1/wd.lo
> > -
> > >> MD
> > >>> -MP -MF $depbase.Tpo -c -o v1/wd.lo v1/wd.c &&\
> > >>>> mv -f $depbase.Tpo $depbase.Plo
> > >>>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -Werror -fno-strict-
> > >> aliasing -
> > >>> I./include "-DUADK_VERSION_NUMBER=\"UADK version: 2.3.37\"" "-
> > >>> DUADK_RELEASED_TIME=\"Released Jun 11, 2022\"" -g -O2 -MT v1/wd.lo
> -
> > >> MD -
> > >>> MP -MF v1/.deps/wd.Tpo -c v1/wd.c  -fPIC -DPIC -o v1/.libs/wd.o
> > >>>> In file included from v1/wd.c:30:
> > >>>> ./v1/wd_util.h:354:2: error: #error "no platform mb, define one before
> > >>> compiling"
> > >>>>     354 | #error "no platform mb, define one before compiling"
> > >>>>         |  ^~~~~
> > >>>> make[2]: *** [Makefile:788: v1/wd.lo] Error 1
> > >>>> make[2]: Leaving directory '/home/gakhil/up/uadk'
> > >>>> make[1]: *** [Makefile:859: all-recursive] Error 1
> > >>>> make[1]: Leaving directory '/home/gakhil/up/uadk'
> > >>>> make: *** [Makefile:565: all] Error 2
> > >>> By the way, what platform are you using.
> > >>> I can not reproduce this error.
> > >>>
> > >> I am compiling on Intel XEON server with ubuntu 18.04
> > > Any update??
> > The uadk lib needs cross-compile on x86.
> > Toolchain:
> > https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__releases.linaro.org_components_toolchain_binaries_latest-
> 2D7_aarch64-
> > 2Dlinux-
> >
> 2Dgnu_&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey
> >
> 3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DE
> > o6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=2-
> > jhckUNn9LCXbLaFaAEdl_5seC82SCXxvkVQEPnNz0&e=
> > Details are documented in https://urldefense.proofpoint.com/v2/url?u=https-
> >
> 3A__github.com_Linaro_uadk_blob_master_INSTALL&d=DwIDaQ&c=nKjWec2b
> >
> 6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m
> >
> =91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9
> > Q8&s=pyjDRDPApEQXxPjZ4q0QlXT5DgmAAYdZtNscFbRp8lk&e=
> >
> > Considering the confusion caused by simple build info in README,
> > We are planning to remove the simple build step in README, only keeps
> > INSTALL.
> > https://urldefense.proofpoint.com/v2/url?u=https-
> >
> 3A__github.com_Linaro_uadk_pull_510&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7x
> >
> tfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> >
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=m6I26
> > VelKVBjODnByclMKGtmaSEN2kv8ACeZsWbPTg4&e=
> >
> > Since there are some dependent libraries (libz & openssl) causes
> > cross-compile complicated.
> > We are planning to omit build tests if not found these libs
> > https://urldefense.proofpoint.com/v2/url?u=https-
> >
> 3A__github.com_Linaro_uadk_pull_508&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7x
> >
> tfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> >
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=tcbWSI
> > hyL8b2mX4-Ta54bR4kH2fNkezlmVD24I09mTc&e=
> >
> > Only libnuma is must required for lib.
> > Fortunately the numa cross compile is simple
> >
> > https://urldefense.proofpoint.com/v2/url?u=https-
> >
> 3A__github.com_Linaro_uadk_blob_master_INSTALL&d=DwIDaQ&c=nKjWec2b
> >
> 6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m
> >
> =91MX2Cs8jDO3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9
> > Q8&s=pyjDRDPApEQXxPjZ4q0QlXT5DgmAAYdZtNscFbRp8lk&e=
> >      $git clone https://urldefense.proofpoint.com/v2/url?u=https-
> >
> 3A__github.com_numactl_numactl.git&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xt
> >
> fQ&r=DnL7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=91MX2Cs8jD
> >
> O3kZ8m02cjnNdNxbSoW7V9DEo6KPhTRzdWILxa_DQzYPoa5c5Lq9Q8&s=hZdhP
> > WLMGMgV9tP7nEQY1G_iWnODYJMCfR41whWchSU&e=
> >      $cd numactl
> >      $./autogen.sh
> >      $autoconf -i
> >      $CC=aarch64-linux-gnu-gcc ./configure --host=i386-linux-gnu
> > --target=aarch64-linux-gnu --prefix=${LIBROOT}/usr/local
> >      $make
> >      $make install
> >
> > Do you think we still need paste uadk build steps (and cross-compile steps)
> > on dpdk doc/guides/cryptodevs/uadk.rst
> >
> Is it not possible to use pkg-config?
> 
> Also while building on DPDK which config file is needed?
> Do you need that also to be cross compiled?

And even if I do manual copy of numa(lib and headers) in the toolchain (which I believe should not be done).

I still see issues in installing uadk.
It does not allow to install in a directory and does not make a pkgconfig file which can be used by DPDK to build the crypto driver.
 Please check how other PMDs are doing with external libs.
In DPDK, we take external dependent libs via pkg-config only.