diff mbox series

[v2,1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs

Message ID 1602609110-11504-2-git-send-email-tdas@codeaurora.org
State New
Headers show
Series Add Camera clock controller driver for SC7180 | expand

Commit Message

Taniya Das Oct. 13, 2020, 5:11 p.m. UTC
Add programming sequence support for managing the Agera PLLs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 80 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  4 ++
 2 files changed, 84 insertions(+)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Comments

Taniya Das Oct. 16, 2020, 6:38 p.m. UTC | #1
Thanks Stephen for the review comments.

On 10/14/2020 7:37 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2020-10-13 10:11:48)
>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>> index 26139ef..17e1fc0 100644
>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>> @@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
>>          .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
>>   };
>>   EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
>> +
>> +void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>> +                       const struct alpha_pll_config *config)
>> +{
>> +       if (config->l)
>> +               regmap_write(regmap, PLL_L_VAL(pll), config->l);
> 
> Maybe make a helper function for this too. That way we can't mix up the
> if condition with the value in the write.
> 

Sure, I will add a helper function.

> 	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
> 
> static void clk_alpha_pll_write_config(struct regmap *regmap,
> 				       unsigned int reg,
> 				       unsigned int val) {
> 	if (val)
> 		regmap_write(regmap, reg, val);
> }
> 
> and how are we so lucky that zero isn't a value that we may need to
> write?
> 
>> +
>> +       if (config->alpha)
>> +               regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
>> +
>> +       if (config->user_ctl_val)
>> +               regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
>> +
>> +       if (config->config_ctl_val)
>> +               regmap_write(regmap, PLL_CONFIG_CTL(pll),
>> +                                               config->config_ctl_val);
>> +
>> +       if (config->config_ctl_hi_val)
>> +               regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
>> +                                               config->config_ctl_hi_val);
>> +
>> +       if (config->test_ctl_val)
>> +               regmap_write(regmap, PLL_TEST_CTL(pll),
>> +                                               config->test_ctl_val);
>> +
>> +       if (config->test_ctl_hi_val)
>> +               regmap_write(regmap,  PLL_TEST_CTL_U(pll),
>> +                                               config->test_ctl_hi_val);
>> +}
>> +EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
>> +
>> +static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
>> +                                                       unsigned long prate)
>> +{
>> +       struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> +       u32 l, alpha_width = pll_alpha_width(pll);
>> +       unsigned long rrate, max = rate + PLL_RATE_MARGIN;
>> +       u64 a;
>> +
>> +       rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
>> +
>> +       /*
>> +        * Due to limited number of bits for fractional rate programming, the
>> +        * rounded up rate could be marginally higher than the requested rate.
>> +        */
>> +       if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
>> +               pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
>> +                      clk_hw_get_name(hw), rrate, rate, max);
>> +               return -EINVAL;
>> +       }
> 
> Can this be extracted into a helper function?
> 

Yes, I will add this too.

>> +
>> +       /* change L_VAL without having to go through the power on sequence */
>> +       regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
>> +       regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
>> +
>> +       if (clk_hw_is_enabled(hw))
>> +               return wait_for_pll_enable_lock(pll);
>> +
>> +       return 0;
>> +}
>> +
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..17e1fc0 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,16 @@  const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x38,
 		[PLL_OFF_ALPHA_VAL] = 0x40,
 	},
+	[CLK_ALPHA_PLL_TYPE_AGERA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_ALPHA_VAL] = 0x08,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_CONFIG_CTL] = 0x10,
+		[PLL_OFF_CONFIG_CTL_U] = 0x14,
+		[PLL_OFF_TEST_CTL] = 0x18,
+		[PLL_OFF_TEST_CTL_U] = 0x1c,
+		[PLL_OFF_STATUS] = 0x2c,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);

@@ -1561,3 +1571,73 @@  const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
 	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			const struct alpha_pll_config *config)
+{
+	if (config->l)
+		regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+	if (config->alpha)
+		regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+	if (config->user_ctl_val)
+		regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+
+	if (config->config_ctl_val)
+		regmap_write(regmap, PLL_CONFIG_CTL(pll),
+						config->config_ctl_val);
+
+	if (config->config_ctl_hi_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+						config->config_ctl_hi_val);
+
+	if (config->test_ctl_val)
+		regmap_write(regmap, PLL_TEST_CTL(pll),
+						config->test_ctl_val);
+
+	if (config->test_ctl_hi_val)
+		regmap_write(regmap,  PLL_TEST_CTL_U(pll),
+						config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+							unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l, alpha_width = pll_alpha_width(pll);
+	unsigned long rrate, max = rate + PLL_RATE_MARGIN;
+	u64 a;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+	/*
+	 * Due to limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+		       clk_hw_get_name(hw), rrate, rate, max);
+		return -EINVAL;
+	}
+
+	/* change L_VAL without having to go through the power on sequence */
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+	if (clk_hw_is_enabled(hw))
+		return wait_for_pll_enable_lock(pll);
+
+	return 0;
+}
+
+const struct clk_ops clk_alpha_pll_agera_ops = {
+	.enable = clk_alpha_pll_enable,
+	.disable = clk_alpha_pll_disable,
+	.is_enabled = clk_alpha_pll_is_enabled,
+	.recalc_rate = alpha_pll_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = clk_alpha_pll_agera_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..0ea30d2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@  enum {
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
 	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+	CLK_ALPHA_PLL_TYPE_AGERA,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };

@@ -141,6 +142,7 @@  extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
 extern const struct clk_ops clk_alpha_pll_lucid_ops;
 #define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_agera_ops;

 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
@@ -148,6 +150,8 @@  void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				const struct alpha_pll_config *config);
 void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+				const struct alpha_pll_config *config);
 #define clk_lucid_pll_configure(pll, regmap, config) \
 	clk_trion_pll_configure(pll, regmap, config)