mbox series

[v4,00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs

Message ID 20230331164323.729093-1-bhupesh.sharma@linaro.org
Headers show
Series arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand

Message

Bhupesh Sharma March 31, 2023, 4:43 p.m. UTC
Changes since v3:
-----------------
- v3 can be viewed here: https://lore.kernel.org/linux-arm-msm/20230328092815.292665-1-bhupesh.sharma@linaro.org/
- Collected Acks from Krzysztof for a couple of patches sent in v3.
- Fixed review comments from Krzysztof regarding DMA binding document
  and also added a couple of new patches which are required to fix the
  'dtbs_check' errors highlighted after this fix.

Changes since v2:
-----------------
- v2 can be viewed here: https://lore.kernel.org/linux-arm-msm/20230322114519.3412469-1-bhupesh.sharma@linaro.org/
- No functional change since v2. As the sdm845 patch from v1 was accepted in linux-next,
  dropped it from this version.

Changes since v1:
-----------------
- v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20230321190118.3327360-1-bhupesh.sharma@linaro.org/
- Folded the BAM DMA dt-binding change.
  (sent earlier as: https://lore.kernel.org/linux-arm-msm/20230321184811.3325725-1-bhupesh.sharma@linaro.org/)
- Folded the QCE dt-binding change.
  (sent earlier as: https://lore.kernel.org/linux-arm-msm/20230320073816.3012198-1-bhupesh.sharma@linaro.org/)
- Folded Neil's SM8450 dts patch in this series.
- Addressed review comments from Rob, Stephan and Konrad.
- Collected Konrad's R-B for [PATCH 5/9].

This patchset enables Crypto Engine support for Qualcomm SoCs like
SM6115, SM8150, SM8250, SM8350 and SM8450.

Note that:
- SM8250 crypto engine patch utilizes the work already done by myself and
  Vladimir.
- SM8350 crypto engine patch utilizes the work already done by Robert.
- SM8450 crypto engine patch utilizes the work already done by Neil.

Also this patchset is rebased on linux-next/master.

Bhupesh Sharma (10):
  dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
  dt-bindings: dma: Increase iommu maxItems for BAM DMA
  arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string
  arm64: dts: qcom: sdm845: Fix the slimbam DMA engine compatible string
  dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and
    IPQ4019 SoCs
  dt-bindings: qcom-qce: Add compatibles for SM6115 and QCM2290
  arm64: dts: qcom: sm6115: Add Crypto Engine support
  arm64: dts: qcom: sm8150: Add Crypto Engine support
  arm64: dts: qcom: sm8250: Add Crypto Engine support
  arm64: dts: qcom: sm8350: Add Crypto Engine support

Neil Armstrong (1):
  arm64: dts: qcom: sm8450: add crypto nodes

 .../devicetree/bindings/crypto/qcom-qce.yaml  |  8 ++++++
 .../devicetree/bindings/dma/qcom,bam-dma.yaml | 22 +++++++++------
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 22 +++++++++++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 22 +++++++++++++++
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 22 +++++++++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 22 +++++++++++++++
 arch/arm64/boot/dts/qcom/sm8450.dtsi          | 28 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |  2 +-
 9 files changed, 140 insertions(+), 10 deletions(-)

Comments

Konrad Dybcio March 31, 2023, 7:55 p.m. UTC | #1
On 31.03.2023 18:43, Bhupesh Sharma wrote:
> As per documentation, Qualcomm SDM845 SoC supports SLIMBAM DMA
> engine v1.7.4, so use the correct compatible strings.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 2f32179c7d1b..17a29184884c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -5152,7 +5152,7 @@ msi-controller@17a40000 {
>  		};
>  
>  		slimbam: dma-controller@17184000 {
> -			compatible = "qcom,bam-v1.7.0";
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
>  			qcom,controlled-remotely;
>  			reg = <0 0x17184000 0 0x2a000>;
>  			num-channels = <31>;