From patchwork Fri Mar 26 17:58:07 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 409535 Delivered-To: patch@linaro.org Received: by 2002:a02:8562:0:0:0:0:0 with SMTP id g89csp1641667jai; Fri, 26 Mar 2021 10:59:20 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxAWVccC7zOXU7SiOUyAnmc+XLHApJZH9e23xf5GWC3oRu7Z7fLLxefd2JOSYUyWQyZpDA4 X-Received: by 2002:a05:6402:1713:: with SMTP id y19mr16561484edu.52.1616781560151; Fri, 26 Mar 2021 10:59:20 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1616781560; cv=none; d=google.com; s=arc-20160816; b=BkOfYhyhnSKFVpmM6ZpU6Z66sFM+Ct974p9vdqd6rwKpYMNLsrYR9nZnBcwK2zY4eF JXDBKA+B7pVbzNiU9n1mQmiyfvVYXqkpXGzkJ9VVdDWBJTvC5vYroMAuAGAx14Zs5HBV E/LUkFGYBh89eB8icoGdw3KC1cEwqxgbOsSboZl8hVtK02aZSfpQanufEaIH1yFtEecU MhkoK81gyDW0bI0k/9yAMItzhtucuKb+bxSHid//TmP1bS+zAWRblW9AJI7pVTkN68aB spOIKznY7ySdKdA76mDJE+8onddIWfc/fIyT0dD5qXL6CeebT3FVBq+E8j9GYv7J91J9 kePA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=apQCWP1ts1oa30XdCThQ+Bzfibdl2QjOaHGr8QnRazg=; b=0au3IWW3yP4OSWVr88BnJcMSLMp1ymIXIzpXk/4QrFJdC/OWHZrVD2s/RqVIPQVAvP t1OMTCxU5Ng4+Q0PF+N7p8+kD5aaBuCOpiZiYh/nClmpDiT2g4DfLLU5vc14tQ9TC8GA yvY/8hJK0daWzvZXttdHCwhRy3qtfYbVKqTCNCjMoHcmYNQhVKYluSDv+TclT71+Rz5Y zCV7pONBjImR/m4ME//Dqmij1lH4k2V1/iP41Z2KBN9U2eY3iCrlc+4igXzCw1s8dukS qU37BykSa+1x+vG0KU3sKS7hp+Fyzvsy6s7EUYz0yjxAkjKy24dBk0XKwmE203xfkBVB c2sg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=UDMcYxIX; spf=pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id b6si8744646ejb.254.2021.03.26.10.59.19; Fri, 26 Mar 2021 10:59:20 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=UDMcYxIX; spf=pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230305AbhCZR6p (ORCPT + 17 others); Fri, 26 Mar 2021 13:58:45 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40560 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230292AbhCZR6R (ORCPT ); Fri, 26 Mar 2021 13:58:17 -0400 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2F342C0613B2 for ; Fri, 26 Mar 2021 10:58:17 -0700 (PDT) Received: by mail-lf1-x136.google.com with SMTP id w37so8871296lfu.13 for ; Fri, 26 Mar 2021 10:58:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=apQCWP1ts1oa30XdCThQ+Bzfibdl2QjOaHGr8QnRazg=; b=UDMcYxIX1C/boSFbqw5s+IyImS6KXOloruimDLAtph6G92SYoprxj5sGp7f37DMBue vHj6AAZP3TGz292JgoMQGtkBUGta6eAZew7IABf9udb0eRunjzxg/+SUCy6GfeVY5WpS b6yug4EkUBVtOzobN78q3t4rf6WXEIYbTuuhZrSBpSTXklDJ/HgpRH2FjyWbQ0sLc6Ar V0/jLt3iR7+Ay/5G7V/ydXcw1DcSp2Kvgo+COT7kCox4ytEdY3ZM3u0WFCQc/jxfSlZ5 DIV4zbHt4JZtLB1P0P5DzgZ4h0cU6fniGTC0qUdbcSyNPymCee/xr6CWWomSbPnXMt2l DcQQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=apQCWP1ts1oa30XdCThQ+Bzfibdl2QjOaHGr8QnRazg=; b=PCMOGWRBotENLw7jxkEzt1BxiItH7oUyoG5u2LxBuYQ/smnU2ZIkBPJ7RVSc39yHKz nCfBG3i/v8yoOAI9NOjFc+u+P72eKMn7FVyz6DkNUSScR2oXDs88aWhKDGAeaeoPC+SR AKi6blVNdDgUD3rhfEm/Pnppohh7Uv7OU/cvCNcq0Ud6s20rjVsmwaUS5wWBngo68bRF atfWMQY14hi8CxSg6kTSdGh+CfA4TN0xCNID6GgbqqbsZQ80Kbq9Eoa2hVsfK5T/OMmZ Znsxd5DPfmhbQri50dmjOAUtqqS+/AbWs1tPO28HjnvtSJdEIbqnaQLUCYXqJeYgEhuu zN6g== X-Gm-Message-State: AOAM5321FewzA062FnG3CT6SOPtjzkUGe8jOFh+CVXvEW5ZbgEXlRW1g bWtWqVTfgtmf+cGcrFGbCdayUw== X-Received: by 2002:a05:6512:2356:: with SMTP id p22mr8596264lfu.347.1616781495530; Fri, 26 Mar 2021 10:58:15 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id f3sm1249554ljm.5.2021.03.26.10.58.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 26 Mar 2021 10:58:15 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Vinod Koul , Kishon Vijay Abraham I , Rob Herring Cc: Manu Gautam , Stephen Boyd , Jonathan Marek , linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v4 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy Date: Fri, 26 Mar 2021 20:58:07 +0300 Message-Id: <20210326175809.2923789-6-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20210326175809.2923789-1-dmitry.baryshkov@linaro.org> References: <20210326175809.2923789-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform). Signed-off-by: Dmitry Baryshkov --- drivers/phy/qualcomm/phy-qcom-qmp.c | 388 ++++++++++++++++++++++++++-- drivers/phy/qualcomm/phy-qcom-qmp.h | 40 ++- 2 files changed, 406 insertions(+), 22 deletions(-) -- 2.30.2 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 097bc005ba43..a47da2fff7a1 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1840,6 +1840,86 