diff mbox series

[v4,3/4] pinctrl: qcom/pinctrl-spmi-gpio: Arrange compatibles alphabetically

Message ID 20210629123407.82561-4-bhupesh.sharma@linaro.org
State Accepted
Commit 4afc2a0c62a372a923cfb06182af387425489b7c
Headers show
Series pinctrl: qcom/pinctrl-spmi-gpio: Add support for pmic-gpio on SA8155p-adp | expand

Commit Message

Bhupesh Sharma June 29, 2021, 12:34 p.m. UTC 
Arrange the compatibles inside qcom pinctrl-spmi gpio driver
alphabetically.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 34 ++++++++++++------------
 1 file changed, 17 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index a89d24a040af..5246ea09c295 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1104,23 +1104,15 @@  static int pmic_gpio_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id pmic_gpio_of_match[] = {
-	{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
-	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
-	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
-	/* pm8950 has 8 GPIOs with holes on 3 */
-	{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
-	{ .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
-	{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
-	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
-	{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
-	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
-	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
-	/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
-	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
 	/* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */
 	{ .compatible = "qcom,pm660-gpio", .data = (void *) 13 },
 	/* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */
 	{ .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
+	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
+	{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
 	/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
 	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
 	/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
@@ -1130,13 +1122,21 @@  static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
+	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
+	/* pm8950 has 8 GPIOs with holes on 3 */
+	{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
+	{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
+	{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
+	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+	{ .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
+	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
+	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
 	{ .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
-	{ .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
 	{ .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
-	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
-	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
-	{ .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
+	/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
+	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
 	/* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */
 	{ .compatible = "qcom,pmx55-gpio", .data = (void *) 11 },
 	{ },