mbox series

[v2,0/4] arm64: dts: qcom: qrb5165-rb5: use GPIO as SPI0 CS

Message ID 20210209124758.990681-1-dmitry.baryshkov@linaro.org
Headers show
Series arm64: dts: qcom: qrb5165-rb5: use GPIO as SPI0 CS | expand

Message

Dmitry Baryshkov Feb. 9, 2021, 12:47 p.m. UTC
GENI SPI controller shows several issues if it manages the CS on its own
(see 37dd4b777942 ("arm64: dts: qcom: sc7180: Provide pinconf for SPI to
use GPIO for CS") for the details). Configure SPI0 CS pin as a GPIO.

Changes since v1:
 - Split sm8250's spi pin config into mux/config parts, split away CS
   handling from main SPI pinctrl nodes.