From patchwork Sat Feb 2 17:25:52 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Haojian Zhuang X-Patchwork-Id: 14430 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id 0BD2B23F96 for ; Sat, 2 Feb 2013 17:29:12 +0000 (UTC) Received: from mail-vc0-f174.google.com (mail-vc0-f174.google.com [209.85.220.174]) by fiordland.canonical.com (Postfix) with ESMTP id 8725BA180A7 for ; Sat, 2 Feb 2013 17:29:11 +0000 (UTC) Received: by mail-vc0-f174.google.com with SMTP id n11so3043578vch.19 for ; Sat, 02 Feb 2013 09:29:11 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:x-forwarded-to:x-forwarded-for:delivered-to:x-received :received-spf:x-received:from:to:cc:subject:date:message-id:x-mailer :in-reply-to:references:x-gm-message-state; bh=N40n/gb+2d+8aErEz8ExDepTFY0nQyod93zcQzdvJb8=; b=lpQhQatm2SY87u/Xo8rs56tctifLvBTmw6IF9LQzo5Jkw396fKAWvvhE7LSsxwkvo5 wWtmPo0nl+PCNoa+BNTwChIRRW8CmwTImkRyZcQshZC1dS3++vvO9MnZyLdKCm+6ABrv 2ElkJNke/2D/viQAUTG/fCKH1nw/VrmZ+eD9sJKCwWqXFaAzFuv37TGwjkK1fXvJrMCp sf4Wjj+cUi4i4KHymvRua2Vd27o2f8E8b+rzpnXO68+Sngsdig9gmQ1KToYTCRJ5+JV8 M3eUjCSGKyPJkyQy0YJUdNAI6FNn9aLngxqm44vwBRFx2hi/32qmaUAI7y5Bo1oIMcTv rafA== X-Received: by 10.58.231.196 with SMTP id ti4mr11021048vec.25.1359826151040; Sat, 02 Feb 2013 09:29:11 -0800 (PST) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.58.252.8 with SMTP id zo8csp16902vec; Sat, 2 Feb 2013 09:29:10 -0800 (PST) X-Received: by 10.66.73.138 with SMTP id l10mr39288968pav.44.1359826149687; Sat, 02 Feb 2013 09:29:09 -0800 (PST) Received: from mail-pa0-f54.google.com (mail-pa0-f54.google.com [209.85.220.54]) by mx.google.com with ESMTPS id it4si4754425pbc.164.2013.02.02.09.29.09 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Sat, 02 Feb 2013 09:29:09 -0800 (PST) Received-SPF: neutral (google.com: 209.85.220.54 is neither permitted nor denied by best guess record for domain of haojian.zhuang@linaro.org) client-ip=209.85.220.54; Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.220.54 is neither permitted nor denied by best guess record for domain of haojian.zhuang@linaro.org) smtp.mail=haojian.zhuang@linaro.org Received: by mail-pa0-f54.google.com with SMTP id fa10so1056981pad.27 for ; Sat, 02 Feb 2013 09:29:09 -0800 (PST) X-Received: by 10.66.79.136 with SMTP id j8mr39334919pax.29.1359826149016; Sat, 02 Feb 2013 09:29:09 -0800 (PST) Received: from localhost.localdomain ([27.115.121.35]) by mx.google.com with ESMTPS id b3sm10434040pax.14.2013.02.02.09.29.01 (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Sat, 02 Feb 2013 09:29:08 -0800 (PST) From: Haojian Zhuang To: shiraz.hashim@st.com, shiraz.linux.kernel@gmail.com, linux@arm.linux.org.uk, tony@atomide.com, linux-arm-kernel@lists.infradead.org, swarren@nvidia.com Cc: patches@linaro.org, Haojian Zhuang Subject: [PATCH v8 11/12] ARM: hs: enable hi4511 with device tree Date: Sun, 3 Feb 2013 01:25:52 +0800 Message-Id: <1359825953-15663-12-git-send-email-haojian.zhuang@linaro.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1359825953-15663-1-git-send-email-haojian.zhuang@linaro.org> References: <1359825953-15663-1-git-send-email-haojian.zhuang@linaro.org> X-Gm-Message-State: ALoCoQlhyBE125PngP1VGT5ReIrwaYmaDJr0pMGIZ+tuazEd0+pC8MUWkZKzHcso0Ny6vdPn/O+6 Enable Hisilicon Hi4511 development platform with device tree support. Signed-off-by: Haojian Zhuang --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hi3620.dtsi | 556 +++++++++++++++++++++++++++++ arch/arm/boot/dts/hi4511.dts | 772 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1329 insertions(+) create mode 100644 arch/arm/boot/dts/hi3620.dtsi create mode 100644 arch/arm/boot/dts/hi4511.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ea2c272..2a22336 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb +dtb-$(CONFIG_ARCH_HS) += hi4511.