mbox series

[v3,0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector

Message ID 20230503-topic-sm8450-graphics-dp-next-v3-0-6c43d293995f@linaro.org
Headers show
Series arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector | expand

Message

Neil Armstrong May 23, 2023, 7:15 a.m. UTC
This is the final step to achieve USB-C Altmode on the HDK8350
and HDK8450 now DP controller support, USB3+DP Combo PHY and
pmic glink support have been merged for those platforms.

This patchset depends on the QMP Combo USB3+DP PHY orientation
support at [1].

The following has been successfully tested:
- USB-C PD Power Role, reported status are coherent
- USB-C dual-role data
  - USB2.0 only (no-PD) as DFP or UFP
  - USB2.0 + USB SuperSpeed as DFP or UFP & in both orientations
  - USB2.0 + USB SuperSpeed + DisplayPort Altmode in both orientations
  - DisplayPort-only Altmode in both orientations

Data role and SuperSpeed lanes were correctly switched on the PHY
side after USB-C removal/insertion.

[1] https://lore.kernel.org/all/20230510031930.1996020-1-quic_bjorande@quicinc.com

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Rebased on next-230523 now PHY patches were applied
- Link to v2: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v2-0-8acbbe1e9d14@linaro.org

Changes in v2:
- rebased on next-230510 + orientation patchset v2
- define port@2 in patches 1 & 2
- Add reviewed tags
- Renamed fsa4480 node name
- Added missing blank line
- Moved status at last position
- Re-ordered node ref
- Fixed commit message of last patch
- Link to v1: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v1-0-d1ee9397f2a6@linaro.org

---
Neil Armstrong (6):
      arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
      arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
      arm64: defconfig: enable FSA4480 driver as module
      qcom: pmic_glink: enable altmode for SM8450

 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 76 ++++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 26 +++++++++++
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 73 ++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 26 +++++++++++
 arch/arm64/configs/defconfig            |  1 +
 drivers/soc/qcom/pmic_glink.c           |  8 +++-
 6 files changed, 204 insertions(+), 6 deletions(-)
---
base-commit: 8e7eb170057ce57f049f7b6749741d7b23d09af2
change-id: 20230503-topic-sm8450-graphics-dp-next-1dab962ae67d

Best regards,

Comments

Bjorn Andersson May 23, 2023, 7:40 p.m. UTC | #1
On Tue, 23 May 2023 09:15:44 +0200, Neil Armstrong wrote:
> This is the final step to achieve USB-C Altmode on the HDK8350
> and HDK8450 now DP controller support, USB3+DP Combo PHY and
> pmic glink support have been merged for those platforms.
> 
> This patchset depends on the QMP Combo USB3+DP PHY orientation
> support at [1].
> 
> [...]

Applied, thanks!

[1/6] arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
      commit: d831312557e7308cdb59da5b3a228175e8d7738d
[2/6] arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
      commit: e5167da381a71eeeac13d8ec299ac7c597622b23
[3/6] arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
      commit: a3e42da4f712ca7fb3c9b1543f11ad82100e9914
[4/6] arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
      commit: b002bac7b4847aa11a6a56d14b2d75d4118f9591

Best regards,