mbox series

[0/9] ASoC: add audio digital codecs for Qualcomm SM8550

Message ID 20230310132201.322148-1-krzysztof.kozlowski@linaro.org
Headers show
Series ASoC: add audio digital codecs for Qualcomm SM8550 | expand

Message

Krzysztof Kozlowski March 10, 2023, 1:21 p.m. UTC
Hi,

Dependencies
============
For va-macro bindings:
https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org

NOT a dependency
================
The patchset can be applied independently of my previous fix:
https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u

Logically, better if they were together, but code will work fine other way.

Best regards,
Krzysztof

Krzysztof Kozlowski (9):
  ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
  ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
  ASoC: codecs: lpass-rx-macro: add support for SM8550
  ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants
  ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro
  ASoC: codecs: lpass-tx-macro: add support for SM8550
  ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro
  ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro
  ASoC: codecs: lpass-wsa-macro: add support for SM8550

 .../bindings/sound/qcom,lpass-rx-macro.yaml   | 76 +++++++++++++----
 .../bindings/sound/qcom,lpass-tx-macro.yaml   | 81 +++++++++++++++----
 .../bindings/sound/qcom,lpass-va-macro.yaml   | 18 +++++
 .../bindings/sound/qcom,lpass-wsa-macro.yaml  | 23 +++++-
 sound/soc/codecs/lpass-rx-macro.c             | 39 +++++++--
 sound/soc/codecs/lpass-tx-macro.c             | 38 +++++++--
 sound/soc/codecs/lpass-wsa-macro.c            | 38 +++++++--
 7 files changed, 256 insertions(+), 57 deletions(-)

Comments

Krzysztof Kozlowski March 10, 2023, 2:35 p.m. UTC | #1
On 10/03/2023 14:21, Krzysztof Kozlowski wrote:
> Hi,
> 
> Dependencies
> ============
> For va-macro bindings:
> https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org
> 
> NOT a dependency
> ================
> The patchset can be applied independently of my previous fix:
> https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u

DTS implementing the bindings is here:

https://lore.kernel.org/linux-arm-msm/20230310134925.514125-1-krzysztof.kozlowski@linaro.org/T/#u

Best regards,
Krzysztof
Srinivas Kandagatla March 11, 2023, 11:23 a.m. UTC | #2
Thanks Krzysztof for adding this support.
Few minor nits,

On 10/03/2023 13:21, Krzysztof Kozlowski wrote:
> Add support for the RX macro codec on Qualcomm SM8550.  SM8550 does not
> use NPL clock, thus add flags allowing to skip it.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++-------
>   1 file changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
> index a73a7d7a1c0a..e322d918db36 100644
> --- a/sound/soc/codecs/lpass-rx-macro.c
> +++ b/sound/soc/codecs/lpass-rx-macro.c
> @@ -395,6 +395,9 @@
>   #define COMP_MAX_COEFF 25
>   #define RX_NUM_CLKS_MAX	5
>   
> +/* NPL clock is expected */
> +#define RX_MACRO_FLAG_HAS_NPL_CLOCK		BIT(0)

We could probably rename it and move it to 
sound/soc/codecs/lpass-macro-common.h as this equally applies to all the 
codec macros.


Once done,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> +
>   struct comp_coeff_val {
>   	u8 lsb;
>   	u8 msb;
> @@ -3491,7 +3494,10 @@ static int rx_macro_register_mclk_output(struct rx_macro *rx)
>   	struct clk_init_data init;
>   	int ret;
>   
> -	parent_clk_name = __clk_get_name(rx->npl);
> +	if (rx->npl)
> +		parent_clk_name = __clk_get_name(rx->npl);
> +	else
> +		parent_clk_name = __clk_get_name(rx->mclk);
>   
>   	init.name = clk_name;
>   	init.ops = &swclk_gate_ops;
> @@ -3521,10 +3527,13 @@ static const struct snd_soc_component_driver rx_macro_component_drv = {
>   static int rx_macro_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
> +	kernel_ulong_t flags;
>   	struct rx_macro *rx;
>   	void __iomem *base;
>   	int ret;
>   
> +	flags = (kernel_ulong_t)device_get_match_data(dev);
> +
>   	rx = devm_kzalloc(dev, sizeof(*rx), GFP_KERNEL);
>   	if (!rx)
>   		return -ENOMEM;
> @@ -3541,9 +3550,11 @@ static int rx_macro_probe(struct platform_device *pdev)
>   	if (IS_ERR(rx->mclk))
>   		return PTR_ERR(rx->mclk);
>   
> -	rx->npl = devm_clk_get(dev, "npl");
> -	if (IS_ERR(rx->npl))
> -		return PTR_ERR(rx->npl);
> +	if (flags & RX_MACRO_FLAG_HAS_NPL_CLOCK) {
> +		rx->npl = devm_clk_get(dev, "npl");
> +		if (IS_ERR(rx->npl))
> +			return PTR_ERR(rx->npl);
> +	}
>   
>   	rx->fsgen = devm_clk_get(dev, "fsgen");
>   	if (IS_ERR(rx->fsgen))
> @@ -3655,10 +3666,22 @@ static int rx_macro_remove(struct platform_device *pdev)
>   }
>   
>   static const struct of_device_id rx_macro_dt_match[] = {
> -	{ .compatible = "qcom,sc7280-lpass-rx-macro" },
> -	{ .compatible = "qcom,sm8250-lpass-rx-macro" },
> -	{ .compatible = "qcom,sm8450-lpass-rx-macro" },
> -	{ .compatible = "qcom,sc8280xp-lpass-rx-macro" },
> +	{
> +		.compatible = "qcom,sc7280-lpass-rx-macro",
> +		.data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
> +
> +	}, {
> +		.compatible = "qcom,sm8250-lpass-rx-macro",
> +		.data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
> +	}, {
> +		.compatible = "qcom,sm8450-lpass-rx-macro",
> +		.data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
> +	}, {
> +		.compatible = "qcom,sm8550-lpass-rx-macro",
> +	}, {
> +		.compatible = "qcom,sc8280xp-lpass-rx-macro",
> +		.data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
> +	},
>   	{ }
>   };
>   MODULE_DEVICE_TABLE(of, rx_macro_dt_match);
Krzysztof Kozlowski March 11, 2023, 11:27 a.m. UTC | #3
On 11/03/2023 12:23, Srinivas Kandagatla wrote:
> Thanks Krzysztof for adding this support.
> Few minor nits,
> 
> On 10/03/2023 13:21, Krzysztof Kozlowski wrote:
>> Add support for the RX macro codec on Qualcomm SM8550.  SM8550 does not
>> use NPL clock, thus add flags allowing to skip it.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>   sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++-------
>>   1 file changed, 31 insertions(+), 8 deletions(-)
>>
>> diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
>> index a73a7d7a1c0a..e322d918db36 100644
>> --- a/sound/soc/codecs/lpass-rx-macro.c
>> +++ b/sound/soc/codecs/lpass-rx-macro.c
>> @@ -395,6 +395,9 @@
>>   #define COMP_MAX_COEFF 25
>>   #define RX_NUM_CLKS_MAX	5
>>   
>> +/* NPL clock is expected */
>> +#define RX_MACRO_FLAG_HAS_NPL_CLOCK		BIT(0)
> 
> We could probably rename it and move it to 
> sound/soc/codecs/lpass-macro-common.h as this equally applies to all the 
> codec macros.
> 
> 
> Once done,
> 
> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Sure, I'll move it there.

