diff mbox series

[v10,03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1

Message ID 1650636521-18442-4-git-send-email-quic_srivasam@quicinc.com
State New
Headers show
Series Add soundcard support for sc7280 based platforms. | expand

Commit Message

Srinivasa Rao Mandadapu April 22, 2022, 2:08 p.m. UTC 
Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5+ (aka CRD 3.0/3.1) boards.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 20 ++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi        | 22 ++++++++++++++++++++++
 2 files changed, 42 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index b06f61e..9348728 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -81,6 +81,18 @@  ap_ts_pen_1v8: &i2c13 {
 	};
 };
 
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
 /* For nvme */
 &pcie1 {
 	status = "okay";
@@ -101,6 +113,14 @@  ap_ts_pen_1v8: &i2c13 {
 	status = "okay";
 };
 
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
 /* PINCTRL - BOARD-SPECIFIC */
 
 /*
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index b833ba1..11d37cb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -293,6 +293,10 @@ 
 	modem-init;
 };
 
+&lpass_va_macro {
+	vdd-micb-supply = <&vreg_bob>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l10c_0p88>;
 	vdda-pll-supply = <&vreg_l6b_1p2>;
@@ -326,6 +330,24 @@ 
 	no-sdio;
 };
 
+&swr0 {
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		#sound-dai-cells = <1>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		#sound-dai-cells = <1>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
 uart_dbg: &uart5 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";