| Message ID | 1650552459-21077-3-git-send-email-quic_srivasam@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add soundcard support for sc7280 based platforms. | expand |
On 4/21/2022 9:47 PM, Matthias Kaehlcke wrote: Thanks for your time Matthias!!! > On Thu, Apr 21, 2022 at 08:17:29PM +0530, Srinivasa Rao Mandadapu wrote: > >> Subject: arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0 and CRD 2.0 > This also enables things for IDP boards, right? If that isn't intended > then these changes should be in sc7280-crd-r3.dts These changes are required for IDP boards also. Will update the commit message accordingly. > >> Enable rx, tx and va macro codecs and soundwire nodes on revision 3 >> and 4 (aka CRD 1.0 and 2.0) boards. >> >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> index 2f863c0..6cb5fc4 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> @@ -238,6 +238,19 @@ >> modem-init; >> }; >> >> +&lpass_rx_macro { >> + status = "okay"; >> +}; >> + >> +&lpass_tx_macro { >> + status = "okay"; >> +}; >> + >> +&lpass_va_macro { >> + status = "okay"; >> + vdd-micb-supply = <&vreg_bob>; >> +}; >> + >> &pcie1 { >> status = "okay"; >> perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; >> @@ -298,6 +311,28 @@ >> cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; >> }; >> >> +&swr0 { >> + status = "okay"; >> + >> + wcd_rx: codec@0,4 { >> + compatible = "sdw20217010d00"; >> + reg = <0 4>; >> + #sound-dai-cells = <1>; >> + qcom,rx-port-mapping = <1 2 3 4 5>; >> + }; >> +}; >> + >> +&swr1 { >> + status = "okay"; >> + >> + wcd_tx: codec@0,3 { >> + compatible = "sdw20217010d00"; >> + reg = <0 3>; >> + #sound-dai-cells = <1>; >> + qcom,tx-port-mapping = <1 2 3 4>; >> + }; >> +}; >> + >> &uart5 { >> compatible = "qcom,geni-debug-uart"; >> status = "okay"; >> -- >> 2.7.4 >>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 2f863c0..6cb5fc4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -238,6 +238,19 @@ modem-init; }; +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + &pcie1 { status = "okay"; perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; @@ -298,6 +311,28 @@ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay";