mbox series

[v5,0/7] Add OSM L3 Interconnect Provider

Message ID 20200227105632.15041-1-sibis@codeaurora.org
Headers show
Series Add OSM L3 Interconnect Provider | expand

Message

Sibi Sankar Feb. 27, 2020, 10:56 a.m. UTC
This patch series aims to add Operating State Manager (OSM) L3
interconnect provider support on SDM845 and SC7180 SoCs to handle
bandwidth requests from CPU to scale L3 caches.

V5:
 * addressed misc review comments from Georgi
 * allow icc node ids to be used across multiple providers
 * picked up Rob's R-b and Ack

V4:
 * add SC7180 support
 * use icc_std_aggregate
 * use icc_nodes_remove
 * fixup Evan's review comments.

v3:
 * switched the dt-bindings to dual-license
 * rebased to linux-next

v2:
 * addressed review comments from Evan
 * dropped unused gpu icc node on SDM845 SoC

Depends on:
SDM845 icc refactor: https://patchwork.kernel.org/cover/11372211/
SC7180 icc support: https://patchwork.kernel.org/cover/11404167/

Sibi Sankar (7):
  interconnect: qcom: Allow icc node to be used across icc providers
  dt-bindings: interconnect: Add OSM L3 DT bindings
  interconnect: qcom: Add OSM L3 interconnect provider support
  dt-bindings: interconnect: Add OSM L3 DT binding on SC7180
  interconnect: qcom: Add OSM L3 support on SC7180
  arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider
  arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider

 .../bindings/interconnect/qcom,osm-l3.yaml    |  62 ++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  11 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  11 +
 drivers/interconnect/qcom/Kconfig             |   7 +
 drivers/interconnect/qcom/Makefile            |   2 +
 drivers/interconnect/qcom/osm-l3.c            | 276 ++++++++++++++++++
 drivers/interconnect/qcom/sc7180.h            |   2 +
 drivers/interconnect/qcom/sdm845.c            | 134 +--------
 drivers/interconnect/qcom/sdm845.h            | 142 +++++++++
 .../dt-bindings/interconnect/qcom,osm-l3.h    |  12 +
 10 files changed, 526 insertions(+), 133 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
 create mode 100644 drivers/interconnect/qcom/osm-l3.c
 create mode 100644 drivers/interconnect/qcom/sdm845.h
 create mode 100644 include/dt-bindings/interconnect/qcom,osm-l3.h

Comments

Evan Green Feb. 29, 2020, 12:10 a.m. UTC | #1
On Thu, Feb 27, 2020 at 2:57 AM Sibi Sankar <sibis@codeaurora.org> wrote:
>
> Add Operation State Manager (OSM) L3 interconnect provider on SC7180 SoCs.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Evan Green <evgreen@chromium.org>
Georgi Djakov March 4, 2020, 4:33 p.m. UTC | #2
On 2/27/20 12:56, Sibi Sankar wrote:
> Add Operation State Manager (OSM) L3 interconnect provider on SC7180 SoCs.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

Thanks,
Georgi