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi new file mode 100644 index 0000000..547a93b --- /dev/null +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -0,0 +1,556 @@ +/* + * Hisilicon Ltd. Hi3620 SoC + * + * Copyright (C) 2012-2013 Linaro Ltd. + * Author: Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&intc>; + ranges; + + osc32k: osc@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc32khz"; + }; + + osc26m: osc@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "osc26mhz"; + }; + + pclk: clk@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "apb_pclk"; + }; + + timclk0: clk@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <60000000>; + clock-output-names = "timer0"; + }; + + timclk1: clk@2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <60000000>; + clock-output-names = "timer1"; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xfc10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + intc: interrupt-controller@fc001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xfc001000 0x1000>, <0xfc000100 0x100>; + }; + + timer0: timer@fc800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfc800000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 0 4>, <0 1 4>; + clocks = <&timclk0 &timclk1 &pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; + status = "disabled"; + }; + + timer1: timer@fc801000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfc801000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 2 4>, <0 3 4>; + clocks = <&timclk0 &timclk1 &pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; + status = "disabled"; + }; + + timer2: timer@fca01000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfca01000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 4 4>, <0 5 4>; + clocks = <&timclk0 &timclk1 &pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; + status = "disabled"; + }; + + timer3: timer@fca02000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfca02000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 6 4>, <0 7 4>; + clocks = <&timclk0 &timclk1 &pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; + status = "disabled"; + }; + + timer4: timer@fca03000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfca03000 0x1000>; + /* timer40 & timer41 */ + interrupts = <0 96 4>, <0 97 4>; + clocks = <&timclk0 &timclk1 &pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; + status = "disabled"; + }; + + uart0: uart@fcb00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfcb00000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@fcb01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfcb01000 0x1000>; + interrupts = <0 21 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@fcb02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfcb02000 0x1000>; + interrupts = <0 22 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@fcb03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfcb03000 0x1000>; + interrupts = <0 23 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@fcb04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfcb04000 0x1000>; + interrupts = <0 24 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio0: gpio@fc806000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc806000 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1 + &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio1: gpio@fc807000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc807000 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1 + &pmx0 6 5 1 &pmx0 7 6 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio2: gpio@fc808000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc808000 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1 + &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1 + &pmx0 6 3 1 &pmx0 7 3 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio3: gpio@fc809000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc809000 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1 + &pmx0 6 11 1 &pmx0 7 11 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio4: gpio@fc80a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80a000 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1 + &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1 + &pmx0 6 13 1 &pmx0 7 13 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio5: gpio@fc80b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80b000 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1 + &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1 + &pmx0 6 16 1 &pmx0 7 16 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio6: gpio@fc80c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80c000 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1 + &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1 + &pmx0 6 18 1 &pmx0 7 19 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio7: gpio@fc80d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80d000 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1 + &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1 + &pmx0 6 25 1 &pmx0 7 26 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio8: gpio@fc80e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80e000 0x1000>; + interrupts = <0 72 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1 + &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1 + &pmx0 6 33 1 &pmx0 7 34 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio9: gpio@fc80f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc80f000 0x1000>; + interrupts = <0 73 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1 + &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1 + &pmx0 6 41 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio10: gpio@fc810000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc810000 0x1000>; + interrupts = <0 74 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1 + &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio11: gpio@fc811000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc811000 0x1000>; + interrupts = <0 75 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1 + &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1 + &pmx0 6 49 1 &pmx0 7 49 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio12: gpio@fc812000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc812000 0x1000>; + interrupts = <0 76 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1 + &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1 + &pmx0 6 51 1 &pmx0 7 52 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio13: gpio@fc813000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc813000 0x1000>; + interrupts = <0 77 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1 + &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1 + &pmx0 6 55 1 &pmx0 7 56 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio14: gpio@fc814000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc814000 0x1000>; + interrupts = <0 78 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1 + &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1 + &pmx0 6 60 1 &pmx0 7 61 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio15: gpio@fc815000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc815000 0x1000>; + interrupts = <0 79 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1 + &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1 + &pmx0 6 64 1 &pmx0 7 65 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio16: gpio@fc816000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc816000 0x1000>; + interrupts = <0 80 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1 + &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1 + &pmx0 6 72 1 &pmx0 7 73 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio17: gpio@fc817000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc817000 0x1000>; + interrupts = <0 81 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1 + &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1 + &pmx0 6 80 1 &pmx0 7 81 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio18: gpio@fc818000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc818000 0x1000>; + interrupts = <0 82 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1 + &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1 + &pmx0 6 86 1 &pmx0 7 87 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio19: gpio@fc819000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc819000 0x1000>; + interrupts = <0 83 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1 + &pmx0 3 88 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio20: gpio@fc81a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc81a000 