Best regards,
Krzysztof
Srinivas Kandagatla March 11, 2023, 11:28 a.m. UTC | #4
On 10/03/2023 13:22, Krzysztof Kozlowski wrote:
> Add support for the WSA macro codec on Qualcomm SM8550.  SM8550 does not
> use NPL clock, thus add flags allowing to skip it.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   sound/soc/codecs/lpass-wsa-macro.c | 38 +++++++++++++++++++++++-------
>   1 file changed, 30 insertions(+), 8 deletions(-)
> 
> diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c
> index ba7480f3831e..5155362de111 100644
> --- a/sound/soc/codecs/lpass-wsa-macro.c
> +++ b/sound/soc/codecs/lpass-wsa-macro.c
> @@ -246,6 +246,9 @@
>   #define WSA_MACRO_EC_MIX_TX1_MASK 0x18
>   #define WSA_MACRO_MAX_DMA_CH_PER_PORT 0x2
>   
> +/* NPL clock is expected */
> +#define WSA_MACRO_FLAG_HAS_NPL_CLOCK		BIT(0)
> +


Same nit as 3/9

Once done,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

--srini

>   enum {
>   	WSA_MACRO_GAIN_OFFSET_M1P5_DB,
>   	WSA_MACRO_GAIN_OFFSET_0_DB,
> @@ -2346,7 +2349,10 @@ static int wsa_macro_register_mclk_output(struct wsa_macro *wsa)
>   	struct clk_init_data init;
>   	int ret;
>   
> -	parent_clk_name = __clk_get_name(wsa->npl);
> +	if (wsa->npl)
> +		parent_clk_name = __clk_get_name(wsa->npl);
> +	else
> +		parent_clk_name = __clk_get_name(wsa->mclk);
>   
>   	init.name = "mclk";
>   	of_property_read_string(dev_of_node(dev), "clock-output-names",
> @@ -2379,9 +2385,12 @@ static int wsa_macro_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
>   	struct wsa_macro *wsa;
> +	kernel_ulong_t flags;
>   	void __iomem *base;
>   	int ret;
>   
> +	flags = (kernel_ulong_t)device_get_match_data(dev);
> +
>   	wsa = devm_kzalloc(dev, sizeof(*wsa), GFP_KERNEL);
>   	if (!wsa)
>   		return -ENOMEM;
> @@ -2398,9 +2407,11 @@ static int wsa_macro_probe(struct platform_device *pdev)
>   	if (IS_ERR(wsa->mclk))
>   		return PTR_ERR(wsa->mclk);
>   
> -	wsa->npl = devm_clk_get(dev, "npl");
> -	if (IS_ERR(wsa->npl))
> -		return PTR_ERR(wsa->npl);
> +	if (flags & WSA_MACRO_FLAG_HAS_NPL_CLOCK) {
> +		wsa->npl = devm_clk_get(dev, "npl");
> +		if (IS_ERR(wsa->npl))
> +			return PTR_ERR(wsa->npl);
> +	}
>   
>   	wsa->fsgen = devm_clk_get(dev, "fsgen");
>   	if (IS_ERR(wsa->fsgen))
> @@ -2553,10 +2564,21 @@ static const struct dev_pm_ops wsa_macro_pm_ops = {
>   };
>   
>   static const struct of_device_id wsa_macro_dt_match[] = {
> -	{.compatible = "qcom,sc7280-lpass-wsa-macro"},
> -	{.compatible = "qcom,sm8250-lpass-wsa-macro"},
> -	{.compatible = "qcom,sm8450-lpass-wsa-macro"},
> -	{.compatible = "qcom,sc8280xp-lpass-wsa-macro" },
> +	{
> +		.compatible = "qcom,sc7280-lpass-wsa-macro",
> +		.data = (void *)WSA_MACRO_FLAG_HAS_NPL_CLOCK,
> +	}, {
> +		.compatible = "qcom,sm8250-lpass-wsa-macro",
> +		.data = (void *)WSA_MACRO_FLAG_HAS_NPL_CLOCK,
> +	}, {
> +		.compatible = "qcom,sm8450-lpass-wsa-macro",
> +		.data = (void *)WSA_MACRO_FLAG_HAS_NPL_CLOCK,
> +	}, {
> +		.compatible = "qcom,sm8550-lpass-wsa-macro",
> +	}, {
> +		.compatible = "qcom,sc8280xp-lpass-wsa-macro",
> +		.data = (void *)WSA_MACRO_FLAG_HAS_NPL_CLOCK,
> +	},
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, wsa_macro_dt_match);