From patchwork Thu Jul 10 07:26:33 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Viresh Kumar X-Patchwork-Id: 33397 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-qg0-f70.google.com (mail-qg0-f70.google.com [209.85.192.70]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 621FD21140 for ; Thu, 10 Jul 2014 07:29:26 +0000 (UTC) Received: by mail-qg0-f70.google.com with SMTP id z60sf19755753qgd.1 for ; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:delivered-to:from:to:subject:date:message-id :in-reply-to:references:in-reply-to:references:cc:precedence:list-id :list-unsubscribe:list-archive:list-post:list-help:list-subscribe :mime-version:sender:errors-to:x-original-sender :x-original-authentication-results:mailing-list:content-type :content-transfer-encoding; bh=VqceApeR2y84fnsmpZS3Is5YWjDuGkijYkMv6r3RLN4=; b=UiAaaeBXBPDRC1VHes3QhNdPyjc1IPJHj3xEQ0EnmrEN7PGZmvlvmCER164g4OTfpB 4WeQ4RqBI1lo5/713sBC41k/Zo+TdcCdWWAeUpL6vdZNJkvF0bx74brK29cklHjsbb0P yVho0HqNWfAWYSTLBHRAybVGEclI9uLPNRoKVM0C7vRfa+/e8ugKQSTm3p2GqMyg4GRL WNkubIWpg4poxzmRgwrOK01nLAxV6EhyxTMcJHsIE6xmzvCuflLixBi/HiaxkqGtqZFb mcwCFLz6x0FRs2y7cr+YtPnw233jxBF76DzHPwmRocC88vIbvmgNK7uVqK+lWJ2DUntO sXUQ== X-Gm-Message-State: ALoCoQnYIQlDjGK/Uog0gq1ZT4h5ohaKmaT113076R4QE/m0jEvyllEF49M9A81nW+EhSmvVX0Kr X-Received: by 10.236.19.7 with SMTP id m7mr19095280yhm.35.1404977366215; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) X-BeenThere: patchwork-forward@linaro.org Received: by 10.140.50.77 with SMTP id r71ls1451797qga.71.gmail; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) X-Received: by 10.52.116.194 with SMTP id jy2mr5591375vdb.39.1404977366146; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) Received: from mail-vc0-f173.google.com (mail-vc0-f173.google.com [209.85.220.173]) by mx.google.com with ESMTPS id xo6si22652786veb.19.2014.07.10.00.29.26 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 10 Jul 2014 00:29:26 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.220.173 as permitted sender) client-ip=209.85.220.173; Received: by mail-vc0-f173.google.com with SMTP id lf12so9761407vcb.32 for ; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) X-Received: by 10.58.229.162 with SMTP id sr2mr43735177vec.15.1404977366020; Thu, 10 Jul 2014 00:29:26 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.221.37.5 with SMTP id tc5csp111316vcb; Thu, 10 Jul 2014 00:29:25 -0700 (PDT) X-Received: by 10.66.254.37 with SMTP id af5mr14815025pad.113.1404977365197; Thu, 10 Jul 2014 00:29:25 -0700 (PDT) Received: from bombadil.infradead.org (bombadil.infradead.org. [2001:1868:205::9]) by mx.google.com with ESMTPS id qr7si47885271pbb.120.2014.07.10.00.29.24 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 10 Jul 2014 00:29:25 -0700 (PDT) Received-SPF: none (google.com: linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org does not designate permitted sender hosts) client-ip=2001:1868:205::9; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1X58lc-0007ra-Pf; Thu, 10 Jul 2014 07:27:44 +0000 Received: from mail-pd0-f179.google.com ([209.85.192.179]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1X58lZ-0007m1-8C for linux-arm-kernel@lists.infradead.org; Thu, 10 Jul 2014 07:27:42 +0000 Received: by mail-pd0-f179.google.com with SMTP id w10so10267232pde.24 for ; Thu, 10 Jul 2014 00:27:20 -0700 (PDT) X-Received: by 10.68.176.5 with SMTP id ce5mr35859965pbc.93.1404977240257; Thu, 10 Jul 2014 00:27:20 -0700 (PDT) Received: from localhost ([122.167.123.210]) by mx.google.com with ESMTPSA id dd5sm60937982pbc.85.2014.07.10.00.27.15 for (version=TLSv1.2 cipher=RC4-SHA bits=128/128); Thu, 10 Jul 2014 00:27:19 -0700 (PDT) From: Viresh Kumar To: arnd@linaro.org, olof@lixom.net Subject: [PATCH V9 2/7] phy: Add drivers for PCIe and SATA phy on SPEAr13xx Date: Thu, 10 Jul 2014 12:56:33 +0530 Message-Id: X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: References: In-Reply-To: References: X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140710_002741_350067_59B09250 X-CRM114-Status: GOOD ( 19.38 ) X-Spam-Score: -0.7 (/) X-Spam-Report: SpamAssassin version 3.4.0 on bombadil.infradead.org summary: Content analysis details: (-0.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [209.85.192.179 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RCVD_IN_MSPIKE_H2 RBL: Average reputation (+2) [209.85.192.179 listed in wl.mailspike.net] Cc: Pratyush Anand , b.zolnierkie@samsung.com, linux-pci@vger.kernel.org, spear-devel@list.st.com, mark@nicholnet.com, Kishon Vijay Abraham I , Viresh Kumar , bhelgaas@google.com, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: , List-Help: , List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: viresh.kumar@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.220.173 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 From: Pratyush Anand ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann Signed-off-by: Pratyush Anand Tested-by: Mohit Kumar Cc: Kishon Vijay Abraham I [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar --- .../devicetree/bindings/phy/st-spear1310-miphy.txt | 12 + .../devicetree/bindings/phy/st-spear1340-miphy.txt | 11 + drivers/phy/Kconfig | 12 + drivers/phy/Makefile | 2 + drivers/phy/phy-spear1310-miphy.c | 274 +++++++++++++++++++ drivers/phy/phy-spear1340-miphy.c | 302 +++++++++++++++++++++ 6 files changed, 613 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt create mode 100644 Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt create mode 100644 drivers/phy/phy-spear1310-miphy.c create mode 100644 drivers/phy/phy-spear1340-miphy.c diff --git a/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt new file mode 100644 index 0000000..b9b281a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt @@ -0,0 +1,12 @@ +ST SPEAr1310-miphy DT detail +=================================== + +SPEAr1310-miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1310-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- phy-id: Instance id of the phy. +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. diff --git a/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt new file mode 100644 index 0000000..7eb5335 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt @@ -0,0 +1,11 @@ +ST SPEAr1340-miphy DT detail +=================================== + +SPEAr1340-miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1340-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f06..e8f8a2d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -178,4 +178,16 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index b4f1d57..d39609b 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -20,3 +20,5 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c new file mode 100644 index 0000000..c58c869 --- /dev/null +++ b/drivers/phy/phy-spear1310-miphy.c @@ -0,0 +1,274 @@ +/* + * ST SPEAr1310-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1310 Registers */ +#define SPEAR1310_PCIE_SATA_CFG 0x3A4 + #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31) + #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30) + #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29) + #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31) + #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30) + #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29) + #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27) + #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26) + #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25) + #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24) + #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23) + #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22) + #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21) + #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20) + #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19) + #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18) + #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17) + #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16) + #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10) + #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7) + #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6) + #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5) + #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4) + #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3) + #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2) + #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1) + #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0) + + #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29))) + #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \ + BIT((x + 29))) + #define SPEAR1310_PCIE_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \ + SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \ + SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT) + #define SPEAR1310_SATA_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \ + SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \ + SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_TX_CLK_EN) + +#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8 + #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31) + #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28) + #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16) + #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15) + #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12) + #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25)) + +#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC + +enum spear1310_miphy_mode { + SATA, + PCIE, +}; + +struct spear1310_miphy_priv { + /* instance id of this phy */ + u32 id; + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1310_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv) +{ + u32 val; + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE); + + switch (priv->id) { + case 0: + val = SPEAR1310_PCIE_CFG_VAL(0); + break; + case 1: + val = SPEAR1310_PCIE_CFG_VAL(1); + break; + case 2: + val = SPEAR1310_PCIE_CFG_VAL(2); + break; + default: + return -EINVAL; + } + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), val); + + return 0; +} + +static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), 0); + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0); + + return 0; +} + +static int spear1310_miphy_init(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_init(priv); + + return ret; +} + +static int spear1310_miphy_exit(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1310_miphy_of_match[] = { + { .compatible = "st,spear1310-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match); + +static struct phy_ops spear1310_miphy_ops = { + .init = spear1310_miphy_init, + .exit = spear1310_miphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *spear1310_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1310_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return NULL; + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return NULL; + } + + return priv->phy; +} + +static int spear1310_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1310_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "can't alloc spear1310_miphy private date memory\n"); + return -ENOMEM; + } + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) { + dev_err(dev, "failed to find phy id\n"); + return -EINVAL; + } + + priv->phy = devm_phy_create(dev, &spear1310_miphy_ops, NULL); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1310_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1310_miphy_driver = { + .probe = spear1310_miphy_probe, + .driver = { + .name = "spear1310-miphy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear1310_miphy_of_match), + }, +}; + +static int __init spear1310_miphy_phy_init(void) +{ + return platform_driver_register(&spear1310_miphy_driver); +} +module_init(spear1310_miphy_phy_init); + +static void __exit spear1310_miphy_phy_exit(void) +{ + platform_driver_unregister(&spear1310_miphy_driver); +} +module_exit(spear1310_miphy_phy_exit); + +MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c new file mode 100644 index 0000000..5e39231 --- /dev/null +++ b/drivers/phy/phy-spear1340-miphy.c @@ -0,0 +1,302 @@ +/* + * ST spear1340-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1340 Registers */ +/* Power Management Registers */ +#define SPEAR1340_PCM_CFG 0x100 + #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11) +#define SPEAR1340_PCM_WKUP_CFG 0x104 +#define SPEAR1340_SWITCH_CTR 0x108 + +#define SPEAR1340_PERIP1_SW_RST 0x318 + #define SPEAR1340_PERIP1_SW_RSATA BIT(12) +#define SPEAR1340_PERIP2_SW_RST 0x31C +#define SPEAR1340_PERIP3_SW_RST 0x320 + +/* PCIE - SATA configuration registers */ +#define SPEAR1340_PCIE_SATA_CFG 0x424 + /* PCIE CFG MASks */ + #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10) + #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4) + #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3) + #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2) + #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1) + #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) + #define SPEAR1340_PCIE_SATA_SEL_SATA (1) + #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F + #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ + SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ + SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ + SPEAR1340_PCIE_CFG_POWERUP_RESET | \ + SPEAR1340_PCIE_CFG_DEVICE_PRESENT) + #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ + SPEAR1340_SATA_CFG_PM_CLK_EN | \ + SPEAR1340_SATA_CFG_POWERUP_RESET | \ + SPEAR1340_SATA_CFG_RX_CLK_EN | \ + SPEAR1340_SATA_CFG_TX_CLK_EN) + +#define SPEAR1340_PCIE_MIPHY_CFG 0x428 + #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31) + #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27) + #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) + #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_CLK_REF_DIV2 | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) + +enum spear1340_miphy_mode { + SATA, + PCIE, +}; + +struct spear1340_miphy_priv { + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1340_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, + SPEAR1340_SATA_CFG_VAL); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK); + /* Switch on sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, + SPEAR1340_PCM_CFG_SATA_POWER_EN); + msleep(20); + /* Disable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, 0); + msleep(20); + + return 0; +} + +static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + + /* Enable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, + SPEAR1340_PERIP1_SW_RSATA); + msleep(20); + /* Switch off sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, 0); + msleep(20); + + return 0; +} + +static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, + SPEAR1340_PCIE_CFG_VAL); + + return 0; +} + +static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + + return 0; +} + +static int spear1340_miphy_init(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_init(priv); + + return ret; +} + +static int spear1340_miphy_exit(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1340_miphy_of_match[] = { + { .compatible = "st,spear1340-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match); + +static struct phy_ops spear1340_miphy_ops = { + .init = spear1340_miphy_init, + .exit = spear1340_miphy_exit, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_PM_SLEEP +static int spear1340_miphy_suspend(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + + return ret; +} + +static int spear1340_miphy_resume(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend, + spear1340_miphy_resume); + +static struct phy *spear1340_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return NULL; + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return NULL; + } + + return priv->phy; +} + +static int spear1340_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1340_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "can't alloc spear1340_miphy private date memory\n"); + return -ENOMEM; + } + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + priv->phy = devm_phy_create(dev, &spear1340_miphy_ops, NULL); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1340_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1340_miphy_driver = { + .probe = spear1340_miphy_probe, + .driver = { + .name = "spear1340-miphy", + .owner = THIS_MODULE, + .pm = &spear1340_miphy_pm_ops, + .of_match_table = of_match_ptr(spear1340_miphy_of_match), + }, +}; + +static int __init spear1340_miphy_phy_init(void) +{ + return platform_driver_register(&spear1340_miphy_driver); +} +module_init(spear1340_miphy_phy_init); + +static void __exit spear1340_miphy_phy_exit(void) +{ + platform_driver_unregister(&spear1340_miphy_driver); +} +module_exit(spear1340_miphy_phy_exit); + +MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2");