0x1000>; + interrupts = <0 84 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1 + &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + gpio21: gpio@fc81b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc81b000 0x1000>; + interrupts = <0 85 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + pmx0: pinmux@fc803000 { + compatible = "pinctrl-single"; + reg = <0xfc803000 0x188>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 + &range 12 1 0 &range 13 29 1 + &range 43 1 0 &range 44 49 1 + &range 94 1 1 &range 96 2 1>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@fc803800 { + compatible = "pinconf-single"; + reg = <0xfc803800 0x2dc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pinctrl-single,register-width = <32>; + }; + }; +}; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts new file mode 100644 index 0000000..f10b28f --- /dev/null +++ b/arch/arm/boot/dts/hi4511.dts @@ -0,0 +1,772 @@ +/* + * Copyright (C) 2012-2013 Linaro Ltd. + * Author: Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "hi3620.dtsi" + +/ { + model = "Hisilicon Hi4511 Development Board"; + compatible = "hisilicon,hi3620-hi4511"; + + chosen { + bootargs = "console=ttyAMA0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on mem=512m earlyprintk"; + }; + + memory { + reg = <0x00000000 0x20000000>; + }; + + amba { + timer0: timer@fc800000 { + status = "ok"; + }; + + uart0: uart@fcb00000 { /* console */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; + status = "ok"; + }; + + uart1: uart@fcb01000 { /* modem */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; + status = "ok"; + }; + + uart2: uart@fcb02000 { /* audience */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; + status = "ok"; + }; + + uart3: uart@fcb03000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; + status = "ok"; + }; + + uart4: uart@fcb04000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; + status = "ok"; + }; + + gpio0: gpio@fc806000 { + status = "ok"; + }; + + gpio1: gpio@fc807000 { + status = "ok"; + }; + + gpio2: gpio@fc808000 { + status = "ok"; + }; + + gpio3: gpio@fc809000 { + status = "ok"; + }; + + gpio4: gpio@fc80a000 { + status = "ok"; + }; + + gpio5: gpio@fc80b000 { + status = "ok"; + }; + + gpio6: gpio@fc80c000 { + status = "ok"; + }; + + gpio7: gpio@fc80d000 { + status = "ok"; + }; + + gpio8: gpio@fc80e000 { + status = "ok"; + }; + + gpio9: gpio@fc80f000 { + status = "ok"; + }; + + gpio10: gpio@fc810000 { + status = "ok"; + }; + + gpio11: gpio@fc811000 { + status = "ok"; + }; + + gpio12: gpio@fc812000 { + status = "ok"; + }; + + gpio13: gpio@fc813000 { + status = "ok"; + }; + + gpio14: gpio@fc814000 { + status = "ok"; + }; + + gpio15: gpio@fc815000 { + status = "ok"; + }; + + gpio16: gpio@fc816000 { + status = "ok"; + }; + + gpio17: gpio@fc817000 { + status = "ok"; + }; + + gpio18: gpio@fc818000 { + status = "ok"; + }; + + gpio19: gpio@fc819000 { + status = "ok"; + }; + + gpio20: gpio@fc81a000 { + status = "ok"; + }; + + gpio21: gpio@fc81b000 { + status = "ok"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + call { + label = "call"; + gpios = <&gpio17 2 0>; + linux,code = <169>; /* KEY_PHONE */ + }; + }; + + pmx0: pinmux@fc803000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func>; + + board_pmx_pins: pinmux_board_pmx_pins { + pinctrl-single,pins = < + 0x008 0x0 /* GPIO -- eFUSE_DOUT */ + 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ + 0x104 0x0 /* USIM_RST (IOMG96) */ + >; + }; + sd_pmx_pins: pinmux_sd_pins { + pinctrl-single,pins = < + 0x0bc 0x0 /* SD_CLK, SD_CMD, SD_DATA[0:2] */ + >; + }; + uart0_pmx_func: pinmux_uart0_pins@0 { + pinctrl-single,pins = < + 0x0f0 0x0 + 0x0f4 0x0 /* UART0_RX & UART0_TX */ + >; + }; + uart0_pmx_idle: pinmux_uart0_pins@1 { + pinctrl-single,pins = < + /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ + 0x0f4 0x1 /* UART0_RX & UART0_TX */ + >; + }; + uart1_pmx_func: pinmux_uart1_pins@0 { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ + 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ + >; + }; + uart1_pmx_idle: pinmux_uart1_pins@1 { + pinctrl-single,pins = < + 0x0f8 0x1 /* GPIO (IOMG61) */ + 0x0fc 0x1 /* GPIO (IOMG62) */ + >; + }; + uart2_pmx_func: pinmux_uart2_pins@0 { + pinctrl-single,pins = < + 0x104 0x2 /* UART2_RXD (IOMG96) */ + 0x108 0x2 /* UART2_TXD (IOMG64) */ + >; + }; + uart2_pmx_idle: pinmux_uart2_pins@1 { + pinctrl-single,pins = < + 0x104 0x1 /* GPIO (IOMG96) */ + 0x108 0x1 /* GPIO (IOMG64) */ + >; + }; + uart3_pmx_func: pinmux_uart3_pins@0 { + pinctrl-single,pins = < + 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ + 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ + >; + }; + uart3_pmx_idle: pinmux_uart3_pins@1 { + pinctrl-single,pins = < + 0x160 0x1 /* GPIO (IOMG85) */ + 0x164 0x1 /* GPIO (IOMG86) */ + >; + }; + uart4_pmx_func: pinmux_uart4_pins@0 { + pinctrl-single,pins = < + 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ + 0x16c 0x0 /* UART4_RXD (IOMG88) */ + 0x170 0x0 /* UART4_TXD (IOMG93) */ + >; + }; + uart4_pmx_idle: pinmux_uart4_pins@1 { + pinctrl-single,pins = < + 0x168 0x1 /* GPIO (IOMG87) */ + 0x16c 0x1 /* GPIO (IOMG88) */ + 0x170 0x1 /* GPIO (IOMG93) */ + >; + }; + i2c0_pmx_func: pinmux_i2c0_pins@0 { + pinctrl-single,pins = < + 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ + >; + }; + i2c0_pmx_idle: pinmux_i2c0_pins@1 { + pinctrl-single,pins = < + 0x0b4 0x1 /* GPIO (IOMG45) */ + >; + }; + i2c1_pmx_func: pinmux_i2c1_pins@0 { + pinctrl-single,pins = < + 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ + >; + }; + i2c1_pmx_idle: pinmux_i2c1_pins@1 { + pinctrl-single,pins = < + 0x0b8 0x1 /* GPIO (IOMG46) */ + >; + }; + i2c2_pmx_func: pinmux_i2c2_pins@0 { + pinctrl-single,pins = < + 0x068 0x0 /* I2C2_SCL (IOMG26) */ + 0x06c 0x0 /* I2C2_SDA (IOMG27) */ + >; + }; + i2c2_pmx_idle: pinmux_i2c2_pins@0 { + pinctrl-single,pins = < + 0x068 0x1 /* GPIO (IOMG26) */ + 0x06c 0x1 /* GPIO (IOMG27) */ + >; + }; + i2c3_pmx_func: pinmux_i2c3_pins@0 { + pinctrl-single,pins = < + 0x050 0x2 /* I2C3_SCL (IOMG20) */ + 0x054 0x2 /* I2C3_SDA (IOMG21) */ + >; + }; + i2c3_pmx_idle: pinmux_i2c3_pins@0 { + pinctrl-single,pins = < + 0x050 0x1 /* GPIO (IOMG20) */ + 0x054 0x1 /* GPIO (IOMG21) */ + >; + }; + spi0_pmx_func: pinmux_spi0_pins@0 { + pinctrl-single,pins = < + 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ + 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ + 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */ + 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */ + 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ + >; + }; + spi0_pmx_idle: pinmux_spi0_pins@1 { + pinctrl-single,pins = < + 0x0d4 0x1 /* GPIO (IOMG53) */ + 0x0d8 0x1 /* GPIO (IOMG54) */ + 0x0dc 0x1 /* GPIO (IOMG55) */ + 0x0e0 0x1 /* GPIO (IOMG56) */ + 0x0e4 0x1 /* GPIO (IOMG57) */ + >; + }; + spi1_pmx_func: pinmux_spi1_pins@0 { + pinctrl-single,pins = < + 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ + 0x0e8 0x0 /* SPI1_DO (IOMG58) */ + 0x0ec 0x0 /* SPI1_CS (IOMG95) */ + >; + }; + spi1_pmx_idle: pinmux_spi1_pins@1 { + pinctrl-single,pins = < + 0x184 0x1 /* GPIO (IOMG98) */ + 0x0e8 0x1 /* GPIO (IOMG58) */ + 0x0ec 0x1 /* GPIO (IOMG95) */ + >; + }; + kpc_pmx_func: pinmux_kpc_pins@0 { + pinctrl-single,pins = < + 0x12c 0x0 /* KEY_IN0 (IOMG73) */ + 0x130 0x0 /* KEY_IN1 (IOMG74) */ + 0x134 0x0 /* KEY_IN2 (IOMG75) */ + 0x10c 0x0 /* KEY_OUT0 (IOMG65) */ + 0x110 0x0 /* KEY_OUT1 (IOMG66) */ + 0x114 0x0 /* KEY_OUT2 (IOMG67) */ + >; + }; + kpc_pmx_idle: pinmux_kpc_pins@1 { + pinctrl-single,pins = < + 0x12c 0x1 /* GPIO (IOMG73) */ + 0x130 0x1 /* GPIO (IOMG74) */ + 0x134 0x1 /* GPIO (IOMG75) */ + 0x10c 0x1 /* GPIO (IOMG65) */ + 0x110 0x1 /* GPIO (IOMG66) */ + 0x114 0x1 /* GPIO (IOMG67) */ + >; + }; + gpio_key_func: pinmux_gpiokey_pins { + pinctrl-single,pins = < + 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ + 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ + >; + }; + emmc_pmx_func: pinmux_emmc_pins@0 { + pinctrl-single,pins = < + 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ + >; + }; + emmc_pmx_idle: pinmux_emmc_pins@1 { + pinctrl-single,pins = < + 0x030 0x0 /* GPIO (IOMG12) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sd_pmx_func: pinmux_sd_pins@0 { + pinctrl-single,pins = < + 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ + 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ + >; + }; + sd_pmx_idle: pinmux_sd_pins@1 { + pinctrl-single,pins = < + 0x0bc 0x1 /* GPIO (IOMG47) */ + 0x0c0 0x1 /* GPIO (IOMG48) */ + >; + }; + nand_pmx_func: pinmux_nand_pins@0 { + pinctrl-single,pins = < + 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ + 0x010 0x0 /* NAND_CS1_N (IOMG4) */ + 0x014 0x0 /* NAND_CS2_N (IOMG5) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */ + 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ + >; + }; + nand_pmx_idle: pinmux_nand_pins@1 { + pinctrl-single,pins = < + 0x00c 0x1 /* GPIO (IOMG3) */ + 0x010 0x1 /* GPIO (IOMG4) */ + 0x014 0x1 /* GPIO (IOMG5) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x01c 0x1 /* GPIO (IOMG94) */ + 0x020 0x1 /* GPIO (IOMG7) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sdio_pmx_func: pinmux_sdio_pins@0 { + pinctrl-single,pins = < + 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ + >; + }; + sdio_pmx_idle: pinmux_sdio_pins@1 { + pinctrl-single,pins = < + 0x0c4 0x1 /* GPIO (IOMG49) */ + >; + }; + audio_out_pmx_func: pinmux_audio_pins@0 { + pinctrl-single,pins = < + 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ + >; + }; + }; + + pmx1: pinmux@fc803800 { + pinctrl-names = "default"; + pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins + &board_np_pins &board_ps_pins &kpc_cfg_func + &audio_out_cfg_func>; + board_pu_pins: pinmux_board_pu_pins { + pinctrl-single,pins = < + 0x014 0 /* GPIO_158 (IOCFG2) */ + 0x018 0 /* GPIO_159 (IOCFG3) */ + 0x01c 0 /* BOOT_MODE0 (IOCFG4) */ + 0x020 0 /* BOOT_MODE1 (IOCFG5) */ + >; + pinctrl-single,bias-pullup = <1 1 1>; + pinctrl-single,bias-disable = <1 0 1>; + }; + board_pd_pins: pinmux_board_pd_pins { + pinctrl-single,pins = < + 0x038 0 /* eFUSE_DOUT (IOCFG11) */ + 0x150 0 /* ISP_GPIO8 (IOCFG93) */ + 0x154 0 /* ISP_GPIO9 (IOCFG94) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + board_pd_ps_pins: pinmux_board_pd_ps_pins { + pinctrl-single,pins = < + 0x220 0 /* USIM_CLK (IOCFG144) */ + 0x224 0 /* USIM_DATA (IOCFG145) */ + 0x228 0 /* USIM_RST (IOCFG146) */ + 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ + 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + board_np_pins: pinmux_board_np_pins { + pinctrl-single,pins = < + 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + board_ps_pins: pinmux_board_ps_pins { + pinctrl-single,pins = < + 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ + 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ + >; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + uart0_cfg_func: pinmux_uart0_pins@2 { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + uart0_cfg_idle: pinmux_uart0_pins@3 { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + uart1_cfg_func: pinmux_uart1_pins@2 { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + uart1_cfg_idle: pinmux_uart1_pins@3 { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + uart2_cfg_func: pinmux_uart2_pins@2 { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + uart2_cfg_idle: pinmux_uart2_pins@3 { + pinctrl-single,pins = < + 0x210 0 /* GPIO (IOCFG140) */ + 0x214 0 /* GPIO (IOCFG141) */ + 0x218 0 /* GPIO (IOCFG142) */ + 0x21c 0 /* GPIO (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + uart3_cfg_func: pinmux_uart3_pins@2 { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + uart3_cfg_idle: pinmux_uart3_pins@3 { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + uart4_cfg_func: pinmux_uart4_pins@2 { + pinctrl-single,pins = < + 0x2a4 0 /* UART4_CTS (IOCFG177) */ + 0x2a8 0 /* UART4_RTS (IOCFG178) */ + 0x2ac 0 /* UART4_RXD (IOCFG179) */ + 0x2b0 0 /* UART4_TXD (IOCFG180) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + }; + i2c0_cfg_func: pinmux_i2c0_pins@2 { + pinctrl-single,pins = < + 0x17c 0 /* I2C0_SCL (IOCFG103) */ + 0x180 0 /* I2C0_SDA (IOCFG104) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c1_cfg_func: pinmux_i2c1_pins@2 { + pinctrl-single,pins = < + 0x184 0 /* I2C1_SCL (IOCFG105) */ + 0x188 0 /* I2C1_SDA (IOCFG106) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c2_cfg_func: pinmux_i2c2_pins@2 { + pinctrl-single,pins = < + 0x118 0 /* I2C2_SCL (IOCFG79) */ + 0x11c 0 /* I2C2_SDA (IOCFG80) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c3_cfg_func: pinmux_i2c3_pins@2 { + pinctrl-single,pins = < + 0x100 0 /* I2C3_SCL (IOCFG73) */ + 0x104 0 /* I2C3_SDA (IOCFG74) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <0 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func1: pinmux_spi0_pins@2 { + pinctrl-single,pins = < + 0x1d4 0 /* SPI0_CLK (IOCFG125) */ + 0x1d8 0 /* SPI0_DI (IOCFG126) */ + 0x1dc 0 /* SPI0_DO (IOCFG127) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func2: pinmux_spi0_pins@3 { + pinctrl-single,pins = < + 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ + 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ + 0x1e8 0 /* SPI0_CS2 (IOCFG130 */ + 0x1ec 0 /* SPI0_CS3 (IOCFG131) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <1 1 1>; + pinctrl-single,bias-disable = <1 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func1: pinmux_spi1_pins@2 { + pinctrl-single,pins = < + 0x1f0 0 /* SPI1_CLK (IOCFG132) */ + 0x1f4 0 /* SPI1_DI (IOCFG133) */ + 0x1f8 0 /* SPI1_DO (IOCFG134) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func2: pinmux_spi1_pins@3 { + pinctrl-single,pins = < + 0x1fc 0 /* SPI1_CS (IOCFG135) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <1 1 1>; + pinctrl-single,bias-disable = <1 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + kpc_cfg_func: pinmux_kpc_pins@2 { + pinctrl-single,pins = < + 0x250 0 /* KEY_IN0 (IOCFG156) */ + 0x254 0 /* KEY_IN1 (IOCFG157) */ + 0x258 0 /* KEY_IN2 (IOCFG158) */ + 0x230 0 /* KEY_OUT0 (IOCFG148) */ + 0x234 0 /* KEY_OUT1 (IOCFG149) */ + 0x238 0 /* KEY_OUT2 (IOCFG150) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + emmc_cfg_func: pinmux_emmc_pins@2 { + pinctrl-single,pins = < + 0x0ac 0 /* eMMC_CMD (IOCFG40) */ + 0x0b0 0 /* eMMC_CLK (IOCFG41) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <1 1 1>; + pinctrl-single,bias-disable = <1 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func1: pinmux_sd_pins@2 { + pinctrl-single,pins = < + 0x18c 0 /* SD_CLK (IOCFG107) */ + 0x190 0 /* SD_CMD (IOCFG108) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func2: pinmux_sd_pins@3 { + pinctrl-single,pins = < + 0x194 0 /* SD_DATA0 (IOCFG109) */ + 0x198 0 /* SD_DATA1 (IOCFG110) */ + 0x19c 0 /* SD_DATA2 (IOCFG111) */ + 0x1a0 0 /* SD_DATA3 (IOCFG112) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x70 0xf0>; + }; + nand_cfg_func1: pinmux_nand_pins@2 { + pinctrl-single,pins = < + 0x03c 0 /* NAND_ALE (IOCFG12) */ + 0x040 0 /* NAND_CLE (IOCFG13) */ + 0x06c 0 /* NAND_DATA0 (IOCFG24) */ + 0x070 0 /* NAND_DATA1 (IOCFG25) */ + 0x074 0 /* NAND_DATA2 (IOCFG26) */ + 0x078 0 /* NAND_DATA3 (IOCFG27) */ + 0x07c 0 /* NAND_DATA4 (IOCFG28) */ + 0x080 0 /* NAND_DATA5 (IOCFG29) */ + 0x084 0 /* NAND_DATA6 (IOCFG30) */ + 0x088 0 /* NAND_DATA7 (IOCFG31) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + nand_cfg_func2: pinmux_nand_pins@3 { + pinctrl-single,pins = < + 0x044 0 /* NAND_RE_N (IOCFG14) */ + 0x048 0 /* NAND_WE_N (IOCFG15) */ + 0x04c 0 /* NAND_CS0_N (IOCFG16) */ + 0x050 0 /* NAND_CS1_N (IOCFG17) */ + 0x054 0 /* NAND_CS2_N (IOCFG18) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */ + 0x060 0 /* NAND_BUSY1_N (IOCFG21) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + >; + pinctrl-single,bias-pulldown = <0 2 2>; + pinctrl-single,bias-pullup = <1 1 1>; + pinctrl-single,bias-disable = <1 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sdio_cfg_func: pinmux_sdio_pins@2 { + pinctrl-single,pins = < + 0x1a4 0 /* SDIO0_CLK (IOCG113) */ + 0x1a8 0 /* SDIO0_CMD (IOCG114) */ + 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */ + 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */ + 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */ + 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + audio_out_cfg_func: pinmux_audio_pins@1 { + pinctrl-single,pins = < + 0x200 0 /* GPIO (IOCFG136) */ + 0x204 0 /* GPIO (IOCFG137) */ + >; + pinctrl-single,bias-pulldown = <2 2 2>; + pinctrl-single,bias-pullup = <0 1 1>; + pinctrl-single,bias-disable = <2 0 3>; + }; + }; + }; +};