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), }; +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f), +}; + +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04), +}; + +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08), +}; + +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08), +}; + +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08), +}; + +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20), +}; + static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08), QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34), @@ -2488,11 +2568,10 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { { 0x1f, 0xff, 0xff, 0xff } }; -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, unsigned int drv_lvl, unsigned int emp_post) { const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; unsigned int v_level = 0, p_level = 0; - u32 bias_en, drvr_en; u8 voltage_swing_cfg, pre_emphasis_cfg; int i; @@ -2501,29 +2580,42 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) p_level = max(p_level, dp_opts->pre[i]); } - if (dp_opts->lanes == 1) { - bias_en = 0x3e; - drvr_en = 0x13; - } else { - bias_en = 0x3f; - drvr_en = 0x10; - } - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; /* TODO: Move check to config check */ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) - return; + return -EINVAL; /* Enable MUX to use Cursor values from these registers */ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; - writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); - writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); - writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); - writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); + writel(voltage_swing_cfg, qphy->tx + drv_lvl); + writel(pre_emphasis_cfg, qphy->tx + emp_post); + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl); + writel(pre_emphasis_cfg, qphy->tx2 + emp_post); + + return 0; +} + +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 bias_en, drvr_en; + + if (qcom_qmp_phy_configure_dp_swing(qphy, + QSERDES_V3_TX_TX_DRV_LVL, + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0) + return; + + if (dp_opts->lanes == 1) { + bias_en = 0x3e; + drvr_en = 0x13; + } else { + bias_en = 0x3f; + drvr_en = 0x10; + } writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN); writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); @@ -2531,12 +2623,10 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); } -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy) +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy) { - const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; - u32 val, phy_vco_div, status; - unsigned long pixel_freq; + u32 val; + bool reverse = false; val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN; @@ -2559,6 +2649,19 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy) writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL); writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE); + + return reverse; +} + +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy) +{ + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 phy_vco_div, status; + unsigned long pixel_freq; + + qcom_qmp_phy_configure_dp_mode(qphy); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL); writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL); @@ -2641,6 +2744,204 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) return 0; } +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) +{ + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_DP_PHY_PD_CTL); + + /* Turn on BIAS current for PHY/PLL */ + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN); + + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0); + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1); + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2); + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3); + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4); + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5); + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6); + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7); + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8); + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9); + qphy->dp_aux_cfg = 0; + + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | + PHY_AUX_REQ_ERR_MASK, + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK); +} + +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) +{ + /* Program default values before writing proper values */ + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); + + qcom_qmp_phy_configure_dp_swing(qphy, + QSERDES_V4_TX_TX_DRV_LVL, + QSERDES_V4_TX_TX_EMP_POST1_LVL); +} + +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) +{ + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 phy_vco_div, status; + unsigned long pixel_freq; + u32 bias0_en, drvr0_en, bias1_en, drvr1_en; + bool reverse; + + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1); + + reverse = qcom_qmp_phy_configure_dp_mode(qphy); + + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1); + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2); + + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL); + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL); + + switch (dp_opts->link_rate) { + case 1620: + phy_vco_div = 0x1; + pixel_freq = 1620000000UL / 2; + break; + case 2700: + phy_vco_div = 0x1; + pixel_freq = 2700000000UL / 2; + break; + case 5400: + phy_vco_div = 0x2; + pixel_freq = 5400000000UL / 4; + break; + case 8100: + phy_vco_div = 0x0; + pixel_freq = 8100000000UL / 6; + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV); + + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000); + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq); + + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG); + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG); + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG); + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG); + + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL); + + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); + + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + /* + * At least for 7nm DP PHY this has to be done after enabling link + * clock. + */ + + if (dp_opts->lanes == 1) { + bias0_en = reverse ? 0x3e : 0x15; + bias1_en = reverse ? 0x15 : 0x3e; + drvr0_en = reverse ? 0x13 : 0x10; + drvr1_en = reverse ? 0x10 : 0x13; + } else if (dp_opts->lanes == 2) { + bias0_en = reverse ? 0x3f : 0x15; + bias1_en = reverse ? 0x15 : 0x3f; + drvr0_en = 0x10; + drvr1_en = 0x10; + } else { + bias0_en = 0x3f; + bias1_en = 0x3f; + drvr0_en = 0x10; + drvr1_en = 0x10; + } + + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN); + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); + udelay(2000); + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); + + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); + + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); + + return 0; +} + +/* + * We need to calibrate the aux setting here as many times + * as the caller tries + */ +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy) +{ + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d }; + u8 val; + + qphy->dp_aux_cfg++; + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings); + val = cfg1_settings[qphy->dp_aux_cfg]; + + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1); + + return 0; +} + static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -3346,6 +3647,46 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; +static const struct qmp_phy_cfg sm8250_dpphy_cfg = { + .type = PHY_TYPE_DP, + .nlanes = 1, + + .serdes_tbl = qmp_v4_dp_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl), + .tx_tbl = qmp_v4_dp_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3), + + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3phy_regs_layout, + + .has_phy_dp_com_ctrl = true, + .is_dual_lane_phy = true, + + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init, + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx, + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy, + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate, +}; + +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = { + .usb_cfg = &sm8250_usb3phy_cfg, + .dp_cfg = &sm8250_dpphy_cfg, +}; + static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -4601,6 +4942,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sm8250-qmp-usb3-phy", .data = &sm8250_usb3phy_cfg, + }, { + .compatible = "qcom,sm8250-qmp-usb3-dp-phy", + /* It's a combo phy */ }, { .compatible = "qcom,sm8250-qmp-usb3-uni-phy", .data = &sm8250_usb3_uniphy_cfg, @@ -4635,6 +4979,10 @@ static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = { .compatible = "qcom,sc7180-qmp-usb3-dp-phy", .data = &sc7180_usb3dpphy_cfg, }, + { + .compatible = "qcom,sm8250-qmp-usb3-dp-phy", + .data = &sm8250_usb3dpphy_cfg, + }, { } }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 981d8ee891c0..67bd2dd0d8c5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -397,6 +397,7 @@ #define QSERDES_V3_DP_PHY_STATUS 0x0c0 /* Only for QMP V4 PHY - QSERDES COM registers */ +#define QSERDES_V4_COM_BG_TIMER 0x00c #define QSERDES_V4_COM_SSC_EN_CENTER 0x010 #define QSERDES_V4_COM_SSC_PER1 0x01c #define QSERDES_V4_COM_SSC_PER2 0x020 @@ -404,7 +405,9 @@ #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0 0x028 #define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1 0x030 #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1 0x034 +#define QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN 0x044 #define QSERDES_V4_COM_CLK_ENABLE1 0x048 +#define QSERDES_V4_COM_SYS_CLK_CTRL 0x04c #define QSERDES_V4_COM_SYSCLK_BUF_ENABLE 0x050 #define QSERDES_V4_COM_PLL_IVCO 0x058 #define QSERDES_V4_COM_CMN_IPTRIM 0x060 @@ -415,6 +418,7 @@ #define QSERDES_V4_COM_PLL_CCTRL_MODE0 0x084 #define QSERDES_V4_COM_PLL_CCTRL_MODE1 0x088 #define QSERDES_V4_COM_SYSCLK_EN_SEL 0x094 +#define QSERDES_V4_COM_RESETSM_CNTRL 0x09c #define QSERDES_V4_COM_LOCK_CMP_EN 0x0a4 #define QSERDES_V4_COM_LOCK_CMP1_MODE0 0x0ac #define QSERDES_V4_COM_LOCK_CMP2_MODE0 0x0b0 @@ -428,16 +432,24 @@ #define QSERDES_V4_COM_DIV_FRAC_START1_MODE1 0x0d8 #define QSERDES_V4_COM_DIV_FRAC_START2_MODE1 0x0dc #define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0 +#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0 0x0ec +#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0 0x0f0 +#define QSERDES_V4_COM_VCO_TUNE_CTRL 0x108 #define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c #define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110 #define QSERDES_V4_COM_VCO_TUNE2_MODE0 0x114 #define QSERDES_V4_COM_VCO_TUNE1_MODE1 0x118 #define QSERDES_V4_COM_VCO_TUNE2_MODE1 0x11c #define QSERDES_V4_COM_VCO_TUNE_INITVAL2 0x124 +#define QSERDES_V4_COM_CMN_STATUS 0x140 #define QSERDES_V4_COM_CLK_SELECT 0x154 #define QSERDES_V4_COM_HSCLK_SEL 0x158 #define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL 0x15c +#define QSERDES_V4_COM_CORECLK_DIV_MODE0 0x168 #define QSERDES_V4_COM_CORECLK_DIV_MODE1 0x16c +#define QSERDES_V4_COM_CORE_CLK_EN 0x174 +#define QSERDES_V4_COM_C_READY_STATUS 0x178 +#define QSERDES_V4_COM_CMN_CONFIG 0x17c #define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184 #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0 @@ -446,19 +458,32 @@ #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8 /* Only for QMP V4 PHY - TX registers */ +#define QSERDES_V4_TX_CLKBUF_ENABLE 0x08 +#define QSERDES_V4_TX_TX_EMP_POST1_LVL 0x0c +#define QSERDES_V4_TX_TX_DRV_LVL 0x14 +#define QSERDES_V4_TX_RESET_TSYNC_EN 0x1c +#define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN 0x20 +#define QSERDES_V4_TX_TX_BAND 0x24 +#define QSERDES_V4_TX_INTERFACE_SELECT 0x2c #define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34 #define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38 #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40 +#define QSERDES_V4_TX_TRANSCEIVER_BIAS_EN 0x54 +#define QSERDES_V4_TX_HIGHZ_DRVR_EN 0x58 +#define QSERDES_V4_TX_TX_POL_INV 0x5c +#define QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN 0x60 #define QSERDES_V4_TX_LANE_MODE_1 0x84 #define QSERDES_V4_TX_LANE_MODE_2 0x88 #define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c +#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8 +#define QSERDES_V4_TX_TX_INTERFACE_MODE 0xbc #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0 #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4 -#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8 -#define QSERDES_V4_TX_PI_QEC_CTRL 0x104 +#define QSERDES_V4_TX_VMODE_CTRL1 0xe8 +#define QSERDES_V4_TX_PI_QEC_CTRL 0x104 /* Only for QMP V4 PHY - RX registers */ #define QSERDES_V4_RX_UCDR_FO_GAIN 0x008 @@ -515,6 +540,17 @@ #define QSERDES_V4_RX_DCC_CTRL1 0x1bc #define QSERDES_V4_RX_VTH_CODE 0x1c4 +/* Only for QMP V4 PHY - DP PHY registers */ +#define QSERDES_V4_DP_PHY_CFG_1 0x014 +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK 0x054 +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_CLEAR 0x058 +#define QSERDES_V4_DP_PHY_VCO_DIV 0x070 +#define QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL 0x078 +#define QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL 0x09c +#define QSERDES_V4_DP_PHY_SPARE0 0x0c8 +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8 +#define QSERDES_V4_DP_PHY_STATUS 0x0dc + /* Only for QMP V4 PHY - UFS PCS registers */ #define QPHY_V4_PCS_UFS_PHY_START 0x000 #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004